REPAIRS AND RE-CANNING OF ALL SORTS OF CHAIRS AND OTHER WOODEN FURNITURES INCLUDING POLISHING AT VARIOUS LOCATION UNDER AOR OF BSO(SOUTH) UNDER GE(SOUTH) BANGALORE

Amount

Chair Dining (FD-16 FD-279) Removing the existing unserviceable cane from chair dining of size 440mm x 430mm and recanning with new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern all as specified and as directed.

Chair writing (FD-20 FD-280) Removing the existing unserviceable cane from Chair writing of size 535mm x 470mm and recanning with new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed.

Chair easy (FD-17 FD-229) Removing the existing unserviceable cane from Chair easy seat/back rest of size 575mm x 510mm & 420mm x 330mm and recanning with new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed.

Stool Dressing CB (FD-27 FD-282 FD-374) Removing the existing unserviceable cane from stool dressing CB of size 420mm x 275mm and recanning with new best quality of plastic cane size 1.80mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed.

Chair Verandah (Applicable to item No 5 to 7) (FD-19 FD-256 FD-359) Removing the existing unserviceable cane from chair verandah of size 480mm x 460mm and recanning with best quality of plastic cane 4mm wide as per trade pattern as specified/directed.

Material and labour for preparing old steel surfaces of frame of chair verandah with one coat of synthetic enamel paint white colour, as shown on drawing and all as specified/directed.

Supply and fix new hard rubber toes of appropriate size, suitable to chair verandah as shown on drawing and all as specified/directed.

Chair Dining FD (Applicable to item Nos 08 to 15) (FD-16 FD-179) Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 890mmx65mmx65mm complete all as shown on drg and as specified/directed.

Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 455mmx45mmx45mm complete as shown on drg and as specified/directed.

Removing the existing unserviceable back rest and supply and fix new teak wood back rest of size 380mmx50mmx19mm complete as shown on drg and as specified/directed.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 400mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Removing the existing unserviceable rear rail and supply and fix new teak wood rear rail of size 400mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Removing the existing unserviceable side rails and supply and fix new teak wood side rails of size 380mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Removing the existing unserviceable side stiffner and supply and fix new teak wood side stiffner of size 430mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Removing the existing unserviceable middle stiffner and supply and fix new teak wood middle stiffner of size 430mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Chair Writing (Application to item Nos16 to 24) (FD-20 FD-280) Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 890mmx65mmx65mm complete as shown on drg and as specified/directed..

Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 675mmx45mmx45mm complete as shown on drg and as specified/directed.

Removing the existing unserviceable back rest and supply and fix new teak wood back rest of size 445mmx65mmx12mm complete as shown on drg and as specified/directed.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 490mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Removing the existing unserviceable rear rail and supply and fix new teak wood rear rail of size 440mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Removing the existing unserviceable side rails and supply and fix new teak wood side rails 440mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Removing the existing unserviceable/ broken Arm rest and supply and fix new teak wood Arm rest of size 495mmx50mmx19mm complete as shown on drg and as specified/directed.

Removing the existing unserviceable side stiffner and supply and fix new teak wood side stiffner of size 470mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Removing the existing unserviceable middle stiffner and supply and fix new teak wood side stiffner of size 535mmx20mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Chair easy FD (Application to item Nos 25 to 30) (FD-17 FD-229) Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 535mmx40mmx40mm complete as shown on drg and as specified/directed.

Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 535mmx40mmx40mm complete as shown on drg and as specified/directed.

Removing the existing unserviceable broken Arm rest and supply and fix new teak wood arm rest of size 610mmx55mmx25mm complete as shown on drg and as specified/directed.

Removing the existing unserviceable front frame and supply and fix new teak wood front frame of size 510mmx55mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 510mmx55mmx25mm complete as shown on drg and as specified/directed.

Removing the existing unserviceable rear rail and supply and fix new teak wood rear rails of size 500mmx50mmx25mm complete as shown on drg and as specified/directed.

Stool Dressing CB (Applicable to item Nos 31 to 33) (FD-27 FD-282 FD-374) Removing the existing unserviceable leg and supply and fix new teak wood leg of size 350mmx40mm complete as shown on drg and as specified/directed.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 355mmx50mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Removing the existing unserviceable side rails and supply and fix new teak wood side rails of size 220mmx50mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg and as specified/directed.

Chair dining JCO/OR (Application to item Nos 34 to 41) (FD/MAP II/05) Removing unserviceable PVC seat of chair dining JCO/OR and supply and fix new PVC seat of size 430mm(L)x440mm(front)/405mm(back) (W) made out of 04/05 mm thick complete all as shown on drg and as specified/directed

Removing unserviceable front leg of chair dining JCO/OR and supply and fix new teak wood leg of size 460mmx55mm x 30mm complete as shown on drg and as specified/directed.

Removing unserviceable back leg of chair dining JCO/OR and supply and fix new teak wood back leg of size 890mm x 55mm x 30mm duly curved, complete all as shown on drg and as specified/directed.

Removing unserviceable side rail of chair dining JCO/OR and supply and fix new teak wood side rail of size 430mmx65mm x 30mm complete all as shown on drg and as specified/directed.

Removing the unserviceable front rail of chair dining JCO/OR and supply and fix new teak wood front rail of size 420mmx65mm x 30mm complete as shown on drg and as specified/directed.

Removing unserviceable back rail of chair dining JCO/OR and supply and fix new teak wood back rail of size 405mm x 65mmx30mm complete all as shown on drg and as specified/directed.

Removing unserviceable side Stiffner of chair dining JCO/OR and supply and fix new teak wood side Stiffner of size 430mmx25mmx20mm complete all as shown on drg and as specified/directed.

Removing unserviceable middle Stiffner of chair dining JCO/OR and supply and fix new teak wood middle Stiffner of size 440mmx25mmx20mm as shown on drg and as specified/directed.

Chair tubular steel with / without arms (Applicable to item Nos 42 to 48) (FD-75) Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel with arms all as directed/specified and as sshown on drg.

Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel without arms all as directed/specified and as shown on drg.

Removing the existing unserviceable/damaged seats from chair tubular steel with/without arms and supply and fix new seats of size 480mmx450x25mmx4 made out of teak wood frame with half round beading at edges and recanning with new best quality of plastic cane size 2.0mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed all as directed/specified and as shown on drg.

Removing the existing unserviceable/damaged back from chair tublular steel with/without arms and supply and fix new back of size 480mmx45mmx25mmx4 made out of teak wood frame all as directed/specified and and recanning with new best quality of plastic cane size 2.0mm x 0.46 mm for weaving and 3mm x 0.60 mm for beading as per Godrej pattern as specified/directed as shown on drg.

Removing the existing unserviceable/broken arm rest and supply and fix new arm rest of size 380mmx50mmx25mmx2 with 1st class hard wood made to shape and painted with two coats of black synthetic enamel paint for chair tubular steel with arms all as directed/specified and as shown on drg.

Removing the existing unserviceable rubber shoes from bottom of chair and supply and fix new hard rubber shoes to the bottom of chair all as directed/specified and as shown on drg.

Removing the existing unserviceable PVC/rubber plug from top of chairs and supply and fix new PVC / rubber plug to the top of chair all as directed/specified and as shown on drg.

Chair School with hand board (Applicable to item Nos 49 to 52) (TP) Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint black on all external surfaces all as specified/directed and as shown on drg.

Removing the existing unserviceable/damaged PVC back and seat from chair school and supply and fix new PVC back and seat all as directed/specified and as shown on drg.

Removing the existing unserviceable 18mm pre laminated particele board top openable with PVC edging (Hinged on RHS) screwed to 25mm all as specified/directed and as shown on drg.

Removing the existing unserviceable/damaged bag stand at bottom of chair and supply and fix new bag stand all as specified/directed and as shown on drg.

Chair dining Officers (Applicable to item Nos 53 to 60) (FD/MAP II/04) Removing unserviceable seat of chair dining officers with cushion and supply and fix new seat of size 450mmx450mm made out of 75 mm thick 40 Density foam covered with tapestry cloth nailed to 12 mm thick Phenol Bonded plywood commercial, complete all as shown on drg and as specified/directed

Removing unserviceable front leg of chair dining officers and supply and fix new teak wood leg of size 420mmx50mm x 35mm complete as shown on drg and as specified/directed.

Removing unserviceable back leg of chair dining officers and supply and fix new teak wood back leg of size 950mm x 50mm x 35mm duly curved, complete all as shown on drg and as specified/directed.

Removing unserviceable side rail of chair dining officers and supply and fix new teak wood side rail of size 450mmx65mm x 25mm complete all as shown on drg and as specified/directed.

Removing the unserviceable front rail of chair dining officers and supply and fix new teak wood front rail of size 420mmx65mm x 25mm complete as shown on drg and as specified/directed.

Removing unserviceable back rail of chair dining officers and supply and fix new teak wood back rail of size 420mm x 90mmx25mm complete all as shown on drg and as specified/directed.

Removing unserviceable side Stiffner of chair dining officers and supply and fix new teak wood side Stiffner of size 450mmx25mmx20mm complete all as shown on drg and as specified/directed.

Removing unserviceable middle Stiffner of chair dining officers and supply and fix new teak wood middle Stiffner of size 420mmx25mmx20mm as shown on drg and as specified/directed.

Hat Stand with mirror (Application to item Nos 61 to 63) (FD-233) Removing unserviceable plywood from hat stand and supply and fix new plywood 4mm thick, one side teak face finish of size 1000mm x 710 mm including teak wood edging size 6 mm x 35 mm duly polished complete all as shown on drg and as specified/directed.

Removing unserviceable mirror from hat stand and supply and fix new 5 mm thick mirror of size 300 mm x 440 mm including teak wood edging size 10 mm x 12 mm as shown on drgs and as specified/directed.

Removing unserviceable aluminium pegs from hat stand and supply and fix new brass pegs of size120mmx75 mm (over all) with brass screws as shown on drgs and as specified/directed.

Table 900X600 w/o drawer (Applicable to item Nos 64 to 67) (FD-42 FD-284) Removing the existing unserviceable table top and supply and fix new top of size 900mmx600mm of prelaminated particle board 18mm of size interior grade with 4mm thick teak wood edging all round all as specified and as shown on drgs.

Removing the existing unserviceable/damaged front and back rails and supply and fix new teak wood front and back rails of size 25mmx130mmx740mm all as specified and as shown on drg.

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 60mm to 40mm(bottom) with a height of 735mm all as specified and as shown on drg.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx130mmx440mm all as specified and as shown on drg.

Table 900X600 w/o drawer (Applicable to item Nos 64 to 67) (FD-42 FD-284) Removing the existing unserviceable table top and supply and fix new top of size 900mmx600mm of prelaminated particle board 18mm of size interior grade with 4mm thick teak wood edging all round all as specified and as shown on drgs.

Removing the existing unserviceable/damaged front and back rails and supply and fix new teak wood front and back rails of size 25mmx130mmx740mm all as specified and as shown on drg.

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 60mm to 40mm(bottom) with a height of 735mm all as specified and as shown on drg.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx130mmx440mm all as specified and as shown on drg.

Table dressing with mirror ladies (Applicable to item Nos 72 to 79) Removing the existing unserviceable drawers and supply and fix new drawers of size 300mmx380mm & 315mmx115mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative with PVC lipping alround, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6 mm thick plywood, grade BWR, type BB with no. of ply 5 for bottom of drawers, including fittings such as knobs etc all as specified and as shown on drg. Note:-Each drawer shall be measured as single unit.

Removing the existing broken glass shutters and supply and fix new glass shutters of size 300mmx390mm all as specified and as shown on drgs. Note:- Each glass shutter will be measured as single unit.

Removing the existing unserviceable aluminium channel and supply and fix new aluminium channel of width 10mm thick suitable for the drawer of size 530mm long all as shown on drgs.

Removing the existing unserviceable plywood portion from back of mirror and supply and fix new back with frame of size 395mmx1230mm made out of 6 mm thick plywood, grade BWR, type BB with no of ply 5 all as specified and as shown on drgs.

Removing the existing unserviceable mirror and supply and fix new mirror of size 366mmx1220mm, 5 mm thick complete all as specified and shown on shown on drgs.

Removing the existing unserviceable 12mm ply wood from back and supply and fix new back of size 395mmx900mm of table dressing ladies made out of 12 mm thick plywood commercial quality all as specified and as shown on drgs.

Removing the existing unserviceable frame with legs and supply and fix new teak wood frame with 4 legs of size 235mmx40mmx25mm & 650mmx40mmx25mm all as specified and shown on drgs.

Removing the existing unserviceable leg and supply and fix new leg made out of teak wood of 04 Nos legs of size 155x45x45mm all as specified and as shown on drgs. Note:- Each leg shall be measured as single unit.

Table dressing with mirror gents (Applicable to item Nos 80 to 84) (FD-31 FD-230) Removing the existing unserviceable top of table dressing Gents and supply and fix new top of size 900mmx300mm made out of 18mm thick pre-laminated MDF board BW Type with 1.5mm thick decorative with PVC lipping all exposing area all as shown on drgs

Removing the existing unserviceable bottom of table dressing Gents and suplply and fix new bottom of size 900mmx300mm made out of 18 mm thick plywood commercial quality all as shown on drgs.

Removing the existing unserviceable side partition and supply and fix new side partition of size 300mmx135mm made out of 18mm thick pre-laminated MDF board BW Type all as shown on drg. Note : Each side or partition shall be measured as single unit.

Removing the existing unserviceable drawers of size 4x280mmx130mm of table dressing Gents and supply and fix new drawers made out of teak wood plank 12mm thick for sides and back and 18mm thick pre-laminated MDF board BW Type for front and 6 mm thick plywood for bottom of drawers with fitting such as knobs etc all as specified and as shown on drg. Note : Each drawer shall be measured as single unit.

Removing the existing unserviceable mirror and supply and fix new mirror of size 390mmx760mm, 5mm thick with back and frame all as specified and as shown on drgs including with teak wood support all as shown on drgs and as directed.

Table 900X600 with drawer (Applicable to item Nos 85 to 88) (FD-41 FD-283 FD-55) Removing the existing unserviceable table top and supply and fix new top of size 900mmx600mm of 18mm thick pre-laminated MDF board with 4mm thick teak wood edging all round all as specified and as shown on drgs.

Removing the existing unserviceable/damaged front and back rails and supply and fix new teak wood front and back rails of size 25mmx130mmx740mm all as specified and as shown on drg.

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 60mm to 40mm(bottom) with a height of 735mm all as specified and as shown on drg.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx130mmx440mm all as specified and as shown on drg.

Table bed side (Applicable to item Nos 89 to 93) (FD/E6/MAP/15(R) Removing of UNSV top from table bed side and supply and fixing new top made out of 18mm thick prelaminated particle board with PVC edging fixed to frame all as shown on drawing and all as directed by Engineer-in-charge

Removing of UNSV side from table bed side and supply and fixing new side made out of 18mm thick prelaminated particle board fixed to frame with suitable size of screws all as shown on drawing and all as directed by Engineer-in-charge

Removing of UNSV back ply from table bed side and supply and fixing new back made out of 18mm thick plywood fixed to frame with suitable size of screws all as shown on drawing and all as directed by Engineer-in-charge

Removing of UNSV drawers from table bed side and supply and fixing new drawer made out of 18mm thick prelaminated particle board all as shown on drawing and all as directed by Engineer-in-charge

Removing of UNSV handle from table bed side and supply and fixing new handle of size 100mm long MS all as shown on drawing and all as directed by Engineer-in-charge

Table without drawer for Havs & ORs steel 900 X 600 X 760mm (Applicable to item Nos 94 to 97) (FD-1007) Removing the existing unserviceable top and supply and fix new top of particle board commercial 18 mm thick exterior grade pasted with 1.5 mm thick plastic laminated sheet fixed on top as directed and as shown on drgs.

Removing the existing unserviceable/damaged frame and replacing with new frame of 25mm x 25mm square ms tube 1.6 mm thick welded and applying one coat of red oxide primer including welding to the table and all as specified and as shown on drgs.

Removing the existing unserviceable/damaged leg and replacing with new leg of 25mm x 25mm square ms tube 1.6 mm thick welded and applying one coat of red oxide primer including welding to the table and all as specified and as shown on drgs.

Material and labour for preparing old steel surfaces of steel frame of table 900x600x760 mm with one coat of synthetic enamel paint all as specified and as shown on drgs.

Table 900x600 with Drawer (FD-41 FD-283 FD-224 FD-55) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Chair dining (FD-16 FD-279) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed.

Chair dining Map (FD/MAP II/04) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed.

Chair Easy (FD-17 FD-229) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Chair writing (FD-02 FD-280) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Hat stand with mirror (FD-233) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Vivek Engineers (BID ID -3307699)

SARGAM ENTERPRISES (BID ID -3313098)

REENA INDUSTRIES (BID ID -3309662)

Global Furnisherts (BID ID -3309787)

Ms GHOSH AND SONS (BID ID -3311751)

PRIYADARSHINI CONSTRUCTIONS (BID ID -3315849)

Mavee Syndicate (BID ID -3307368)