Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.6 LAccepted-AOC 34 C R AVENUE JABAKUSUM HOUSE 3RD FLOOR ROOM NO 312 KOLKATA 700 012 | KOLKATA | WEST BENGAL | 700012 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹39.1 L+₹2.9 L (8.13%)Rejected-Finance | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹39.4 L+₹3.2 L (8.98%)Rejected-Finance 6 NALAPUKUR LANE FLAT 2C SENHATI COLONY KOLKATA 700034 WEST BENGAL | KOLKATA | WEST BENGAL | 700034 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹40.6 L+₹4.5 L (12.3%)Rejected-Finance AKASHGANGA SUKANTA MARG MONIRAMPORE BARRACKPORE WEST BENGAL 700120 | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹40.8 L+₹4.7 L (13.0%)Rejected-Finance 30 SHIVTALLA STREET KOLKATA 700 007 | KOLKATA | KOLKATA | WEST BENGAL | 700007 | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
27 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
8080/B/E8
2022_MES_550356_1
GE/ALP (8080B) OF KOLKATA 2022-23
Open Tender
Civil Works
Item Wise
240 days
GE ALIPORE KOLKATA
Class D and category a (i)
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹70,000
Yes
14 Dec 2022
6 Sept 2022
28 Sept 2022
6 Sept 2022
27 Sept 2022
20 Sept 2022
Amount
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc complete all as specified and as directed by the Engr-in-charge.
Taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed by the Engr-in-charge.
All as per item No 2 above here in before but exc 2 Sqm each.
Taking down of steel window with guard bar complete all as specified and as directed.
Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting n exc 1 sqm each, complete all as specified and as directed.
Taking down of shutter and refixing of shutters of any discription in the same opening after easing and adjusting area exc 1 Sqm and n exc 2 sqm each, complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and removing from site complete all as specified and as directed by the Engr-in-charge.
All as per item No 7 above here in before but exc 1.5 sqm and not exc 4 Sqm each and removing from site complete all as specified and as directed by the Engr-in-charge.
Material and labour for preparation of old surfaces of wall and applying one coat of cement base paint externally complete all as specified and as directed by Engr-in charge.
Material and labour for preparation of old decorated surfaces and applying one coat of exterior acrylic emulsion painting on walls complete all as specified and as directed.
Material and labour for preparation of old decorated surfaces and applying two coats of exterior acrylic emulsion painting on walls complete all as specified and as directed.
Material and labour for Preparation of old decorated surfaces of walls/ceilling by washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper (oil emulsion) on walls/ceilling complete all as specified. complete all as specified and as directed.
Material and labour for preparation of old decorated surfaces of wall and stopping of painted surface and applying one coat of interior plastic emulsion paint on walls complete all as specified and as directed.
All as per item No 13 above as here in before but as on ceiling.
Material and labour for preparation of old decorated surfaces of wall and applying two coats of interior plastic emulsion painting over a coat of primer on walls complete all as specified and as directed.
Material and labour for preparation of the uneven surfaces of walls and applying two layer of wall care putty after (1mm thick each layer) complete removal of existing treatment complete all as specified and as directed.
Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for two coats of lacquer based polish to existing wooden surfaces over 10cm width or girth including complete removal of existing finish using emery paper of suitable grade, making the surface smooth using best quality putty complete all as specified and as directed.
Supply and fixing decorative wallpaper over a coat of primer on wall surface complete all as specified and as directed.
Preparation of old surface include brooming down or steel wire rushing; scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots of old surface of floor tiles/paver block and applying two coats of apex floor guard paint etc complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for. complete all as specified and as directed.
Supply and fixing Steel work of MS Square/round pipe as in purline, rafter, post and trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, upto 4 storey bldg complete all as specified and as directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, upto 4 storey bldg complete all as specified and as directed.
Supply and fixing Pre- painted mangalore pattern galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc, upto 4 storey bldg complete all as specified and as directed.
Supply and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges etc fixed with self tapping screws etc, upto 4 storey bldg complete all as specified and as directed.
Material and labour for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for inseritng roof sheet in wall, etc., and making good, cutting not exc 10 cm girth in brick wall. upto 4 storey bldg complete all as specified and as directed.
Material and labour for RCC Nominal mix using 20 mm graded stone aggregate as in chajja, beam, facia, fin, facia, parapets balcony and similar suspended work complete all as specified and as directed.
Supply and fixing 12 mm dia wall anchor fasterner system machanical/epoxy based of standard make for conactions in concrete i/c power drilling. Cleaning of holes by air blowing, insertion of epoxy cartridge with plastic nozzles as required, placing internally threaded screw driving of boltes etc, upto 4 storey bldg complete all as specified and as directed.
Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.
Supply and fixing in repars 15 mm bore tube medium grade galvanised with all fittings fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.
All as per item No 32 above here-in-before but bore in 20 mm
Supply and fixing in repair sensor of wall mount urinal complete all as specified and as directed.
Supply and fixing in repair stain less steel hand dryer complete all as specified and as directed. Make Cera and equivelent.
Supply and fixing in repair 15mm bore CP angular stop cock with crutch or butterfly handle complete all as specified and as directed.
Supply and fixing in repair 15mm bore CP stop cock fancy type, with crutch or butterfly handle complete all as specified and as directed.
Supply and fixing in repair CP wash hand basin mixture for mixing hot and cold water including joints to 15 mm bore pipes or union and plugging and screwing to wall with all fittings, complete all as specified and as directed.
Supply and fixing in repair CP wall mixture telephonic type for mixing hot and cold water including three joints to 15 mm bore pipes or union and plugging and screwing to wall with shower conection with all fittings, complete all as specified and as directed.
Supply and fixing in repairs 15 mm bore two way Bib tap CP, screwed down screwed for iron pipe complete all as specified and as directed.
Supply and fixing in repairs 15 mm bore Bib tap CP long body, screwed down screwed for iron pipe complete all as specified and as directed.
Supply and fixing in repair CP papper holder fency type complete all as specified and as directed.
Supply and fixing in repair CP soap dish fency type complete all as specified and as directed.
Supply and fixing in repair towel rack stainless steel 600mm long complete all as specified and as directed.
Supply and fixing in repair shower penel aluminium aloy body size 200x1500mm, overhead shower, hand shower and 4 body massage jet, CP hand shower with 1.5 meter long hose with stainless steel finish, complete all as specified and as directed.
Supply and fixing in repair vitreoues china WHB, white, flat back, Table Top and wall hung including CI brackets, Bottle Trap, CP Pillar tap fency type, CP connector pipe 15mm bore and 450mm long complete all as specified and as directed.
Supply and fixing in repair vitreoues china WHB, white, flat back, of size 550X400mm including CI brackets, CP waste coupling 32 mm bore, PVC waste pipe 32mm dia, PVC connector pipe 15mm bore and 450mm long with PTMT coupling at both ends complete all as specified and as directed.
Supply and fixing in repair PVC connection 15 mm size pipe with PTMT nut of Length 450mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed.
Supply and fixing in repairs, vitreous china wash down water closet pan, (pedestal pattern) white, including P or S trap and with plastic water closet seat white, closed pattern with flat bottom, and cover and mild steel chromium plated aluminised hinging device etc complete all as specified and as directed.
Supply and fixing vitreous china white wash down water closet wall hung with flushing cistern, hush seat cover and internal fittings complete with fixing bolts and making all necessary connections complete all as specified and as directed. Make; Parryware or equivalent approved.
Supply and fixing 12mm thick toughened glass for shower partition openable/ sliding type fixed with aluminium frame complete, fixing bolts,handle and all necessary fittings complete all as specified and as directed.
Supply and fixing in repair CP hand shower (faucet) fency type with one meter flexible tube with wall hook complete all as specified and as directed.
Supply and fixing 75mm PVC (SWR) multi floor trap with steel grating including jointing with solvent cement complete all as specified and as directed.
Supply and fixing 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and as directed by Engineer-in-charge.
Supply and fixing 110 mm bore PVC(SWR) pipe bend single socket complete all as specified and as directed by Engineer-in-charge.
Dismangling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceavble tiles from site and rubish off the premises complete all as specified and directed by the Engr-in-charge.
Demolition of cement concrete on roofs, floors, (other than ground floors) including removal of debries to out side MD land complete all as specified and as directed
Material and labour for PCC type D-2 (1:4:8) (Using 40mm graded stone aggregate) 75 mm thick as in sub base for floors, complete all as specified and as directed.
Material and labour for 25 mm thick PCC (1:2:4) type B-0 (Using12.5 mm graded stone aggregate) as in sub base of floor, complete all as specified and as directed.
Material and labour for Non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm but n. exc 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including of 15 mm thick screed bed in cement mortar (1:4), complete all as specified and as directed.
Material and labour for coloured Glazed ceramic tiles in vertical surfaces of size 450x300x7 mm and 600x300x7 mm thickness on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
Material and labour for Double charged colour Vitrified ceramic tiles 10mm thick (square/ rectangular) light shade polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floor, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including of 15 mm thick screed bed in cement mortar (1:4), complete all as specified and as directed.
All as per Item No 64 above but in vertical surfaces such as skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10mm thick rendering in cement mortar (1:3) as backing coat, complete all as specified and as directed.
Material and labour for 25 mm thick prepolished coloured chequered cement concrete tiles glossy finish with mixture of grey cement with pigment area of tiles not exceeding 0.16 sqm each over and including 15 mm thick screed bed in cement mortar (1:4) set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.
Material and labour in repair for Granite slab (of any type) 18-20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 15mm thick rendering/screed bed in cement mortar (1:4) as backing coat, complete all as specified and as directed.
Material and labour for PCC (1:3:6) type C1 (Using 20mm graded stone aggregate) as in bed blocks for hold fasts including making good of disturbed portion with plaster to match with existing surface complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing for curtain rods 20mm dia decorative aluminium alloy with fixing brackets including taking down old wooden pelmet box on wall complete all as specified and as directed. (upto 4 storey of building)
Supply and fixing bracket decorative type for 20mm curtain rods aluminium alloy complete all as specified and as directed. (upto 4 storey of building)
Supply and fixing 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamferred put together with Glue, pinned at joints complete all as specified and as directed by the Engr-in-charge.
Supply and fixing 30 mm thick factory made flush shutters, solid core onstruction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by the Engr-in-charge.
Supply and fixing 35mm thick factory made 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauze ect (wihout sash bars), edge of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc sizes of memebers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and as directed by the Engr-in-charge.
Supply and fixing Solid PVC Moulded Door Frame of size 50mm x 47mm made out of 5mm Moulded/printed PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-charge. (upto 04 storey of building)
Supply and fixing factory made solid panel PVC Moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face supply and fixing in frame complete all as specified and as directed.
Supply and fixing 100mm long butt hinges medium weight, cold rolled mild steel complete all as specified and as directed by the Engr-in-charge.
Material and laobur for Hacking Out Old Broken Glass (any thickness, size, quality or description) from Wooden/steel Frames, Glazed with Putty or fixed with Beads, complete all as specified and as directed.
Material and labour for Sheet Glass, 3.0mm thick glazing with beads or Oil Putty, not exc. 0.50 sqm in each Pane, complete all as specified and as directed.
All as per item No 78 above but butfigured pinheaded glass complete all as specified and as directed.
Supply and fixing 150 mm long aluminium anodised , barrel tower bolts of extruded section complete all as specified and directed by the Engr-in-charge.
Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing 300mm long aluminium alloy anodised sliding door bolts and hasp and staple (Bolt type) and fixing clips of sheets cast or extruded sections and fixing bolts and sliding bolts or extruded section ot cast alum alloy and fixed length of bolt 300mm complete all as specified and as directed.
Material and labour for preparation of new or previous untreated wood and wood based surfaces of any description over 10 cm girth or width not otherwise described and applying two coats of Synthetic enamal paint over a coat of pink primer. complete all as specified and as directed.
Repairing of aluminium door shutters fixed /side hung/sliding type with necessary jointing cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading , screws, etc and locking arrangement , complete all as specified and as directed.
Supply and fixing in repair 150 mm long fency type brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed. complete all as specified and as directed.
Supply and fixing in repair 150 mm aluminium handles, cast type, anodised. complete all as specified and as directed.
Supply and fixing in repair 150 mm long fency type brass handles, fabricated type, anodised. complete all as specified and as directed.
Supply and fixing in repair 125 mm long fency type brass handles, fabricated type, anodised.
Supply and fixing in repair Brass sliding door bolt 300 mm long with sand or die-cast brass hasp, staple ( Bolt type) and fixing with rolled or drawn brass bolts. complete all as specified and as directed.
Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fixing in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fixing powder coated aluminium sliding windows on 2 tire frame of section 64mm x 30mm x 1.55mm and shutters of section 20mm x 40mm x 1.55mm fixed with 5mm thick plain sheet glass with 25 micron solar control film reflective type rubber gasket, handles, fixed with aluminium frame with all necessary fittings etc complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing powder coated aluminium sliding windows sliding on 3 tire frame of section 92mmX30mm X1.55mm and shutters of section 20mm X40mm X1.55mm fixed with 5mm thick coloured sheet glass/wiremesh with rubber gasket , handel lock, 'U' channel with including with all fittings etc and etc complete all as specified and as directed.
Supply and fixing in repair aluminum (extruded section Body) body door closer hydraulically regulated design No 3( Make Hyper) suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.
Material and labour for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction, complete all as specified and as directed.
Material and labour for rendering 15mm thick plaster in cement mortar (1:4) on fair faces of brick or concrete surface of wall and finished even and fair without using extra cement, complete all as specified and as directed.
Material and labour for rendering 15 mm thick on fair faces of brick work in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
All as per item No 97 above but 5mm thick in cement mortar (1:3) as In celling complete all as specified and as directed.
Preparation of newly plastered wall surfaces and appling two coat of cement base paint over a coat of cement primer complete all as per specified and directed.
Material and labour for preparation of new plastered surface of wall and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed.
All as per item No 100 above here-in-before but on ceiling. complete all as specified and as directed.
Demolition of brick work or stone /boulder masonry built in cment mortar or cement lime mortar including removing demolished materials complete all as specified and directed
Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.
Material and labour for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) all as specified.
Supply and fixing framed work such as grills to window/ventilation, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc.complete all as specified and as directed.
Material and labour for false ceiling with 4 mm thick high pressure steam curd (HPSC) no asbestos building boards fixed over GI poweder coating white or framed work GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x595 mm with 1.5 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with gred size 60 x 120 cm complete all as specified and as directed.
Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. all complete as specified and as directed.
Material and labour for point wiring for one light/ bell/ fan controlled by one number one way switch complete with PVC insulated unsheathed FRLSH multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC casing caping medium grade of suitable size minimum 25 mm ISI Marked complete with one run of FRLSH PVC insulated copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover ISI marked for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing complete all as specified and as directed. Note : Proper Colour code should be maintained to identify phase, neutral & earthing.
All as per item No. 109 above but for 5 Amps Socket on same board complete all as specified and as directed.
All as per item No. 109 above but for 05 A SSC on independent board complete all as specified and as directed.
All as per item No. 109 above but for 15 A SSC with 2.5 sqmm PVC insulated copper conductor complete all as specified and as directed.
Material and labour as in repair / replacement for point wiring for one modular light/ bell/ fan controlled by one number one way switch complete with PVC insulated unsheathed FRLSH multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade ISI Marked complete with one run of FRLSH PVC insulated copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing complete all as specified and as directed. Note : Proper Colour code should be maintained to identify phase, neutral & earthing.
All as per item No 113 above but for 3 pin 6 Amps modular socket out let on the same board with 1.5 sqmm cable complete as specified and as directed.
All as per item No.113 above but for modular socket 6 Amps controlled by 5 pin 6 Amps switch on the independent board with 1.5 sqmm cable complete as specified and as directed.
ditto- all as per item No. 113 above but for modular socket 16 Amps controlled by 5 pin 16 Amps switch on the independent board with 2.5 sqmm cable complete as specified and as directed.
Dismantling and taking down carefully sub-main wiring any size including wooden batten etc and making good the disturbed surfaces of wall/ floor to match the existing wall/ floor etc complete all as specified and as directed.
Material and labour for circuit/sub-main wiring (surface type) with two run of PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4.0 Sqmm PVC insulated & unsheathed single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade for earth continuity conductor connected to common earth dolly, drawn through existing PVC casing caping complete all as specified and as directed by the Engr-in-Charge. Note : (i) Three runs of 4.0 Sqmm cable shall measured as one length.
All as per item No. 118 above but with 6 sqmm PVC insulated copper conductor complete all as specified and as directed by the Engr-in-Charge. Note : (i) Three runs of 6 Sqmm cable shall measured as one length.
Supply and fixing in replacement of 20mm dia rigid non-metallic PVC conduit (Medium duty) exclusive of boxes (Junction or terminal) but inclusive of all tees, bends, Elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles pipe hooks etc complete all as specified and as directed by the Engr-in-Charge.
All as per ser item No 120 here-in-before but 25mm dia
Supply and fixing in replacement of 25mm size PVC casing caping 2mm thick complete with all accessories complete all as specified and directed by the Engr-in-Charge.
Supply and fixing in replacement 20mm dia PVC Flexible conduit complete all as specified and as directed by the Engr-in-Chrage.
Supply and fixing in replacement PVC junction box suitable for 20mm dia conduit complete all as specified and as directed by the Engr-in-Charge.
All as per ser item No 124 here-in-before but 25mm dia
Supply and fixing MS box made of 1.6mm thick MS sheet painted with smoke grey paint on all sides after dismantling old one including making good the disturbed surfaces complete all as specified and as directed of the following sizes :-
(a) Size 25cm x 20 cm x 6 cm
(b) Size 15cm x 10cm x 6 cm
(c) Size 10cm x 10cm x 4 cm
Supply and fixing in repair Ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 6 Amps, 230 V. complete all as specified and as directed.
Supply and fixing in repairPiano switch flush type single pole one way 5 Amps, 230V. complete all as specified and as directed.
Supply and fixing in repair Switch Socket combination flush type, 2 in 1 multipurpose, 6 Pin, 5 Amps and 15 Amps controlled by one switch, ISI marked. complete all as specified and as directed.
Supply and fixing in repair Switch Socket combination, 2 in 1, 5 Pin, 5 Amp flush type ISI Marked. complete all as specified and as directed. .
Supply and fixing in repair Switch piano flush type, single pole one way 15 Amps, 230V. complete all as specified and as directed.
Supply and fixing in repair Socket outlet flush type, 2 in 1, 5 pin,5 & 15 Amps, 230 V. complete all as specified and as directed.
Supply and fixing in repair Call bell musical door chrome AC 230 volts single pole with 2 Nos AA Battery complete all as specified and as directed.
Supply and fixing in repair Batten holder PVC / Poly carbonate with black plate suitable for batten. complete all as specified and as directed.
Supply and fixing in repair Socket outlet flush type 2 in 1, 5 pin, 5 Amps, 230 V. complete all as specified and as directed.
Supply and fixing in repair Ceiling fan regulator electronic flush type suitable for 230 V AC. complete all as specified and as directed.
Supply and fixing in repair Modular type switch, one way 6 Amps , 1 module complete all as specified and directed.
Material and labour modular type socket 5 pin, 6 Amps combined 2 module complete all as specified and as directd.
Material and labour for Modular type socket 5 pin, 16 Amps combined 2 module complete all as specified and as directed.
Material and labour for Modular type switch, one way 16 Amps, 1 module complete all as specified and as directed
Material and labour for Modular type fan regulator step down 120 Watt, 2 module complete all as specified and as directed.
Material and labour modular white cover plate with frame 2 module including taking down of old one complete all as specified and as directed.
Material and labour modular white cover plate with frame 3 module including taking down of old one complete all as specified and as directed.
Material and labour modular white cover plate with frame 6 module including taking down of old one complete all as specified and as directed.
Material and labour modular white cover plate with frame 8 module including taking down of old one complete all as specified and as directed.
Material and labour modular white cover plate with frame 12 module including taking down of old one complete all as specified and as directed.
Material and labour modular metal flush box 1 / 2 module including taking down of old one complete all as specified and as directd.
Material and labour modular metal flush box 3 module including taking down of old one complete all as specified and as directed.
Material and labour modular metal flush box 6 module including taking down of old one complete all as specified and directed.
Supply and fixing modular Metal flush box 8 module complete all as specified and as directed by the Engr-in-Charge. Make - Legrand Cat no. 6890 42 or equivalent make
Material and labour modular white cover plate with frame 12 module including taking down of old one complete all as specified and as directed. Make:-Legrand Cat no. 6890 42 or equivalent make
Taking down sketch light fittings of any description including replacement of electrical brass holder, flexible wire including cleaning of glass shades fittings and refixing the sketch light fitting complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing 3mm thick industrial plastic laminated sheet duly cut for fixing switch piano type, switch socket combination etc of the following size complete all as specified and as directed :- Make : Super hylem or equivalent approved make.
Supply and fixing as in repair MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. Make : C&S /Legrand/ Havells/L&T.
Supply and fixing as in repair MCB 40 Amps to 63 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. Make : C&S /Legrand/ Havells/L&T.
Supply and fixing as in repair MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. Make : C&S /Legrand/ Havells/L&T.
Supply and fixing in repair MCB 40 Amps to 63 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed by the Engr-in-Charge. Make : C&S /Legrand/ Havells/L&T.
Supply and fixing as in repair SPN MCB DB 8 way with 200 Amps rated bus bar, neutral link, dinrail suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and as directed by the Engr-in-Charge. Make : C&S /Legrand/ Havells/L&T.
Supply and fixing in repair SPN MCB DB 4 way with 200 Amps rated bus bar, neutral link, dinrail suitable for mounting MCB's 240 volts double door type as in repair of Busbar for distribution of power and light circuit including taking down old bus bar box and making good the disturbed surface complete all as specified and as directed by the Engr-in-Charge. Make : C&S /Legrand/ Havells/L&T
Supply and fixing as in repair SPN MCB DB 2 way suitable for mounting MCB's 240 volts single door type including taking down old one and making good the disturbed surface complete all as specified and as directed by the Engr-in-Charge. Make : C&S /Legrand/ Havells/L&T
Dressing/rearranging of electric wiring in casing caping/PVC conduit pipes by replacing fixing screws, saddles , wooden gutties etc as per site requirement and complete all as specified and as directed by the Engr-in-Charge.
Taking down switch board of any description and refixing properly with wooden gutties, screws etc complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing as in repair for AC power supply unit 6 module consisting of in built starter, plug top, isolator and box complete all as specified and as directed by the Engr-in-Charge. Make : North West, Model ACPU 6 M-BT or equivalent approved make.
Supply and fixing in repair LED tube light fitting 4 ft 20 watt, Neutral white 230 volt energy efficient comprises of extruded aluminum housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
All as per item No 164 above but LED tube light of warm White LED complete all as specified and as directed by the Engr-in-Charge.
All as per item No 164 above but LED tube light of 2 ft and 1 x 10 Watt LED lamp complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with inbuilt driver and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing LED strip light in cover 5W, CCT 6500K, IP 65, having efficacy 100 lm/W , 220 V AC decorative type with inbuilt driver and LED lamp including electical connection complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing recessed type LED spot light 12W, warm white, IP 20, having efficacy 100 lm/W , 220 V AC with inbuilt driver and LED lamp including electical connection complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing recessed type LED round ceiling light 22W, warm white, IP 20, having efficacy 100 lm/W , 220 V AC with inbuilt driver and LED lamp including electical connection complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing recessed type LED round ceiling light 15 W, warm white, IP 20, having efficacy 100 lm/W , 220 V AC with inbuilt driver and LED lamp including electical connection complete all as specified and as directed by the Engr-in-Charge.
Supply and fixing recessed type LED square ceiling light 12 W, warm white, IP 20, having efficacy 100 lm/W , 220 V AC with inbuilt driver and LED lamp including electical connection complete all as specified and as directed by the Engr-in-Charge.
ESS PEE UDYOG
SOMANI BUILDERS
SREE GURU CONSTRUCTION CO
SUDHA ENTERPRISES
AUTO ELECTRICALS
KWALITY CONSTRUCTION
BHARUKA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .