REPAIR AND PERIODICAL SERVICES TO CERTAIN BUILDINGS, REPAIR TO SEWAGE LINES AND ELECTRIFICATION WORK IN VARIOUS UNITS OF RR IN THE AOR OF AGE B/R-III UNDER GE 881 EWS

Amount

B/R PORTION: Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 15mm thick cement plaster rendering in CM 1:4 on fair faces of bricks or concrete surfaces, chajja and suspended work, finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of oil emulsion distemper over and including 1 mm thick wall care putty, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles, over and including 10mm thick screed bed in CM (1:4), complete all as specified and directed.

All as per ser item No.11 above but as in vertical surfaces of wall such as in dado/skirting etc. fixed over & including 10mm thick plaster in CM 1:4, complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but not exc 2 sqm, each, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed.

S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F aluminium anodised barrel tower bolt, extruded section, 150 mm long, complete all as specified and directed.

S&F aluminium handle, cast type of size 150mm, complete all as specified and directed.

S&F mild steel butt hinges of size 100mm, medium weight, cold rolled, complete all as specified and directed.

S&F 250mm long aluminium alloy anodized sliding door with haps, staple (bolt type) and fixing clips of sheets, cast or extrusted sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm with tinned tacks or aluminium wire stapple, complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm with tinned tacks or aluminium wire stapple, complete all as specified and as directed.

S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer, complete all as specified and directed.

M&L for complete removal of existing treatement from wall plaster and applying one coat of oil bound distemper any tint on walls, complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

S&F in repair Bib tap 15 mm bore, Brass CP, fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair Stop / Angle cock (ISI Marked), cast copper alloy, chromium plated with capston head, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 'S' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and syphonage pipe etc. including lime concrete bedding, complete all as specified and directed.

S&F in repair PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints, complete all as specified and directed.

S&F in repair Vitreous china wash basin, white flat back, size 580 x 450 mm excl taps, waste chain and plug and porcelain stopper but incl brackets & CP waste coupling ,complete all as specified and as directed.

S&F in repair PVC connection 15 mm bore with CP nuts of length 450 mm long ,complete all as specified and as directed.

S&F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed for iron pipe, complete all as specified and directed.

S&F in repair 32 mm bore PVC waste pipe, complete all as specified and as directed.

S&F in repair brass CP jet spray with holder including 1.5m long PVC/Chromium plated flexible PVC pipe, necessary nut bolts and PVC washers fixed with PVC seat cover for pedestal pattern water closet, complete all as specified and directed.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised or PVC hinging device complete all as specified and directed.

Cleaning/disinfecting of PVC/cemented water storage tank of any capacity with disinfecting chemicals (chlorine) properly with water thoroughly flushed out, complete all as specified and directed by Engr-in-Charge.

Cleaning of under ground sewage lines of 100mm/150 mm bore including manholes, CI stacks.gully traps etc. by means of cleaning by roding from manholes to manholes till the cleared/cleaned water running under sewage line and flushing after cleaning, taking out sludge collected in manholes, removing & depositing the same outside the periphery of defence land in the pit at a minimum distance of 50 m from nearby living accn and covering the sludge in pit with earth and finally spraying unslaked lime, dry, around the manholes including taking off and re-fxing cover the manhole pitt, complete all as specified and directed. Note:-Cost of Taking out sludge, transporting of sludge out side the defence land, earth work & deposition in the pit is deemed to be included in the unit rate to be quoted by tenderer.

Opening of cover (of any description and size) of septic tanks and soakage wells/pits, de-sludging / de-watering contaminated with fine waste materials ( liquid sludge) alongwith solid waste from septic tank and soakage wells/pits of any capacity/depth by mechanical pumping (Truck mounted mechanical machine) / manually making it fully functional to to entire satisfaction of Engineer-in- charge and and removing & depositing the sludge outside the periphery of defence land at a minimum distance of 50 m from nearby living accn and burring in borrow pits including covering with fresh mud and refixing the cover after cleaning / removing the liquid waste material of septic tanks / soakage wells / pits including cutting holes through slab/ wall where required for inserting pipe and making good the same with cement mortar to match with existing surfaces complete all as specified and directed by Engr-in-Charge. Note:-Cost of Taking out sludge, transporting of sludge out side the defence land, earth work & deposition in the pit is deemed to be included in the unit rate to be quoted by tenderer.

Cleaning of blockage of Water Closet (Indian or European), trap & pipe line upto first manhole manually by Roding and making it fully functional by flushing with water to entire satisfaction of Enginerr-in-charge including removing the deposited sludge/solid/liquid material, outside MD land and burring in borrow pits including covering with fresh mud, complete all as specified and directed by Engineer-in-charge. Note:-Cost of Taking out sludge, transporting of sludge out side the defence land, earth work & deposition in the pit is deemed to be included in the unit rate to be quoted by tenderer.

M&L for 75mm thick PCC 1:4:8 type D 2 (using 40 mm graded stone aggregate) as in sub base etc, complete all as specified and directed.

M&L for spreading, laying of sand as in cushioning under floors before laying of blocks incl watering, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade,laid jointed pointed with grey cement and no pigments, complete all as specified and directed by Engr-in-Charge. Note: The sample shall be got approved by GE before bulk procurement & lot shall be got tested independently by the GE.

E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow, Tee, collars, bends etc. with PVC terminals box & cover for mounting swtches, sockets, fan regulator etc for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following :-

One light/fan point controlled by one way switch 6 Amp complete all as specified and directed.

One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.

One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.

All as per srl item No 45 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 2.5 Sqmm size cable as phase & neutral and one single core 2.5 Sqmm as in continuous earth wire complete all as specified and directed.

S&F in repair ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC/poly carbonate, insulated body, complete all as specified and directed.

S&F in repair switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.

S&F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. for 1200 / 1400mm sweep, complete all as specified and directed.

S&F in repair Switch socket multipurpose combination 2 in 1, 5 pin, 6 Amp flush type universal, complete all as specified and directed.

S&F in repair socket outlet 2 in 1, 3 pin, 5 Amp flush type universal, complete all as specified and directed.

S&F in repair Switch socket outlet multipurpose combination 2 in 1, 6 pin, 5 and 15 Amp flush type universal, complete all as specified and directed.

Supply and fixing in repair LED batten 1x 20W, with square profile and decorative box type with driver, holder incl LED tube light connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in repair LED lamp, CDL 10 watt, B22 base, complete all as specified and directed.

S&F in repair Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for complete servicing and repair of DG set capacity 62.5 KVA including replacement of Engine oil and all types of filters as per manufacturer's manual and as directed by Engineer in Charge. NOTES: - (i) Engine oil, oil filter, coolant replacement will be measured and paid separalety under revelant item. (ii) 'B' check shall be carried out by the authorised dealer of kirloskar/ Crompton Greaves and certificate of 'B' check shall be produced by the contractor from authorised dealer of Kirloskar / Crompton Greaves (iii) Testing equipments required for `B' check shall be of contractor's responsibility.

Supply only Special engine oil 20 W 40 grade all as recommended by manufacturer for first filling in the new DG sets, complete all as specified and directed. Make: Kirloskar/ Castrol

Supply only Coolant concentrate for filling in radiator of DG set complete all as specified and directed.

M&L for cleaning of radiator assy by means of dismentlling from engine completely, flushing out complete old coolant/water, cleaning by chemical wash , soldering /brazing complete and reassembling the same to the engine for smooth and efficient functioning complete all as specified and directed.

Supply only Lubricant oil filter element suitable for engine which has to be repaired at site/workshop complete all as specified and directed by Engineer-in-Charge.

Supply only Fuel filter suitable for engine which has to be repaired at site/workshop complete all as specified and directed by Engineer-in-Charge.

Supply only Fuel filter housing suitable for engine which has to be repaired at site/workshop complete all as specified and directed by Engineer-in-Charge.

Supply only belt suitable for engine which has to be repaired at site/workshop complete all as specified and directed by Engineer-in-Charge.

Supply only Hose pipe for air cleaner including hose clips suitable for engine which has to be repaired at site/workshop complete all as specified and directed by Engineer-in-Charge.

M&L for complete servicing and repair of refrigerator/deep freezer of any capacity, servicing and cleaning of all accessories, oiling of fan motor, checking of wiring connections, and re-fixing in the same in position testing complete all as specified and directed by Engr-in-Charge.

Supply and filling gas charging required to the System of suitable type R-34/12/32 /R22 or as per existing at site complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and exc 1.50m in depth and getting out in any type of soil complete all as specified and as directed.

Returning, filling in surplus spoil including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Removing of excavted soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

Supply and laying in trenches/on floor/pole or under road/culvert 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 16 Sqmm 4 core, incl taking out old unsv cable, complete all as specified and directed.

Supply only chlorination chemical highly efficient (high strength) calcium hypochloride 65% to 70% chlorine content based granular disinfectant more stable in sealed container, no sodium/ iron/ mercury/ heavy metal contaminations, complete all as specified and directed. Note: (i) The contractor shall produce manufacturer's test certificate and purchase vouchers of calcium based granular disinfectant. (ii) Qty shown at column 3 will not accepted at one time as the material having lesser expiry period. (iii) The calcium based granular disinfectant shall be brought at site in sealed plastic container. (iv) Calcium based granular disinfectant shall be of approved make as approved by E-in-C's branch or HQ CENC.

S&F Galvanized steel water tubing, 25 mm bore, medium grade, with all fittings , fixed complete to walls or laid in floors/trenches, complete all as specified and as directed.

S&F in repair 25mm bore globe or gate valve cast copper alloy (ISI marked) with iron wheel head,screwed both ends for iron pipe complete all as specified and directed.

Repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at contractor's work shop, incl dismantling complete the ceiling fan parts, inspecting serviceability of all the parts, refixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, greasing/oiling etc assembling, cleaning and testing of ceiling fan complete all as specified and directed. Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only. (ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'. (iii) Cost of minor part i.e. Cotter pin, screws shall be deemed to included in the cost of quoted rate.

Supply only bearing good quality for ceiling fan 1200mm/1400mm sweep ISI marked complete all as specified and directed.

Supply only Gun metal bush for ceiling fan 1200mm/1400mm sweep complete all as specified and directed.

Supply only capacitor 2.5 mfd ISI marked complete all as specified and directed.

Supply only brass bracket assy for hanging the ceiling fan 1200mm/1400mm sweep complete all as specified and directed.

Supply only 3 core flexible wire 40/.0076, white colour from ceiling rose to fan connector complete all as specified and directed.

Supply only stator shaft for ceiling fan complete all as specified and directed.

M&L for removing of old burnt winding of any size , type and rewinding of stator winding with superior quality copper wire with insulation complete all as specified and directed.

M&L for complete servicing and repair of RO Plant of any capacity, servicing, cleaning or replacement of all accessories and re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Noe:- Unsv accessories will be measured and paid seperately under respective of Sch items as supply only.

Supply only micron cartridge filter sponge 4.5" x 20" of 4 micron suitable for existing RO plant complete all as specified and directed.

Supply only RO antiscalant chemical minimum 5 litre can, complete all as specified and directed.

Supply and fix in replacement electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

S&F exhaust fan 300 mm sweep with louvers shutter, made out of sturdy engineering plastic 1200 RPM, single phase 240 Volts including all connecting accessories and incl taking out old existing exhaust fan, complete all as specified and directed.

S&F 1100 volts grade heavy duty cable PVC insulated solid aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat of circular of size 10 Sqmm 2 core including taking down existing old service connection, complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging, testing and commissioning complete all as specified and directed.

S&F in repair MCB SPN 40-63 amps 415 volts 10 KA 'C' series, complete all as specified and directed.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed.

Supply and fix PVC connection heavy duty, nylon braided suitable for hot water with brass alloy chromium plated nuts and nylon washers, complete of size 15 mm dia x 450 mm long, complete all as specified and directed.

NATIONAL TRADING COMPANY (BID ID -3302360)

M/S KHAN ENTERPRISES (BID ID -3298364)

M/S MANHAS ENTERPRISES (BID ID -3300305)

MEELU ENTERPRISES (BID ID -3300396)

M/S Farooq Ahmed Bhat (BID ID -3298607)