Repair,Renovation and Up-gradation of Refurbishing Physical Health Infrastructure and Strengthening Basic Pateint Amenities at Kuamara OH under G.B Nagar Block in the district of Mayurbhanj Under AMA HOSPITAL INITITATIVES (2nd Phase)

Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge.

Main Gate with Cow Catcher

Drainage with Slab

Approach Road

Parking Shed

Boundary Wall

Gardening

Toilet Complex (Male & Female)

Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete.

Main Gate with Cow Catcher

Drainage with Slab

Approach Road

Parking Shed

Boundary Wall

Gardening

Toilet Complex (Male & Female)

Providing and applying of Post construction Anti-termite treatment by drilling 12mm dia. holes at distance of 30cm @ junction of wall and floor about 300mm aprt deep enogh to reach the soil below and chemical emulsion (PREMISE, IMIDACHLOPRIED 30.5SC OF BAYER MAKE mixed with 47.5 ltr water) pumped these holes to soak the soil @ 1 ltr soulation of each hole as per manufactures specification and the holes should be pluged with filling materials including cost of all material, labour conveyance and hiring charges of machinaries all taxes as per direction of EIC.

Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth.

Main Gate with Cow Catcher

Drainage with Slab

Approach Road

Parking Shed

Boundary Wall

Gardening

Toilet Complex (Male & Female)

Cement Concrete (1:2:4) with 12mm size hard granite chips etc complete.

Drainage with Slab

R.C.C. work of M-20 using 20 mm and dowm graded cb. Chips with cost carriage of all materials etc. complete.

Column Base

Main Gate with Cow Catcher

Parking Shed

Boundary Wall

Toilet Complex (Male & Female)

Grade Beam

Main Gate with Cow Catcher

Parking Shed

Boundary Wall

Toilet Complex (Male & Female)

Column

Main Gate with Cow Catcher

Parking Shed

Boundary Wall

Toilet Complex (Male & Female)

Pattient Attendant Rest shed

Lintel

Toilet Complex (Male & Female)

Roof beam

Main Gate with Cow Catcher

Toilet Complex (Male & Female)

Roof slab

Main Gate with Cow Catcher

Toilet Complex (Male & Female)

Drain Slab :-

Drainage with Slab

Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification.

Main Gate with Cow Catcher

Drainage with Slab

Parking Shed

Boundary Wall

Toilet Complex (Male & Female)

Pattient Attendant Rest shed

Rigid and smooth centering and shuttering for RCC works including false works and dismantling them after casting including cost of materials complete in ground floor

Drainage with Slab

Brickwork with Fly Ash bricks in cement mortar (1:6) in Foundation and Plinth including watering curing etc.

Main Gate with Cow Catcher

Parking Shed

Boundary Wall

Gardening

Toilet Complex (Male & Female)

Brickwork with Fly Ash bricks in cement mortar (1:6) in Super structure with cost carriage of all materials etc.

Parking Shed

Boundary Wall

Gardening

Brickwork with Fly Ash bricks in cement mortar (1:4) in Super structure with cost carriage of all materials etc.

Toilet Complex (Male & Female)

16 mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.

Boundary Wall

Gardening

Toilet Complex (Male & Female)

Repair & Renovation

12mm thick c.p. 1:6 over brick work in finished smooth with cost carriage of all materials etc.

Parking Shed

Boundary Wall

Gardening

Toilet Complex (Male & Female)

Repair & Renovation

6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment.

Toilet Complex (Male & Female)

Repair & Renovation

Providing fitting and fixing of false ceiling with Aluminum anodised T Section No. 3215 with 2'-0 center to center, L section NO. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2-0 x 2" - 0" with 6mm thick plain A.C.Sheet of 125mm thick. etc. complete.

Repair & Renovation

Providing fitting and fixing of false ceiling with Aluminum anodised T Section No. 3215 with 2'-0 center to center, L section NO. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2-0 x 2" - 0" with India Gypsum board of 125mm thick. etc. complete.

Repair & Renovation

Providing for Supplying,fitting & Fixing of high Abrasion resistant Industrial Mat vitrified tile having size 1200 mm x 600 mm of approved make & shade manufactured by reputed manufacturer like Johnson S &P Ivory mat (General) and S &P Pastel brown (contrast)/ Somany Neo Grandstone Crema mat / RAK Coarstone Crema Mat / Kajaria Delphi Crema mat. on 25mm thick bed of cement mortar (1:1) filling joints with epoxy grout of approved quality to match the shade of the tiles including rubbing and polishing including cost of tile and all materials, labours, T &P etc. required for the work complete in all respect as per directed by Engineer-in-Charge.

Repair & Renovation

Fixing virtified tiles in floors,treads (600mm x 600mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Repair & Renovation

Providing for Supplying, fitting & Fixing of 600 mm x 600 mm polished Glazed vitrified tile of approved make & shade manufactured by reputed manufacturer like Somany Glacier White/ Johnson Super White/RAK Jazz White/ Kajaria Pulido balnco wall tiles in dados, skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including including cost of all materials, labours, T &P etc. required for the work complete in all respect as per directed by Engineer-in-Charge.

Repair & Renovation

Fixing glazed Ceramic tiles in floors,treads (400mm x 400mm) and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Repair & Renovation

Fixing Vetrified industrials floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size (300mm x 300mm) in floor and in rises of steps on 25mm thick bed of cement plaster (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Repair & Renovation

Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only)

Toilet Complex (Male & Female)

Fixing Granite tiles above 0.40sqm in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Main Gate with Cow Catcher

Toilet Complex (Male & Female)

Fixing glazzed wall tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile.

Toilet Complex (Male & Female)

Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.

Approach Road

Supplying and fixing of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.

Gardening

Repair & Renovation

Supplying and fixing of MS Door, MS Window Grill and Grill gate including cost of fabrication and cost,conveyance taxes etc. complete. (A/R page-225 /4)

Main Gate with Cow Catcher

Toilet Complex (Male & Female)

Repair & Renovation

Supplying and fixing of MS Door, MS Window Grill and Grill gate including cost of fabrication and cost,conveyance taxes etc. complete. (A/R page-225 /4)

Repair & Renovation

providing fitting and fixing M.S. square Pipe for roof frame with flat with cost of all materials etc.

Parking Shed

Pattient Attendant Rest shed

Providing supplying fitting and fixing of Blue scope colour G.I. Sheet including etc.complete

Parking Shed

Pattient Attendant Rest shed

Iron work wrough and put up in trusses and record racks , cow catcher (Labour only)

Parking Shed

Pattient Attendant Rest shed

Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.

Gardening

Repair & Renovation

Providing and fixing 65mm x 125mm factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory windows & other Frames/chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-charge. (Make: WPC:Century/Black Cobra/Rajshri Plastiwood, Hardware fitting: Godrej/Dorset/Link/Dorma)

Toilet Complex (Male & Female)

Repair & Renovation

Providing and fixing 30mm factory made single extruded WPC (Wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), ca

Toilet Complex (Male & Female)

Repair & Renovation

Repair & Renovation

Repair & Renovation

Repair & Renovation

Repair & Renovation

Repair & Renovation

Repair & Renovation

Repair & Renovation

Repair & Renovation

Toilet Complex (Male & Female)

Repair & Renovation

Repair & Renovation

Repair & Renovation

Repair & Renovation

Toilet Complex (Male & Female)

Repair & Renovation

Main Gate with Cow Catcher

Boundary Wall

Gardening

Toilet Complex (Male & Female)

Repair & Renovation

Toilet Complex (Male & Female)

Repair & Renovation

Gardening

Toilet Complex (Male & Female)

Repair & Renovation

Main Gate with Cow Catcher

Boundary Wall

Main Gate with Cow Catcher

Parking Shed

Toilet Complex (Male & Female)

Pattient Attendant Rest shed

Repair & Renovation

Main Gate with Cow Catcher

Parking Shed

Toilet Complex (Male & Female)

Pattient Attendant Rest shed

Repair & Renovation

Drainage with Slab

Boundary Wall

Repair & Renovation

Dismantling and removing R.C.C. Column , Beam, Slab, Stair case, Landing, lintel including etc. stacking the useful materials for reuse and removing the debris within 50 m lead

Dismantling old Building

Dismantling and removing R.C.C. Column , Beam, Slab, Stair case, Landing, lintel including etc. stacking the useful materials for reuse and removing the debris within 50 m lead

Dismantling and removing R.C.C. Column , Beam, Slab, Stair case, Landing, lintel including etc. stacking the useful materials for reuse and removing the debris within 50 m lead

Dismantling and removing R.C.C. Column , Beam, Slab, Stair case, Landing, lintel including etc. stacking the useful materials for reuse and removing the debris within 50 m lead

Dismantling and removing R.C.C. Column , Beam, Slab, Stair case, Landing, lintel including etc. stacking the useful materials for reuse and removing the debris within 50 m lead

Dismantling and removing R.C.C. Column , Beam, Slab, Stair case, Landing, lintel including etc. stacking the useful materials for reuse and removing the debris within 50 m lead

EI Work

Wiring

Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ KEI / Havels /Polycab )

-do- Group B

-do- Group C

-do- Group B

-do- Group B

-do- Group B

S/F of Angle holder replacing Ceilling Rose

Swich Boards

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.

S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 1 nos 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required

S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC

S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.

6 Modular box with base & cover

8 Modular box with base & cover

12 Modular box with base & cover

Sub-Main

Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible co

Main Switches

Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)

other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco/ CP Plus

Supply & fixing of 4MP Bullet IP CAMERA Image Sensor 4MP(2560x1440)@25/30fps ,In-built Mic, Min. Illumination Color: [email protected], POE, IP67, Smart IR Range: 50Mtrs, Sd Card-512GB,Day/Night, BLC/3D- DNR/HLC/Smart Defog Operation Condition- (-35 degree to +65 Degree) Motion Detection, Mask Alarm, IP Address conflict . Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco/ CP Plus

Supply & fixing of 4MP Dome IP CAMERA Image Sensor 4MP(2560x1440)@25/30fps ,In-built Mic, Min. Illumination Color: [email protected], POE, IP67, Smart IR Range: 50Mtrs, Sd Card-512GB,Day/Night, BLC/3D- DNR/HLC/Smart Defog Operation Condition- (-35 degree to +65 Degree) Motion Detection, Mask Alarm, IP Address conflict. Including all other materials & as directed by site-incharge Make: Honeywell/Hikvision/ Axis/ Plco/ CP Plus

Supply of 10TB HK-HDD10T,Audio/Video-24/7 Continuous Operation. Make: Toshiba/Segate

SITC of 8-Port Gigabit Switch 10/100/1000T ,8EP+2G+1SFP Al PoE Switch,Networking standard: IEEE802.3af/at/bt PoE Watchdog Al Function: Detection front-end PoE cameras and PD, Automatic detection, Automatic restart,Upload port automatic flip (Auto MDI/MDIX),FE ports can support 250 meters long distance transmission automatically,6KV lightning protection,8KV surge protection, anti-reverse connection, over-current protection, over-voltage protection, over-temperature protection, Short circuit protection,The port Max power Output is 60 watts, it is convenient for high-power device,Power Budget 300W,Energy-Efficient Ethernet, Operating Environment Temperature: 0 ~ 50°C Storage Environment Temperature: -10 ~ 70°C Operating Humidity Relative Humidity: 5 ~ 95% (non-condensing) Storage Humidity Relative Humidity: 5~95% (non-condensing)

Supply of 4U Wall Mount Rack loaded with one no 3Skt 6/16A power distribution unit, 1no cable manager, 1no 90 CFM FAN, one pkt H/W screw.Basic frame: CRCA (MS SHEET) 0.6mm thick,Construction-Welded,Top & Bottom cover: cable entry cut-outs,Front Door: Lockable-Toughened glass with Lock & Key,Toughened Glass used as an excellent thief deterrent,Standard finish: Powder coated,Dual-Tone Gray Color - fits in well with all indoor /outdoor aesthetics,Differentiator Quality,Load Bearing Capacity - 15kg,Industry leading design. Including all other materials & as directed by site-incharge Make: D-link/Dgisol

Supply CAT6 Armoured Cable,Generally confirming to EIA/TIA 568-C.2 and IEC/ISO11801,Excellent Margin with suppression of Cross Talk (NEXT),4 Pair Separator Design,23 AWG cable,For Outdoor installation. Including all other materials & as directed by site-incharge Make: D-link/Finolex

Supply and laying of 20mm pvc conduit in complete as per the direction of engineer incharge . Make: AKG

Supply of HDMI cable Extender.

Supply and fixing of 32" IPS HD Display with 440 NITS, 1200:1 Contrast Ratio, android professional display in complete as per the direction of engineer incharge.with 3yeras warranty.Supply,installation,testing & commissioning of Tv Wall Mount Bracket. Make: Sony ,Samsung,LG

Supply of Wireless mouse

Supply,installation of Rj 45 Connectors Make: Tyco-AMP/ Schneider/ Digisol .

Supply and installation of professional gooseneck microphone for podium/table-top use.Microphone Element: Condenser typePolar Pattern: Uni-directional / CardioidFrequency Response: 50-16,000 HzSensitivity: 5.5mV/PaImpedance: 200 \(\Omega \)Overall Length: 585mm (23") or longerFeatures: Sleek, high-quality audio reproduction, high front-to-back rejection for feedback reduction.GOSENECK MICKROPHONE MAKE-Ahuja,mx,studio master

Supply and installation of a sturdy, heavy-duty gooseneck microphone base.Construction: Die-cast aluminium with anti-skid feet Connectors: Female XLR for microphone, Male XLR outputPower: Requires 9V-52V DC phantom power or compatible power supply Features: On/Off switch, LED indicator for status.MAKE-Ahuja,mx,studio master

Supply and installation of connection cable. 3-core shielded low-noise microphone cable Length: 10 meters or as specified. Connectors: XLR male to 6.3mm (¼”) phone plug. MAKE-Ahuja,mx,studio master PVC Duct Pipe Size: 25mm or specified size Fittings: Ebco Circular Fittings or make AKG, POLYCAB,PRICESSION -ONLY FRLS WITH HMS GRADE PIPE

200 WATT AMPLIFIER Public address (PA) amplifier, 200 WattsType: Multi-input mixer amplifier for public address (PA) system applications. Rated output power: 200 W minimum, at 100V and 4-16Ω output. Power source: 220–240 V AC, 50/60 Hz mains supply, with an option for 24 V DC battery operation for emergency backup. Amplifier Class: High-efficiency Class-D design is preferred. Frequency response: 50 Hz to 15,000 Hz (±3 dB). Total Harmonic Distortion (THD): Less than 2% at rated output power. Signal-to-Noise (S/N) ratio: 60 dB or more (for microphone inputs); 70 dB or more (for auxiliary inputs). Output regulation: Less than 2 dB (no load to full load at 1 kHz). Input channels: Minimum of 4 microphone inputs (with phantom power capability on at least one channel) and 2 auxiliary inputs. MAKE-Ahuja,mx,studio master

WALL SPEAKER2-way flush-mount speaker suitable for indoor PA systems. Rated Power: 20W RMSPower Taps (on 100V line): 20W, 10W,5W Frequency Response: 90–18,000HzSPL (1W/1m): 91dB at 1kHz Speaker Components: 150mm (5") woofer, 25mm (1") tweeter Dimensions: ø200 × H85 mmConstruction: Moulded plastic frame withmetal mesh grill Features: Wide frequency response, adjustable tweeter, and built-in 100V line matching transformer. MAKE-Ahuja,mx,studio master

en-Free Copper (OFC) to ensure high conductivity, low distortion, and corrosion resistance..1.5 sq.mm (approx. 16 AWG) or higher, as required by the system design andycabable run length.MAKE - finolex ,polycab,mx PVC Duct PipeSize: 25mm or specified sizeFittings: Ebco Circular Fittings or make AKG, POLYCAB,PRICESSION -ONLY FRLS WITH HMS GRADE PIPE

INSTALLATION OF CH&DE UNIT AND WIRING OF SPEKER,SOLDERING AND JOINTING

Providing for Supplying, fitting & Fixing of 600 mm x 600 mm polished Glazed vitrified tile of approved make & shade manufactured by reputed manufacturer like Somany Glacier White/ Johnson Super White/RAK Jazz White/ Kajaria Pulido balnco wall tiles in dados, skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including including cost of all materials, labours, T &P etc. required for the work complete in all respect as per directed by Engineer-in-Charge.

Dismantling and removing old tiled cladding from walls including racking out joints 12mm deep, stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the E.I.C

Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor

Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/ Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C

Supplying all materials,labour,T&P and fitting & fixing of U-PVC SWR soil waste ventilating pipes & fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including testing and refilling and trenches as per direction of E.I.C. (a) 110mm dia PVC pipe

110mm dia PVC'P' trap

8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C.

Supplying all materials,labour,T&P and fixing wash basin of ISI mark of with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C . (Hindware/Parryware/Cera/Equivalent) (a) 550mmx400mm size WHB

Pedestrial for WHB

Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C. 600x450x250 mm stainless steel kitchen sink (Good Quality)

Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. 600mmx450mm size (fixed type)

Supplying all materials,labour,T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80) and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C. (a) 20mm dia PVC (ASTM) Pipe (Internal)

25mm dia (ASTM )PVC Pipe

32mm dia (ASTM )PVC Pipe

15mm dia PVC inlet Connection Pipe

32mm dia PVC Waste Pipe

Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.

Supplying all materials,labour,T&P and cutting holes in RCC,floors,roofs etc. upto 19cm thick for passing G.I/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.

Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C. a)upto 300mm wide

Supplying all materials,labour,T&P and fixing brass/CP fittings conforming to IS 781 of the following nominal bore with supply of all jointsing materials complete as per specification and direction of E.I.C. (Plaza/Amber).

15mm dia C.P Bib Cock(L.B)

15mm dia C.P Bib cock(S.B)

15mm dia C.P Twin Bib cock

15mm dia C.P Health Fuccet

15mm dia C.P Pillar cock

15mm dia Angle Stop Cock

15mm dia CP Wall Mixture (2-in-1)

15mm dia Concealed Stop Cock

15mm dia CP Flange

15mm dia CP Extension Piece

25mm dia PVC Ball valve

Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.

Glass self

Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C. (a) 20mmx450mm long CP towel rail

CP towel ring

Supplying all materials,labour,T&P and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of E.I.C. (a) 15mmx100mmlong

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tankconforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 2000 lits capacity on the roof of ground floor

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (A) 2000 lits capacity on the roof of ground floor

Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Supplying all materials, labour, T&P and constructing Rain water Harvesting Pit of the following size with precast R.C.C rings, with 1st class KB brick work in CM (1:4) from bottom to top, 12mm thick Cement Plaster (1:4) with punning inside wall and Cement flush pointing at the outside of the wall over masonry brick work, packing Sand at Bottom and gravel at top in the rear of well steining for filteration of rain water, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.

Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and aound trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C. (A) Gully Trap Chamber (0.25 x 0.25 inside Size)

Hot and Cold Drinking water

Supplying all materials labour T&P and providing, fitting and fixing Aquaguard The

Supplying all materials,labour,T&P and providing brickwork with KB brick having crushing strength not less than 75kg/cm2 with dimensional tolerence of +/-8%in cm(1:4) including watering, curring, conveyance of all materials to work site,payment of royalty, taxes etc all complete as per P.H specification and direction of E.I.C. (a) In Foundation and Plinth in C:M (1:4)

Supplying all materials,labour,T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C. 4.759sqm

Supplying all materials, labour, T&P and providing MS reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.