swagat dvar nirman work at near shamsabad feeling station

12 m-16 m Span over Head Structure with 300 dia M S - two vertical post Supply, fixing & erection ot built up Overhead Structure of 12M-'15M span compiising o, two verlical posts of 6.00 M height made up of 300 mm NB heavy claas NIS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class l\,4.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at botlom for flxing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes const.uclion of RCC Foundaiion of size 0.90x 0.90x1.50 m of required depth as per site condition for bujlt up structure including Earth work in excavation 100 mm thick Lean Concrete in '1:3:6 (cement coaEe sand and 40 mm gauge stone ballasl and RCC lvl-25 cemenl concrete including supply and llxing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering The lateral vetical clearances and complete. lnstallation work shall be as per relevant clauses of MORT&H specillcation section 8OO and IRC 67 2012 complete ln all respect The Rates shall include cost of design, fabrication, supply, transportations, Local shifling Erection of Signage structure using crane. inclusive of all taxes etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in charge.PWD SOR C.H. 28 itom no 07

Retro"Reflectivesheeting type-lv with 4 mm thick ACIvI Single Side Providing & llxing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High tntensity prismatic sheeting type lV as per IRC-67:20'12 retro reflective sheeting with back f.ame NIS angle of 35x35x5 mm. Legends ,letters , numerals and borders etc should be as per MoRTH specification No-80'1.3.7 .The sheeting shall have a pressure - sensitive adhesive of the aggressive - tack type requiring no heat , solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACIVI (Aluminium Composite Materials) shall be lixed on the Back frame MS Angle wilh riveting. [.4lcro prismatic type lV Retro reflective sheeting confiming to ASTM 04956-09 shall be Pressure fixed The Retro reflective sheeting shall be tested for a certillcate of having the sheeting tested Ior coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from lntemational/Government Laboratory/lnstitute by the manufacturer of the sheeting and in case the certlficate is obtained from international condition. il should also be obtained from lndian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artillcial accelerated weathering requ;rements from a reputed laboratory in lndia can be accepted provisionally. ln such a situation, the Employer/Client, if so desires, could seek for a perFonnance guarantee which would be released after receipt of certilicale meeting the requirement of three years outdoor alhering of ihe sheeting as per IRC 67:2012 & Proof of the same Repoft shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and lncidentals all complete as per direction of the Engineer-in-Charge.PWD SOR C.H. 28 itom no 10

add gst