Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹38.0 L+₹2.1 L (5.76%)Rejected-Finance 53 SHANTI S SANIK COLONY BAIRAGARH BHOPAL MP 462 030 | BHOPAL | BHOPAL | MADHYA PRADESH | 462030 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹38.4 L+₹2.5 L (6.86%)Rejected-Finance 93 4 16A BLOCK NO 3 JAWAHAR CHOWK PACHMARHI MP 461881 | PACHMARHI | HOSHANGABAD | MADHYA PRADESH | 461881 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹39.1 L+₹3.2 L (8.90%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹67.3 L+₹31.4 L (87.4%)Rejected-Finance 2284 30 BAJRANG NAGAR VFJ ESTATE JABALPUR 482009 | JABALPUR | MADHYA PRADESH | 482009 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹39 L
EMD Value
₹78,000
Closing Date
17 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JABALPUR
HQ CWE JABALPUR OPPOSITE SUPPLY DEPOT SADAR JABALPUR 482001
PROVISION OF X-RAY ROOM AT MH UNDER AGE (I) PACHMARHI.
2024_MES_647366_1
83235/E8
Open Tender
Civil Works
Item Rate
270 days
PACHMARHI
AS PER NIT
7 documents required · 7 mandatory
₹500
Yes
AGE I PACHMARHI
₹78,000
Yes
23 Jul 2024
21 Mar 2024
19 Apr 2024
21 Mar 2024
17 Apr 2024
5 Apr 2024
21 Mar 2024 - 4 Apr 2024
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified & directed.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of pipe, cable etc or n. exc.10 Sqm on plan and getting out in soft/disintegrated rock complete all as specified and directed.
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
M&L for ATT Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.
M&L for ATT Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
M&L for ATT Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.
M&L for ATT Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area surface complete all as specified and directed.
M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed.
Supply & fix factory made solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified & directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed in frame complete all as specified & directed.
Supply & fix 250mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed.
Supplying & fixing 100mm size butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type B-21 complete all as specified & directed.
Supplying & fixing 100 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
Supplying & fixing 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.
Supplying & fixing 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.
Supplying & fixing aluminium handles 150 mm size, cast type, anodised complete all as specified & directed.
M&L for scratch free light shade vitrified floor tiles, minimum 10mm thick (square/ rectangular),double charged, area of each tile exc 0.36 Sqm but not exc 0.42 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified & directed.
M&L for 14 mm thick X-ray protective tile 100 % lead free with 2 mm thick lead free mobile protective barrier sheet in any shed suitable for X-ray room exceeding 0.36 sqm but not exceeding 0.42 sqm set & jointed in adequate adhesive chemical and pointed in coloured cement to match the tile laid with and complete all as specified and directed.
M&L for 20 mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finish complete all as specified and directed.
M&L for non-skid white ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.
M&L for glazed ceramic white tiles 350x250x7mm or 450x350x7mm thick as approved by GE on vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.
M&L for 18-20mm thick granite of approved quality as in platform i.e. in horizontal & vertical position, machine cut (table rubbed and polished) laid over and including 15mm thick rendering in CM 1:4 and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
M&L for Precast reinforced cement concrete type B1, 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 using cover slab for manholes complete all as specified and directed. ( Note : Reinforcement shall be measured and paid for separately against relevant items of this BOQ)
M&L for 100 mm thick, PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving and the like etc considering the floor slope complete all as specified and directed.
M&L for 25 mm thick, PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in sub base of floors and the like etc considering the floor slope complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed.
M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete and sub base of floors, path/ paving etc complete all as specified & directed.
M&L for PCC (1:2:4) type B-1, using 40mm graded stone aggregate as in manhole, surface channel and drain including saucer drain and toe wall etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.
M&L for 40 mm thick cement concrete cement concrete 1:2:4, type B-0, Damp proof course to horizontal or vertical surfaces including necessary formwork etc complete all as specified & directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified & directed.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished square, rectangular or polygonal surfaces of concrete complete all as specified & directed.
M&L for formwork for rough finish to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.
M&L for formwork for rough finish to soffits of suspended slabs such as roof slabs, floor slabs, landing slab and similar work, not exceeding 200mm thick complete all as specified and directed.
M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
M&L for Formwork to chullah hoods, chajjas, troughs and similar items complete all as specified and directed.
M&L for RCC design mix M-25 (using 20 mm graded crushed stone aggregates) as in foundations, footing, plinth beams, bases for columns, mass concrete and the like etc for boundary wall complete all as specified & directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.
M&L for RCC design mix M-25 (using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts and the like etc; complete all as specified & directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.
M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in floor/ roof beam, cantilevers, lintel over 1.5m span complete all as specified and directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.
M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, and in shelves complete all as specified and directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.
M&L for RCC (design mix) M-25 (using 20mm graded stone aggregates) as in chajjas complete all as specified and directed. Note:- Reinforcement shall be measured & paid for separately under respective item of BOQ.
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note:- (Payment for providing grooves shall be made separately under respective item of BOQ. )
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for mild steel TMT bars 8mm dia. as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for mild steel TMT bars 8 to 10mm dia as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F of framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.
S&F suspended false ceiling grid system using chicago metallic (E Grid) exposed suspended system, grid size 600 x 600 mm comprising of GI powder coated main runner 39 x 24 x 0.8 mm (Thickness comprising of GI/0.4mm + PPPCGS/0.3mm and min weight of runner 1.35 Kg for 3600mm length), cross tee 29 x 24 x 0.80mm (Thickness comprising of GI/0.4 mm + PPPCGS/0.3mm and min weight of angle 0.195 Kg for 600mm length) and wall angle 22.2 x 22.2 x 0.65 mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.3mm and min weight of angle 0.7 Kg for 3050mm length) with and including 4mm thick HPSC (High Pressure Steam Cured) pre-primed, self embosed, textured design board, water resistant, termite resistant, fire resistant for insulation and acoustic purpose to be placed in grid system duly suspended with @ 1.2m c/c both way with 4 mm dia GI wire hangar fixed with steel dash fasteners or from purlin of roof with butterfly clips (wt 0.007kg), hold down clips (wt 0.0035kg) etc complete, ( main runner / cross tee /wall angle of Galvanised Iron powder coated), as per manufacturere instruction complete all as specified and directed. Note : Cost of making frame work and board (cut out) for fixing light fitting grill diffuser etc shall be deemed included in the quoted rate.
M&L for 60 mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles confirming to IS 15658-2006, M-35 designation of concrete, section as approved by AGE(I) in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.
M&L for Stone kerb of roughly squared lime or sand stones of size 20cm x 30cm, all surfaces hammer dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 20mm jointed in cement mortar 1:6 and struck flush complete all as specified & directed.
M&L for 12 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.
M&L for 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.
M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.
Supply only water proofing compound (liquid) ISI marked of make as approved by GE complete all as specified & directed.
M&L for 5mm thick rendering on fair faces surface in cement plaster (1:3) as in ceiling and fininshed surface even and fair complete all as specified and directed.
M&L for applying evenly tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm after cleaning the surfaces over & including a coat of bitumen primer @ 0.30 litre/ sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil on the top of prepared roof surfaces complete all as specified & directed.
M&L for unrolled over the bitumen coated surface, 3mm thick spun bonded non-woven polyester reinforced APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm with minimum over lap of 100mm and over lap shall be sealed by flame as per manufacturer's instructions complete all as specified & directed. Note:- Suitable embedment of APP modified water proofing membrane shall be ensured into walls/parapet walls, special care shall be taken in laying APP modified water proofing membrane in situations such as drain/ expansion joints etc.
M&L for applying a coat of bituminous aluminium paint @ 100gm/ sqm and blinding material such as dry sand @ 0.75Kg/ Sqm over & including a coat of hot air blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm over polymeric membrane complete all as specified & directed. Note- Bituminous aluminium paint shall be of same manufacturer's as specified for polymeric water proofing membrane.
M&L for 10 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.
M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and apply two coats of oil emulsion distemper over 2mm thick of Birla/ JK wall care putty over a coat of cement primer for smooth finish of wall complete all as specified and directed.
M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE over and including a coat of red-oxide primer complete all as specified & directed.
Supply & fix 15mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.
Supply & fix 20mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.
Cutting existing steel tubing for alterations or additions of pipe size 40/50 mm bore and screwing complete all as specified and directed.
Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.
Supply & fix, 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high dencity plastic ball, screwed for iron pipe or brass ferrule complete all as specified & directed. (Note-Min weight should not be less than 210 gms)
Supply and fix 15mm dia stop valves/ angle cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified & directed.
S&F 15mm dia bib cock,cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down for iron pipe or brass ferrule complete all as specified & directed.
Supply only pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia complete complete all as specified & directed.
Supply & fix vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed.
Supply & fix stainless steel soap dish disc wall mounted (oval) type, glossy finish including all necessary screws of same finish of pattern complete all as specified and directed.
S&F Harrison rails, anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
Supply & fix vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) but plastic water closet seat, black/ white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified & directed.
Supply and fix 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed.
Supply and fixing of 15mm bore PVC connection pipe 300 mm long with PTMT nuts complete all as specified & directed.
Supply and fix 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floor with & including necessary clamps of requird size etc complete all as specifed & directed.
Supply and fix 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to wall with & including necessary clamps of requird size etc complete all as specifed & directed.
Supply and fix 110mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed.
Supply and fix 75mm bore PVC (SWR) bends of any radius provided with access door complete all as specified & directed.
Supply and fix 75 mm bore PVC (SWR) vent cowl complete all as specified & directed.
Supply & fix PVC (SWR) junction single (single T), equal or unequal provided with access door, 75 mm bore complete all as specified & directed.
S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F aluminium anodised tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.
Supply & fix 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
M&L concrete bed to pipes in PCC (1:3:6) type C2 including packing under and haunching against the sides of pipes after they are laid on slope and tested for 150 mm bore drain pipe line complete all as specified and directed.
Supply & laying for RCC hume pipe 150 mm bore, class NP2 laid and jointed complete all as specified and directed.
M&L for anodized aluminium powder coated door with frame side top and sides of size 92x31.75x1.5 mm (Section No. 20831), bottom size 92x31.75x1.5 mm (Section No. 20832) and shutter top and bottom size 40x18x1.55 mm (Section No. 20736) and sides (handle) of size 40x18x1.55 mm (Section No. 20738) and lock side shutter frame of size 40x18x1.55 mm (Section No. 20737) including rubber gasket, beading and locking arrangement and including fixing 5 mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting, cill and making good to disturbed portion complete all as specified and directed.
M&L for anodized aluminium powder coated three track sliding window frame side top and sides of size 92x31.75x1.5 mm (Section No. 20831), bottom size 92x31.75x1.5 mm (Section No. 20832) and shutter top and bottom size 40x18x1.55 mm (Section No. 20736) and sides (handle) of size 40x18x1.55 mm (Section No. 20738) and lock side shutter frame of size 40x18x1.55 mm (Section No. 20737) including rubber gasket, beading and locking arrangement including making good to disturbed portion complete including stainless steel wire staples and including fixing 5 mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting, cill and making good to disturbed portion complete all as specified and directed.
M&L for anodized aluminium powder coated ventilator louvers type frame top and bottom of size 31x42x1.6 mm (Section No. 20558), rectangular tube of size 40x20x2 mm (Section No. 14019) and middle vertical of size 42x46.20x1.6 mm ( Section No. 20560) and clip for fixing in wiremesh and glass of size 19x17.30x0.90 mm (Section No. 19360) including rubber gasket, beading and locking arrangement including making good to disturbed portion complete including stainless steel wire staples and including fixing 5 mm thick glass with necessary rubber beading gasket etc including necessary plaster, painting, cill and making good to disturbed portion complete all as specified and directed.
S&F aluminium anodised grill of 7.00 mm dia square, rectangular, triangular and circular shape aperture n.exc 7 cm in length or width fixed with H or F channel complete all as specified and directed.
M&L for swing type lead lined door with frame of X-ray protection from radiation with 02 mm thick lead sheet and interlocking stainless steel sheet as a door material with 100 mm minimum overlapped each side including self closing hydraulic device complete all as specified and directed.
S&F for 02 mm thick radiation sheilding lead sheet on vertical surface complete all as specified and directed.
S&F for 08 mm thick radiation sheilding lead glass on vertical surface complete all as specified and directed.
Hard core of stone (granite/ basalt/ trap) boulders or broken stone of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/ regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one light/ fan/ exhaust fan/ bell point controlled by one no one way piano type switch 5/6 Amps complete all as specified & directed.
M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on the same board with other switches complete all as specified & directed.
M&L for point wiring concealed type with 1.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/5 pin, 5/6 Amps controlled by one no one way piano type switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed.
M&L for point wiring concealed type with 2.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed.
Supply & fix switch piano, flush type single pole, one way 5/6 Amps, 240 volts complete all as specified & directed.
Supply & fix switch piano, flush type single pole, one way 6/16 Amps, 240 volts complete all as specified & directed.
Supply and fix in repairs, angle type lamp holder insulated with polycarbonate body and back plate housed with porcelain base complete all as specified and directed.
Supply & fix moduler type, rotory stepped type electronic fan regulator mini flush type 100/120 W, 240 Volts-50Hz complete all as specified & directed.
Supply & fix socket outlet 2 in 1, 2 pin 5/6 Amps and 3 pin 5/6 Amps, flush universal type complete all as specified & directed.
Supply & fix socket outlet 3 pins 15/16 Amps flush type complete all as specified & directed.
Supply & fix ceiling rose, surface bakelite, 65x50mm surface type, two to three terminals, AC 240 volts complete all as specified & directed.
Supply and fix SPN DB, 8 way double door sheet metal enclosure single pole and neutral, IP 43-IK 09 with metal door, 230 volts with copper bus bar of 200A suitable for fixing MCBs, Isolators etc complete all as specified and directed.
Supply and fix SPN DB, 4 way double door sheet metal enclosure single pole and neutral, IP 43-IK 09 with metal door, 230 volts with copper bus bar of 200A suitable for fixing MCBs, Isolators etc complete all as specified and directed.
M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4.0sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .
Supply & fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240V complete all as specified & directed.
Supply & fix MCB SP 6 to 32 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.
Supply & fix MCB SPN, 40 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.
Supply & fix MCB four pole 63 Amps, 'C' series, 240 volts, 50Hz, 10kA complete all as specified & directed.
Supply and fix ETPN DB, 4 way double door sheet metal enclosure single pole and neutral, IP 43-IK 09 with metal door, 415 volts with copper bus bar of 100A suitable for fixing MCBs, Isolators etc including taking down old complete all as specified and directed.
S&F LED light fitting, 10 watt, bulk head luminaires, environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon Back-lit LED luminaire comprising of high brightness LEDs with lamp holders, etc complete with all accessories pre-wired with and connecting the same using copper conductor 23/0.0076 flexible twisted twin core cable complete all as specified and directed.
Supply and fix CIRRUS indoor commercial suspended-recessed LED office general luminaires having excellent energy savings and maintenance free operations suitable for 2'x2' grid ceiling and necessary hidden connections with & including two core copper cable of suitable size from ceiling rose to fittings complete all as specified & directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed.
M&L for earthing complete with galvansided steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of pipe, cable etc or n. exc.10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.
Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 35 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc and testing on completion complete all as directed.
Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. (Note :- Punned thickness will be measured)
Supply and laying un-reinforced precast concrete cable cover, class LV, type1 , Flat, size 250mmx150mmx40mm laid in trenches for underground cable complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.
Supply and fixing Single phase propeller type ventilating ( Exhaust fan) AC 230 volts 150 mm sweep, speed range 1200 rpm plastic body with insect protection, motion sensor and motorized louvre and full copper motor provides high speed and silent operation complete including making holes of suitable size and making good the disturbed surface and shutters including electric connection with PVC flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.
Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in-built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and 1.5 TR capacity, Compressor Inverter Rotary Type, Frequency - 50 Hz, voltage 230V Refrigerant-R32, Single Phases, Copper Coil , Rated ISEER 5.00, Wall Mounted, Moisture Removal, Turbo Cool, Fix & Lock (4 in 1 convertible), Smart Ready, Comfort Sleep , Anti-Corrosive Blue Fins for Protection, Acoustic Jacket around Compressor complete all as specified and directed
S&F automatic voltage stabilizer, single phase, digital display, naturally air cooled, indoor type, wall mounted design for input variation of 90V-300V, 50 Hz (suitable for 1.5 TR 5 star rating AC) with output voltage stabilizer at 230 V with accuracy of +2.5% complete all as specified & directed.
M/S Shanti Enterprises
DEEPAK JAISWAL
PADAMSHRI CONSTRUCTION CO
SHRI KRISHNA CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .