Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹6.2 L
Closing Date
5 Jan 2024, 8:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
krishna Reddy G T
Establishing 1x10MVA, 110/11kV substation at Chikkarugi and construction of 110kV LILO Line from 110kV Indi-Devarahipparagi line to the proposed 110kV sub-station at Chikkarugi for a distance of 0.899km in Sindagi taluk, Vijayapura district on Partial Turnkey basis including Supply of all matching Materials/ Equipments(excluding supply of 10MVA Transformer and 11KV Switchgear) and Erection (Including Civil Works) of all Materials/ Equipment, Testing and Commissioning.
KPTCL/2023-24/SS/WORK_INDENT384
KPTCL/2023-24/SS/WORK_INDENT384
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Corporate Office Tendering and Procurement Bengaluru
4 documents required · 4 mandatory
Documentary proof for clause no.3.2 (b)(ii) of ITT Tenderer such as P.O, LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer.self-Declaration stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct as per the clause no.3.6 of ITT and at clause No.1.5 of Section-3-QI
Documentary proof for clause no.3.2 (b)(i) of ITT Tenderer such as P.O, LOI/LOA, DWA, Work done, Performance Certificates issued by the end users not below the rank of Executive/ Divisional Engineer
Documentary proof for clause no.3.6 of ITT : Assessed available tender capacity such as, Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years,Value of existing commitments and on-going works as well as the stipulated period of completion, remaining for each of the works should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent OR be verified and certified by Chartered Accountant/ Cost Auditor and self declar. as in Note of the clause 3.6 of ITT in the presc.format as in clause No: 1.5 of QI.Value of existing commitments and on going works as well as the stipu. period of comp, remaining for each of the works signed by the Employer in charge
Valid Super grade Electrical Contractors License issued by the Government of Karnataka as on the date of bid submission as per clause no.2.3 of ITT, failing which the offer is liable to be rejected.
Audited Financial statements i.e Balance sheets, P&L statements, Turnover certificates and Auditors Reports of the last five years preceding the date of bid submission of the Bidder duly certified by chartered Accountant as in clause no.3.2 (a) of ITT
Bankers Certificate duly signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT (Liquid Assets and /or availability of credit facilities).
GST registration, PAN etc., of the Tenderer as per clause no.3.10 (xii) of ITT .
The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets.
The Tenderer shall upload declarations for Deviations, if any as per Schedule-5 and Schedule-6 of the Techno Commercial sheets.
Constitution or legal status, Place of Registration(upload copy) and Principal place of business of the Bidder written Power of Attorney to the Signatory of the Bid to commit the Bidder to the Contract along with the resolution passed in this regard by the Board of Directors / all the Partners of the Firm
Information on litigations in which the Tenderer is involved as per prescribed format as at 1.12 of Qualification Information.
undertaking to source the supply of equipment/material from KPTCL approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https//kptcl.karnataka.gov.in, Link Tendering & Procurement application for Vendor registration etc as per Annexure -XIV of Section-4.
Certificate is to be uploaded by the Tenderer agreeing to source the equipment/ material for the work from the Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India as per Annexure XVI and XVII of Section-4
The Tenderer shall upload Type test reports as per tender documents/technical specifications
All details as called for in the Technical specifications of all the equipments/ materials of the Tender
The Qualification and experience of key Personnel proposed for carrying out the Work and Description of the Tools & Plant available with them for execution of the Work.
No Deviation Certificate as per Annexure-I of Section-4.
proposed methodology and program of construction backed with equipment planning and deployment, duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion as per approved Activity chart as per clause No.1.13 of Section-3-Qualification Information.
Any other required documents as per the qualifying requirements terms and conditions of the tender NIT and Technical specifications
Please note that the Filled in Techno commercial sheet shall be uploaded along with all other QR documents. Offers shall be quoted in the item-wise bid Financial offer, provisioned in the e-procurement portal. In case the Prices are uploaded in/along the Techno commercial Bid, then Bid will be summarily rejected. The Techno-commercial sheets shall be uploaded in KPTCL excel formats only.
₹5,000
₹6.2 L
27 Dec 2023
27 Dec 2023
6 Jan 2024
27 Dec 2023
Substation Supply Template
Supply and fixing of 2 Nos. of 50 X 8 mm copper flats from Neutral Terminal to the Earthmat through NCT along with necessary Support Pin Insulators.
Supply, Erection & Commissioning of Nitrogen Injection Fire Extinguishing System for Power Transformer
Circuit Breaker:SF6 Gas circuit breaker with Semi-Pneumatic /Pneumatic operated/Spring type operating mechanism, including mounting arrangements, rigid bi-metallic terminal connector complete suitabl...
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators: as per KPTCL Technical specifi...
b) Upright mounting type without earth switch with live point height 4600 mm
B)11KV Isolators:i) 11 kV isolator, double break 1250 A,25 KA capacity with rigid bi-metallic terminal connector suitable for AAAC Moose for incomer.
ii)11KV isolators, Double Break 400A,25KA capacity with rigid bi-metallic terminal connectors suitable for Coyote ACSR.
iii)11KV isolators, Single break 400A, 25KA capacity with Roster switch with rigid bi-metallic terminal connectors suitable for Coyote ACSR.
Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR. i) 110 KV Class, 31.5 KA...
ii)110 KV Class, 31.5 KA, CT of ratio 200-100/1-1-1A for Transformers.
For metering: Accuracy class- 0.2s, Burden 10VA For back up protection : Accuracy class - 5P20, Burden 30VA For differential/ d...
iii) 11 KV Class, 25KA,NCT of ratio 1200-800/1-1A for REFR Protection. (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 50x8mm Copper ...
Voltage Transformer 110kV, Single Phase, Oil filled outdoor type including marshalling box with rigid bimetallic terminal connectors
suitable for drake ACSR as per technical specification. Ratio : 1...
Lightning Arrestor : Surge arrestors (Porcelain housing) Metal Oxide Gap less type as per technical specification with suitable rigid bi-metallic terminal connectors suitable for Drake ACSR.i)96 KV,1...
9 KV, 10KA Station Class with connector and clamps
Capacitor Bank : Design, Engineering , supply, erection, testing & commissioning of 2.9 MVAR,12.1KV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors, with suitable ...
Control Panels:Simplex Type Control and Relay Panel complete as per specifications (Control Voltage 110 V DC). (SCADA compatible) NOTE :
1) All the C&R panels and associated panels shall be of one and...
b) For 110 KV Transmission line.
B) 11 KV ODS and take off structure i) Columns out of 9.0 mtrs long RCC pole of 300Kgs working load (using TOR steel) for 11 KV ODS.
ii) Supplying of D.P. Structure with all accessories using 9.0mtrs long, 145Kg WL RCC poles including H frame suitable for mounting roaster GOS / DB GOS with provision for fixing 9KV lightning arresto...
BUS BAR FORMATION:Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the conductor / Earth wire etc.
BUS BAR FORMATION:Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the conductor / Earth wire etc. b) AAAC Moose
BUS BAR FORMATION:Note: The scope also includes installing insulator strings complete with necessary Hardwares and stringing of the conductor / Earth wire etc. c) Coyote ACSR
Insulators :i) Post insulators solid core 110 KV Class 1Unit/Stack
Disc insulators (i) 11kV,90KN Disc insulators
HARDWARES:Bolted type Tension clamp to suit Drake ACSR-90kN (110 kV Side)
2. Bolted type Tension clamp to suit AAAC Moose - 90kN ( on LV side of Transformer road crossing)
3. Bolted type Tension clamp to suit Coyote ACSR - 90kN (11 kV Side).
4. Bolted type Suspension clamp to suit Drake ACSR - 90KN (110kV side)
5.Bolted type Suspension clamp to suit AAAC Moose- 90KN (11kV side)
Hardwares : C Type Wedge Connector suitable for Drake - Drake ACSR Conductor (110kV Bus PI & 11kV incomer)
C type wedge connector suitable for AAAC Moose-AAAC Moose
C type wedge connector suitable for Lynx-Drake ( 110 kV line side)
C type wedge connector suitable for Coyote-Coyote
C type wedge connector suitable for AAAC Moose-Coyote
Post Insulator clamp suitable for Single Drake ACSR and 110 kV Solid Core Insulator
Auxiliary Transformer:Station Auxiliary Transformer with oil, outdoor type,100 kVA,11 kV/433 V, 3 Ph,Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5%, as per specificat...
Supply of Double pole structure with 9 Mtrs RCC poles and with 11KV, 400A double break isolators, H-Frame and 9KV, 5KA surge arrestors (3 Nos), auxiliary transformer including materials such as DPse...
LTAC panel (indoor): 415V, as per technical specification comprising of Voltmeter, Ammeter, & 1No. ETV meter. 1No, I/C MCCB 200A+2Nos .3 phase 63A OG HRC fuse+ 2nos. 3 phase 32A OG HRC fuse+ 6Nos. 3 p...
B) A.C. Distribution Box (Outdoor):AC distribution box single front type, 6 terminals, 1200x1350x300 mm, 1 I/C of 100A, MCCB 20KA + 6 O/G MCB 16A + 1 O/G of 100A , HRC fuse
LT Power armoured UG cable as per specification.a) 1.1 KV, 4 X 95 Sqmm Aluminium, cable with glands/lugs/ferrules
b) 1.1 KV, 4 X 25 Sqmm Copper, cable with glands/lugs/ferrules
c) 1.1 KV, 4 X 10 Sqmm Copper, cable with glands/lugs/ferrules
Station Battery:110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) consists of 55 Nos. of cells with accessories as per specification.
Station Battery charger: Battery charger suitable for 110V, 200AH, Battery set (Plante/Grid/Nickel Cadmium Type) consisting of 55 No. cells with Float Cum Booster type battery charger as per specifica...
DC Distribution Panel (Indoor type) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No. 100A SFU for IC + 12 Nos., 32A SFU for OG etc., co...
Copper Control Cables:1.1kV PVC insulated Copper Control Cable with Lugs/Ferrules as per technical specifications.i) 19 C x 2.5 Sqmm
ii) 4 C x 6.0 Sqmm
iii) 4 C x 2.5 Sqmm
iv) 2 C x 2.5 Sqmm
v) 2 C x 6.0 Sqmm
Fire fighting equipment with necessary mounting stands. a) Foam type extinguisher (Mechanical type): i)50.0 litres capacity
ii) 9.0 litres capacity
b) Water type (Gas pressure type)-9.0 litres capacity
c) Carbondioxide type - 4.5 Kg capacity
d) Sand type i) G.I. Bucket 15 litres capacity
ii) Steel stands for the above to have 4 Buckets to each stand.
Equipment required for establishing SCADA Communication as per KPTCL specificationNote: 1. Satellite communication required will be arranged by SLDC2. The detailed BOM & specification of SCADA equipme...
b) Data Concentrator Unit (DCU)
c) 2kVA online UPS (230V AC 1Phase 50Hz)
Supply of following Power cables for SCADA. i) Current Cables - copper core with c/s 4.0sqmm multistrand 4 core
ii) Voltage Cables-Copper core with c/s 2.5sqmm multistrand 4core
iii) Signal cables- armoured copper core with c/s 0.5sqmm multistrand 10core
iv) Control cables - copper core with c/s 1.5sqmm multistrand 10core
v) Control cables-copper core with c/s 4.0sqmm multistrand 3core for AC input to UPS & UPS to RTU, confirming to KPTCL specifications.
vi) Control cables-copper core with c/s 32.0sqmm multistrand for Battery conforming to KPTCL specifications.
Maintenance Tools and Plants 1) Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)
2)Telescopic ladder Aluminium 6 Mtr. Height
3) Ring spanner set
4) Tube spanner set
5) Pipe wrench 24 inch
6)Pipe wrench 18 inch.
7) Hydraulic crimping tools up to 1000 Sq.mm
8) Rubber hand gloves (15 kV tested)
9)Rechargeable 5W LED hand torch
10)Hand torch 3 Cells
11)Insulated cutting plier 12 inch size
12)Insulated cutting plier 8 inch size
13) Line live tester AC/DC 500 V
14) Screw driver 18 inch
15) Screw driver 12 inch
16) Hammer 8 lbs
17) Hammer 2 lbs
18) Chain pulley block 5 ton capacity
19) Hydraulic jack 5T capacity
20) Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. Height
22) Box spanners
23) Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.
24) Insulation megger 2.5 - 5 kV
25) Insulation megger 500 V
26) SF-6 gas leak Detector
27) Multimeter electromechanical
28) Multimeter Electronic
30) DC Voltmeter range -5V to + 5V
31) Hydrometer syring suitable for vent holes
32) Specific gravity correction chart
33) Thermometer with wall mounting holder
34) Rubber appron
36) Protective goggle
37) Acid resisting jars (4 pint capacity)
38) Rubber shoes knee height
39) Glass funnel
40) Grounding sticks extendable upto 18ft-3 nos. of each 6ft sticks of 3 phase R,Y,B (3 nos. of 1 set)
41) Wall mounting type holder for hydrometer
Furniture for Control Room Staff and Maintenance Staff :
a) Steel Almirahs 6.5 feet
b) Steel Almirahs 6.5 feet with glass panel doors
c) Officers Tables
d) Steel Slotted Angle rack (big size)
f) Steel Slotted Angle rack (small size)
g) Steel Dust bins
h) Executive revolving chairs
i) S Type arm chairs
j) Steel folding chairs
Miscellaneous items: Miscellaneous items like rubber mats, first aid box, danger boards, shock treatment charts, water filter, door locks, fixograph, sub-station name board, and other sundry items (si...
Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English.
Water filter/ Water purifier: Wall mounting type (Aqua - guard type)
Sub-station name board duly painted as per specification including erection & Civil Works.
Supply and fixing of Fixograph of size 1.5m X 2.5m with English/ Kannada alphabets.
Door locks 7 levers (Navtal make)
Danger board ( prohibited ) with support structure including fixing in front of the gate
Equipments name plates and earthing name plates including fixing at outdoor yard
Station yard lighting (outdoor):Design of Station Yard illumination in Confirmity with the illumination levels mentioned in the Technical Specification of Station Yard illumination materials / equipme...
Line Supply Template
LINE SUPPLY PORTION Total weight of the Towers - Mild Steel (excluding Bolts & nuts) For detailed breakup refer Techno-commercial sheet.
Total weight of the Towers - High Tensile Steel (excluding Bolts & nuts) For detailed breakup refer Techno-commercial sheet.
Total weight of the Towers- Bolts, nuts & washers. For detailed breakup refer Techno-commercial sheet.
Tower Accessories:a)Anti Climbing Devices (Set) as per specification-For 110kV DC Towers
b) Number Plates (1 No. per tower)
c) Caution Plates (1 No. per tower)
d) Circuit Plates
e) Phase Plates (Set of 3 Nos.)
f) Grounding of towers including cost of 40 mm dia 2.5 mm thick, class C G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation ch...
Earth Bonds -(ii) 450mm long
Conductor:Lynx ACSR conductor
b. Groundwire ACSR conductor
INSULATOR STRINGS :110kV lines:
A. Tension insulator strings consisting of any one of the following: a. Insulator string consisting of 1X8nos. of 90kN Disc insulators Or b. Porcelain long rod insulato...
Insulator Hardwares suitable for LYNX ACSR Condyctor: i) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Single Tension String using 8Nos. 90KN EMS, Disc Insulators
ii) 110kV Clamps, Arcing Horns and Hardwares (Set) suitable for Double Tension String fittings using 2x8Nos. 90KN EMS, Disc Insulators
Accessories for ACSR Lynx conductor:a) Mid Span Compression Joint
c) Repair sleeves
e) Vibration dampers
Hardware & Accessories for Ground Wire:
a) Mid Span Compression joint
b) Repair sleeves
d) Single Tension clamps (Bolted type)
Station Erection Template
10 MVA, 110/11 KV, Delta/Star, Dyn11, 3 Ph, 50 Hz, Core type, 2 winding Delta/Star,
Vector Group: Dyn11, OLTC, RTCC Panel, first filling of oil and 10% spare oil, etc., complete with Terminal connecto...
Circuit Breaker :SF6 Gas circuit breaker with Semi-Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting arrangements, rigid bi-metallic terminal connector complete sui...
Isolators : Isolators including marshalling box and suitable terminal connectors, as required as per technical specification with solid core cylindrical post insulators: as per KPTCL Technical specifi...
B) 11KV Isolators:
i) 11 kV isolator, double break 1250 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for AAAC Moose for incomer.
ii) 11KV isolators, Double Break 400A, 25KA cap...
Current Transformer : Current Transformer including Marshalling box, Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR.
i) 110 KV Class, 31.5 K...
iii) 11 KV Class, 25KA,NCT of ratio 1200-800/1-1A for REFR Protection. (of similar rating and ratio as that of Incomer of 11kV Switchgear) with terminal connector suitable for 2 Nos. of 50x8mm Copper ...
Voltage Transformer:
a) Voltage Transformer 110kV, Single Phase, Oil filled outdoor type including marshalling box with rigid bimetallic terminal connectors suitable for drake ACSR as per technical ...
Lightning Arrestor:
Surge arrestors (Porcelain housing) Metal Oxide Gap less type as per technical specification with suitable rigid bi-metallic terminal connectors suitable for Drake ACSR.
ii) 9 KV, 10KA Station Class with connector and clamps
Control Panels :
Simplex Type Control and Relay Panel complete as per specifications (Control Voltage 110 V DC). (SCADA compatible)
1) All the C&R panels and associated panels shall be of one ...
Total Station & Mounting Structure MS weight
Total Bolt-Nut Weight for Station & Mounting Structures
i) Columns out of 9.0 mtrs long RCC pole of 300Kgs working load (using TOR steel) for 11 KV ODS.
iii) Erection of D.P. Structure with all accessories using 9.0mtrs long, 145Kg WL RCC poles including H frame suitable for mounting roaster GOS / DB GOS with provision for fixing 9KV lightning arresto...
Formation of Main/Cross bus with Single Drake /
Note: The scope also includes installing insulator strings complete with necessary hardwares and stringing of the conductor/earthwire etc.,
Formation of Main/Cross bus with single Coyote
Note: The scope also includes installing insulator strings complete with necessary hardwares and stringing of the conductor/earthwire etc.,
i) Post insulators solid core 110 KV Class
Auxiliary Transformer:
Station Auxiliary Transformer with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2.5%, as per specif...
Erection of Double pole structure with 9 Mtrs RCC poles and with 11KV, 400A double break isolators, H-Frame and 9KV, 5KA surge arrestors (3 Nos), auxiliary transformer including materials such as DP...
LTAC panel (indoor): 415 V as per technical
specification comprising of voltmeter and ammeter,
1 I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU,
+ 2 nos. 3 Phase 32A O/G SFU 100A + 14 O/G
SFU, 6 nos. 3 Ph...
B)AC Distribution Box Single front (Outdoor type)
6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G
MCB 16A + 1 O/G of 100A, HRC fuse, complete as
per technical specification.
LT Power armoured UG cable as per specification.a) 1.1 KV, 4 X 95 Sqmm Aluminium, cable with glands/lugs/ferrules b) 1.1 KV, 4 X 25 Sqmm Copper, cable with glands/lugs/ferrules c) 1.1 KV, 4 X 10 Sqmm ...
Station Battery:110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) consists of 55 Nos. of cells with accessories as per specification.
Station Battery charger: Battery charger suitable for 110V, 200AH, Battery set (Plante/Grid/Nickel Cadmium Type) consisting of 55 No. cells with Float Cum Booster type battery charger as per specifica...
DC Distribution Panel (Indoor) as per technical
specification comprising of earth fault indicator,
indication circuit for AC mains failure, 1 no. 100A
SFU for I/C + 12 nos. 32A SFU for O/G, complete
Copper Control Cables :1.1kV PVC insulated Copper Control Cable with Lugs/Ferrules as per technical specifications. i) 19 C x 2.5 Sqmm ii) 4 C x 6.0 Sqmm iii) 4 C x 2.5 Sqmm iv) 2 C x 2.5 Sqmm v) 2...
11KV Switchgear : 11kV, 350MVA, 800A Porcelain Clad VCB Switchgear (1250A for Incomer and 800A for feeders), outdoor type comprising of 1IC+6F+1CB+1AP (Remote Announciation cum Control panel) with CT...
Equipment required for establishing SCADA Communication as per KPTCL specification
Note: 1. Satellite communication required will be arranged by SLDC
2. The detailed BOM & specification of SCADA equip...
b) Data Concentrator Unit (DCU)
c) 2kVA online UPS (230V AC 1Phase 50Hz)
4)Integration of RTU,DCU and UPS with field equipments Note:Bidder has to quote only for erection charges
Laying of following Power cables for SCADA.i) Current Cables - copper core with c/s 4.0sqmm multistrand 4 coreii) Voltage Cables-Copper core with c/s 2.5sqmm multistrand 4core iii) Signal cables- armo...
Earth mat formation: Supplying, Laying and welding of M.S.Flats 50x6mm, applying ACB paint to welded portion as per approved drawing,/standard specification & consolidation and directions of engin...
b) Supplying and Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling o...
c) Supplying and Providing 25mm dia M.S.Rod 1.05m long earthmat spikes including heating, bending top 50mm overlap flattening and making spike edge at one end driving into the earth below the ground ...
d) Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6mm continuously welded around the pipe using cast iron welding el...
e) Supplying & providing 450 mm dia 450 mm height 1.5inch to 2inch thick hume pipe collar (nonpressure type) for earth pits including all lead and lifts etc.,
Line Erection Template
SURVEY : Check survey & tower spotting. for all types of terrain Check survey using their own equipment for Plain terrain. Note:As per Uni SR Vol-VI and Tender Documents.
Installing insulator strings complete with necessary Hardwares, Installing and stringing of ACSR Lynx conductor including fixing of conductor accessories etc., Note :- The tenderers are required to qu...
b) Installing and stringing of 7/3.15 mm earthwire including fixing of earth wire accessories and hardwares. Note :- The tenderers are required to quote the rates taking in to consideration the charge...
Erection of Towers including tack welding, fixing of tower accessories , Anti Climbing Devices, earthing & technical specifications (The weight includes the wt. of std., tower & stubs, including bol...
Releasing & restringing of Lynx ACSR conductor
Releasing & restringing of Ground wire
Station Mandatory Template
Circuit Breaker (CB)Closing coil with resistor (For one Complete Circuit Breaker)a)for 123KV CB
Tripping coil with resistor (For one omplete Circuit Breaker)for 123KV CB
Terminal Pad (For one Complete Circuit Breaker) for 123KV CB
Terminal Connector (For one Complete Circuit Breaker) for 123KV CB
SF6 Gas (40percent of total gas Qty. for Sub-Station at Chikkarugi)
Isolator : Copper Contract fingers male & female (For one Complete Isolator) a) for 123KV Class
Terminal Connector (For one Complete Isolator) a) for 123KV Class
Terminal Pad (For one Complete Isolator) a) for 123KV Class
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fencing with G.I. barbed wire R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and en...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour, curing as per ...
Supplying lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber ...
Supplying lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber ...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...
Providing and fixing PTMT pillar cock of approved quality and colour : 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete
25 mm nominal bore
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g.
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing & fixing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement: 4 coarse sand) mixed with 2% inte...
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming ...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of appr...
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in- charge: Polyester powder coated minimum thickness 50 micron aluminiu...
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. Powder coated minimum thickness 50 micron aluminium including cos...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or Lhooks, bolts and nuts 8mm. dia C.I plain and bitumen washers o...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.
Providing, supplying to work site Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, with testing of as per instructions of engi...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications...
SUBMERSIBLE CABLE
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...
PRESSURE GAUGE :
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm
Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
NON - RETURN VALVE :
Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No AnalogV...
POWER CAPACITOR :
Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissionin...
MCB : Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/1...
Supply and delivery at site 50mm(2”) dia heavy duty unplasticized PVC Column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof ...
Erection elctrification & Commissioning works of pumpsets :
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...
Ercerion of panel board & meter board Unit :
Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...
Main connections:
Supplying brand new PVC insulated steel/wire steel tape armoured UG cable with PVC outer sheting 1.1KV class confirming to IS-1554-1998 with amedenments with ISI Std. From KEB pole ...
Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal pro...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...
Point wiring using Copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Stepped Fan Regulator Two Module
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Tender document chikkarugi-2.zip
Tender Document • 15.23 MB
Chikkaraugi OM.pdf
Tender Document • 0.06 MB
Technical specification RTU_Revision1.pdf
Tender Document • 1.00 MB
Pre-Bid Proceedings.pdf
Tender Document • 0.67 MB
Revised Technocommercial sheets-chikkarugi.xls
Tender Document • 1.99 MB
Tender document chikkarugi-1.zip
Tender Document • 9.14 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .