Upgradation Improvement of Environs of Khan Market Phase-II. SH Improvement of Middle lane with the provision of laying drainage system pavement and flooring in Khan Market.

Amount

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or leaner mix (including equivalent design mix)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Taking out R.C.C cover from drain/open channel of average size 670x370x70mm including demolishing of minor R.C.C. /C.C work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kind of soil.

Providing and laying 400mm ID-Rex double wall corrugated (DWC)HDPE pipe having stiffness class SN8,IS code-IS 16098 part-2 , smooth finish inside with push fit /ring fit connection type couplers etc all of reputed make complete as per instruction directions and entire satisfaction of Engineer -In - Charge.

Providing and laying 150 mm ID-Rex double wall corrugated (DWC)HDPE pipe having stiffness class SN8,IS code-IS 16098 part-2 , smooth finish inside with push fit /ring fit connection type couplers etc all of reputed make complete as per instruction directions and entire satisfaction of Engineer -In - Charge.

Constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including D.I grating of size 450x450 mm with outer frame of size 630x630mm having minimum weight of 56 kg/set of reputed make complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement complete as per standard design :Inside size 120x90 cm and 90 cm deep including D.I manhole cover of size 560 with frame of size 710x710 mm having weight not less than 80KG/each set of reputed make complete :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note: No extra cement in design mix shall be payable separately. . All works upto plinth level : Concrete of M15 grade with minimum cement content of 240 kg /cum

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing 30mm granite manhole cover of avg. size 560 mm dia with frame of required size Stainless Steel Frame including demolishing of existing manhole cover & frame including minor R.C.C. /C.C work manually/ by mechanical means and stacking of useful materials near the site complete including all required fixing as per direction of Engineer-in-charge. ( the existing manhole cover and frame shall be taken out & stacked with in 50m lead & S.S for Framne and base of Cover shall be paid seperately.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing & fixing Leather finish Granite stone slab flooring over 50 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete as per instructions directions and sample approval by Engineer in charge.60mm thick Leather finish Granite of Required colour as per sample approval by Engineer in charge

Providing and palcing in position the factory made precastcement concrete block of size 600x300x300mm or as per sample approved by Engineer-in -chargeof grade M-25 including the cost of required centering and shuttering complete with reinforcement of 6mm dia steel reinforcement including staightening,cutting,bending ,placing in position and binding complete upto plinth level @maximum 100mm c/c on both ways ,in two layers with finished surface etc complete as perdirection and entire satisfaction of Engineer-in -charge.

Fabrication, Supplying and Installation of required shape and size SS 304 Grade center mounted wire mesh twin type dustbin . The bin should be easy to tilt i.e. bin shall be able to be rotated around the horizontal axis fully for easy removal of garbage from the bins with 2 nos circular drum of size 375mm dia x 570 mm high (minimum) fabricated with 3mm dia bar and supported on tubular pipe of 50mm dia having minimum wall thickness 1.60mm and 4.00 mm thick M.S base plate of size 400x150mm which shall rest on the precast C.C. block and shall have required holes to enable fixing to the ground /in concrete blocks with 12 mm dia and 200 mm long SS anti theft dash fastners including all joints indicated in the drawing shall be TIG welded (Welder should be TUV certified) and smoothly finished including grinding ,buffing, polishing etc with 4 numbers of knobs made on CNC/VMC machine to hold plastic bags.Dustbin should have perforation and circular cutting made on laser cutting machine NDMC logo with engraved letters as per drawing through laser machine on SS plate dry/wet/waste in bilingual language to be maked on type XI retre reflective sheet and be pasted on top circular strip of drum of bin as per drawing .Dustbin should be complete in all respect as per drawing and as approved by Engineer-in-charge.(Capacity of dustbin should not be less than 120 litres and approximate weight of complete bin shall be 32.60 Kg) .For payment weight of stainless steel complete twin bin including base plate shall be considered only .The required chemical fasteners of HILTI make of minimum size 200mm long embeded in concrete block etc and final drawing and design of bin shall be as per direction and direction and satisfaction of Engineer -in -charge (The payment for precast CC block and SS fasteners will be made seperately).

Constructing brick masonry chamber for underground D.I. brick chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) D.I. cover of size 455x610 mm with frame of size 755x755 mm having weight not less than 55 Kg / each set, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329 150 mm dia Ductile Iron Class K-9 pipes

Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and the cost of rubber gasket : 150 mm dia pipes

Providing and laying S&S C.I. Standard specials such as tees, bends, collars tapers and caps etc, suitable for flanged jointing as per IS : 1538 : Up to 300 mm dia

Providing and laying 80mm thick faciory made cement concrete interlocking paver block of M -40 grade made by PLC block making machine with strong vibratory compaction in required stages, of approved size,colour, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12mm cement Plaster

Providing and fixing in position D.I. manhole cover 560mm Dia and frame 710x710mm of approved quality having weight not less than 55Kg/ set including fixing complete as per instruction .direction and entire satisfaction of Engineer -In - Charge

Labour for cutting C.I /PVC/HDPE pipe of dia upto 150 mm with steel Shaw /grinder etc including making joint with 150 mm dia DWC HDPE pipe complete as per instruction ,direction and entire satisfaction of Engineer- in - charge.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For Pipe 100 to 250 mm dia.

Providing and laying 250mm ID-Rex double wall corrugated (DWC)HDPE pipe having stiffness class SN8,IS code-IS 16098 part-2 , smooth finish inside with push fit /ring fit connection type couplers etc all of reputed make complete as per instruction directions and entire satisfaction of Engineer -In - Charge.

Disposal of building rubbish/malba/similar unserviceable, dismanteled or waste materials by mechanical means, including loading, transporting and unloading the same at any C&D Waste management site within 25 km lead i.e. Shastri park/Burari/Mundka including weighing at plant etc, complete as per direction of Engineer-in-charge. Weighing and unloading at the plant shall be as per procedure/rules of the plant management. The rates are inclusive of all operations, labours, leads and lifts from site of work to the C&D waste plant. The processing fee of C&D management at prescribed rates will be deposited by the agency and the same shall be reimbursed by the department on production of only original cash receipts.

Purchase & taken away the dismantled unserviceable material which is to be received from the work which shall be taken away by the contractor as and where basis for which cartage shall be born by the contracor him self against these material.Payment shall be made by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials. .(i) Bricks

Purchase & taken away the dismantled unserviceable material which is to be received from the work which shall be taken away by the contractor as and where basis for which cartage shall be born by the contracor him self against these material.Payment shall be made by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials. (ii) Interlocking pavers.

Purchase & taken away the dismantled unserviceable material which is to be received from the work which shall be taken away by the contractor as and where basis for which cartage shall be born by the contracor him self against these material.Payment shall be made by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials.(iii) Bricks bats

Purchase & taken away the dismantled unserviceable material which is to be received from the work which shall be taken away by the contractor as and where basis for which cartage shall be born by the contracor him self against these material.Payment shall be made by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials. (iv) RCC Slab 675 x 370 x 70 mm size

Purchase & taken away the dismantled unserviceable material which is to be received from the work which shall be taken away by the contractor as and where basis for which cartage shall be born by the contracor him self against these material.Payment shall be made by the contractor to the department or necessary recoveries shall be made from the bill as per the quantities received for different materials. (v) Manhole Cover Frame dia 860m

JBM CONSTRUCTION (BID ID -1615372)

ABHIMANYU LAMBA (BID ID -1615275)