Annual contract for Miscellaneous civil works in Various Places in HAL Township area Nashik

HINDUSTAN AERONAUTICS LIMITED AIRCRAFT OVERHAUL DIVISION, NASIK WORKS AND SERVICES DEPARTMENT

Name of work: Annual contract for Miscellaneous civil works in Various Places in HAL Township area, Nashik

Tender No.:NK/FW/C-1639/2025-26

NIT NO. : NK/FW/577/2025-26

Estimate Value : ₹ 99.93 Lakhs

PRICE BID/ COMMERCIAL BID PART-B

Name of the Tenderer:

Sl. No Specification Unit Quantity Rate in Figs [Excluding GST] Rate in words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The tenderer shall abide by prevailing GST act. (2) This BOQ specifications have to be read in conjunction with detailed technical specification and tender drawings if any. (3) The quoted percentage for the works mentioned below, shall be taken into consideration for evaluation of the tender. The lowest offer (L-1) will be determined considering the total amount including GST based on the quoted percentage.

1 Dismantling doors, windows (steel or wood) shutters, ventillators including chowkhats, holdfasts etc. complete from stone, concrete or brick surrounds of any thickness or size, carefully hacking out old putty or removing beads of glass etc., including making good breakages in taking out and handling, transporting & depositing to Civil store and properly stacking for reuse complete all as directed by EIC- Of area 3 sq. metres and below . Nos. 50.00 336.08 Rupees Three Hundred Thirty Six and Eight Paise Only 16804.00

2 Taking down/ removing the existing Aluminium/Gypsum partitions, doors, windows, ventilators, fixed glazing & false ceiling of any type and size including removing the glass/ particle board, hold fasts/screws as required, including transporting & depositing to the Civil stores or stacking at site for re-use etc. complete as directed by EIC. Sqm 50.00 51.57 Rupees Fifty One and Fifty Seven Paise Only 2578.50

3 Dismantling structural steel at any height and position including taking out carefully, transporting & depositing to Civil stores, complete as directed by EIC. Kg 250.00 5.17 Rupees Five and Seventeen Paise Only 1292.50

4 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads(i.e. carriage of 5 km lead) including all lifts involved complete all as specified & as directed by EIC. Cum 150.00 241.58 Rupees Two Hundred Forty One and Fifty Eight Paise Only 36237.00

5 Cutting holes upto 30 x 30 cm in floors, walls and roofs of any description for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc., including making good the same with proper finishing complete so as to make it leak proof etc. complete, as directed by EIC. No. 200.00 381.48 Rupees Three Hundred Eighty One and Forty Eight Paise Only 76296.00

6 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete as directed by EIC Sqm 200.00 3.16 Rupees Three and Sixteen Paise Only 632.00

7 Dismantling floor or wall tiling including cement mortar bedding, removing & returning serviceable tiles to store and rubbish off the premises all as specified & as directed by EIC. Sqm 100.00 67.18 Rupees Sixty Seven and Eighteen Paise Only 6718.00

8 Demolishing carefully the existing brick masonry of any size, type and at any position, built in cement mortar , necessary scaffolding, temporary supports as required at site complete including disposal of debris to a distance of 50 metre outside shop area/work site for further disposal etc. complete as directed by EIC. Efforts shall be made to prevent dust by arranging proper covering. (Care shall be taken to prevent damages to the service lines/cables and on identification of any service lines/cables the shall be notified to Engineer In Charge for instructions on such matters. In case of accidental breakages the same shall be made good by the contractor at his cost.) Cum. 100.00 1885.61 Rupees One Thousand Eight Hundred Eighty Five and Sixty One Paise Only 188561.00

9 Demolishing carefully the existing Stone masonry of any size, type and at any position, built in cement mortar , necessary scaffolding, temporary supports as required at site complete including disposal of debris to a distance of 50 metre outside shop area/work site for further disposal etc. complete as directed by EIC. Efforts shall be made to prevent dust by arranging proper covering. (Care shall be taken to prevent damages to the service lines/cables and on identification of any service lines/cables the shall be notified to Engineer In Charge for instructions on such matters. In case of accidental breakages the same shall be made good by the contractor at his cost.) Cum 20.00 2250.56 Rupees Two Thousand Two Hundred Fifty and Fifty Six Paise Only 45011.20

10 Demolishing cement concrete of any description manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Cum. 25.00 1802.07 Rupees One Thousand Eight Hundred Two and Seven Paise Only 45051.75

11 Demolishing carefully the existing reinforced cement concrete of any description and in any position including cutting the reinforcement wherever required, including trimming the sides and stacking at site for further disposal complete as directed by EIC. Cum 10.00 3250.30 Rupees Three Thousand Two Hundred Fifty and Thirty Paise Only 32503.00

12 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches, drains or like (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lifts , including getting out the excavated soil and disposal of surplus excavated soil , within a lead of 50 m all complete and as directed by EIC. Note: Soil, if any, which is required for refilling shall be stacked at site as per the directions of EIC.

a) All kinds of soil Cum 100.00 238.24 Rupees Two Hundred Thirty Eight and Twenty Four Paise Only 23824.00

b) Ordinary rock Cum 5.00 579.31 Rupees Five Hundred Seventy Nine and Thirty One Paise Only 2896.55

c) Hard rock (Blasting Prohibited) Cum 2.00 1393.98 Rupees One Thousand Three Hundred Ninety Three and Ninety Eight Paise Only 2787.96

13 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift as directed by Engineer-in-charge.

a) All kinds of soil Cum 50.00 162.46 Rupees One Hundred Sixty Two and Forty Six Paise Only 8123.00

b) Ordinary rock Cum 5.00 456.62 Rupees Four Hundred Fifty Six and Sixty Two Paise Only 2283.10

c) Hard rock (Blasting Prohibited) Cum 2.00 1311.51 Rupees One Thousand Three Hundred Eleven and Fifty One Paise Only 2623.02

14 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations, floors, etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by mechnical / power ramming/compacting and watering, lead up to 50m and lift upto 1.5m all complete as directed by EIC. Cum 20.00 179.39 Rupees One Hundred Seventy Nine and Thirty Nine Paise Only 3587.80

15 Supplying, stacking and filling murum (including royalty) in trenches, plinth, sides of foundation, floors,etc in layers not exceeding 20cm consolidating each deposited layer by mechnical / power ramming / compacting and watering, lead up to 50m and lift upto 1.5m all complete as directed by EIC. Cum 100.00 882.53 Rupees Eight Hundred Eighty Two and Fifty Three Paise Only 88253.00

16 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

a) W.C. pan with ISI marked white solid plastic seat and lid Each 65.00 5963.38 Rupees Five Thousand Nine Hundred Sixty Three and Thirty Eight Paise Only 387619.70

17 Providing and laying Vitrified tiles in floor in different sizes 9-10mm thick with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

a) Glazed Vitrified tiles Matt/Antiskid finish of size 600 x 600mm Sqm 700.00 1340.71 Rupees One Thousand Three Hundred Forty and Seventy One Paise Only 938497.00

b) Double charge vitrified tile of polish finish of size 600 x 1200mm Sqm. 500.00 1443.49 Rupees One Thousand Four Hundred Forty Three and Forty Nine Paise Only 721745.00

18 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Sqm 200.00 1018.40 Rupees One Thousand Eighteen and Forty Paise Only 203680.00

19 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints, laying to rise or falls etc. complete all as directed by EIC.

a) 300mm dia Rm 50.00 910.04 Rupees Nine Hundred Ten and Four Paise Only 45502.00

b) 450 mm dia Rm 30.00 1483.58 Rupees One Thousand Four Hundred Eighty Three and Fifty Eight Paise Only 44507.40

c) 600 mm dia Rm 30.00 2053.28 Rupees Two Thousand Fifty Three and Twenty Eight Paise Only 61598.40

20 Providing and rendering 18 mm thick cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge on fair faces of brick/stone masonry work or concrete surface including curing and finishing with straight edges, with necessary scaffolding for working at any height/level including finishing in small patches/isolated widths/bands etc complete as specified and as directed by EIC. Sqm 100.00 491.90 Rupees Four Hundred Ninety One and Ninety Paise Only 49190.00

21 Providing and rendering plain cement plaster 15mm in cement mortar 1:4 and providing neat cement finish including necessary preparation, cleaning, scaffolding, curing including isolated width all as specified and as directed by EIC. Sqm 100.00 365.60 Rupees Three Hundred Sixty Five and Sixty Paise Only 36560.00

22 Providing & Laying PCC/RCC 1:1.5:3 using 20 mm graded stone aggregate at any Position and level including mixing , placing, consolidating using mechanical vibrators etc. complete as specified and as directed by EIC. (Reinforcement & form work will be paid separately. The work also includes making pocket holes as required as per drawing)

a All work upto plinth level Cum 20.00 7634.00 Rupees Seven Thousand Six Hundred Thirty Four Only 152680.00

b All work above plinth level Cum 20.00 9479.79 Rupees Nine Thousand Four Hundred Seventy Nine and Seventy Nine Paise Only 189595.80

23 Providing & Laying PCC 1:2:4 using 20 mm aggregate as per requirement and as instructed by Engineer In Charge for foundations, flooring, base concrete, leveling course, etc. of any thickness including mixing , conveying and laying in any position to required level , consolidating by mechanical vibrators etc. as required at site as directed by EIC.

a All work upto plinth level Cum 10.00 7210.82 Rupees Seven Thousand Two Hundred Ten and Eighty Two Paise Only 72108.22

b All work above plinth level Cum 50.00 9056.62 Rupees Nine Thousand Fifty Six and Sixty Two Paise Only 452831.00

24 Providing and laying in position Mild steel High strength Thermo-mechanically Treated deformed (TMT) bars/Plain bars of grade Fe-500D or more of any dia, cutting to required length, bent to shape, hooking, cranking, bending spirally for hooping for columns, hooking ends and binding with and including annealed Mild steel wire not less than 0.90 mm dia or securing with clips including necessary lapping, spacers/cover blocks complete as specified and as directed by EIC. Kgs 500.00 98.71 Rupees Ninety Eight and Seventy One Paise Only 49355.00

25 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:

Cement Mortar 1:6 (1 cement : 6 coarse sand). Cum 60.00 5761.64 Rupees Five Thousand Seven Hundred Sixty One and Sixty Four Paise Only 345698.40

26 Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level. Sqm 50.00 792.29 Rupees Seven Hundred Ninety Two and Twenty Nine Paise Only 39614.50

27 Providing centering & formwork for plain or reinforced cement concrete straight, horizontal sloping as required including all cutting & waste centering bracing, strutting and removing the form after the retention period complete as specified & as directed by EIC/OIC for:

a) Foundation, footing, bases of column, raft and raft beams. Sides and soffits (if any) of foundation and plinth beams ; and similar work; vertical or to batter. Sqm 50.00 358.92 Rupees Three Hundred Fifty Eight and Ninety Two Paise Only 17946.00

b) Formwork to faces of walls, retaining walls ,abutment, parapets and staircase railings and similar work including attached pillasters, buttresses etc., vertical or to batter. Sqm 30.00 771.10 Rupees Seven Hundred Seventy One and Ten Paise Only 23133.00

c) Suspended floors, roofs, landings, balconies and access platform Sqm 30.00 848.67 Rupees Eight Hundred Forty Eight and Sixty Seven Paise Only 25460.10

28 Providing and laying factory made Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge.

a)60mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern Sqm 400.00 957.04 Rupees Nine Hundred Fifty Seven and Four Paise Only 382816.00

b)80mm thick Cement concrete paver block of M-35 grade with approved colour, design & pattern. Sqm 500.00 999.00 Rupees Nine Hundred Ninety Nine Only 499500.00

29 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers, round bar/ flat as required complete as per the direction of Engineer-in-charge. Sqm 500.00 1051.86 Rupees One Thousand Fifty One and Eighty Six Paise Only 525930.00

30 Providing, fabricating, hoisting & errecting in position structural steel work made out of beams,channel, angle, tee, flats, plates etc. welded or bolted type for work of roof trusses, purlins, bracing as per existing design necessary connection such as cleats, base plates, nutbolts, holding down bolts, welding, drilling, threading & including cutting ,welding, drilling, notching, etc & over a zinc chromate primer complete as specified as directed by EIC. Kg 500.00 122.37 Rupees One Hundred Twenty Two and Thirty Seven Paise Only 61185.00

31 Providing and fixing aluminium anodized work for partitions, doors, windows, ventilators of any approved colour, including cutting, fabrication , fixing with necessary screws/fasteners, providing & fixing wool pile, joining cleat in line, screws/fasteners & fixture etc not measured sepratly in Kg) level etc. complete as directed by EIC. Kg 400.00 453.10 Rupees Four Hundred Fifty Three and Ten Paise Only 181240.00

32 Providing and fixing in position the following windows/doors fittings as specified and as directed by EIC.

a) Supplying and fixing of Bearing wheel of approved make for sliding window complete as specified and as directed by EIC. Nos 100.00 30.00 Rupees Thirty Only 3000.00

b)Supplying and fixing of Lock of approved make for sliding window complete as specified and as directed by EIC. Nos 50.00 50.00 Rupees Fifty Only 2500.00

c)Supplying and fixing 300mm long aluminium aldrop complete as specified and as directed by EIC. Nos 50.00 277.55 Rupees Two Hundred Seventy Seven and Fifty Five Paise Only 13877.50

d) Providing and fixing ISI marked oxidised M.S. door latches of size 300 x 20 x 6 mm, conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378), as directed by EIC Nos. 50.00 90.02 Rupees Ninety and Two Paise Only 4501.00

e)Supplying and fixing 200mm aluminium tower bolt complete as specified and as directed by EIC. Nos 50.00 91.25 Rupees Ninety One and Twenty Five Paise Only 4562.50

f)Supplying and fixing 125mm aluminium handles complete as specified and as directed by EIC. Nos 50.00 60.64 Rupees Sixty and Sixty Four Paise Only 3032.00

g)Supplying and fixing 100mm SS butt hinges complete as specified and as directed by EIC. Nos 20.00 108.18 Rupees One Hundred Eight and Eighteen Paise Only 2163.60

h)Door lock with six levers ( Verticle Type), brass-100 mm fixing to aluminium door, of approved quality etc. complete as directed by EIC. Nos 50.00 795.31 Rupees Seven Hundred Ninety Five and Thirty One Paise Only 39765.50

33 Providing & fixing in position 4 to 5 mm thick (weight from 10 to 12.5kg/Sqm)approved brand sheet glass panel with as required , including providing nylon gasket of approved make fixing to frames to window shutters etc all as complete & directed by EIC. Sqm 50.00 2215.95 Rupees Two Thousand Two Hundred Fifteen and Ninety Five Paise Only 110797.50

34 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete as directed by EIC. Sqm 50.00 859.61 Rupees Eight Hundred Fifty Nine and Sixty One Paise Only 42980.50

35 Providing and fixing 12 mm thick prelaminated particle boards, interior grade, prelamited both sides with decorative choice laminations for doors, windows, ventilators, partitions etc. complete all as directed and specified by EIC. (ISI brand) Sqm 100.00 2940.44 Rupees Two Thousand Nine Hundred Forty and Forty Four Paise Only 294044.00

36 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Sqm 50.00 1741.68 Rupees One Thousand Seven Hundred Forty One and Sixty Eight Paise Only 87084.00

Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

37 Providing and fixing Solar control/ decorative film partly transperent/ opaque etc. all as specified & directed by EIC. Sqm 50.00 600.00 Rupees Six Hundred Only 30000.00

38 Providing and fixing samru american black out italia horizontal roller venetion blind with palmet etc all as specified & directed by EIC. Sqm 50.00 2400.00 Rupees Two Thousand Four Hundred Only 120000.00

39 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete as directed by EIC, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x0.90 mm M.S. laths with 0.90 mm thick top cover. Sqm 25.00 2920.90 Rupees Two Thousand Nine Hundred Twenty and Ninety Paise Only 73022.50

40 Extra over the item no. 39 for providing mechanical device chain and crank operation for operating rolling shutters.

a Exceeding 10.00 sqm and upto 16.80 sqm in the area. Sqm 30.00 1172.76 Rupees One Thousand One Hundred Seventy Two and Seventy Six Paise Only 35182.80

b Exceeding 16.80 sqm in area. Sqm 25.00 1081.65 Rupees One Thousand Eighty One and Sixty Five Paise Only 27041.25

41 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer etc. complete as directed by EIC. Sqm 25.00 10470.14 Rupees Ten Thousand Four Hundred Seventy and Fourteen Paise Only 261753.50

42 Providing and fixing 30 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) including ISI marked Stainless Steel butt hinges of suitable size conforming to IS:12817 , heavy duty with necessary screws, non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters etc. complete as per direction of Engineer-in-Charge. Sqm 50.00 1988.02 Rupees One Thousand Nine Hundred Eighty Eight and Two Paise Only 99401.00

43 Providing and fixing 200 mm stainless steel fancy design handle of approved make, fancy design fixed with Stainless Steel screws etc. complete as per direction of Engineer-in-charge. Each 50.00 170.83 Rupees One Hundred Seventy and Eighty Three Paise Only 8541.50

44 Providing and fixing 250x16x5 mm bright finished brass door latch /aldrop of approved make fixed horizontal or vertical with necessary screws etc. complete as per direction of Engineer-in-Charge. Each 75.00 281.90 Rupees Two Hundred Eighty One and Ninety Paise Only 21142.50

45 Providing & fixing in position colour coated corrugated galvalume sheet of 0.50 mm thick (total coated thickness) having high tensile strength of 550 mpa, with metallurgical coating of zinc aluminium alloy of 150 grams /Sqm (AZ 150) (both side inclusive ) conforming to ASTM -792 & AS 1397 & sheet shall be fastened with 40μm zinc coated or 25μm zinc-tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners with neoprene/EPDM washers. The sheet will have coating of minimum 20 microns of painting over corrosion inhibiting primer (min 5 micron) on top side & standard backing coat on reverse side. All penetrations and laps shall be sealed with silicon or equivalent sealants while laying the sheet. End overlap wherever required shall be minimum 150 mm & side lap are full rib as per manufacture catalogues. Sqm 20.00 950.00 Rupees Nine Hundred Fifty Only 19000.00

46 Providing & Fixing only in position Decorative wooden veneer, green lam or equivalent make (one side) 4mm thk. of approved brand, shade and colour for wall paneling fixed on plywood/ walls as directed with nails , screws , applying necessary polysynthetic resin adhesive wherever required/as directed including necessary scaffolding, cutting to reuired size and shape, bands etc. as per requirement / drawings complete all as specified and as directed by EIC. Sqm 50.00 1781.31 Rupees One Thousand Seven Hundred Eighty One and Thirty One Paise Only 89065.50

47 Providing and Fixing in position 1 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive on wall as directed , including necessary scaffolding, cutting to required size and shape, bands etc. as per requirement / drawings complete all as specified and as directed by EIC. Sqm 50.00 821.26 Rupees Eight Hundred Twenty One and Twenty Six Paise Only 41063.00

48 Providing and Fixing in position 12mm thick plywood with nails , screws of grade BWR (ISI-303) of approved brand & quality on wall as directed , including necessary scaffolding, cutting to required size and shape, bands etc. as per requirement / drawings complete all as specified and as directed by EIC Sqm 50.00 1309.00 Rupees One Thousand Three Hundred Nine Only 65450.00

49 Providing and Fixing in position 18mm thick plywood with nails , screws of grade BWR (ISI-303) of approved brand & quality on wall as directed , including necessary scaffolding, cutting to reuired size and shape, bands etc. as per requirement / drawings complete all as specified and as directed by EIC Sqm 50.00 1366.29 Rupees One Thousand Three Hundred Sixty Six and Twenty Nine Paise Only 68314.50

50 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

a) White solid plastic seat with lid Nos 65.00 626.81 Rupees Six Hundred Twenty Six and Eighty One Paise Only 40742.65

51 Providing and laying in position polished Granite stone Black, Cherry/ Ruby red or equivalent in flooring,steps,sills, etc. of required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Sqm 50.00 4101.52 Rupees Four Thousand One Hundred One and Fifty Two Paise Only 205076.25

52 Providing edge moulding to 18 mm thick to granite including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Rmt 50.00 467.65 Rupees Four Hundred Sixty Seven and Sixty Five Paise Only 23382.50

53 Providing and fixing White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps, brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required etc. complete as per direction of Engineer-in-Charge. Nos 50.00 2424.37 Rupees Two Thousand Four Hundred Twenty Four and Thirty Seven Paise Only 121218.50

54 Providing and fixing Rectangular shape 1500x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board backing fixed to wooden cleats with C.P. brass screws and washers complete etc. complete as per direction of Engineer-in-Charge. Each 50.00 1915.63 Rupees One Thousand Nine Hundred Fifteen and Sixty Three Paise Only 95781.50

55 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia .Pipes. RM 40.00 455.55 Rupees Four Hundred Fifty Five and Fifty Five Paise Only 18222.00

20 mm nominal outer dia .Pipes. RM 35.00 492.04 Rupees Four Hundred Ninety Two and Four Paise Only 17221.40

25 mm nominal outer dia .Pipes. RM 25.00 574.09 Rupees Five Hundred Seventy Four and Nine Paise Only 14352.25

32 mm nominal outer dia .Pipes. RM 25.00 676.65 Rupees Six Hundred Seventy Six and Sixty Five Paise Only 16916.25

56 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work

40 mm nominal outer dia. Pipes. RM 45.00 515.33 Rupees Five Hundred Fifteen and Thirty Three Paise Only 23189.85

57 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

b) 110 mm dia pipes RM 45.00 345.41 Rupees Three Hundred Forty Five and Forty One Paise Only 15543.45

58 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

(a) 15 mm nominal dia Nos 34.00 6352.55 Rupees Six Thousand Three Hundred Fifty Two and Fifty Five Paise Only 215986.70

Sub-Total (Excluding GST) Rupees Eighty Four Lakh Sixty Eight Thousand Nine Hundred Seventy Five and Thirty Five Paise Only 8,468,975.35

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Basic Amount Put to Tender Select Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 8,468,975.35 BELOW % 8,468,975.35

Add 18% GST Rupees Fifteen Lakh Twenty Four Thousand Four Hundred Fifteen and Fifty Six Paise Only 1,524,415.56

Grand Total (Including GST) Rupees Ninety Nine Lakh Ninety Three Thousand Three Hundred Ninety and Ninety One Paise Only 9,993,390.91

Note: (i) The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered. (ii) The quoted rates in the bill of quantities are inclusive of all types of taxes, duties levies, fees and charges etc., imposed by Central/ State Govt. and local bodies Compensation Cess, Labour Cess (if any), Custom Duty, royalties and other levies. It shall also include all other costs including loading, un-loading, insurance, transportation, testing and Certification expenses except GST . GST at the prevailing percentage is added in the BOQ at the end. (iii) While tendering, the contractors do not have to write the rate or estimated cost of each item, but a percentage figure by which the estimate unit rates are to be increased or decreased to be quoted by the contractor and the same percentage figure being applicable to all the items. (iv) In the case of percentage rate tender, the tenderers are required to quote their percentage below/above the rates in the price Bid. In the event of arithmetical error, the quoted percentage will be taken into account for evaluation not the amount. Accordingly corrections will be incorporated in the comparative statement. (v) In case the lowest tendered amount (estimated cost + amount worked on the basis of percentage above/below) of two or more contractors is same, such lowest contractors will be asked to submit sealed revised offer in the form of letter or through e-portal mentioning percentage above/ below on estimated cost of tender including all sub sections/sub heads as the case may be, but the revised percentage quoted above/below on tendered cost or on each sub section/ sub head should not be higher than the percentage quoted at the time of submission of tender. The lowest tender shall be decided on the basis of revised offers. (vi) In case any of such contractors refuses to submit revised offer, then it shall be treated as withdrawal of his tender before acceptance and 50% of earnest money shall be forfeited. If the revised tendered amount of two more contractors received in revised offer is again found to be equal, the lowest tender, among such contractors, shall be decided by draw of lots in the presence of Tender opening committee. (vii) In case all the lowest contractors those have quoted same tendered amount, refuse to submit revised offers, then tenders are to be recalled after forfeiting 50% of EMD of each contractor. Contractor(s), whose earnest money is forfeited because of non submission of revised offer, shall not be allowed to participate in the re-tendering process of the work.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

AIRCRAFT OVERHAUL DIVISION, NASHIK

Pre-Qualification Profile

Tender Ref No. or Contract No.: NK/FW/C-1639/2025-26

Tender Notice no.: NK/FW/577/2025-26

Name of Work: Annual contract for Miscellaneous civil works in Various Places in HAL Township area, Nashik

Estimated Amount in ₹ Lakhs: 99.93

Contract Period in Months 10

Earnest Money Deposit (EMD) in ₹ 199900.00

Name of the Individual / Firm / Company: * Mandatory

Sl.No Description Details Remarks

1.0 Essential/ Prequalification Criteria

1.1 Annual Turnover: Average annual financial turnover during the last 3 years, ending 31.03.2024 should be at least 30% of the approximate estimated amount put to tender. (i.e ₹ In Lakhs) 30.00

Financial YEAR Turn over (Rs. In Lakhs) Remarks

2021-22 Profit & loss statement duly certified by chartered accountant with UDIN shall be considered for evaluation of turnover for the respective financial Year.

Average Annual Turnover of last Three Financial Years Rs. 0.00 Not meeting eligible criteria

1.2 Solvency : The solvency required will be 40% of the approximate estimated amount put to tender. The solvency certificate shall be from a nationalized or scheduled bank and issued within a period of 12 Months from the final date of submission of the tender i.e ₹ In Lakhs 40.00

Name of Bank & Branch Issued Related Document to be Uploaded to eProcurement Portal.

Date of Issue [DD-MM-YYYY]:

Value (₹ In Lakhs) Not meeting eligible criteria

1.3 Experience Experience of having successfully completed similar works(Refer NIT "Work Details") during last 7 years ending on the previous day of last day of submission of tender should be either of the following: [Latest work experience certificate may be uploaded] a) Three similar completed works each costing not less than the amount equal to 40% of the approx. estimated amount put to tender against each work in the tender notice. (Or) b) Two similar completed works each costing not less than the amount equal to 50% of the approx. estimated amount put to tender against each work in the tender notice. (Or) c) One similar completed work costing not less than the amount equal to 80% of the approx. estimated amount put to tender against each work in the tender notice.

Completed similar works during last 7 years 40% (Three Works) Drop down and Select No.of works

Work No I Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal. (Refer NIT clause 1.3 for details)

Brief Description of Work:

Completed value of Work in ₹ Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No II Type of Work: [Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal. (Refer NIT clause 1.3 for details)

Brief Description of Work:

Completed value of Work in ₹ Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal. (Refer NIT clause 1.3 for details)

Brief Description of Work:

Completed value of Work in ₹ Lakh:

Date of Commencement of Work [DD/MM/YYYY]:

Date of Actual Completion of Work[DD/MM/YYYY]:

1.4 GST No Registration Number. Related Document to be Uploaded to eProcurement Portal. (GST Registration certificate )

1.5 ESIC Registration Number Related Document to be Uploaded to eProcurement Portal. (ESIC registration certificate issued on or before last date of online tender submission date)

1.6 EPF Registration Number Related Document to be Uploaded to eProcurement Portal. (upload EPF registration certificate and required to comply with the provisions of PF act, and as Refered in NIT clause 1.6)

1.7 Earnest Money Deposit (EMD) details in ₹ Scanned copy of EMD payment to be Uploaded to eProcurement Portal. (Refer NIT clause 1.7 for details)

1.80 License: License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies. Not Applicable Related Document to be Uploaded to eProcurement Portal. (Refer NIT clause 1.8 for details)

B Documents to be uploaded along with tender

2.1 Constitution, legal status along with attested copies of Deeds / Articles and Memorandum of Association, etc., as applicable. Related Document to be Uploaded to eProcurement Portal.

Type of ownership

If Other, please specify

2.2 Power of Attorney in case of Pvt. Limited/limited companies Related Document to be Uploaded to eProcurement Portal.

2.3 Details of person holding the power of Attorney.

Name Related Document to be Uploaded in eProcurement Portal. (Original /Attested / Notarized)

Ph. No. with STD code

2.4 Registration with HAL/ Other organization if any. Related Document to be Uploaded to eProcurement Portal.

2.5 Copy of PAN card issued by Income tax authority Related Document to be Uploaded to eProcurement Portal.

2.6 I.T Returns for past 03 years (Assesment Year)

2022-23 Related documents to be uploaded in eprocurement portal.

2.7 Details of ECS viz.,where payments are to be credited along with the scan copy of Blank Cheque leaf

Blank Cheque leaf Blank Cheque leaf to be Uploaded in eProcurement Portal.

Bank Account No. ECS Bank details as per Annexure in tender documents , signed and sealed by concerned bank to be Uploaded to eProcurement Portal.

Name of the Bank

Type of Account

2.8 Udertaking Annexure-K Related Document to be Uploaded to eProcurement Portal.

2.9 Address for correspondence:

2.10 Contact details

Contact person name

Ph. No. with STD code

FAX No. with STD code

3.0 Acceptance by party for Scope of work as per BOQ and Tender terms & conditions Accepted

4.0 DECLARATION

a The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions (Page 1 to 175) including price bid do hereby accept all the terms and conditions laid down. Accepted

b I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Accepted