PROVN OF SECURITY WALL AND ALLIED INFRA AT NAUGAM PROVN OF SECURITY WALL AND ALLIED INFRA AT NAUGAM

Amount

Sch 'A' Part-I ( Building works) carried forward from pre-priced Schedule.

Sch 'A' Part-II Sec-I (Security Wall & Gate) carried forward from pre-priced Schedule.

Sch 'A' Part-II (Sec-II) (Security Wall & Gate) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

S&F Punched Tape Concertina Coil (including spike and handle) with 56 loops and dia 600mm, Max covered length 8 RM, having a core wire of high carbon spring steel of high tensile strength. The punched tape and copre wire (2.5 + 0.35mm dia) shall be heavy galvanized (IS-1730) (Wire-275GSM & strip-200 GSM) to provided protection against out door exposure. The punched tape shall mechanically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil. The width of strip as 19mm and spacing of blades 24.00 + 0.5 mm C/C. The weight of each coil shall be 8 + 5% Kgs without packing material and coil lenth 8 Mtr (maximum) when opened up each coil would with bituminzed hessian cloth for providing protective packing Ref specification No CQAE/5660/1620/a for raw material and drawings IMGA-0112/B (Sheet 1 of 2), IMPD-1821, IMPD-1822 complete all as specified & directed.

Sch 'A' Part-III Sec-I (Ext Elect supply Works) carried forward from pre-priced Schedule

Sch 'A' Part-III Sec-II (Ext Elect supply Works) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Supply and fixing Hot press moulded case SMC junction box with SMC base and SMC door fixed with hinge on left (L) or right side (R ). (Colour off white), MCB 2.5 Amps, 63 Amp rated bus bar of size (HxWxD) 250x200x100mm product code JSJB 2520 Make : Syntex/Hensel

Supply and fixing Endura Cityliner NEO/NEON, LED streetlight 90 W made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07. Make : Havells Cat Part No ENDURACITYLINERNEOSL90WLED757SASYBOTG complete with making connection complete all as specified and directed.

Material and labour for Reshifting / resting carefully the MES transformer capacity 250 KVA by Disconnecting and connection the all connections of 11 KV network and shift to new shed by hydra Machine to proposed Transformer shed as same by connecting the all connections carefully complete all as directed. Note : The cost of T&P shall also be included in quoted rates

Covered transformer shed, including fencing and gate complete all as shown in drawing CESZ-/TD/-1110/2011 Sheet No 1/2 to 2/2 and all as specified and as directed.

Supply and Fix Programmable time switch 24 Hours : Make Havells ,Cat .No DHTDD15016 or equivalent make as specified in Appendix ‘E’

Supply and fix Single Core copper conductor (Flexible) FRLS PVC insulated industrial Cables (Unsheathed) 1100 Volts Size 2.5 Sqmm Conforming to IS: 694 Make -Havells Cat No-WHFFDN…A12X5 or equivalent make as specified in Appendix ‘E’

Schedule 'A' Part-IV (Sec-I) (Ext. Water Supply) carried forward from pre-priced Schedule.

Sch 'A' Part-IV(Sec-II) (Ext. Water Supply) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Material and labour for MS clamp and making hole in existing GI 100/80 mm dia and fixing MS clamps flat iron (50x6mm) incl. –(02 Nos) Nut, bolts & washers duly bend to shape suitable for 100mm dia pipe, welded with GI socket 25mm dia for taking branch connection of purposed GE 25 mm dia pipe by insertion the rubber packing to leakage prof joint complete all as specified and directed by Engineer in charge. Note :- The cost of necessary earth work shall be measured and paid separately under relevant item of schedule.

Material and labour for cutting (2 cuts) and making thread at both ends cuts of existing GI pipe line of size 25mm dia in position for taking branch connection for GI pipe 25 mm dia and insertion of Tee, short pieces, socket reducer union etc. and connected accessories including excavation joints and jointing material complete all as specified Note : the cost of necessary earth work shall be measured and paid separately under relevant item of schedule.

Schedule 'A' Part-V Sec-I (Sewage Disposal) carried forward from pre-priced Schedule.

Sch 'A' Part-V Sec-II (Sewage Disposal) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Supply and fixed on site LLDPE septic tank design to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc, complete for 10 user all as specified and directed.

Schedule 'A' Part-VI (Area Drainage) carried forward from pre-priced Schedule.

Schedule 'A' Part-VII Sec-I (Internal Water Supply works) carried forward from pre-priced Schedule.

Sch 'A' Part-VII Sec-II ( (Internal Water Supply works) ) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Supply and fixing of 15mm stop cock/angle cock chromium plated complete all as specified and directed.

Sch 'A' Part-VIII Sec-I (Internal Electrification wokrs) carried forward from pre-priced Schedule

Sch 'A' Part-VIII Sec-II (Internal Electrification works) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

Supply and fix lamp holder bracket type with LED lamp 7 W, PVC/Polycarbobnate type with skirt cap suitable for batten fitting, compete all as specified and directed.

Supply ENDURA PEARL New generation energy saving and environment friendly long life LED street light fitting 20W LED 5700 K in and including LED lamps made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP 65 protection and impact resistance of IK07 complete all as specified and testing on completion and including GI wall mounting bracket 40 mm dia 1.2 Mtr long incl 30 degree bend with 02 No FI clamps 25x3mm size with necessary nut bolts etc. Make - Havells Cat part No ENDURAPEARLLSL20WLED757SASYTOPC/ Equivalent in Philips, CG .

Supply and fixing exhaust fan ventilining type of heavy duty AC single phase 230V/240V 50Hz of size, 300mm sweep 1400 rpm and complete with louvers, shutter and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts complete all as specified and as directed. make : Havells/Crompton/Khaitan

Supply and fix Ceiling fan of size 1200 MM Having (BEE 5 Star rating ) sweep complete and connecting up including provision of with copper standard conductors cables from ceiling rose/ connector to Fan . Make Bajaj /Havells/CG complete all as specified and directed.

Material and labour for endura linear Neo surface and wall mounted LED batten, 20 W LED tube (4 ft) having minimum 2000 lumens with epoxy coated white extruded aluminium channel housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver, high efficiency long life LED chips with lumen efficacy of 125 lumen/wall with a viewing angle of 120 degree to ensure better lumen output, milky white special polycarbonate diffuser for glare free efficient light distribution, elegantly designed white coloured ABS end caps, internal electronic (SMPS based constant current supply) with output short circuit protection, surge protection as per IS : 15885 Part-2 (sec 13), voltage range 140-270V, colour temperature of 5700>100 lm/W system luminous efficacy and power factor> 0.95 and incl 20 W LED tube complete with all accessories. Make : Havells Model No LHCDEFXD5L8R020 and LHFXCEPITNNW020 or eqvilent in Bajaj/CG.

Supply and fixing MCB 40 Amps 230 volts 50 Hz SPN 15 KA with fixed thermal magnetic releasing system incl making connection with existing cable with connection materials like copper strips lugs nuts bolts with sheet metal enclosure suitable for one single MCB compelte all as specified as directed. make - Schneider/ equivalent in siemens Havells cat part No ABB DHMGCSMF040

Supply and fixing MCB SP 240 V, 50 Hz, 10 KA, B curve of rating (0.5-6 Amps) make : Scheinder cat part No - A9N1P06B/Scheinder/ABB.

Supply and fixing MCB SP 240 V, 50 Hz, 10 KA, B curve of rating (32 Amps) make : Havells cat part No DHMGCNF006032F/Scheinder/ABB.

Sch 'A' Part-IX(Site Clearance ) for works covered under Sch 'A' Part-II to VIII) carried forward from pre-priced Schedule.

M/S VALLEY ENTERPRISES CONSTRUCTION CO