ATTENDING DAY TO DAY E/M INTERNAL MAINT WORKS AND COMPLAINTS OF OTM ACCN AND REPAIR REPLACEMENT OF APFC PANELS AND OTHER CONNECTED ITEMS UNDER GE I GOS

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing without andulations complete all as specified and directed. Note:- All old unsv credit materials should be deposited in MES yard day wise after completed of the job, the same material will be issued to contractor through gate pass as schedule of credit against after completion of the work.

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through in PVC Conduit 20/25 mm dia medium grade ISI marked (MMS) at any height/places and all accessories are concealed in walls / roofs / floors / ceiling etc. including suitable arrangements for flush mounting modular MS/GI boxes as per site requirement/suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed for the One light point controlled by one 10amps switch.

All as per item no. 3 but for One fan point controlled by one switch 10 amps, and one regulator.

All as per item no. 3 but for One exhaust fan point controlled by one 10 amps switch .

All as per item no. 3 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per item no. 3 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on same board .

All as per item no. 3 but for One bell/buzzer point controlled by one bell push.

All as per item no. 3 but for One light point controlled by two 2 way switches/bed switch point

All as per item no. 3 but for point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm incl circuit wiring complete all as specified and directed for the One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on independent board.

All as per item no. 10 but for One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item no. 3 but for point wiring with 4.0 sqmm and earth conductor of size 4 sqmm incl circuit wiring complete all as specified and directed.

M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed, multistranded, single core, copper cable 1100 volts grade cables drawn through PVC casing and caping 20/25 mm width double locking medium grade ISI marked (MMS) at any height and all accessories such as Tee,bend,short piece & elbow on surface on walls / roofs / floors / ceiling etc. including providing suitable arrangements for flush mounting modular MS boxes as per site requirement/suitable for modular top cover and frame for fixing of modular switches,sockets,fan regulators, blank plate etc and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directed for the One light point controlled by on switch

All as per item no. 13 but for One fan point controlled by one switch and regulator

All as per item no. 13 but for One exhaust fan point controlled by one switch.

All as per item no. 13 but for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

All as per item no. 13 but for One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

All as per item no. 13 but for One bell point controlled by one bell push.

All as per item no. 13 but for One light point controlled by two 2 way switches.

All as per item no. 13 but for point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm and incl providing circuit wiring complete all as specified and directed for One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on independent board.

All as per item no. 20 but for One 6 pin 6/16 amps socket outlet point controlled by one 16 amps switch on same board.

All as per item no. 13 but for point wiring with 4.0 sqmm and earth conductor of size 4 sqmm incl providing circuit wiring complete all as specified and directed.

Supply & fixing and fixing in repairs modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type bell push 6 Amps,1 module, single pole, 240 volts,AC, ISI Marked complete all as specified and directed

Supply & fixing and fixing in repairs modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed .

Supply & fixing and fixing in repairs red color lighting indication lamp 6 Amps, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 0 to 4/5 steps, ISI Marked complete all as specified and directed.

Supply & fixing and fixing in repairs call bell AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed.

Supply & fixing and fixing in repairs call bell ding dong AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed.

Supply & fixing and fixing in repairs angle lamp holder, insulated body with back plate for batten fittings complete all as specified and directed.

Supply & fixing and fixing in repairs ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed.

Supply & fix decorative box type 20 watt light fitting,blue coloured end caps, pre-wired and including providing single/double side LED tubelight(tube rod) white/warm 20 watt-01 No made of aluminium extrusion with high efficient LED driver,IP-20, Tube efficiency of 100lm/w, including PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed.

Supply & fix decorative box type 9 watt light fitting,blue coloured end caps, pre-wired providing single side LED tube 9 watt-01 No, and including PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed.

Supply and fixing, in repairs 20 watt LED pride plus NXT batten white/warm decorative type,high quality materials,240V,50Hz, and slim integrated body,easy to install,PC diffuser and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Taking down old unsv light fitting from existing location and Supply and fixed aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrically illumination 2'x2' LED 40/42 Watt(600x600x70mm) light fitting and including providing internally prewired,LED driver,connector and also can be suspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fitting complete all as specified and directed.

Taking down old unsv light fitting from existing location and Supply and fixed in repairs recess mounting 2'x2' LED 40/42 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting complete all as specified and directed complete all as specified and directed.

Supply and fixing, in repairs 40 watt LED pride plus NXT batten, warm light decorative type,high quality materials,240V,50Hz, and slim integrated body,easy to install,PC diffuser and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make:- Havells/Philips/Crompton as approved by GE

Supply and fixing, in repairs 20 watt LED batten nicolaus glamtube integrated design, easy to install,efficency,125 lm/w,PC diffuser and robust housing, high quality materials,pre-wired and connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply and fixing , in repairs 36 watts LED supernova light fitting high wattage complete ,energy efficient, integrated design, easy to install,PC diffuser, high quality materials,pre-wired incl connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply & fixing, in repairs 40 watt LED light fitting white lighting, high quality materials and intergrated design, PC diffuser, reliable and robust housing structure, easy to install, necessary arrangements for fixing with LED fitting to ceiling rose complete all as specified and directed.

Supply & fixing , in repairs 20 watts LED Austra mirror light fitting,contemporary design decorative LED lighting with extruded polycarbonate, environmental friendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired incl connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply & fixing, in repairs glaze model type wall mounting light fitting 9 watt and incl LED lamp(White/Warm) decorative type,in durable plastic body & designer mesh in gold finish incl connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed .

Supply & fixing , in repairs floret model type wall mounting light 9 watt and incl LED lamp(White/Warm) decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose and incl removing old unserviceable fitting complete all as specified and directed.

Supply & fixing, in repairs sana model type wall mounting light 9 watt and incl LED lamp(White/Warm) decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed .

Supply & fixing, in repairs city-2 model type wall mounting light 9 watt and incl LED lamp(White/Warm) decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose and incl removing old unserviceable fitting complete all as specified and directed .

Supply & fixing, in repairs city-3 model type wall mounting light 9 watt and incl LED lamp(White/Warm) decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose and incl removing old unserviceable fitting complete all as specified and directed .

Supply & fixing , in repairs globe model type wall mounting light 9 watt and incl LED lamp(White/Warm)decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose and incl removing old unserviceable fitting complete all as specified and directed .

Supply & fixing , in repairs SS housing model type wall bracket light 9 watt and incl LED lamp(White/Warm)decorative type,in durable plastic body & designe incl connect with LED fitting to ceiling rose and incl removing old unserviceable fitting complete all as specified and directed.

Supply & fixing , in repairs energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.

Supply & fixing , in repairs LED bldg secruity light fitting of capacity 35 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65/66 protection and including removing of old unserviceable item complete all as specified and directed.

Supply & fixing , in repairs LED bldg secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65/66 protection and including removing of old unserviceable item complete all as specified and directed.

Supply and fix GI bracket pipe of size 25 to 32 mm dia as suitable medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 20X4 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.

Supply & fixing , in repairs 70 Watt LED fitting energy saving,environmental friendly,long life with SMD LEDs as light source with driver included, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with inbuilt surge protector and cable connection from ceiling rose to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.

Supply & fixing , in repairs LED track light fitting of capacity 20 Watt LED with incl providing fixing arrangements suitable roof/ceiling etc. in aluminium PDC AL housing,clear diffuser IP-20 protection and including removing of old unserviceable item complete all as specified and directed.

Supply & fixing , in repairs LED spike light fitting of capacity 12 Watt LED with incl providing fixing arrangements with die cast aluminium PDC AL housing,clear diffuser IP-66 protection and including removing of old unserviceable item complete all as specified and directed.

Supply & fixing , in repairs LED bush light fitting of capacity 12 Watt LED with incl providing fixing arrangements with die cast aluminium PDC AL housing,clear diffuser IP-66 protection and including removing of old unserviceable item complete all as specified and directed.

Supply & fixing , in repairs in sheet metal enclosure with DD/AD type, 415 volts AC,TPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

Supply & fixing , in repairs in sheet metal enclosure double door ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

Supply & fixing , in repairs sheet metal enclosure, , double door, 240 volts AC,SPN,DB, 16 way, flush mounting with 200amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed.

All as per item No.62 but 12 way SPN DB,DD,240v complete all as specified and directed.

All as per item No.62 but 8 way SPN DB,DD 240v complete all as specified and directed.

All as per item No.62 but 4 way SPN DB,DD 240v complete all as specified and directed.

All as per item No.62 but 2 way SPN DB,SD 240v complete all as specified and directed.

Supply & fix and fixing in repairs mini MCB,32 A,DP 'C and motor starter with socket including with suitable sunken box in concealed/surface and internally connected properly suitable for cooking electrical appliances including protection and including removing old unserviceable items and making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.

Supply & fix and fixing in repairs MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and fixing in repairs MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and fixing in repairs MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and fixing in repairs MCB TPN 32 to 40 Amps 10 KA,"C" series,AC,440Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

Supply & fix and fixing in repairs MCB TPN 40 to 63/100 Amps 10 KA,"C" series,AC,440Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.

M & L for sub main wiring complete in repairs with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn drawn through and including PVC conduit in concealed ISI marked medium grade(MMS) accessories such as Tee,corner, overlaping connector etc and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

All as per item No .73, but 2 run x 6 sqmm+1 run earth wire complete all as specified and directed.

All as per item No .73, but 2 run x 4 sqmm+1 run earth wire complete all as specified and directed.

All as per item No .73, but 2 run x 2.5 sqmm+1 run earth wire complete all as specified and directed.

All as per item No .73, but 2 run x 1.5 sqmm+1 run earth wire complete all as specified and directed.

Supply & fix and fixing in repairs suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed.

Supply & fix and fixing in repairs MCCB, 125 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed.

Taking down old unsv ceiling fan from existing location and supply and fix ceiling fan with blades, down rods, and connected accessories, 230 V, 1200 mm sweep, with squirrel cage induction motor, anti dust painted, dust free,high speed. Star rated complete all as specified and directed.

Taking down old unsv ceiling fan from existing location and supply and fix ceiling fan with blades, down rods, and connected accessories, 230 V, 1400 mm sweep, with squirrel cage induction motor, anti dust painted, dust free,high speed. Star rated complete all as specified and directed.

Taking down old unsv exhaust fan from existing location and supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers complete all as specified and directed.

Taking down old unsv exhaust fan from existing location and supply and fix new exhaust fan, steel body AC single phase.230Volts of size 150 mm sweep with blades and frame with louvers complete all as specified and directed.

Taking down old unsv exhaust fan from existing location and supply and fix new exhaust fan, steel body AC single phase.230Volts of size 200 mm sweep with blades and frame with louvers complete all as specified and directed.

Taking down old unsv exhaust fan from existing location and supply and fix new exhaust fan, steel body AC single phase.230Volts of size 230-250 mm sweep with blades and frame with louvers complete all as specified and directed.

Taking down old unsv exhaust fan from existing location and supply and fixing new exhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm complete all as specified and directed.

Taking down old unsv exhaust fan from existing location and supply and fixing new exhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 200 mm complete all as specified and directed.

Taking down old unsv wall fan from existing location and supply and fixing wall fan 450 mm Hi-sweep, 50 watts with double string, low noise, air delivery 70CMM, RPM-1320, overload thermal protector, 240 volts, 50 Hz complete all as specirfied and directed.

Taking down old unserviceable geyses of any capacity from work site at any height and deposit to MES store yard for safe custody and Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve,thermostat, NRV, Hot water and Cold water heavy duty connection pipes-02 Nos,holefasterns-04 Nos and necessary accessories as per site requirement etc.complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 32 X 6 mm with suitable GI LG pipe from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 40 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed.

S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections cablesincluding cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.

Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature size GI jali and proper aluminium frame to avoid insect protection fix at inner surface of wall and making good the disturbed surface area complete all as specified and directed.

Supply and fixing TV sockets one module with top cover plate and inner frame including all necessary accessories and including removing of old unserviceable item complete all as specified and directed.Make:-Havells (crabtree)/Legrand/Schneider or as approved by GE

Supply & fix and fixing in repairs Telephone socket(RJ11) one module with top cover plate and inner frame including all necessary accessories and including removing of old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs 20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary civil works,nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs 40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protection and providing suitable fixing arrangements such as necessary civil work, nuts,bolts and washers and including removing old unserviceable item complete all as specified and directed.

Supply & fix and fixing in repairs LED flood light light fitting of capacity 170 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP-65 protection and including removing of old unserviceable item complete all as specified and directed.

All as per item No.98 but capacity 120 watts,240V,LED light fitting complete all as specified and directed

All as per item No.98 but capacity 100 watts,240V,LED light fitting complete all as specified and directed

All as per item No.98 butcapacity 70 watts,240V,LED light fitting complete all as specified and directed

Supply and fixing and in repairs galvanised metal flush box 1/2 module ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

All as per item No-102 but meteal box 3 module

All as per item No-102 but meteal box 4/5 module

All as per item No-102 butmeteal box 6 module

All as per item No-102 but meteal box 8/9 module

All as per item No-102 but meteal box 12 module

All as per item No-102 but meteal box 16 module

All as per item No-102 but meteal box 18 module

Supply and fixing in repairs modular any type cover plate with frame 1 module,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

All as per item No-110 but modular any type cover plate with frame 2 module

All as per item No-110 but modular any type cover plate with frame 3 module

All as per item No-110 but modular any type cover plate with frame 4/5 module

All as per item No-110 but modular any type cover plate with frame 6 module

All as per item No-110 but modular any type cover plate with frame 8/9 module

All as per item No-110 but modular any type cover plate with frame 12 module

All as per item No-110 but modular any type cover plate with frame 16 module

All as per item No-110 but modular any type cover plate with frame 18 module

Taking down and Hanging only ceiling fan, wall fans after cleaning and connecting up including provision of cable from ceiling rose/switch socket or connector to fan and including providing necessary accessories complete all as specified and as directed.

Taking down and fitting only exhaust fan after cleaning and connecting up including provision of cable from ceiling rose or connector to fan and including providing necessary accessories complete all as specified and as directed.

Fixing only and connecting electric meters 10-60 Amps any type single or three phase complete all as specified and directed and including providing necessary accessories complete all as specified and as directed.

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixing single phase electronic meters temper proof LCD display with polycarbonate cover 230Volts,10-60 Amps, accuracy class-I,50Hz, confirming to IS-13779,IP-54,with parameters to show data,time current reading,load,PF,voltage and KWH including connected necessary items for functioning complete all as specified and directed.

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and Supply only three phase electronic meters temper proof LCD display with polycarbonate cover 415Volts,10-60 Amps, accuracy class-I,50Hz, confirming to IS-13779,IP-54,with parameters to show data,time current reading,load,PF,voltage and KWH including connected necessary items for functioning complete all as specified and directed.

Supply and fix in repairs of PVC round cover blanking plate of size 2'' to 6'/ as per site requirement with screws of existing fan junctions/ wiring junctions boxes/ loop boxes etc

supply and fixing hylem sheet of size 4"x 6" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

supply and fixing hylem sheet of size 4"x 8" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

supply and fixing hylem sheet of size 6"x 8" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

supply and fixing hylem sheet of size 8"x 10" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

supply and fixing hylem sheet of size 10"x 12" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

supply and fixing hylem sheet of size 12"x 18" with necessary screws and fixing arrangement at any height/roop etc complete all as specified and directed.

Supply and fixing 1 or 2 module fan regulator piano switch type/socket type as per site requirement, electronic, stepped type, 100/120 Watts,240Volts,AC,ISI marked complete all as specified and directed.

Supply and fixing switch piano type, 6 Amps, flush mounted,1 way, 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fixing bell push 6 Amps,240 volts, ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fixingswitch socket outlet 6Amps,5 pin,flush type 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fixing switch socket combination 6Amps,5 pin, flush type 240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fixing switch socket combination 6/16Amps,6pin 240 volts with neon indicator type,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fixing switch socket combination 6/16Amps,6pin ,240 volts,ISI marked and including removing old unserviceable item complete all as specified and directed.

Supply and fixing junction boxe top plastic round cover,four terminals and including removing old unserviceable item complete all as specified and directed.

Taking down old unsv light fitting from existing location and Supply and fixed in repairs recess mounting 6 Watt LED,220 Volts,AC,round/square light fitting(white&warm) with LED strip and lamp including connecting up with ceiling rose to fitting complete all as specified and directed complete all as specified and directed.

All as per item No. 139 but for 12 watts complete all as specified and directed complete all as specified and directed.

All as per item No. 139 but for 15 watts complete all as specified and directed complete all as specified and directed.

All as per item No. 139 but for 9 watts complete all as specified and directed complete all as specified and directed.

All as per item No. 139 but for3 watts complete all as specified and directed complete all as specified and directed.

All as per item No. 139 but for 18 watts complete all as specified and directed complete all as specified and directed.

All as per item No. 139 but for 24 watts complete all as specified and directed complete all as specified and directed.

Taking down old unsv light fitting from existing location and Supply and, fixed in repairs flexible neo LED strips 24 watt 6000k ,240Volts ,standard length ,single phase with uniform light distribution and long lasting adhesive for perfect cove light,colour as per required and including all connected accessories suitable for proper fixing as per site requirement complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth and getting out soft/loose soil, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed by Engr-in-Charge.

Removing surplus soil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point, complete, all as specified and directed by Engr-in-Charge.

Supply and laying double wall corrugated (DWC) HDPE pipe 50 mm outer dia for protection of UG cable as per IS: 16205 (part 24) of 2017 complete all as specified.

Supply and laying double wall corrugated (DWC) HDPE pipe 63 mm outer dia for protection of UG cable as per IS: 16205 (part 24) of 2017 complete all as specified.

Supply and laying double wall corrugated (DWC) HDPE pipe 90 mm outer dia for protection of UG cable as per IS: 16205 (part 24) of 2017 complete all as specified

All as per item no. 153 but for 70 KVAR to 125 KVAR

Supply and fix Contactors capacitor duty rating 3 phase 415 V suitable for 3 KVAR Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fixContactors capacitor duty rating 3 phase 415 V suitable for 5 KVAR Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix Contactors capacitor duty rating 3 phase 415 V suitable for 10 KVAR Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix Contactors capacitor duty rating 3 phase 415 V suitable for 15 KVAR Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix Contactors capacitor duty rating 3 phase 415 V suitable for 20 KVAR Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix Contactors capacitor duty rating 3 phase 415 V suitable for 25 KVAR Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix timer 5 A 0 - 60 seconds 230 V Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix display/relay unit computerised control of Power Factor Digital type 4 steps 440 V Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix display/relay unit computerised control of Power Factor Digital type 8 steps 440 V Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix display/relay unit computerised control of Power Factor Digital type 12 steps 440 V Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix LED Indicator 20mm dia replaced by old indicator Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply and fix LED Indicator 15mm dia replaced by old indicator Make:- L&T / HAVELLS/ ABB / SIEMENS

Taking down U/S MCB Supply & Fix MCB TP pole 63A .10 KA 415 V Make:- L&T / HAVELLS/ ABB / SIEMENS

Taking down U/S switch ,Supply &Fix switch fuse unit TPN 500 Volts 3 phase with HRC fuses suitable for interior mounting in panel of capacity of 63 Amps each Make:- L&T / HAVELLS/ ABB / SIEMENS

Taking down U/S MCCB ,Supply & Fix MCCB 3/4 POLE 100 A 16 KA 415 V Make:- L&T / HAVELLS/ ABB / SIEMENS

All as per item no 170 above but 200 Amps 4 pole 36KA, 415 V Make:- L&T / HAVELLS/ ABB / SIEMENS

M&L reinsulation of burned/ deteriorated XLPE/PVC insulation of LT cable end termination connection in panels /Change overs/SFUs/MCCBs/Feeder piller boxes or on Poles with heat shrinkable LT insulation sleeves without damaging the cable or switchgears etc all as directed

Taking out old UNSV and Supply, laying, jointing and testing of XLPE insulated, armoured, heavy duty LT under ground cable 1100 Volts grade with aluminium conductor laid in trenches, on poles, through pipes, fixed to walls etc cross sectional area of 16 sqmm 4 core including taking down old, complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 Core , complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 Core , complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 Sqmm 3.5 Core , complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 Core , complete all as specified and directed.

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 Sqmm 3.5 Core , complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) TP 10 Amp to 63 Ampsof following poles and current carrying capacity in the DB complete with connection testing and commissioning , complete all as specified and directed.

M&L for rewiring of complete APFC panel of any capacity with 2.5 Sqmm of copper wire including all necessary item required on ground to complete the job all as specified and directed by Engr-in-Charge

M&L for repairing to the exisitng APFC panel by removing exisitng busbar, MCCBs, capacitor banks, contactors, MCBs, incoming and outgoing cables and repairing the APFC panel by welding hinges, fixinging nuts and bolts of suitable size, painting complete panel, proper insualation of incoming and outgoing LT cable complete all as specified and directed.

M/L for replacement of Earthing complete with GI earth plate 60x60cmx6mm thick electrode and using galvanised iron strip 32 x 6 mm as earthing lead burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 40 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point all as specified and as directed by Engr-in-charge.

S&F in repairs of AB conductor of size 95 Sqmm for Jumper connections for MRS structure and 2/4 pole Structure of Zone A and Zone B area complete all as specified and directed( Note :- Aluminium Lugs/ SS Nuts and Bolts will be measured and paid seperately,Specified date and restricted hrs of working will be available for working being essential services)

S&F in repairs PG Clamp Gal;vanised to be fixed on jumpers/aluminum conductors/AB conductors of any size complete all as specified and directed( Note : SS Nuts and Bolts will be measured and paid seperately)

Supply only Aluminium tube terminal/ lugs of Size 95 SQMM

Supply only Stainless Steel Nut Bolts with washers of 3/8 Size of 1.5 inch long

M & L Copper strip 25x5 mm for jumper connection of Transformer complete all as directed

Dismantling of old APFC panel board any size and type inclding removing of serviceable MCCB's/Change overs and keeping in custody or re use at site all as directed

M&L for Checking and inspecting of the LT outdoor type panel board switch gears throughly, including removing of the unserviceable damaged cable lugs,Nut bolts,insulation sleeves,cleaning and removing rust and painting with super enamel paint of approved colour over a coating of red oxide primer,including re insulating the incomer and out going cable leads with heat shrinkable LT sleeves complete for smooth fuctioning of LT panels. (Note :- Job include replacement of Lugs,Nut bolts,sleeves of BUS bars,heat shrinkable LT cable sleeves and connectors,Welding of Doors ,Replacement of hinges etc,Cable lugs,Nut bolts,Heat shrinkable LT sleeves will be measured and paid seperately).

Supply only Heat Shrinkable LT insulation sleeves

Taking out old UNSV XLPE/PVC insulated, armoured, heavy duty LT under ground cable 1100 Volts grade with aluminium conductor from trenches, from poles/walls etc cross sectional area for 10 Sqmm to 16 sqmm 4 / 2 Core , complete, all as specified and directed :-(Excavation/Earth wk will be measured and paid seperately)

All as per irem no. 190 but for 25 to 50 Sqmm 3.5 Core/4 core.

All as per irem no. 190 but for 70 to 120 Sqmm 3.5 Core/4 core.

Taking down rolling shutters of any size all as specified and directed

S&F steel rolling shutter as per IS 6248-1979,made of required size Ms lathes interlocked together their entire length and joined together at the ends by end locks mounted on shafts (50 mm Dia) heavy duty, thickness of lathe 1.20 mm ,gde II springs,guide channel 3.15 mm thick bottom plate 3.15 mm thick gear operated shutter with PCC 1:3:6of size wall width x 150 mm x300 mmand finishing with plaster 15 mm thick in CM 1:4 finished even and smooth all as specified and directed.

M&L MS pipe 50 to 125 mm dia as shaft including two coats of synthetic enamell paint of approved colour over a coat of red oxide primer complete all as directed and specified

S&F in repair part of steel rolling shuttersMS gear box set general complete including handle and anchoring rod as of approved quality all as specified and directed

S&F in repair ball bearing suitable for rolling shutters complete all as specified and directed

S&F in repair Guide channel 3"(3.50mmthick)mild steel deep channel section etc complete all as specified and directed

S&F in repair hood cover made of 1 mm thick GI sheet pattern ,complete all as specified and directed .

S&F in repair bottom plate 5" (2.25mm) ,complete all as specified and directed .

S&F in repair Anchoring rod of 25 mm dia of MS pipe complete all as specified and directed

S&F in repair safety lever locks MS with 4 levers complete all as specified and directed

S&F in repair MS curtains of 1 mm thick rolling shutters consisting of the assembly of lath section end - locking clips and the connecting pieces of the top complete all as specified and directed

Taking down cover hood of exisitng rolling shutters(gear operated/Mannually any size or type)carefully and completely over hauling the shutters and applying grease and oil in bearing,springs,guide channels,operating rod,shaft gear boxes,gear wheel etc straightening thoroughly shutter blade,guide channels,anchoring rods etc and fixing back the over hood in position and ensure smooth functioning of shutters after greasing and servicing complete all as directed ( worn out part for replacement will be measured and paid seperately)

M&L for preparation of new or previously untreated surfaces of steel of any description,over 10 cm in width or grith and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L preparation of old decorated steel painted surfaces of any description not other wise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr- in- charge

Refixing and testing of MCCBs serviceable retrived from site in existing panel boards including replacement of connecters nut bolts and minor spares/addn /altn required for completing the job

Replacement of power capacitor box type of the3 KVAR box type heavy duty capacitor 440V , capacities of make L&T,ABB,Siemens.

All as per item no. 208 but for 5 KVAR box type heavy duty capacitor 440V Make:- L&T / HAVELLS/ ABB / SIEMENS

All as per item no. 208 but for 10 KVAR box type heavy duty capacitor 440V Make:- L&T / HAVELLS/ ABB / SIEMENS

All as per item no. 208 but for 15 KVAR box type heavy duty capacitor 440V Make:- L&T / HAVELLS/ ABB / SIEMENS

All as per item no. 208 but for 20 KVAR box type heavy duty capacitor 440V Make:- L&T / HAVELLS/ ABB / SIEMENS

All as per item no. 208 but for 25 KVAR box type heavy duty capacitor 440V Make:- L&T / HAVELLS/ ABB / SIEMENS

Supply only PVC Electrical insulation self adhesive tape 1.8cmx7mx0.125mm for Red, Yellow, Blue & Green all as specified and directed

M & L for tube light grade galvanised with all fittings laid along the pole/in trenches / under road or floor of 40 mm bore including removing the rusted old one complete all as specified and directed.

M & L for tube light grade galvanised with all fittings laid along the pole/in trenches / under road or floor of 50 mm bore including removing the rusted old one complete all as specified and directed.

M & L for tube light grade galvanised with all fittings laid along the pole/in trenches / under road or floor of 80 mm bore including removing the rusted old one complete all as specified and directed.

Boring of holes horizontally for laying of 80mm dia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing complete all as specified and directed.

Boring of holes horizontally for laying of 40mm dia pipe (minimum depth 0.60 Mtr from top level) under road, Pavement, hard standing ,complete all as specified and directed.

M&L in repair mild steel work for Cross arms, /angle supports bracings, supports, clamps ,MS pipes and black plates fabricated from structural steel section including nuts, bolts, washers, welding ,bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including taking out existing u/s MS work complete all as directed.

M & L for Cutting and trimming of tree branches 3 mtr all around of any size which is obstructing illumination of street light and touching LT Over head line by using required tools and plants incl removing trimmed tree branches ,complete all as specified and directed.. (Note : Each cleaning will be measured and paid separetely)

Cutting chases and making good and cement work in any wall /floors and making good with PCC1:3:6 ,complete all as specified and directed.

Excavation of concreate or Road surface for laying of cables or pipes and making good the disturbed patch with PCC 1:3:6 ,complete all as specified and directed.

M&L GI pipe Light gde 15 mmdia for earth lead protection ,complete all as specified and directed.

M&L Cutting chases and making good and cement work in any wall /floors and making good with PCC and Glazed Tiles of existing size and colour and matching with the surface of walls or floors ,complete all as specified and directed.

M/L for replacement of Earthing complete with GI earth plate 60x60cmx6mm thick electrode and using GI wire of 6 mm dia as earthing lead burried directly in ground ( earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level. connected to iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of SSR Part-I and incl earth work,PCC pit and RCC cover,watering pipe 20 mm dia light grade,funnel,wire mesh,protection pipe 15 mm dia light grade up to 7.5 mtr length of earth wire,charcoal dust and salt etc and connected to earthing test point all as specified and as directed by Engr-in-charge.

M&L Earth continuity conductor of earth lead 6 mm dia galvanised iron or steel wire ,complete all as specified and directed.

Relaying of old serviceable cable 16- 50 Sqmm ,complete all as specified and directed.(Excavation/earth work,HDPE pipe will be measured and paid seperately)

Relaying of old serviceable cable 70- 120 Sqmm ,complete all as specified and directed. (Excavation/earth work HDPE pipe will be measured and paid seperately)

M&L for laying in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 Sqmm 3.5 Core ,complete all as specified and directed.