PROVISION OF INFRASTRUCTURE FOR SETTING UP OF FORWARD OPERATING BASE AT TUTICORIN

Amount

Schedule "A" Part – I to Schedule "A" Part – XIV: NOTE: Schedule "A" Part – I to Part – XIV are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Lumpsum price worked out by the contractor for "BUILDINGS & STRUCTURES", as listed in Schedule "A" Part – I

Lumpsum price worked out by the contractor for "SITE CLEARANCE / AREA DEVELOPMENT/EARTH WORK/EXCAVATION", as listed in Schedule "A" Part – II

Lumpsum price worked out by the contractor for "PILE FOUNDATION", as listed in Schedule "A" Part – III

Lumpsum price worked out by the contractor for "INTERNAL ELECTRIFICATION", as listed in Schedule "A" Part – IV

Lumpsum price worked out by the contractor for "INTERNAL WATER SUPPLY", as listed in Schedule "A" Part – V

Lumpsum price worked out by the contractor for "SEWAGE DISPOSAL", as listed in Schedule "A" Part – VI

Lumpsum price worked out by the contractor for "EXTERNAL WATER SUPPLY", as listed in Schedule "A" Part – VII

Lumpsum price worked out by the contractor for "EXTERNAL ELECTRIFICATION", as listed in Schedule "A" Part – VIII

Lumpsum price worked out by the contractor for "ROADS /PATH/CULVERT", as listed in Schedule "A" Part – IX

Lumpsum price worked out by the contractor for "AREA DRAINAGE", as listed in Schedule "A" Part – X

Lumpsum price worked out by the contractor for "COMPOUND WALL, FENCING AND GATE ", as listed in Schedule "A" Part – XI

Lumpsum price worked out by the contractor for "DG SET", as listed in Schedule "A" Part – XII

Lumpsum price worked out by the contractor for "LIGHTENING PROTECTION", as listed in Schedule "A" Part – XIII

Lumpsum price worked out by the contractor for "ARBORICULTURE ", as listed in Schedule "A" Part – XIV

Schedule "A" Part - XV: [Miscellaneous Items] [Pile Foundation, Internal Electrification, Internal water supply, Sewage Disposal, External Water Supply, External Electrification, Road/Path/ culvert, Compound wall/fencing/gate, DG Set, Lightening protection, Arboriculture, EOT crane and Sea wall]

PILE FOUNDATION

Boring for bored cast in situ piles 500 mm dia in any type of soil/clay/soft rock except hard rock/fractured rock and getting out and disposal of spoil out side MD land using HYDRAULIC RIG complete all as specified and directed.

Boring for bored cast in situ piles 500mm dia in hard rock / fractured rock and getting out and disposal of spoil out side MD land using HYDRAULIC RIG complete all as specified and directed.

Boring for bored cast in situ piles 300 mm dia in any type of soil/clay/soft rock except hard rock/fractured rock and getting out and disposal of spoil out side MD land using HYDRAULIC RIG complete all as specified and directed.

Boring for bored cast in situ piles 300mm dia in hard rock / fractured rock and getting out and disposal of spoil out side MD land using HYDRAULIC RIG complete all as specified and directed.

Chipping out piles up to cut off level including disposal of spoil to out side MD land all as specified and as directed.

Carrying out Initial load [Compression] test on 500mm dia piles, complete all as specified and directed.

Carrying out Initial load [Lateral] test on 500mm dia piles, complete all as specified and directed.

Carrying out Initial load [Compression] test on 300mm dia piles, complete all as specified and directed.

Carrying out Initial load [Lateral] test on 300mm dia piles, complete all as specified and directed.

Carrying out routine load test [Compression] on 500mm dia piles, complete all as specified and directed.

Carrying out routine load test [Lateral] on 500mm dia piles, complete all as specified and directed.

Carrying out routine load test [Compression] on 300mm dia piles, complete all as specified and directed.

Carrying out routine load test [Lateral] on 300mm dia piles, complete all as specified and directed.

Carrying out initial pullout test on 500mm dia piles, complete all as specified and directed.

Carrying out initial pullout test on 300mm dia piles, complete all as specified and directed.

Carrying out low strain integrity test on 500mm dia piles including analysing the results complete all as specified and directed.

Carrying out low strain integrity test on 300mm dia piles including analysing the results complete all as specified and directed.

INTERNAL ELECTRIFICATION

All as per Serial Item No. 32 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per Serial Item No. 32 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per item No.32 here-in-before but controlled by two two Nos way switch complete all as specified and directed.

S&F Wall mounted LED 20 Watts, batten type with 6000K +/- 300K, extruded IP-20, 2000 Lumen fitting suitable for surface and pendant application, 230 Volts with polycarbonate housing and integrated electronic driver connector block etc., complete with all accessories internally prewired and necessary mounting arrrangements on 02 Nos PVC blocks including connecting with 1.0 Sqmm 3 core copper conductor cable upto ceiling rose complete all as specified as directed

S&F LED Mirror light fitting 5700K +/- 300K, surface mounted type 2 feet x 10 Watt LED complete with all accessories internally prewired and including mounting arrrangements on 02 Nos PVC blocks, connecting up with twin/three flexible core copper conductor cable of suitable size upto ceiling rose complete all as specified as directed

S&F LED energy saving surface mounted decorative oval bulk head edge light comprising of high brightness, 10 Watt, 6000 K LEDs complete with all accessories internally prewired and including connecting up with twin/three flexible core copper conductor cable of suitable size upto ceiling rose complete all as specified as directed

S&F Wall mounted light fitting made up of polycarbonate material, retrofit B22 type holder for bulb including all fittings and fixtures complete all as specified as directed.

S&F LED lamp 7 Watts 2 Pin, type B22 3000K, 630 Lumen complete all as specified as directed.

S&F LED square light luminiare fitting surface mounted type 8 W LED of 100lm>w complete with all accessories internally prewired and including connecting up with twin/three flexible core copper conductor cable of suitable size upto ceiling rose complete all as specified as directed.

S&F Surface mounting flat panel 36 Watt of 100lm>w LED fitting 2x2 feet with flat panel, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness LEDs etc complete with all accessories internally prewired and necessary mounting arrangements complete all as specified as directed.

S& F LED High bay lumiare with aluminium die cat housing for efficient thermal heat management and secondary modular lense optics for optimised light distribution to improve operational efficiency, with EMC/EMI complaint potted driver, flicker free illumination 100 Watt 5700 K, IP 65 complete all as specified and as directed.

S& F LED MEDIUM bay lumiare with aluminium die cat housing for efficient thermal heat management and secondary modular lense optics for optimised light distribution to improve operational efficiency, with EMC/EMI complaint potted driver, flicker free illumination 80 Watt, 5700k +/- 355k, IP 65 complete all as specified and as directed.

S& F LED Security light with tube 15 Watts 5700 k, IP65 complete with all accessories internally prewired connecting up with twin/three flexible core copper conductor cable of suitable size including 2 metre GI bracket made up of 25 mm dia GI pipe medium grade or suitable size as per site requirement fixing to wall with clamp, bolt, nut and washers compelte all as specified and as directed.

Supply and fixing of BLDC ceiling fans of 1200 mm sweep heavy duty, AC single phase, 230 Volts 5 star rated ISI marked, with revolution of 350 RPM including down rod of suitable size and connecting with 0.5 Sqmm copper conductor from ceiling rose complete all as specified and as directed.

Supply and fixing exhaust fan, 300mm sweep, mettallic body 900 RPM heavy duty with louvers, AC single phase, 230 volts including connection with 0.5 sqmm copper conductor flexible wire from ceiling rose complete all as specified and as directed.

S & F MCB DB, double door, vertical type TPN, 4 way, sheet steel, phospetised powder painted with 200 Amps rated bus bar, 415 Volts, neutral link, IP : 43 protection, concealed in walls including provision for MCCB FPas I/C and MCBs SP/TP as outgoing circuits filling empty with blanks complete all as specified and as directed.

S & F MCB DB, double door, vertical type TPN, 6 way, sheet steel, phospetised powder painted with 200 Amps rated bus bar, 415 Volts, neutral link, IP : 43 protection, concealed in walls including provision for MCCB FPas I/C and MCBs SP/TP as outgoing circuits filling empty with blanks complete all as specified and as directed.

M & L for sub-main wiring with 6.0 sqmm nominal area two single core PVC insulated unshethed multi-stranded FRLS copper conductor cable including one 6.0 sqmm PVC insulated unshethed multi-stranded copper conductor cable for earth wire drawn through 25 mm dia PVC conduit complete all as specified and as directed. Note :(i) Two run of 6.0 Sqmm + one run of 6.0 Sqmm as a earth wire cable + one run of PVC conduit shall be measured as an one Unit.

S&F MCCB, TP, 100 Amps, 415 Volts, 16 KA, 50Hz, AC with fixed over load and fixed short circuit rating (ICS=ICU 50%) as per IEC 60947-II suitable for fixing on VTPN MCCB DB as incommer complete all as specified and as directed. Make: CAT No.830008 of Indoasian or its equivalent as apprived by GE.

S&F MCCB, TP, 125 Amps, 415 Volts, 16 KA, 50Hz, AC with fixed over load and fixed short circuit rating (ICS=ICU 50%) as per IEC 60947-II suitable for fixing on VTPN MCCB DB as incommer complete all as specified and as directed. Make: CAT No.830009 of Indoasian or its equivalent as apprived by GE.

S & F MCB SPN 25 Amps, 240 Volts, 10 KA, 'C' Curve complete all as specified and as directed.

M & L earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to GI earth lead wire 4.0 mm dia [earth lead] and GI pipe 50 mm, medium grade for earthing lead protection to the extent of maximum 7.5m, earth plate electrode surrounded by 150 mm thick packed layers of charcoal and common salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, charcoal, common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified. Note: GI earth wire upto 7.5 metres shall be deemed to be included in the quoted lumpsum and beyond 7.5 metre shall be measured and paid separately under relavent item.

S& F Security search light, 230 Volts, 400 Watt MH Lamp with high intesity long range upto 800 metres, weather and dust proof with highly polished stainless steel reflector, toughned glass with rotating arrangement including control gear made out of aluminium housing and connection with suitable size multistranded copper cable including suitable size bracket for fixing lamp as per site requirement complete all as specified and as directed.

INTERNAL WATER SUPPLY

Supply and fix Two way bib tap brass, fancy type, chromium plated, long body screwed down high pressure, both ends screwed and fixed for pipes of size 15 mm dia complete all as specified and as directed.

Supply and fix health faucet 15 mm size, fancy type, chromium plated, screwed down high pressure, both ends screwed and fixed for pipes complete all as specified and as directed.

Supply and fix over head shower rose with arm complete all as specified and as directed.

Supply and fix angle valve 15 mm size, fancy type, chromium plated, screwed down high pressure, both ends screwed and fixed for pipes complete all as specified and as directed.

SEWAGE DISPOSAL

M & L for 150 mm dia double wall corrugated HDPE pipe [DWC HDPE], laid in trenches and jointed in cement mortar including testing complete all as specified and directed.

M & L for 200 mm dia double wall corrugated HDPE pipe [DWC HDPE], laid in trenches and jointed in cement mortar including testing complete all as specified and directed.

M & L for precast reinforced cement concrete M30 (Using 20mm graded granite stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

EXTERNAL WATER SUPPLY

M & L for 150 mm dia ductile iron pipe spigot and socket type centrifugally cast (spun) all as per IS:8329-2000, class K9 with flexible rubber gasket push on type joint having cement mortar lining with portland slag cement as per IS 455 : 1989 bituminous coating as per Annex 'C' of IS 8329, including provision of specials, such as tee's, elbows, bends, reducers, taper pieces complete all as specified and directed.

M & L for 100 mm dia ductile iron pipe spigot and socket type centrifugally cast (spun) all as per IS:8329-2000, class K9 with flexible rubber gasket push on type joint having cement mortar lining with portland slag cement as per IS 455 : 1989 bituminous coating as per Annex 'C' of IS 8329, including provision of specials, such as tee's, elbows, bends, reducers, taper pieces complete all as specified and directed.

M & L for masonry valve chamber of size 1200 X 1200 X 1000 mm [interanl dimensions] comprising of 50mm thick PCC for valve including excavation and earth work in any type of soil and 200 mm thick PCC 1:4:8 type D2 foundation, PCC 1:3:6 type C1 solid block wall 20 cm thick in CM (1:4), plastering internal surface 15 mm tick in CM (1:4) PCC (1:3:6) type B1 couping 50 x50x6 mm angle iron 3 mm thick MS plate cover complete with locking arrangement painting steel and iron surface with two coat of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

Supply, fixing, installation and comissioning of Pumping set centrifugal type, electric driven, 7.5 HP, 5.5 KW, head 21-30 metres, 1000 LPM at 21 metre head, including suitable size foundataion including all fixing arrangements complete all as specified and directed.

M&L for LT panel board made out of powder coated CRCA sheet 2.00 mm thick indoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear including nuts/ bolts etc., to be made of rust proof material including tinned copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V 100 Amps capacity busbar confirming to IS 8623 complete with necessary internal electric connection as required, provision and including the following.

M & L earthing complete with copper earth plate electrode 600 X 600 X 3 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 20 x 3.00 mm copper strip [Earth Lead] and GI pipe 40 mm, medium grade for earthing lead protection to the extent of maximum 7.5m, earth plate electrode surrounded by 150mm thick packed layers of charcoal and common salt filled in alternate layers, connected to the Plate by means of GI bolts & nuts complete all as per electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, charcoal, common salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm angle Iron, MS funnel with 20 mm bore, medium grade GI watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified. Note: Copper earth strip upto 7.5 metres shall be deemed to be included in the quoted lumpsum and beyond 7.5 metre shall be measured and paid separately under relavent item.

Supply and fix water meter premium quality of size 100 mm dia flanged type with all fixing arrangements complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY

Supply, installation, testing and commisioning of copper wound transformer step down, 160 KVA outdoor Onan type class 'A' insulation complete with standard fittings of tranformer, HT 22 KV, 3 Phase, 50 Hz , LT 0.433 volts, 4 wire with off load tappings on HT side to vary secondary voltage within limit, 2 sec short circuit thermal with stand time 4.5% impedence at 75 degree with stand time, porcelain type bushing Voltage rating 25KV, confirming to IS 1180 as amended upto date with efficiency level 2 Conventional Type of Transformer Tank including suitable size stone masonary foundation and HV and LV cable end box complete all as specified as per manufacturer layout and as directed.

Supply, installation, testing and commisioning of copper wound transformer step down, 315 KVA outdoor Onan type class A insulation complete with standard fittings of tranformer, HT 22 KV, 3 Phase, 50 Hz , LT 0.433 volts, 4 wire with off load tappings on HT side to vary secondary voltage within limit, 2 sec short circuit thermal with stand time 4.5% impedence at 75 degree with stand time, total losses @ 50% load at rated voltage , porcelain type bushing Voltage Rating 17.5 KV Current Rating 250 Amps, confirming to IS 1180 as amended upto date with efficiency level 2 Conventional Type of Transformer Tank including suitable size stone masonary foundation and HV and LV cable end box complete all as specified as per manufacturer layout and as directed.

Supply, installation, testing and commisioning of Outdoor Type RMUs, One incoming and two outgoings, 22KV, 630 Amps, 20 KA, both side extensible motor operated, Load break switch 01 Nos as Incomer , 02 Nos Load break switch as out going and Operation voltage, 22 KV Rated lightning , withstand voltage 75 KV, including suitable size PCC foundation for errection of RMU as per manufacturer layout complete all as specified and directed.

Supply, lay and test UG cable, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 22000 Volts grade with stranded aluminium conductor 3 Core 240 Sqmm size complete all as specified and as directed.

S&F for Cable jointing kit for 22 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 sqmm complete all as specified and as directed.

S&F for Cable jointing kit for 22 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 sqmm complete all as specified and as directed.

S&F for Cable jointing kit for 22 KV (Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 sqmm complete all as specified and as directed.

S & F Street light fitting 35/36 Watt LED made of pressure die cast housing along with prismatic polycarbonate modular secondary lens optics with IP 66 protection including connection from connector complete all as specified and directed.

S & F LED Flood light fitting luminaire outdoor type with single die ceramic base high power LED, PDC housing & integrated flood optics to ensure uniform distribution maintenace free system for sports lighting of capacity 18500 Lumens of minimum 130 lumen per Watt, 230 Volts, 50 Hz, IP66 including connection from connector complete all as specified and directed.

S & F for circuit wiring of street light from junction box to fitting with Sheathed copper cable 1.5 Sqmm, 2 Core, flat complete all as specified and directed

Supply and Fix junction boxes IP 66 protected made out of poly carbonate material for out door installations of size 155X210X92mm with 50 Amps Aluminium Busbar 4 Pole including incoming, outgoing cable connection arrangements with colour code insulation sleeves complete all as specified and directed.

Supply and Fix GI bracket ofsize 32 mm dia GI pipe light grade, 1.2 mtr long, 30 degree bent to shape and fixed with 40 x 6 mm flat iron clamp-02 Nos with suitable size of nuts and bolts etc on poles complete all as specified and directed.

M&L for LT panel board made out of powder coated CRCA sheet 3.15 mm thick outdoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear including nuts/ bolts etc., to be made of rust proof material including tinned copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V of suitable capacity busbar confirming to IS 8623 complete with necessary internal electric connection as required, provision and including the following.

M&L for LT panel board made out of powder coated CRCA sheet 3.15 mm thick outdoor Pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of Switcher gear about termination of switch gear including nuts/ bolts etc., to be made of rust proof material including tinned copper bus bar with insulators suitable for three phase and four wire LT AC, 50 Hz 415 V of suitable capacity busbar confirming to IS 8623 complete with necessary internal electric connection as required, provision and including the following.

[a] MCCB AC 3 Phase 415 V, 50Hz, microprocessor release TPN, 4 pole 200 Amps capactiy 25KA (ICS=ICU 100%) with adjustable type thermal and magnetic setting release - 01 No. Make: CAT No. CM90634OOPO of L&T or its equivalent as approved by GE. [b] MCCB AC 3 Phase 415 V, 50Hz, microprocessor release TPN, 4 Pole, 125 Amps capactiy 25KA (ICS=ICU 100%) with adjustable type thermal and magnetic setting release - 01 No Make: CAT No. CM90634OOMO of L&T or its equivalent as approved by GE. [c] MCCB AC 3 Phase 415 V, 50Hz, microprocessor release TPN, 4 Pole, 63 Amps capactiy 25KA (ICS=ICU 100%) with adjustable type thermal and magnetic setting release - 01 No Make: CAT No. CM91712OOHOG of L&T or its equivalent as approved by GE. [d] MCCB AC 3 Phase 415 V, 50Hz, microprocessor release TPN, 4 Pole, 40 Amps capactiy 18KA (ICS=ICU 100%) with adjustable type thermal and magnetic setting release - 02 Nos Make: CAT No. CM90518OOGO of L&T or its equivalent as approved by GE. [e] MCCB AC 3 Phase 415 V, 50Hz, microprocessor release TPN, 4 Pole, 25 Amps capactiy 18KA (ICS=ICU 100%) with adjustable type thermal and magnetic setting release - 02 Nos Make: CAT No. CM90518OODO of L&T or its equivalent as approved by GE. [f] Onload changeover switch 125 Ams, 4 Pole - 01 No Make: CAT No. CO11250OOOO of L&T or its equivalent as approved by GE. [g] Indicating lamp for On/OFF/Trip and phase indication with control fuse/MCB - 07 sets [Set of 03]

Supply and install 100 KVAR APFC panel with Automatic Power Factor correction (APFC) cubical indoor floor mounted type, dust and vermin proof free standing made out of powder coated CRCA sheet 3.15 mm thick, CPRI approved, suitable for 3 Phase, 4 wire, 415 Volts & 50 Hz system of capacity 100 KVAR system in 11 steps [5 KVARX 2 Steps, 10 KVAR x 9 steps] with angle iron support frame made out of 50x50x6 mm and fixed over suitable PCC foundation complete all as specified and as directed and comprising the following 1. MCCB 3 Pole, 36 KA, 250 Amps Capacity 2. Aluminium bus bas 40x10 mm [R,Y,B], Earth 50x6mm [E] 3. MCBs 3P, 16 Amps, 10 KA 'C' curve - 02 Nos 3. MCBs 3P, 32 Amps, 10 KA 'C' curve - 09 Nos Instruments:- [a] RYB LED Indication lamp with control MCB - 1 Set [b] Voltmeter 0-500 Volts [c] 250/5 Amps tab insulated CT coil Class 1.0, 10 VA - 03 Nos [d] Ammeter Notes: (1) Incoming MCCB shall be measured and paid seperately. (2) Prior approval is required with technical data sheet before procurement.

Supply and fixing Moulded Case Circuit Breakers in APFC panel including connecting the incoming and out going cables by using suitable cable glands and jumpers/cable with bus bar of capacity 320 Amps, 4 Pole, 36 KA with suitable nut bolts complete as specified and directed.

Supply and fix HT 22 KV out door type gang operated air-break switch suitable for vertical mounting upto 200 Amps complete all as specified and directed.

Supply and fix HT 22 KV out door type Drop out fuse double stack channel type complete all as specified and directed.

Supply and fix lightning arrestor HT 22/30 KV, 10 KA complete all as specified and directed.

Supply and fix HT 22 KV post insulator made of porcelain/ polymer complete all as specified and directed.

M & L for boring holes under road, pavement, hard standing by trenchless with horizontal directional drilling using using ultra sound technique using necessary machine including 150 mm dia HDPE pipe suitable for 0.4 mpa working pressure complete all as specified and directed.

ROAD/PATH/CULVERT

M & L for 250 mm compacted thick WMM in two layers (each layer shall be rolled separately) with broken boulders or quarry stone or shingle or gravel as per MORTH specification, interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 15 tonne roller complete all as specified and directed.

S&F Stainless steel name sign boards made out of wide angle cube corner micro prismatic grade sheeting TYPE XI retro reflective and fixed over 2mm thick aluminium sheet and back support frame of 25 x 25 x 3 mm angle frame supported by 380D stainless steel pipe and 760D pipe stainless steel vertical post grade SS304 of size 1200 x 900mm (2 Nos vertical post height of 2.00 mtrs above GL) including letters writing as directed including excavation and fixing standing poles in concrete complete all as specified and directed.

S&F Stainless steel name sign boards made out of wide angle cube corner micro prismatic grade sheeting TYPE XI retro reflective and fixed over 2mm thick aluminium sheet and back support frame of 25 x 25 x 3 mm angle frame supported by 380D stainless steel pipe and 760D pipe stainless steel vertical post grade SS304 of size 900 x 600mm (2 Nos vertical post height of 2.00 mtrs above GL) including letters writing as directed including excavation and fixing standing poles in concrete complete all as specified and directed.

S&F Stainless steel name sign boards made out of wide angle cube corner micro prismatic grade sheeting TYPE XI retro reflective and fixed over 2mm thick aluminium sheet and back support frame of 25 x 25 x 3 mm angle frame supported by 380D stainless steel pipe and 760D pipe stainless steel vertical post grade SS304 of size 450 x 450mm (2 Nos vertical post height of 2.00 mtrs above GL) including letters writing as directed including excavation and fixing standing poles in concrete complete all as specified and directed.

M&L for 2.5 mm thick road marking strips [reflective] of specified shade / colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-incharge and accordance with applicable specifications.

S&F dual directional reflective road stud, aluminium alloy die casted, dynamically designed, very high impact strength fitted with 2 Nos of highly reflectors of size 100 x 100 x 20 mm complete all as specified and directed

S&F stainless steel round pipe delineator with reflective tape of model OS -803, fixing in PCC 1:2:4 type B1 of size 300×300×450mm including excavation/ earthwork, returning filling and removal of surplus soil complete all as specified and directed

S & F convex mirrors for road safety as per Model No.OS-791, 100 cms dia made up of polycarbonate reflective mirror, body made of ABS suitable for outdoor use complete fixed with SS pipe of 60.30mm outer dia, SS 304 graded, length 2.4 metre over all length embaded in PCC 1:2:4 type B1 including all necessary excavation and earthwork work complete all as specified and directed

COMPOUND WALL, FENCING AND GATE

S&F Punched tape concertina coil of dia 900mm with the following specifications:- stretched length for roll 9 to 10 metres , No of turns per roll 50, Core wire dia meter 2.4mm, blade thickness 0.45mm, blade length 10-20mm, blade width 13-21mm and blade spacing 12-37mm fixed in position and secured to both sides of shaped angle iron post with 2.24 mm GI wire (Concertina Coil 900mm dia weighing 8 Kg (+ or - 5%) per coil stretchable to 9 to 10mtr length) complete all as specified and as directed.

DG SET

Supply installation, commissioning and testing of factory made out door LT distribution panel board cubical type floor mounted CPRI approved fabricated out door type made out of 3.15 mm thick CRCA sheet and angle iron 50mm x 50mm x 6mm frame complete with suitable size Aluminium bus bar for 3 phase 4 wire system mounted on procelain insulator suitabully spaced in totally enclosed chamber and wired with suitable size PVC insulated multistranded copper cable complete including powder coated painting both internally and externally with two coats of synthetic enamel grey paint over a coat of red oixide primer comprising of the following:-

(B) Diesel Engine: - Adequate capacity Diesel engine suitable for 35 KVA coupled drive independently with alternator and after considering derating as per site conditons after generating and reducing power consumed by accessories, directly coupled through flexible type coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant ISO - 8528 with with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under:- (i) Fly wheel with housing (ii) Cooling system :- Mounted radiator with fan & belts. (iii) Cooling Water pump: - Centrifugal type belt driven. (iv) Electrical starter motor 12 V DC. (v) Battery charging alternator (vi) Mechanical Governer (vii) Spin on Fuel filter (viii) Spin on full flow lube oil filter (ix) Residential Silencer (x) Air cleaner (Paper element type) (xi) Recovery Bottle Safeties for LLOP/HWT (xii) First Fill of lube oil and coolant

(C) Fuel Tank :- Fuel tank of 110 Ltrs and same shall be integrated in the base of Gen Set complete with drain valve, air vent and outlet connection, electronic type capable for 1% speed /frequecy regulation. i) Fuel filters ii) Fuel hoses iii) Lub oil System :- a) Lubricating oil filter b) Lubricating oil pump iv) Air Intake System a) Air intake Manifold b) Air cleaner dry type v) Governer :- Mechanical Governer vi) Starting System :- Electric Self starter with maintenace free batteries lncluding battery charging alternator.

(D) Batteries:- 1 No Maintenance free Batteries of 12 V of suitable capacity complete with copper conductor multistranded leads of suitable length from self starter to the battary terminals complete with initial charge and initial fill of electrolite all as specified. Make:- CUMMINS PULSE/ EXIDE / AMRON (produced by main / original manufacturer) (E) Handling and operation : Salient features of accessories shall be as under: i) Starter gear ring ii) Start and stop push button iii) Ignition key / Switch iv) Radiator with blower fan v) Corrosion inhibitor coolant vi) Paper element filters for fuel, lub oil and by pass. vii) Mechanical governer controlled direct fuel injection system viii) Fly wheel housing and fly wheel.

(F) Generator Monitoring Panel: Comprising of following : (a) Gen set controller connected micro process integrated Generator set monitoring metering, governing, protection and control system with built in torque matched volts/Hz/overload controller with necessary hardware/ software etc. (b) Engine protection for low lub oil pressure, high coolant temperature (alarm & shutdown) (c) Alternator protection parameters like under voltage, over current, under frequency, over frequency ( alarm & shut down) (d) Relay drivers for remote annunciations (e) Cyclic cranking (f) Auto/manual start/ stop (g) Alternator trim adjustment from the front key pad (h) Operates within a temperature range 0- 50°C and humidity upto 95% (j) Remote monitoring capabilty through separate Interface modules (k) Genset metering parameters like lube oil pressure, coolant temperature, engine speed (RPM), run hours, DC voltage, 3 phase volts and 3 phase Ampheres, frequency, KW, KVA, power factor (l) Safety Controls : - Engine low lube oil pressure, high water temparature and over speeding of engine. (m) Coupling arrngement : - Flexible coupling, fly wheel to suit flexiable coupling fly wheel houslnq. (n) Accessories :- AVM Pads built or separtely mounted to manufacturer base frames. (o) Base Frame : - Made out of ISMC 250 of sturdy design made of MS channel with necessary reinforcement and predetermined holes.

(G) CONTROL PANEL:- Genset control panel of 14/16 Gauges CRCA sheet and powder coated for a weather proof long last finish consists of following parts :- i) Standard Engine Instrumentation. ii) PSO 600 control panel which measures:- (a) Individual Phase Current(Amps) (b) Phase Voltage (Volts) (c) Generator output frequency (Hz) (d) Engine water temperature (Deg C) (e) Lube Oil pressure (kPa) (f) Working Hours (iii) MCB 'C' curve of suitable rating (iv) LED indications for main functions (v) Current Transformers (vi) Instrument fuses duly wired and ferruled.

(H) Acoustic enclosure: Enclosure Is free standing floor mounted factory built and modular in construction to facilitate easy assembly at work site and will be drop over housing type. It will consist of acoustically treated panel housed In sheet steel will provide easy access for maintenance, repairs and operation. The enclosure is custom built to suit conditions, with the following features:- i) Custom built product for various equipments, with ensure the optimum performance without duration. ii) Rugged in construction maintenance free and modular designs which facilitate easy at site. iii) CRCA sheets to be used for enclosure panel to ensure longer life against weathering action. High quality acoustic insulation materials to be used as per IS 8183 for maximum sound absorption. Acoustic layers are supported by perforated sheets iv) Sheet metal components of the enclosure should undergo various stages of surface treatment prior to painting which leads to be bette life of the enclosure against weathering action. v) Special paint treatment with pure polyester powder / epoxy to be provided for better weather resistance. vi) Well designed ventilation system to be provided to pump up the heat in the chamber efficiently. vii) For effective acoustic / weather sealing a special type weather sealing gaskets, new frame rubber gaskets to used. viii) Working space is to be provided around the equipment for easy maintenance / repairs.

ix) Necessary cut out provision for entry and exist of fuel lines cable to be incorporated in the enclosure as per the requirement. x) A see through transparent window (glass or acrylic) In front of engine panel to be provided for monitoring the operation. xi) Ducting if required, belows, mechanical hardware like locks, hinges fasteners etc., to be provided. xii) Deliverables. As per manufacturer Design 75 dBA; @ 1 mtr at 75% load under free field conditions.The temp Inside the enclosure will be within as per manufactrurers recommendations above ambient temp. xiii) The enclosure should be provided with LED light fitting for Inside illumination xiv) The battaries should be placed inside the enclosure beside the DG Set on a suitable inlsulated plat form. xv) The DG Set should be provided with external Emergency stop push button. xvi) The accoustic enclosure parts shall be of powder coated after pre treatment process. The powder coating shade should be Genset Green. The base frame should be painted with epoxy based black shade. Make for Accoustic panel : DG Set OEM

(B) Diesel Engine: - Adequate capacity Diesel engine suitable for 20 KVA coupled drive independently with alternator and after considering derating as per site conditons after generating and reducing power consumed by accessories, directly coupled through flexible type coupling multi cylinder multi stroke direct injection, cold starting 1500 RPM, as per relevant ISO - 8528 with with standard accessories all as specified and required for safe handling and operation salient features of accessories shall be as under:- (i) Fly wheel with housing (ii) Cooling system :- Mounted radiator with fan & belts. (iii) Cooling Water pump: - Centrifugal type belt driven. (iv) Electrical starter motor 12 V DC. (v) Battery charging alternator (vi) Mechanical Governer (vii) Spin on Fuel filter (viii) Spin on full flow lube oil filter (ix) Residential Silencer (x) Air cleaner (Paper element type) (xi) Recovery Bottle Safeties for LLOP/HWT (xii) First Fill of lube oil and coolant

(C) Fuel Tank :- Fuel tank of 87 Ltrs and same shall be integrated in the base of Gen Set complete with drain valve, air vent and outlet connection, electronic type capable for 1% speed /frequecy regulation. i) Fuel filters ii) Fuel hoses v) Lub oil System :- i) Lubricating oil filter ii) Lubricating oil pump vi) Air Intake System iv) Air intake Manifold v) Air cleaner dry type vii) Governer :- Mechanical Governer viii) Starting System :- Electric Self starter with maintenace free batteries lncludlng battery charging alternator.

(D) Batteries:- 1 No Maintenance free Batteries of 12 V of suitable capacity complete with copper conductor multistranded leads of suitable length from self starter to the battary terminals complete with initial charge and initial fill of electrolite all as specified. Make:- CUMMINS PULSE/ EXIDE / AMRON (produced by main / original manufacturer) (E) Handling and operation : Salient features of accessories shall be as under: i) Starter gear ring ii) Start and stop push button iii) Ignition key / Switch iv) Radiator with blower fan v) Corrosion inhibitor coolant vi) Paper element filters for fuel, lub oil and by pass. vii) Mechanical governer controlled direct fuel injection system viii) Fly wheel housing and fly wheel.

(F) Generator Monitoring Panel : Comprising the following : (a) Gen set controller connected micro process integrated Generator set monitoring metering, governing, protection and control system with built in torque matched volts/Hz/overload controller with necessary hardware / software etc. (b) Engine protection for low lub oil pressure, high coolant temperature (alarm & shutdown) (c) Alternator protection parameters like under voltage, over current, under frequency, over frequency ( alarm & shut down) (d) Relay drivers for remote annunciations (e) Cyclic cranking (f) Auto/manual start/ stop (g) Alternator trim adjustment from the front key pad (h) Operates within a temperature range 0- 50°C and humidity upto 95% (j) Remote monitoring capabilty through separate Interface modules (k) Genset metering parameters like lube oil pressure, coolant temperature, engine speed(RPM), run hours, DC voltage, 3 phase volts and 3 phase Ampheres, frequency, KW, KVA, power factor (l) Safety Controls : - Engine low lube oil pressure, high water temparature and over speeding of engine. (m) Coupling arrngement : - Flexible coupling, fly wheel to suit flexible coupling fly wheel houslnq. (n) Accessories :- AVM Pads built or separtely mounted to manufacturer base frames. (o) Base Frame : - Made out of ISMC 250 of sturdy design made of MS channel with necessary reinforcement and predetermined holes.

(G) Fuel Tank :- Daily service fuel tank of capacity suitable for continuous 12 hours run made out of 3 mm thick (Heat Retradant) sheet top and bottom with caliberated level indicating arrangement, stop cock, drain plug, fuel pump of suitable capacity and connected pipe line should be Installed with in built tank inside the acoustic enclosure is inclusive of the cost of DG set and is as per manufacture design. (q) Deliverables. Confirms the norms established by CPCB. (H) CONTROL PANEL, AMF PANEL:- Genset control panel of 14/16 Gauges CRCA sheet and powder coated for a weather proof long last finish,comprising the following parts :- i) Standard Engine Instrumentation. ii) PSO 600 control panel which measures:- (a) Individual Phase Current(Amps) (b) Phase Voltage (Volts) (c) Generator output frequency (Hz) (d) Engine water temperature (Deg C) (e) Lube Oil pressure (kPa) (f) Push Button ( Starter) (iii) MCB of suitable rating (iv) LED indications for main functions (v) Current Transformers (vi) Instrument fuses duly wired and ferruled.

(J) Acoustic enclosure: Enclosure is free standing floor mounted factory built and modular in construction to facilitate easy assembly at work site and shall be drop over housing type, it will consist of acoustically treated panel housed In sheet steel will provide easy access for maintenance, repairs and operation. The enclosure is custom built to suit conditions, with the following features:- i) Custom built product for various equipments, with ensure the optimum performance without duration. ii) Rugged in construction maintenance free and modular designs which facilitate easy at site. iii) CRCA sheets to be used for enclosure panel to ensure longer life against weathering action. High quality acoustic insulation materials to be used as per IS: 8183 for maximum sound absorption. Acoustic layers are supported by perforated sheets iv) Sheet metal components of the enclosure should undergo various stages of surface treatment prior to painting which leads to be better life of the enclosure against weathering action. v) Special paint treatment with pure polyester powder / epoxy to be provided for better weather resistance. vi) Well designed ventilation system to be provided to pump up the heat in the chamber efficiently. vii) For effective acoustic / weather sealing a special type weather sealing gaskets, new frame rubber gaskets to used. viii) Working space is to be provided around the equipment for easy maintenance / repairs.

ix) Necessary cut out provision for entry and exist of fuel lines cable to be incorporated in the enclosure as per the requirement. x) A see through transparent window (glass or acrylic) in front of engine panel to provided for monitoring the operation. xi) Ducting if required, belows, mechanical hardware like locks, hinges fasteners etc to be provided. xii) Deliverables. As per manufacturer Design 75 dBA; @ 1 mtr at 75% load under free field conditions.The temp Inside the enclosure shall be within as per manufactrurers recommendations above ambient temp. xiii) The enclosure should be provided with LED light fitting for Inside illumination xiv) The battaries should be placed inside the enclosure beside the DG Set on a suitable inlsulated platform. xv) The DG Set should be provided with external Emergency stop push button. xvi) The accoustic enclosure parts shall be of powder coated after pre treatment process. The powder coating shade should be Genset Green. The base frame should be painted with epoxy based black shade.

M & L for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of Plate not less than 1.50 m below normal ground level connected to 25x4mm thick GI strip [earth lead] and GI pipe 50 mm, medium grade for earthing lead protection to the extent of maximum 7.5m, earth plate electrode surrounded by 150 mm thick packed layers of charcoal and common salt filled in alternate layers, connected to the Plate by means of GI Bolts & Nuts complete all as per electrical plate No. 3 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, charcoal, common salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified. Note: GI earth strip upto 7.5 metres shall be deemed to be included in the quoted lumpsum and beyond 7.5 metre shall be measured and paid separately under relavent item.

ARBORICULTURE

M&L for developing and planting hedges of height 30cm and above, 30-30cm apart saplings, including excavation in trenches in any type of soil to a width 45 cm and depth 45cm and filling the trenches with mixture of vermin compost/farm yard manure and red soil in proportion of 2:3 with necessary pesticides treatment including removing the surplus soil to a distance not exc 50m and depositing where directed and watering the hedges at regular intervals as required till physical completion of the work (Phase-I), complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 30 Cm deep and getting out in any type of soil, removing roots/vegetation from the excavated area, filling the excavated portion with mixture of vermin compost/farm yard manure and fertile red soil in proportion of 2:3 with necessary pesticides treatment including removing the surplus soil to a distance not exc 50m and depositing where directed, complete all as specified and directed.

M&L for developing lawns by providing soft grass (Bermuda grass) by dibbling and planting grass tufts and watering the area/grown grass and mowing the developed lawn at regular intervals as required till physical completion of the work (Phase I), complete all as specified and directed.

Excavation in post holes (or similar holes) Each n exc 0.50 Cum, getting out in any type of soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm including filling the excavated portion with mixture of vermin compost/farm yard manure and fertile red soil in proportion of 2:3 with necessary pesticides treatment including removing the surplus soil to a distance not exc 50m and depositing where directed, complete all as specified and directed.

Planting trees of species [Palm/ Guava/ Mango/ Lemon/ Red Coconut having 1.20 m to 1.50 m height and one year old with proportionate girth in the filled up pits and watering the plants at regular intervals as required till physical completion of the work (Phase I), complete all as specified and directed.

S&F MS Flat iron tree guard, 60 cm dia and 2 metre high above ground, consisting 04 Nos 25x6 mm, 2.25 m long and 8 Nos 25x3mm and 2.0 m long vertical MS flats rivetted to 3 Nos 25x6 mm MS flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts including painting with two coats of synthetic enamel paint over a coat of red oxide primer. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect to the entire satisfaction of Engineer-in-Charge.

Supply of 3/4 inch rubber hose of good quality for watering in garden all as specified and directed by Engineer-in-Charge

Supply only good quality PVC sprinkler system for watering etc complete all as specified and as directed. Make : Divine tree or its equivalent as approved by GE

SEA WALL

Material and labour (loading, Unloading and placing) for Armour layer (Rubble stones) of each stone weight 1.5 Ton to 2 Tons complete all as specified and as directed.

Material and labour (loading, Unloading and placing) for Armour layer (Rubble stones) of each stone weight 1 Ton to 1.5 Tons complete all as specified and as directed.

Material and labour (loading, Unloading and placing) for Core layer (QS) of each stone weight 10 Kgs to 300 Kgs complete all as specified and as directed.

Material and labour (loading, Unloading and placing) for Toe Mound - 1 of each stone weight 500 Kgs to 800 Kgs complete all as specified and as directed.

Material and labour (loading, Unloading and placing) Toe Mound - 2 of each stone weight 300 Kgs to 500 Kgs complete all as specified and as directed.

Material and labour (loading, Unloading and placing) Filter Layer of each stone weight 1 Kg to 10 Kgs complete all as specified and as directed.

Material and labour for 6mm thick Geotextile layer complete all as specified and as directed.

ELECTRONIC OPERATED CRANE

Supply, Fixing, Testing and Commissioning crane electrically operated OH with span upto 12 to 16 mtr and capacity 10 Ton of LT upto 50 mtr indoor type of class 2 lift of 6 metre, speed hoisting 3m/mn, LT -15to 18 m/min speed, CT-8 to 10m/min, as per IS 3177/IS 807, for operation from floor level through independetly moving pendant through Squirrel cage Induction motor with brake, light in weight, aesthetically good and reliable, should cope up with sudden load increase/ decrease/ Voltage variations, longer thermal life, high starting torque with low starting current, suitable for frequent starts/ stops and reversals including 16mm dia wire rope of 4 length, 6x36 construction, steel core, 180 Kg/sqmm breaking strength as per IS 2266, with full length platform in C-Rail type arrangementsystem with standard 'C' type hook as per IS 3815/ IS 15560, roller type hoist limit switch at both end, control panel placing on platform including all necessary switch gear to satisfactorly operation of hoist of control voltage 110 V, with supply 3 phase 415V, with 100% load test and over load test complete all as directed. (i) Wire rope - Usha Martin (ii) Control Panel - BCH/ Schneider (iii) Motors - Stallion/ Neptune (iv) Flexible cable - Rubicon/ BCH (v) VVFD drive - Schneider (vi) any other items as per OEM recommendation.

M & L for sub-main wiring with 10.0 sqmm nominal area four single core PVC insulated unshethed multi-stranded FRLS copper conductor cable including two 10.0 sqmm PVC insulated unshethed multi-stranded copper conductor cable for earth wire drawn through suitable dia PVC conduit complete all as specified and as directed. Note :(i) Four run of 10.0 Sqmm + Two run of 10.0 Sqmm as a earth wire cable + one run of PVC conduit shall be measured as an one Unit.

S & F sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 Volts double door with magnetic locking system complete all as specified and directed.

S & F MCB FP, 415 Volts suitable for fixing in MCB DB of capacity 40/60 Amps, 10 KA, AC, 50Hz, 'C' Curve complete all as specified and directed. Make: Cat No BB40400/500/630C of L&T or its equivalent in Legrand/Schneider as approved by GE.

Removal of excavated surplus soil outside MD land complete all as specified and directed.

PHASE-II

Maintenance of newly developed trees/lawn/hedges including the following: - a) Periodical deweeding of unwanted vegetation growth around the plants/lawn area. b) Watering all the plants/lawn area as required for proper growth c) Periodical lawn mowing d) Periodical prunning the hedges e) Treating the plants and soil with required manure, pesticides and fertilizers etc including necessary topping of red soil. Note: It will be responsibility of the contractor to protect the plants, hedges and grass and keep those alive and growing for at least one year from the date of commencement of the work against phase II. If any plants, hedge or grass in any particular area is found dried/damaged, it will be responsibility of the contractor to replant the same without any extra cost to the Govt.

Som Projects Pvt. Ltd.

G R M CONSTRUCTIONS

P Natesan and Co

SUNDER BUILDERS

Jatan Constructions Private Limited

M/S RAJBUILDERS

SHAIJAL T M

CREATIVE BUILDERS