Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | H7₹39.5 L−₹11.0 L (21.6%)Accepted-AOC ANURAGPUR PO PANAGARH BAZAR DIST BURDWAN WEST BENGAL 713 148 | PANAGARH BAZAR | BURDWAN | WEST BENGAL | 713148 | H7 | Accepted-AOC Contract awarded to M/s Unique Enterprises | |
| 2 | H1₹50.7 LRejected-Finance | H1 | Rejected-Finance Higher rate quoted than H7 | |
| 3 | H2₹48.4 L−₹2.4 L (4.66%)Rejected-Finance VILL PO KOTA VIA PANAGARH BAZAR DIST BURDWAN WB PIN 713148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | H2 | Rejected-Finance Higher rate quoted than H7 | |
| 4 | H3₹47.6 L−₹3.1 L (6.12%)Rejected-Finance | H3 | Rejected-Finance Higher rate quoted than H7 | |
| 5 | H4₹47.1 L−₹3.6 L (7.13%)Rejected-Finance | H4 | Rejected-Finance Higher rate quoted than H7 |
| Sl No | Description | Qty | Unit | M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd H6 | BISWAS ENTERPRISE H5 | Jaibalaji Enterprise H4 | S S ENTERPRISE H3 | NATIONAL CONSTRUCTION CO H2 | INDIAN CONSTRUCTION H1 | UNIQUE ENTERPRISE H7 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00WOODEN/STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following wooden/steel/TP furniture without disturbing the other parts, making the frame to its original position by tightening, welding as applicable etc and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:- | ||||||||||
| 1.10FD-229 chair Easy | ||||||||||
| 1.11 | Front Legs made out of 1st class HW well seasoned (Teak) | 85 | Each | 65 ₹5,525 | 75 ₹6,375 | 88 ₹7,480 | 75 ₹6,375 | 100 ₹8,500 | 125 ₹10,625 | 50 ₹4,250 Lowest |
| 1.12 | Front rail of seat frame (Hole should be 12.5mm apart of each other), made out of 1st class HW well seasoned (Teak) | 49 | Each | 68 ₹3,332 | 75 ₹3,675 | 88 ₹4,312 | 75 ₹3,675 | 100 ₹4,900 | 125 ₹6,125 | 50 ₹2,450 Lowest |
| 1.13 | Side Rail, made out of 1st class HW well seasoned (Teak) | 40 | Each | 70 ₹2,800 | 75 ₹3,000 | 88 ₹3,520 | 75 ₹3,000 | 100 ₹4,000 | 130 ₹5,200 | 50 ₹2,000 Lowest |
| 1.14 | Back Rail, made out of 1st class HW well seasoned (Teak) | 38 | Each | 85 ₹3,230 | 75 ₹2,850 | 90 ₹3,420 | 75 ₹2,850 | 100 ₹3,800 | 150 ₹5,700 | 50 ₹1,900 Lowest |
| 1.15 | Arm Rest, made out of 1st class HW well seasoned (Teak) | 40 | Each | 80 ₹3,200 | 75 ₹3,000 | 90 ₹3,600 | 75 ₹3,000 | 100 ₹4,000 | 150 ₹6,000 | 50 ₹2,000 Lowest |
| 1.16 | Supply and weaving with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approved by GE | 110 | Each | 930 ₹1,02,300 | 934 ₹1,02,740 | 950 ₹1,04,500 | 1,050 ₹1,15,500 | 980 ₹1,07,800 | 1,000 ₹1,10,000 | 900 ₹99,000 Lowest |
| 1.17 | PVC Shoes | 110 | Each | 60 ₹6,600 | 28 ₹3,080 Lowest | 30 ₹3,300 | 75 ₹8,250 | 30 ₹3,300 | 35 ₹3,850 | 50 ₹5,500 |
| 1.20FD/MAP/II/05 Chair Dinning | ||||||||||
Tender Value
₹44.9 L
EMD Value
₹90,000
Closing Date
6 Nov 2025, 6:00 pmClosed
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DISTT- BURDWAN, STATE-WEST BENGAL PIN-713420
All as per BOQ
2025_MES_735446_1
8500-426/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
As per tender documents
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹90,000
8 Dec 2025
16 Oct 2025
7 Nov 2025
16 Oct 2025
6 Nov 2025
30 Oct 2025
Amount
WOODEN/STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following wooden/steel/TP furniture without disturbing the other parts, making the frame to its original position by tightening, welding as applicable etc and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:-
FD-229 chair Easy
Front Legs made out of 1st class HW well seasoned (Teak)
Front rail of seat frame (Hole should be 12.5mm apart of each other), made out of 1st class HW well seasoned (Teak)
Side Rail, made out of 1st class HW well seasoned (Teak)
Back Rail, made out of 1st class HW well seasoned (Teak)
Arm Rest, made out of 1st class HW well seasoned (Teak)
Supply and weaving with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approved by GE
PVC Shoes
FD/MAP/II/05 Chair Dinning
PVC seat 4mm existing size in its original position all as shown on drg and as directed by Engr-in-Charge.
Front Legs, made out of 1st class HW well seasoned (Teak)
Rear Legs, made out of 1st class HW well seasoned (Teak)
Front rail of seat frame, made out of 1st class HW well seasoned (Teak)
Side Rail, made out of 1st class HW well seasoned (Teak)
Back Rail, made out of 1st class HW well seasoned (Teak)
Short stiffener, made out of 1st class HW well seasoned (Teak)
Back rest batten, made out of 1st class HW well seasoned (Teak)
FD-280 Chair Writting
Front Legs, made out of 1st class HW well seasoned (Teak)
Rear Legs, made out of 1st class HW well seasoned (Teak)
Front rail of seat frame (Hole should be 12.5mm apart of each other), made out of 1st class HW well seasoned (Teak)
Side Rail, made out of 1st class HW well seasoned (Teak)
Long Stiffener, made out of 1st class HW well seasoned (Teak)
Back rest batten, made out of 1st class HW well seasoned (Teak)
Arm rest, made out of 1st class HW well seasoned (Teak)
Supply and weaving with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approved by GE
TP Chair Revolving
Back frame with Dimensions as shown on drngs. Back shall be of 18/19mm thick hot presed ply wood upholstered with fabric/ latherite cover and moulded polyurethane foam. The back frame shall be designed with contour lumber supports for extra conform with PVC lapping all arounds complete all as specified and directed.
Seat frame of size 510x470x60. seat shall be of 18/19mm thick hot presed ply wood upholstered with fabric/ latherite cover and moulded polyurethane foam complete all as specified and directed.
Hand Rest with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant complete all as specified and directed
Pedestal assy injection moulded in black 30% glass filled nylon. A 10.5mm dia forged bright sinc plated MS castor pin is of press fitted into each prong for holding the castor. It is 600mm pitch centre dia complete all as specified and directed.
Hydraulic of existing size all as shown on drg and directed by Engr-in-Charge.
All as Para (e) above but for tilt locking machanism assy.
(g) Removing the existing unserviceable/broken wheel from chair Revolving and supply & fixing the new wheel existing size in its original position all as shown on drg and directed by Engr-in-Charge.
FD/E6/MAP/12 Chair Writing Steel
Seat made out of 12mm thick hot pressed plywood Upholstered with febric and moulded polyurethene foam with PVC lipping all round. (The polyurethene foam shall be 50mm thick and shall be moulded with density 50-55 kg per cubic meter thick and hardness 20 kg on humpden machine)
Back made out of 12mm thick hot pressed plywood Upholstered with febric and moulded polyurethene foam with PVC lipping all round. (The polyurethene foam shall be 50mm thick and shall be moulded with density 50-55 kg per cubic meter thick and hardness 20 kg on humpden machine)
Hand rest made of black integral skin polyurethene with 75-85 shore 'A' Hardness & Reinforced with MS insrest. It shall be scratch and wheather Resistant Size 210mm (Inner) and 230mm (Outer)
FD-279 Chair Dinning
Front Legs, made out of 1st class HW well seasoned (Teak)
Rear Legs, made out of 1st class HW well seasoned (Teak)
Front rail of seat frame (Hole should be 12.5mm apart of each other), made out of 1st class HW well seasoned (Teak)
Side Rail, made out of 1st class HW well seasoned (Teak)
Short Rail, made out of 1st class HW well seasoned (Teak)
Short stiffener, made out of 1st class HW well seasoned (Teak)
Back rest batten, made out of 1st class HW well seasoned (Teak)
Supply and weaving with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane make Ajay /premier as approved by GE
PVC Shoes
FD/E6/MAP/08(R) Bed Hard MAP
Pre laminated particle board from the head board frame (Size of Board : 610mm x 330mm)
Pre laminated particle board from the foot board frame (Size of Board : 610mm x 220mm )
Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.
PVC Shoes
TP Double Sleeping bunk with plywood 1800 x 900
Ply wood top 12mm thick (2 nos ply wood for 1 no double sleeping bunk) commercial, BWR Grade of existing shape & size and as directed by Engr-in-Charge.
Ladder made out of MS Pipe 20 mm dia of existing shape & size as directed by Engr-in-Charge.
FD-1029 Locker Steel/ Locker Bed Side
Top made out of MS sheet 1.00 mm thick of existing size & shape
Bottom made out of MS sheet 1.00 mm thick of existing size & shape
Door shutter of existing size 1 mm thick . All as directed by Engineer-in-Charge and shown on drawing
Hasp & staples of size 150 mm long chromium plated to the shutters of locker steel.
Handle of size 100 mm long 'D' Type chromium plated to the shutters of locker steel.
Hanging rod made out of 20mm dia chromium plated pipe 500mm long of locker steel.
Leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.
FD-277 Peg Table
Leg made out of 1st class teak Wood seasoned of size 30x50x362mm high
Top rail made out of 1st class hardwood teak of size 20mm x 40mm x380mm
Top made out of 18mm pre laminated particle board one side laminated exterior grade with 4mm teak wood beading all around
PVC shoes
FD-97(M)/1023 Shoe Rack (Shelter) / Tray steel 3/4 spaces
Leg made out from angle iron 25x25x5mm of length 750mm
Shelf of existing size and shape made out of MS sheet 1.00mm thick
FD-1031 Almirah Steel Large W/Sh
Top of existing size and shape made out of MS sheet 1.00mm thick
Bottom of existing size and shape made out of MS sheet 1.00mm thick
Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing
Handle chromium plated heavy duty
Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate
3 way locking device
Leg made out of MS sheet 1.00mm thick
Shelf of existing size and shape made out of MS sheet 1.00mm thick
FD-220 Charpoy GI Pipe with ply top
Ply wood top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.
6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe all as specified and shown on drawings (Each check nut will be measured as single unit)
32 mm dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each GI Elbow shall be measured as single unit)
Long rail of GI tubing 32mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in- Charge. (Make: TATA/JINDAL).
Making short rails obtained from item No 5.04 above and fixing all as shown on drawing.
Making legs out of unserviceable long/short rails obtained from item 5.04 and 5.05 above including cutting, threading and fixing all as specified and directed by Engr-in-Charge.
FD-1032 Almirah Steel medium W/Sh
Top of existing size and shape made out of MS sheet 1.00mm thick
Bottom of existing size and shape made out of MS sheet 1.00mm thick
Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing
Handle chromium plated heavy duty
Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate
3 way locking device
Leg made out of MS sheet 1.00mm thick
Shelf of existing size and shape made out of MS sheet 1.00mm thick
Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY/BLACK OR AS APPROVED by GE paint both inside and outside (outside only in case of round/square pipe/tube) by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture/TP furniture :- (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE
FD/E6/MAP/12 Chair Writing Steel
FD/E6/MAP/08(R) Bed Hard MAP
TP Double Sleeping bunk with plywood 1800 x 900
FD-1029 Locker Steel/ Locker Bed Side
FD-97(M)/1023 Shoe Rack (Shelter) / Tray steel 3/4 spaces
FD-1031 Almirah Steel Large W/Sh
FD-1032 Almirah Steel Medium W/Sh
Material and Labour for Complete removal of total existing painting/polish and applying two coats of high gloss polyurethane enamel paint (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss)by spray painting method over and including a coat of pink primer and prepration of surfaces Complete all as specified and as directed for the following furnitures :-
FD-229 chair Easy
FD/MAP/II/05 Chair Dinning
FD-280 Chair Dinning
FD-179 Chair Dinning
FD-277 Peg Table
NATIONAL CONSTRUCTION CO (BID ID -3468726)
S S ENTERPRISE (BID ID -3468682)
Jaibalaji Enterprise (BID ID -3468599)
BISWAS ENTERPRISE (BID ID -3468566)
M/s Baba kshatrapal Labour Contract And Construction Co-Operative Society Ltd (BID ID -3468534)
UNIQUE ENTERPRISE (BID ID -3468891)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
PS426.pdf
Tender Documents • 0.79 MB
BOQ_823538.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .