ADDITION/ALTERATION TO EXISTING BOUNDARY WALL AND INTERNAL DRAIN AT DIFFERENT PLACES UNDER AGE B/R II OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Demolition of brick work or rubbled stone masonry including all quoins arches, pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in soft/loose soil complete all as specified.

Excavation over areas not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design Mix) using 20mm graded crushed stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete etc all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design Mix) using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete M-25 (Design Mix) using 20 mm graded crushed stone aggregate in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L Reinforced cement concrete M-25 (Design Mix) using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed.

Use & Waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rough finished surface of concrete complete all as specified and directed.

M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No. 16.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed.

All as per item No. 18.00 here-in-before but except bricks.

M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 with water proofing compund as per manufacurer's instructions, finished surfaces fair and smooth without using extra cement complete all as specified and directed. (Note: - WPC shall be measured and paid separately under relevent items of Sch 'A'/BoQ)

Supply only water proofing compound (Liquid) complete all as specified and as directed.

S&F mild steel angle iron Post and struts in fencing including cutting tops to shape as directed drilling holes for bolting and notching for wires, flat iron fillet (for securing wire mesh) including all necessary drilling, bolting & riveting etc complete, conforming to Fe-290-0 Gde E-165 complete all as specified and directed.

Fixing only mild steel angle iron Post and struts in fencing including cutting tops to shape as directed drilling holes for bolting and notching for wires, flat iron fillet (for securing wire mesh) including all necessary drilling, bolting & riveting etc complete, conforming to Fe-290-0 Gde E-165 complete all as specified and directed.

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed including formwork if required complete all as specified.

M&L for preparation ofold decorated surfaces of wall and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

S&F rust proof Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossingg with and provision of galvanised wire, stapples or steel pins etc complete all as specified and directed. (Each line of wire to be measured).

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F 75mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to walls as in weep holes complete all as specified.

Supply only Boulders 7cm to 15cm dia complete all as directed.

M&L Hand packing with nrocken stone or boulder (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed.

M&L for approved earth (as approved by Garrison Engineer) from sources outside defence land including all cost including roalty if any, transportion, taxes etc for filling in floors including raising of original level upto height from OGL with approved earth and including earth spreading in layers not exc 30cm thick in layers, watering, compaction and finihed to require size and shape complete all as specified and and as directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 22,600.00 (refer Tender Srl Page No 29). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

NEO BUILDERS

UNIVERSAL CONSTRUCTION

SRI A B SEN

ROY CONSTRUCTION

MUKHERJEE ENTERPRISE

M/S P. RAI CHOUDHURY AND CO.

Paritosh Saha