Constt. of library building near pond at mearth

Amount

Earthwork in excavation in trenches for foundations [not exceeding1.5m in width] and not exceeding 10sqm on plan including dressing of sides and ramming of bottoms lift up to 1.5m, includind getting out excavated earth as directed (all kinds of soils)

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:5:10(1 cement:5 coarse sand:10 garded stone 40 mm nominal size) incl. c/o carriages.

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:3:6(1 cement:3 coarse sand:6 garded stone 20 mm nominal size ] incl. c/o carriages

Providing and laying in position reinforce cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:1.5:3(1 cement: 1.5coarse sand:3 garded stone 20 mm nominal size ] in column, plinth beams. incl. c/o carriages

Brick work witk common burnt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth inclluding curing in cement mortar 1:6(1 cement: 6 coarse sand) incl. c/o carriages

Extra for brick work withj commom burnt clay bricks / cememt concrete bricks in super structure above plinth level up to floor five level

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4(1cement:2coarse sand:4 graded stone agg. 12.5mm nominal size) and curing complete. Incl. c/o carriages

Steel reinforcement for RCC work including starighting, cutting, bending , placing in position and binding all complete(TMT steel)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone agg.) 20 mm nominal size over 75 mm bed of dry brick blast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Filling available exacvated earth ( excluding rock) in trenches , plinth, sides of foundation etc not exceeding 20 cm in depth , consloidation each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5 m

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigmentsetc. complete Size of tile 600x600 mm

12 mm cement plaster of mix1:4(1 cement :4 coarse sand)

15 mm cement plaster 1:4(1 cement:4 coarse sand)

6 mm cement plaster of mix1:3(1 cement :3 coarse sand)

Centring and shuttermg including strutting, propping etc. and removal of formwork for·

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs , landing , balconies and access platfarm

walls(any thickness)

Lintel, Beams, plinth beams girders, bressumers and cantiliver

Edges of slab below 20 mm size

Providing wood work in frame of doors, windows,clerestory windows and other frames rot framed and fixed in position with hold fast lugsare with dash fasteners of required dia and length ( hold fast lugs are dash fastener shall be paid for seperately)

Sal Wood

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled M.S. but hinges with necessary screws excluding, panelling which will be paid for separately. Second class deodar wood.

12 mm thick plain grade-I, medium density flat pressed three layerparticle board FPT-I

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass pane including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class deodar wood 35 mm

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood 35 mm

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class deodar wood 50x12mm

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts andscrews etc. complete : 250x16 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with necessary screws etc. complete : 300x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coatingnot less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Single rubber stopper

Providing and fixing bright finished brass hard drawn hooks and eyes 200mm

Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Panting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats) on new work. (Asian/Nerolac)

Distempering with oil bound distemper of approved brand and manufacturer (two or more coats) on new work including priming coat of cement primer. (Asian/Nerolac)

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diametre

un-plasticized -PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for light/power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 *4 sqm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16A modular switch, connections etc as required

supply and fixing two module stepped type electronic fan regulator on the existing modular plate required. Switch box including connections but excluding modular plate etc

supply and fixinng modular blanking plate on the existing modular plate & switchbox excludingmodular plate as required

providing and fixing M.V danger notice plate of 200mm*150mm made of mild steel, at least 2 mm thick in single red color on front side as required

supply and fixing 25 mm square core aluminium cables as required

supply of LED batten 18W

Ceiling Fan 1200 mm Sweep along with fan rod and fan regulater complete

sign board

KAMAL BHARDWAJ

VIKAS SHARMA

AJAY KUMAR