SPECIAL REPAIR TO BLDG NO T 1195 T 1175 T 1165 OR LIVING LINE DO PART II CELL SUVIDHA CELL MODEL ROOM OFFICE COMPLEX AND OR BATHROOM BLDG NO TL 56 TL 57 TL 58 TL 59 AT HISAR MIL STN UNDER GE HISAR

Amount

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete

Taking down old rusted & damaged steel windows/ventilators of any description and of any type & size with guard bars / grill including cutting holes for hold fasts & making good the disturbed portion complete all as specified & as directed.

M&L for preparation of old painted steel or iron surfaces of any description and applying one coat of synthetic enamel paint over a coat of red oxide primer complete.

Supply and fixing Fiber Glass Reinforced plastic (FRP)Door Frames of cross section 90 mm x 45 mm havingsingle rebate of 32 mm x 15 mm to receive shutter of 30mm ness.The minte shall be moulded with fireresistant grade unsaturated polyester resin and choppedmat. Door frame laminate shall be 2mm thick and shallbe filled with uitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by he manufacturer and as per directions of Engineer-in-charge.

Supply and fixing to existing door frames 30 mm thickGlass Fibre Reinforced Plastic (FRP) panelled doorshutter of required colour and approved brand andmanufacture, made ire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of easoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm (SIngle rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing factory made single extruded WPC (wood polymer composite ) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade ),calcium carbonate and natural fibres (wood powder/rice husk /wheat husk )and toxic additives (maximum toxicity index of 12 for 100gms ) having miniumum density of 650 kg/cum and screw withdrawl strength of 1800N (face) & 900N (Edge ), miniumum compressive strength 50N/mm2,modulus of elasticity 850 N/mm2 and resisitance to spread of flame of class A category with property of being termite / borer proof ,water/moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws all as per direction of Engineer -In-Charge (Note : stainless steel butt hinges and necessary SS screws be paid separately)

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (withsash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as directed.

S&F cast brass butt hinges of size 100mm , mild steel hinge pin ISI marked complete all as specified

Supply & fixing aluminium handle 150mm size cast type, anodized complete all as specified.

S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified.

S&F anodized aluminium frame for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note : (i) Glass panes and wire cloth shall be measured & paid separately (ii) Rubber beading will not be weighed and not to be paid seperately.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified & as directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point etc complete all as specified and directe.

M&L for providing cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concreting complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

S&F Door closer aluminium (extruded section body), hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 701mm to 850mm in width and of weight between 36 to 60 kg and fixed complete all as specified & as directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified and directed.

Supply and fixing 4.00mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified.

Supply and fixing 5.50mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified.

S&F 4 mm thick figured glass fixed with and including necessary rubber gasket and aluminium beading all as directed

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified.

Dismantling AC sheet (Corrugated, Semi corrugated etc) as in roofs etc complete all as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or ‘L’ type or ‘J’ type or cranked hooks bolts complete all as specified & directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets complete all as specified

S&F, GI powder caoted snap grid of sizes 605 mm x 605 mm frame work for false ceiling with main tee 32x24x1mm thick, cross tee 26x24x1mm thick and wall angle 24x24x1mm thick, flange covered with PVC thin sheet including gypsum board 7-9 mm thick, duly finished surface (thin PVC layer on gypsum board as per manufacturer instructions) size 600mm x 600mm and the same to be placed in snap grid as in false ceiling and Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 including demolition of old brickwork all as specified and directed

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M & L for rendering 10mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified.

M & L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces of walls, finished even and fair complete all as specified.

M&L for rough cast finish plaster by applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete .

M & L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of Chalk whiting complete all as specified and as directed by Engr-In-Charge.

M& L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over one coat of white wash complete all as specified and directed

M&L for preparing new plastered or unplastered surface of walls and finishing walls with Acrylic smooth exterior paint of required shade. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm of same make complete all as specifeid and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specifeid and directed.

Demolition of stone slab and tiles of any description or thickness in floors, apron etc laid bedded and pointed in any mortor etc complete all as specified and directed.

S&F Coloured non skid ceramic (digital)tiles 7 to 8 mm thick (square/rec)area of each tiles exc .11 sqm and nxc .18sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match.incl 15mm th cement screed bed in CM 1:6

M&L for machine cut Kota stone slab flooring 18 to 20mm thick laid over & including screed bed or bedding layer of 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified. Note : (i) Kota stone shall be of size 550mm x 550mm (minimum) when brought at site. (ii) Single piece tiles will be placed on the surface of stair case tread area).

M&L for Glazed ceramic tiles in vertical surface 450X 350X 7mm thickset and jointed in neatcement slurry and pointedin white or colour cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces all as specified

S&F superior quality SS Curtain rod, 20mm dia with and including SS bracket 2 Nos of each opening and fency type SS side knob of required shape and size 2 Nos of each opening as approved by Engr- in charge and complete all as specified and directed.

M&L for dark shade Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 as in floors complete all as specified and as directed by Engr-in-Charge

Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced).

M&L 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub base ,floors etc

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed,

Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment with 20mm thick screed bed or bedding layer in CM 1:6 in floors

M& L for 75 mm thick PCC flooring 1:4:8 Type D-2 (using 40mm graded crushed stone aggregate)/brick coarse aggregate as in / subbase of floor finishes complete all as specified and as directed by the Engineer-in-charge.

M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.in patchwork n exc 3.00 sqm each patch

M&L for parking tiles 10-12 mm thick not exc 0.16 sqm, jointed and pointed in neat cement slurry in floors with grey cement and no pigment complete all as specified and directed by EIC.

S&F inrepairs factory made precast reinforced cement concerte ferrow (SFRC) manhole cover of size 1200x6000mmx60mm thick duty duty HD-20 grade conforming to IS 12592 complete all as specified and directed.

Taking up or down carefully 20 mm bore steel tubing and connections including cleaning for refixing or removal to store os size.

Taking up or down carefully 15 mm bore steel tubing and connections including cleaning for refixing or removal to store os size.

S&F 15 mm bore GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc.

S&F 20 mm bore GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc.

S&F PVC (SWR) 75 mm dia of outlet nahani trap/floor trap with grating including jointing with solvent cement

S &F salt glazed stone ware gully traps squre of size 150 x 150 mm including setting & jointing to drains in CM (1 ; 2) including eartwork, concrete in beds, surrounds, kerbs ettc and CI grating etc complete fixed in repairs, all as directed by Engr - In- Charge.

S&F 75 mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 110 mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

Supply and fixing 75 mm bore PVC (SWR) bends any radius with access door complete all as specified.

Supply and fixing 110 mm bore PVC (SWR) bends any radius with access door complete all as specified.

S&F 110mm dia PVC (SWR) junction single (Single Tee ) equal or unequal

S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed including taking out old one.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured , including fixing bolts etc including PVC seat cover white flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks (colour other than black as approved by Engineer-in-charge) triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F Towel Rail 600mm long of PTMT fixed withand including Chromium plated brassscrews and wooden/plastic cleats.(Minimum weight 190gms)

S&F gun metal globe or gate valves with iron wheel head, screwed boh ends for iron pipe and fixed of 20mm dia on stone, concrete, block, slab or wall in repairs of ISI marked

S&F in repairs 15 mm dia chromium plated fancy type angle cock with wall flange consealed type of equivalent make specified here in after complete all as specified and directed.

S&F Waste coupling of PTMT(half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms)®

S&F PVC waste pipe 32 mm dia for urinal or wash basin etc complete

S&F Bib taps, castcopper alloy withcrutch or butterflyhandle, screweddown, screwed foriron pipe or forbrass ferrule andfixed

Supply and fix in repairs shower rose chromium plated brass fancy type 125x125 mm with or without swivel any size, including fixing to steel pipe or union, complete all as specified and as directed by Engr-in-Charge.

S&F in repairs 10 Itrs PVC (White) valve less cyphonic action type, flushing cistern low level with inlet ball valve float, handle. aluminium brackets for bottom support fixing with gutties embeded in wall with drilling machine etc complete all as specified and as directed by Engr-in-Charge.Make -Prayag-501 or Equavalent aprroved by GE [Make-Cera/HISL(Sleek)/Parryware(Slimline)]

S&F in repairs chromium plated Jet Spray for WC with 100 cm long PVC pipe including neccessary Gl fitting as required like toe, nipple etc all as specified and directed

S&F in reapir Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge.

S&F 15 MM bore P-R Ball valves (brass insert) as per requirement of the site complete all as specified and as directed by Engineer-in-Charge

S&F Hollow PVC Wall Lining consisting of 5mm thick wood grained printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-charge

S & F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cemnt all as specified and directed by Engr-in-Charge

S&F in repair stop valves concealed type chrome plated fancy type 15mm borer, cast copper alloy screwed down high presswure, with crutch of butterfly handle, screwed both ends for iroon pipe or for unions all as specified and directed by Engr-in-Charge

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks, DB, MCB etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20/25mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including modular sunk type pressed steel box with & including modular cover plate and frame for housing switches, sockets, regulator, etc’, complete, all as specified & directed. . (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

All as per item No 88.00 (here-in-before) but ceiling fan /exhaust fan point controlled by one Number one way switch.

All as per item No. 88.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board.

All as per item No. 88.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.

All as per srl item No. 88.00 (here-in-before) but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi stranded on independent board including provn of 2.50 Sqmm unsheathed, multistranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix modular type switch single pole 1 way 16Amp 230 Volts

Supply and fix modular type switch one way 5/6 Amp 230 Volts

S&F modular type socket outlet multipurpose 3 Pin 5/6 Amp (with 2 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.

S&F modular type socket outlet multipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed

S&F modular type Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1500 mm ceiling fan etc complete all as specified and directed

S&F in replacement LED lights fitting 1x 40W, 240V, 50HZregal batten for LED incl ultra bright glass LED tube light aluminium housing with very high efficiency, singel / double side connection complete all as specified and directed.

S&F in replacement street light LED light fitting 20 Watt, 240V, 50HZ pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 25mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps 240 Volts , 'C' curve, 10 KA, IS-8828 marked fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DBcomplete all as specified and directed.

S & F repair MCB SPN, 40-63 Amps 240 Volts , 'C' curve, 10 KA, complete all as specified and directed. Note :-Make of MCB shall be same of that DB.

S&F in replacement sheet metal enclosure distribution board SP&N, 8 way, double door, powder coated, protection class IP-42, suitable for mounting MCB, DBs confirming to IS-13032, IS-8632, BS-5484 with min 200 Amp rating copper bus bar, complete all as specified & directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground leve with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-1) including taking out old existing earthing complete all as directed.

Supply and fixing ceiling fans (Copper winding) complete with blades, down rods and accessories, 230V 1200mm sweep, min air delivery 210 CFM, BEE five star rated with brushless direct current motor(BLDC) with remote complete all as specified and directed

S&F in replacement LED lumianire 600mm x 600mm, capacity 35/36 Watt, 220 V AC, recessed type with high efficiency PMMA diffuser soft glase free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flrxible copper conductor of suitable size complete all as specified and directed. Make : Surya Cat Part No SLE FP 36 R22 or Cat Part No VENUSNEOHE2X2R36WLED840PIRSENSOR of Havells or Cat Part No LTCRP36WLED2X2 of C&S or equivalent of makes as mentioned in Appx 'C' list of makes

Supply , laying , jointing, testing and commissioning of size 10 sqmm 2 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified. Note : (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. (ii) Cable may be laid in trenches under road, across the nallah, along poles/walls and in ducts etc complete all as specified and directed by Engr-in- Charge.

Excavation in trenches in soft/loose soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified

Supply , laying , double wall corrugated pipe (DWC) conforming to IS 19430 Part - I of size 50mm outer dia and 38mm inner dia complete all as specified and directed.

Supply & fixing and testing exhaust fan of 450mm sweep heavy duty, double ball bearing, 900 RPM, suitable for 230 volt, 50 Hz AC supply complete with louver shutter including fixing / grouting of frame in wall & cutting opening complete with covers & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan complete all as specified and directed by Engr-in-Charge.

Supply & fixing electric water heater, storage type mild steel body with glass lined coating (Outer body) with titanium armour technology inner tank coating for preventing corrison rusting and heating element upto 2KW cap 25ltr, BEE 3star rated complete with all accessories such as safety vlve, thermostate , NRV, connection piece etc complete & directed.

S&F in replacement sheet metal enclosure double pole and neutral with a two pin and earth plug and socket complete with and including one 20 Amp SPN MCB 'C' curve complete all as specified.

S&F in repair Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 1.5 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 1.5 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable submain wiring. Note:- (i)Two lengths of 4 Sqmm cable, one length of 1.5 Sqmm cable and one length of PVC conduit will be measured as one length. (ii) Cost of taking down existing submain wiring including all accessories is included in this item and nothing will be paid extra on this account

malik constructions (BID ID -3389099)

m/s krishna engineers1 (BID ID -3388982)

Balaji Construction Co. (BID ID -3389832)

SHRI HARI BUILDERS (BID ID -3388844)

virendra constructions (BID ID -3397411)

VIKAS INFRASTRUCTURE (BID ID -3397706)