Providing, Installation, Testing and Commissioning of Submersible Pump Sets at Various Dug Well

Amount

Providing, Installation, testing and commisioning of machinery/ equipments at Various stations of PHE Mech. Sub. Div. Samba-1 under Machinery and Equipment

1) Providing, Installation, testing and commissiong of sub. Pump sets of parameter 5000GPH*150mtr head of any reputed make at D/W Amli by way of providing and instalation of above said sub. pump set. Extraction of damaged pump set with column pipe with the help of manual labour and chain pulley set. Replacing the damaged sub. cable 20mtrs with providing and fitting new sub. cable. Fabrication of nipple out of G I pipe of which Bottom end is reduced to delivery size of pump and threading the pipe for screwing into the delivery portion of pump and other end is welded with M S flange as per the size of flange of column pipe. Fabrication of tie rod clamping assembly out of M S flate for clamping the pump and motor with column pipes. Filling the moter with distilled water, assembling the pump moter assy. and testing at zero load. shifting the assy. to site and making all electrical connection, lowering the pump set along with column pipes and sub. cable. testing the pump set at full load Complete job including cost of material and labour charges at site. 2) Providing, Installation, testing and commissiong of sub. Pump sets of parameter 3000GPH*100mtr head of any reputed make at T/W Simblna by way of providing and instalation of above said sub. pump set. Extraction of damaged pump set with column pipe with the help of manual labour and chain pulley set. Replacing the damaged sub. cable 60mtrs with providing and fitting new sub. cable. Fabrication of nipple out of G I pipe of which Bottom end is reduced to delivery size of pump and threading the pipe for screwing into the delivery portion of pump and other end is welded with M S flange as per the size of flange of column pipe. Fabrication of tie rod clamping assembly out of M S flate for clamping the pump and motor with column pipes. Filling the moter with distilled water, assembling the pump moter assy. and testing at zero load. shifting the assy. to site and making all electrical connection, lowering the pump set along with column pipes and sub. cable. testing the pump set at full load Complete job including cost of material and labour charges at site. 3) Replacement of 50 HP star delta oil immersed starter at station D/W Bhorna, 40 HP star delta oil impresed starter at D/W Taloor, 50 HP star delta oil immersed starter at station D/W Chal and 50 HP star delta oil immersed starter at station P/Stn Bein by way of disconnecting all electrical connections replacement of damage starter by providing and fitting new starters and topping up of T.oil in the starter dush pot up to required level making necessary electrical connections, testing the job on full load. Complete job including cost and carriage of material to site and labour charges. 4)Replacement of damaged 100 AMP main switch installed at station dug well Chal and 200AMP main switch at P/Stn. Bein. Job includes disconnecting the LT cable from main switch after cutting off the fuses. Removing the main switch from the panel board, providing and fitting of new main switches along with 03 Nos. HRC fuses, making necessary electrical connections complete job including cost and carriage of material to site and labour charges.

Vaibhav Engineers and Technocrates

R M ENTERPRISES