SPECIAL REPAIR TO BLDG NO P-501 CIVIL LINE, NAGPUR UNDER GE KAMPTEE.

Amount

Dismantling floor, heart or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolation of cement concrete of any description and in any position not otherwise specifically provided for as specified and directed.

Material and labour for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even and smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and as directed. specified. Note : Rate for form work incl in the rate quoted by the contractor.

Material and Labour for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including preparation of surfaces complete all as specified and directed Note:- Painting to be executed by mechanical means through authorized applicator of approved make.

Material and labour for Grouting in Brick/RCC/ wall/floor/roof through PVC nipples at a spacing of 45 to 60 cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizer admixture like FOSROC (model CEBEX100) or PIDILITE (MODEL 207 PIDICRET 8AM) @ 225GMS/50kGS of cement to fill up all capillaries/voids/honeycombing, nozzles to be sealed with sealing with pressure of 2 to 4 kg/sq cm and continued till refusal. After instructions complete all as specified and directed. Note:- After ascertaining the location of leakage/seepage/dampness under relevant item shall be operated of the required location.

Supply and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Damp Block 2K Supremo or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. Applying Smart Care Damp Block 2K Suprema in two coat 2 kg/sqmt consumption, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc, complete as per manufacturers specifications and as directed.

Material and labour for applying one coat of epoxy resin (FAIR BOND EP) on old concrete/brick surfaces @ 0.30Kg/Sqm including preparation of surfaces as per manufacturer's instructions and applying 25mm thick (average thickness) of cement and sand (fine grit) in ratio 1:4 mixed with chloride free spray concrete plasticizer (spray crete) as per manufacturer's instruction with guniting machine of pressure capacity not less than 5 Kg per Sqm and finished the surface even and smooth in CM 1:4 complete all as specified and directed for buildings not more than triple storeyed complete all as specified and as directed. Make : Fairmate chemicals or equivalent make of Pidilite/Fosroc.

Material and labour for cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed.

Making good under cills (or over arches, lintels and bressummers) including all pining as necessary in cement mortar (1:4) complete all as specified and directed

Supply and fix wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam, chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3 complete all as specified and directed.

Material and labour for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even and smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water all as specified. Note : Rate for form work incl in the rate quoted by the contractor.

Material and labour for Post Construction Anti Termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, etc complete all as specified and directed.

Material and labour for Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate in sub base/ mass concrete complete all as specified and as directed.

M & L for 100mm thick Plain Cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) as in sub floor complete all as specified and as directed.

M&L 25 mm thick cement concrete type B1 1:2:4 using (20mm graded stone aggregate) in floor finishes complete all as specified and as directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, light shed area of each tile not exceeding 0.36 sqm in Skirting etc set and including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 as specified and directed

M&L joint free colored non skid ceramic tiles 6 to 7 mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:4 as specified and directed.

M&L colored glazed ceramic tiles in vertical surface 300x 450x 6-7mm thick set and jointed in neat cement slurry and pointed in site or color cement to match including rendering 10mm thick in cement mortar 1:3 complete all as specified and as direted.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1 :6 complete all as specified and as directed.

M&L for chamfering half rounding of edges of cudappa/ granite slab as in platform vertical support and edge poloshing complete all as directed

M&L for glazed Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over a layer of fine river sand, watering and consolidating complete all as specified and as directed. (Note: Sand will be measured paid for seperately under respective item supplied only).

Supply only river bed fine sand for screed bed for paving flooring complete all as specified and as directed.

Material & labour for glazed PCC chequered tiles with grey cement and pigment 30cm X 30cm X 30mm thick set & jointed in neat cement slurry as in path, pavement ,floors, etc. over 20mm thick screeding of CM 1:6 all as specified and as directed

Dismantling of brick work or stone/boulder masonary built in cement mortar including ashlar facing dressed stone and pre-cast concrete articles complete all as specified and directed

M&L for old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone wall, etc including raking out joints hacking for key, scrubbing down with water etc complete all as directed.

M&l for rendering 10mm thick in cement plaster in cement mortar 1:6 , finished even and smooth without using extra cement complete all as directed.

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work using water proofing compound as per manufacture instruction (WPC shall be measured separately).

Supply only liquid water proofing admixture of make-pidilite or equivalent.

M&L for rendering 5mm thick in cement plaster in cement mortar 1:3 , finished even and smooth without using extra cement complete all as directed.

Demolition of RCC of any description and in any postion not otherwise specifically provided for etc complete all as specified and as directed.

M&L for formwork to chullah hoods, chajjas troughs and similar items including edges etc complete all as specified and as directed.

M&L RCC 1:2:4 type B0 (using 12.5mm graded aggregate ) as in chajjas etc complete all as specified and as directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) area not exc 1.5 sqm complete all as specified and as directed.

Taking down door / window frame with shutter of any description (without taking of shutter from the frame ) but area exc 1.50 sqm but not exc 4 sqm.

Taking down shutters of any description exc 1.00 Sqm but n. exc. 2.00 Sqm complete all as specified and directed.

S & F and 2nd class hard wood plain solid straight chowkats & frame wrought framed on the solid rounded or chamfered put together with glue pinned at joints. complete all as specified and as directed.

S&F 30 mm thick flush shutter solid core construction with block board core and plywood face pannel commercial type on both faces as directed by Engr-in charge.

S&F 35 mm thick plain framed panelled factory made shutter made out of IInd class hard wood rail and styles and panel of 12 mm thick veneered particle board or 9 mm thick plywood with commercial veneering on both faces the size of rail and style as per IS 1083 (part-I) kiln seasoned an chemically pressure freated of any number of panel all as directed and directed.

S&F 30 mm thick second class hard wood for windows glazed and ,skeleton shutter open and prepared to receive glass , gauge etc. (without sash bars), edge of framing plain,chamfered or rounded. Fitted with cut and mitred beads for securing glass etc size of member of shutters as specified in SSR part -I as complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.

S/F Factory made solid PVC panelled door shutter 30mmthick (Style) consiting of frame made out of MS tubes for top & bottom rails ,MS frame shallbe covered withheat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and palin colour PVC sheet for Toprail : panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealedto the style and rail withsuitable PVC sheet beading and jointed toghether with solvent cement etc fixed with frame at site complete all as specified and as directed.

S&F mild steel medium weight could roll 100mm size butt hinges complete all as specified and as directed.

S&F for 300 mm aluminium anodises sliding door bolts, with hasp, clips of nsheet, cast or extruded section and fixing bolts and sections or cast -aluminum alloy and fixed complete all as specified and as directed.

S & F 150 mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed

S&F for 150 mm aluminium handles cast type anodised complete all as specified and as directed.

S&F for 150mm floor door stopper of anodised aluminium alloy fixed complete all as specified and as directed.

S&F framed work such as grills ,guard bars with mild steel Square bars with ends of bars shouldered and/ or riveted and similar work confirming to FE 290 Gde-E-165 complete all as specified and as directed.

S&F Anodized aluminium frame for doors,window,ventilator with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F Anodised aluminium window and ventilator shutters, door side hung type/Sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fix aluminium (powder coated ) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as per manufacturer's catalogue and specifications complete all as specified and directed. (Notes : (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item; (ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tint (Make of Aluminium Sections powder coated : Jindal or equivalent of JINDAL).

S&F 4.8 mm thick tinted glass and glazing with rubber beading and aluminium glazing bar in each panel but exc. 0.5 Sqm each complete all as specified and directed

M&L Prelaminated particle board 12mm thick interior grade laminated one side with decorate choice lamination and other side balancing white lamination, fixed with screw to timbr frame work in wall as specified and directed

S& F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters complete all as specified and as directed.

Taking down existing cabinets and supply and fixing kitchen cabinet/Cupboard shutter made of HD HMR board 18 mm thick water proof with life time warranty for anti-termite. Cabinets shall be duly edge banded with PVC taping 0.8 mm thick, cut to shape & size of shelves complete all as specified and directed Make : Action tesa/ Kitply/ Archidlan

Supply and fix stainless steel auto closing hydraulic hinges fixed with self-tapping screw as in position required and complete all as specified and directed Make: Godrej or technocommercially equivalent in specified makes.

Supply and fix stainless steel modular handle 4 inch fixed with self-tapping screw as in position required and complete all as specified and directed. Make: Godrej or techno commercially equivalen tin specified makes

Supply and fix magnetic catcher of size 20mmx50mm suitable for cup board shutter complete all as specified and as directed.

Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone,concrete wall and slabs complete all as specified and as directed.

Supply & fix GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and as directed.

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down existing GI tubing complete all as specified and as directed.

S&F in repairs Vitrous china wash basin, size 555x410x205mm, wall hung Basin with full pedestal and fixing accessories complete all as specified and directed. Make Essco by Jaquar (Cat No-ECS-WHT-801, ECS-WHT- 301) or equivalent complete all a specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste chain and plug and porcelain stopper but including brackets 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed.

S&F in repairs Single lever basin Mixer without Popup waste with 450mm long Braided Hoses all as specified and directed. Make : Essco by Jaquar (Cat No:APR-101011NB) or equivalent complete all a specified and directed.

S&F in repairs Bowl for Coupled WC with PP normal close slim seat cover, Hinges, Fixing accessories and accessories Set, size 395X680X770mm, P/s Trap-180mm/ 220mm (Essco by Jaquar Cat No AIS-WHT-101751NSN/AIS-WHT-101751NSN) and cistern with cistern fittings (Essco by Jaquar Cat No - AIS-WHT-101201) Essco by Jaquar or equivalent complete all a specified and directed.

S&F in repair vitreous China squatting pan, `Orissa' pattern, size 630 x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs 2 way bib cock with wall fange all as specified and directed Make : Essco by Jaquar (Cat No:APR-101041) or equivalent complete all a specified and directed.

S&F in Repairs Angular Stop Cock with wall Flange Make : Essco by Jaquar (APR-101053) or equivalent complete all a specified and directed.

S&F Hand shower (health Faucet) (ABS body) with 8mm dia, 1.2 Meter long Flexible tube & wall Hook all as specified and directed Make : Essco by Jaquar (Cat No ALE-ESS-593) or equivalent complete all a specified and directed.

S&F in repairs Wall mixer with provision for Overhead Shower with 115mm Long bend pipe on Upper Side, connecting Legs & wall Flanges complete all as specified and as directed. Make : Essco by Jaquar (Cat No:APR-101273) or equivalent.

S&F Towel ring square fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make Essco by Jaquar (AEC-1121) or equivalent.

S&F Single Towel Rail 600mm Long, Stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make Essco by Jaquar (AEC-1111) or equivalent.

S&F Towel Rack 600mm long with lower Hangers, Stainless Steel fixed to walls with chromium plated (CP) brass screwsall as specified an directed. Make Essco by Jaquar (AEC-1181) or equivalent.

S&F Glass Shelf 600mm long fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make Jaquar (ACN-CHR-1171N) or equivalent.

S&F Corner glass Shelf (with Bracket) fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make Jaquar (.ACN-CHR-1173) or equivalent.

S&F Soap dish (polycarbide) fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make Essco by Jaquar (AEC-1133) or equivalent.

S&F Toilet Paper holder fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make Jaquar (AEC-1151) or equivalent.

S & F in repairs sink cock with swinging Spout (wall mounted Model) with wall flange Make : Essco by Jaquar (Cat No:APR-103347N) or equivalent complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with pIngs including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size410mmx330mmx160mm all a s specified and directed.

S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, Fancy type, screwed down, screwed for iron pipe or for brass ferruleComplete all as specified and directed.

S&F in repair brass CP fancy type 15mm bore pillar tap all as specified and directed.

S&F in repairs 15mm dia brass C.P fancy Type stop valves. complete all as specified and as directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in Repairs 32mm Waste fittings, brass,chromium plated for glazedw are sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed

S&Fin repairs floor trap 110 mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed.

S & F in repairs 10 ltrc cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified.

Supply and fix in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. Make : Prayag Cat Part No 551 or techno commercially equivalent in specified makes

Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs and removing to stote complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 1000 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)of 500 litres capacity hoisted and fixed in position and including dismantling water tank and removing from site complete all as specified and as directed.

S&F in repairs 20mm bore ball brass valves. high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair 20mm dia gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed.

S&F Curtain rod with a telescoping brackets to fit both rod and mounting hardware modular type complete all as specified and directed.

M&L 75mm thick cement concrete type B-2, 1:2:4 (using 20 mm graded aggregate) , finished fair and even without using extra cement for plinth protection and similar work complete all as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed in floor/wall 75mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) junction double, (double T), equal or unequal of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) junction double, (double T), equal or unequal of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F for PVC (SWR) vent cowl suitable for 75mm dia PVC pipe. complete all as specified and as directed.

Excavation over area n.exc 1.5m deep and getting out in hard/dense soil. complete all as specified and as directed.

Demolition of 300mm dia cement concrete bed in haunching and breaking up drain pipes SGSW set in cement mortar of the following dia complete all as specified.

M&L for Reinforcement concrete pipes, class NP-2 laid and jointed complete with collars for 450 mm bore dia of pipe. complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm in soils. complete all as specified and as directed.

Removing excavated material exc. 250mtrs but n exc 500 mtr and depositing where directed at a level not exc. 1.50mtrs above the starting point.

M&L for precast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slabs etc set in cement mortar (1:4) including use and waste of form work & placing on drains complete directed

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia conforming to Fe-410-S or Fe-410-O complete all as specified and as directed.

All as per above but 8mm dia TMT bars complete all as specified and as directed.

Demolition and breaking up 200mm bore dia drain pipe (salt glazed ware, AC or reinforced cement concrete) set in CM. complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 as in concrete bed to drain pipes of 200mm bore including packing under and haunching against the sides of pipe after they are laid complete all as specified and as directed.

M&L for Reinforcement concrete pipes, class NP-2 laid and jointed complete with collars for 200 mm bore dia of pipe. complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel 91/1 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as orginal formation. complete all as specified and as directed.

Dismantling structural steel work including , doors, gates but excluding framed truss etc. complete all as specified and as directed.

M&L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete specified and directed.

M&L for preparation of new untreated surfaces of steel of any description exc 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide primer. complete all as specified and as directed.

M&L two coats of synthetic enamel painting over a coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified and as directed.

Material and labour for preparation of old painted wood /wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (1st quality) complete all as specified.

M & L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed

M & L for preparation of new surface of wall and applying two coats of oil bound distemper over a coat of birla white care putty complete all as specified and directed

M&L for Preparing new plastered surface and applying two coat weather shield paint (appex) over a coat of primer complete all as specified and directed.

S&F MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair all as specified and as directed.

Taking down point wiring with of any type of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/ buzzer, bell push, tube light fittings, regulators etc and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/ colour washing/ distemper to match with existing wall/ floor/ ceiling finishes complete all as specified and directed.

M&L for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxes sunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light / fan / bell point controlled by one, one way switch. Note:- Cost of 2.50 sqmm FRLSH cable provided from DB to respective switch board in rooms shall be included in the quoted rate.

All as per item No 134 above but one 3 pin 5 amp socket out point on the same board with other switches complete all as specified and directed.

All as per item No 134 above but with 2.5 sqmm wire for one 3 pin 5 amp socket out point on the independent board with other switches complete all as specified and directed.

All as per item No 134 above but one light point controlled by two, two way switches complete all as specified and directed.

As per item No 134 above but One bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item No 134 here in before but with cable size 4 Sq mm for one 5 pin 15/16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm all as specified and directed

Supply & Fix modular motor starter 20A , 2 module for AC (Green and Red buttons) complete all as specified and directed.

S&F for switch modular type single pole one way 6 amp 230/250 volts grade on top covers (Catered in point wiring) suitable for modular switch boxes complete all as specified and directed.

S&F for switch modular type two way 6 amp 230/250 volts grade on top covers (Catered in point wiring) suitable for modular switch boxes complete all as specified and directed.

S&F for switch modular type single pole one way 16 amp 230/250 volts grade with indicator on top covers (Catered in point wiring) suitable for modular switch boxes complete all as specified and directed.

S&F for socket outlet 3 pin 6 amp (with 2 pin outlet of 6 amp also) multipurpose use, no shuttering, non interlocking flush mounting modular type, 230/250 volts grade on top covers (catered in point wiring above) complete all as specified and directed.

S&F for socket outlet 6 pin 16 amp (with 3 pin outlet of 5 amp also) multipurpose use, no shuttering, non interlocking flush mounting modular type, 230/250 volts grade on top covers (catered in point wiring above) complete all as specified and directed.

Supply and fixing modular step type two module electronic fan regulator five step heavy duty 120 watts 240 volts. , complete all as specified and directed.

S&F for switch modular type bell push flush type, two module 6 amp 230/250 volts grade on top covers (Catered in point wiring) suitable for modular switch boxes complete all as specified and directed.

S&F electric bell multi music type AC 230 volts single pole for AC 230V, 50 Hz ding dong type complete all as specified and directed.

Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified and directed.

Supply and fixing LED tube lights fittings 20W, 220V, aluminium housing with driver, holder including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing Mirror lights fittings decorative type 10W, 220V, aluminium housing with driver, holder including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix LED Designer Home Decorative Wall lamp for Living Room/Decorative Light 10 watt for Indoor Application Without Bulb Wall Light (Corded Electric,Clear) complete all as specified and directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix lamp holder angular type PVC/Polycarbonate type with cord grip cap suitable for pendant fitting / wall including invetor LED bulb 9W LED lamp complete all as specified and directed.

Supplying, fixing Bulk head , luminaire 10 watt LED, internally prewired with and including premium quality diffuser for glarefree light and easy to install snap fit installer complete with all accessories, and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.50 Sqmm and fixing arrangements for fixing the light fitting complete all as specified & directed.

Supply and fix building security light LED 25 W with Lumen O/P 2000-2500 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m to 1.2m bent to shape including FI clamps nut bolts etc complete all as specified and directed.

M&L electrically disconnecting and taking down existing ceiling/Exhaust fan from any height or in any position from existing building and keeping in safe custody for reuse at site after necessary cleaning & painting with one coat of synthetic enamel paint and re- hanging/re-fixing in original position but including replacement of three core flexible copper conductor cable from ceiling rose to fan connector block of size 0.75 sqmm etc & testing for proper functioning complete all as specified and directed.

Supply and fixing of wall mounting fan 400 mm sweep, 230volts, AC, single phase complete with all fixing accessories all as per site requirement and as directed.

Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.

Supply and fix exhaust fan 250mm sweep, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding with nuts & bolts, washers etc, connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, complete all as specified and directed.

Supply, installation, testing and commissioning of commercial type wall mounted electric chimney made out of IS Certified, Suction Power : 1250m3/hr, Function Type : Auto clean, 6 way suction, Filter type : Baffle filter, Finish : Black Tampered Glass Control : Gesture & 3 Speed Touch Speed, Led : 2x 1.5W LED, Warranty : 5 years on product, 10 years on motor Product Dimension (WxDxH) (mm) : 600x425x595mm, including pipe and connected accesories for connection from outside to the chimney and hole for pipe by Core cutting or any mechanical means and making good to the disturbed surfaces complete all as specified and directed. Make : Glen/Faber/Hindware

Supply and fix in replacement electric water heater, storage type steel body with steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, connection pipe heavy duty, ISI marked-02 Nos, NRV, complete all as specified and directed.

Supply and fix sub Main wiring with two single core FRLSH PVC insulated unsheathed multistranded flexible copper conductor cable of size 4 Sqmm and one single core 4.0 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC Conduit not less than 20 mm dia including dismantling of old unsv submain wiring complete all as specified and directed.

Supply and fix sub Main wiring with four single core FRLSH PVC insulated unsheathed multistranded flexible copper conductor cable of size 10 Sqmm and one single core 10.0 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC Conduit not less than 20 mm dia including dismantling of old unsv submain wiring complete all as specified and directed.

Disconnecting and taking down old unserviceable distribution boards any size any type including MCB TPN/SPN/SP etc and making good the disturbed surfaces to the existing surfaces complete all as specified and directed.

Supply & fixing of sheet metal enclosure Vertical TPN DB 4 Way double door As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase with 2 Neutral bar, 2 earthbar and Cable ties for Cable manage-ment, fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for easy of installation, Prefitted masking sheet, Reversible Door for IP 54 DB's, alongwith 125 Amp MCCB as incomer complete all as specified and directed.

Supply and fixing MCB DB triple pole with neutral sheet metal enclosure double door type, 415 Volts AC, with appropriate size bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCBs and with enclo-sure blank plates for unused way suitable for 4 way ISI marked all as specified and directed.

Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with 200 amp rat-ed bus bar of suitable size plate and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCB and with enclo-sure blank plates for unused way suitable for 4 way ISI marked all as specified and directed.

Supply and fixing MCB TPN 63 Amp rating 415V, 10KA 'C' curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SP 6 to 32 Amp rating 240V, 10KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN 40-63 Amp rating 240V, 10KA 'C' curve and current carrying ca-pacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in hard soil and getting out for taking down/laying Pipe lines of any description and in any position including forming sides and bottom surface to required level/ gradients complete all as specified and directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr deep in soft soil and getting out for taking down/laying Pipe lines of any description and in any position including forming sides and bottom surface to required level/ gradients complete all as specified and directed.

Returning filling in,including spreading,leveling watering and well ramming in layers not exceeding 25 cms thick. complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 Mtr & depositing where directed at a level not exceeding 1.5 mtr above the starting point. complete all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings 50 mm (2”) dia. including Bends, increasing sockets/decreasing or double socket etc, complete all as specified and directed

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia. including Bends, increasing sockets/decreasing or double socket etc, complete all as specified and directed

Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm dia. including Bends, increasing sockets/decreasing or double socket etc, complete all as specified and directed

Supply and fix Stop valves of size 50mm (2"), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed

Supply and fix Stop valves of size 25mm (1"), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed

Supply and fix Stop valves of size 20mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed

Material and labour for PCC Type D2 ,1:3:6 by using ( 40 mm aggregatestone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, complete all as specified and directed.

Supply and fix Float valves of size 20mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed

Supply and fix Float valves of size 25mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed

Demolition of old valve pit chamber and M&L for Construction of valve pit chamber of size 1200 x 1200 x 1200 mm with 15 Cm thick PCC foundation in 1:4:8 type D2 ( using 40 mm graded stone aggregate) and 15 cm thick hard core, 20cm PCC solid block grade D - 5 masonary work built in CM (1:6), 15 mm thick internal & external plastering in CM (1:4), MS sheet cover 6 mm thick including 50 x 50 x 5 mm MS angle frame fixed in coping of PCC 1:2:4 type B-1 ( using 20 mm stone aggregate) making hole in valve chamber cover as per sluice valve location in side the valve chamber for insurtion of MS rod of 12 mm dia of 1.5m long along with valve spindle cap properly welded to ms rod with locking arrangement & painting with one coat of red oxide & two coats of black bituminous paint complete all as specified & directed including removing of extra soil from site complete all as specified and directed.

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 Core in trench/wall/pole, Complete all as specified and directed

Supply and fix Double wall corrugated High Density Polymer Ethyl(HDPE) pipe for laying of electric cable of size 50 mm outer diameter and 38 mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches(Including cutting of roads or any others hard surfaces and making good disturbed surfaces) , wall, poles including bends, sockets and other connected accessories complete all as specified and directed. Make : Ketron/tirupati.

Supply and fix GI tubing light grade 50mm (Including cutting of roads or any others hard surfaces and making good disturbed surfaces) , wall, poles including bends, sockets and other connected accessories complete all as specified and directed.

Material and labour for PCC Type D2 ,1:3:6 by using ( 40 mm aggregatestone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets andrailings upto 60 cm in height, copings, complete all as specified and directed.

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure.

M & L for Cutting out of hard standing,concrete blocks,slabs,brickwork or stone masonry (in alter nate course), forming tooth-ings for and bonding new work in mortar into old work, including new materials with complete and making good to the disturbed surface by using PCC of C1, 20 mm Grade 1:3:6 up to the depth for laying of water pipe line in soil complete all as specified and directed.

Supply, Installation, testing and commissioning of indoor type / wall mounted LT panel factory made, the panel shall be made of 3.15mm CRCA MS sheet and angle 50 x 50 x 6mm thick MS angle iron frame work, duly powder coated finish (including CPRI test certified) protection class IP 42, panel mounted on angle 50 x50 x5mm frame and wall mounted, powder coated finish on out side over a coat of red oxide primer and two coats of red oxide only on inside, front opening with 4 nos 200 amps rating insulated electrolytic colour code copper bus bars mounted on porcelain insulators and internal wiring with FRLS PVC insulated solid conductor cable of 6.0 sqmm cross section complete all as specified and directed and having the following:- Incoming:- (a) MCCB 125 amps, rating 415 volts, 4 pole, 25 KA (Ics = 100% icu) with adjustable thermal & magnetic release (80-100%) & earth fault protection - 01 Nos (b) Space for Digital tamper proof elect meter - 03 Nos Outgoing:- (a) MCB TPN 63 amps, 10KA - 02 Nos, (b) MCB SPN 6 AMp, 10 KA-01 Nos (c) R/Y/B Neon LED indicating lamp - 01 Set, (d) Digital Amp meter & voltmeter with set of CT and PT - 01 Nos

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 52,145.00]

M/S L M Chourasia (BID ID -3154537)

Rehal Construction (BID ID -3163373)

M/s Rahul Traders (BID ID -3163412)