Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.6 LAccepted-Finance | L1 | Accepted-Finance Found Correct | |
| 2 | L2₹11.6 L+₹2,791.80 (0.24%)Accepted-Finance | L2 | Accepted-Finance Found Correct | |
| 3 | L3₹12.7 L+₹1.1 L (9.81%)Accepted-Finance | L3 | Accepted-Finance Found Correct |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DFO Ramban
Near BVM School Ramban
boq
2022_FD_190818_1
e Nit 47 of 2022-23
Open Tender
Agricultural or Forestry
Item Wise
30 days
Gool
tender document
2 documents required · 2 mandatory
₹600
DFO Ramban
₹24,000
25 Oct 2022
1 Oct 2022
18 Oct 2022
1 Oct 2022
17 Oct 2022
1 Oct 2022
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:All kinds of soil.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) including all leads lift carriage complete job
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) with 20% boulders including all leads lift carriage complete job
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all leads lift carriage complete job
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more (To be paid as per actual). including all leads lift carriage complete job
Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for half Brick masonry in superstructure above plinth level upto floor V level. including all leads lift carriage complete job
Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns
Suspended floors, roofs, landings, balconies and access platforms
Edges of slab Slab
15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement 4 fine sand including all leads lift carriage complete job
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.50mm thick with 20 mm nominal size stone aggregate. including all leads lift carriage complete job
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all leads lift carriage complete job
Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing 20mm thick wooden planks ceiling with M.S. screw first class kail/ deodar wood. Excl cost of wood (wood provided by forest department)
Providing and fixing 20mm thick wooden planks wall panelling with M.S. screw first class kail wood/ deodar wood . Excl cost of wood (wood provided by forest department)
Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled M.S. but hinges with necessary screws excluding, panelling which will be paid for separately. Deodar/ Kail wood excl cost of wood (wood provided by forest department)
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled M.S. but hinges with necessary screws excluding, panelling which will be paid for separately. 12mm thick ply board of approved brand ISI marked. excl cost of wood
Providing and fixing 30 mm thick glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood. excl cost of wood
Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood. excl. cost of wood
Providing & fixing in position 4mm thick glass panes, with wooden fillets incl. screws in wooden doors, windows, cleestory windows, all complete with.
Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc.
Providing, Hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
Painting with synthetic enamel paint of approved brand and manufactureto give an even shade.Two or more coats on new work
Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work
Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete: 250x10 mm
Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete: 100x10 mm
Providing and fixing ISI marked oxidized M.S. Slid door bolt nuts and screw etc 250 x 16mm
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete:- 125 mm
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete:- 100 mm
Providing and fixing aluminum Eye Hook Latch, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper
Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. Complete
Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid,10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:W.C. pan with lSI marked white solid plastic seat and lid. (Hindware/Jackware/Cera/Euro/Periware/Mok & Dek)
Providing and fixing Stainless Steel A lSI 304 (18/8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink without drain board 470x420mm bowl depth 178mm
Providin and fixing 8 mm dia CP/SS jet with flexible tube upto 1 m long with SS triangular plate to European type WC of quality and make as approved by Engineer- in - charge (Hindware/Jackware/Cera/Euro/Periware/Mok & Dek
Providing and fixing 600x450 mm bevelled edge mirror ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. (Hindware/Jackware/Cera/Euro/Periware/Mok & Dek)
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.(Hindware/Jackware/Cera/Euro/Periware/Mok & Dek)
Providing and fixing PTMT liquid soap container 109 mmwide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (Hindware/Jackware/Cera/Euro/Periware/Mok & Dek)
P/F electric Geyser of approved brand and make of 35 Litres capacity each with necessary fittings(complete job) (Hindware/Jackware/Cera/Havells)
Providing and fixing 600x120x5mm glass shelf with edges round of supported an anodised aluminium angle frame with C.P. brass brackets and gurd rail comlete fixed with 40mm long screws, rawl, plugs etc complet
Providing and fixing C.P brass long nose bib cock of approved quality confirming to IS standards and weighing not less than 810gms:- 15mm nominal bore. (Cera/ Jaquar/Essess/Resp./Euro / Marck)
Providing and fixing C.P brass stop cock (concealed) of standard design and of approved quality make confirming to IS: 8931:- 15mm nominal bore. Cera/ Jaquar/Essess/Resp./Euro / Marck)
Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:550x400 mm with single 15 mm C.P. brass pillar taps (Hindware/Jackware/Cera/Euro/Periware/Mok & Dek)
Providing and fixing white vitreous china water closet squatting pan (Indian type) 18.14.1 Long pattern W.C. pan of size 580 mm
Providing and fixing C.P brass close hole basin mixer pillar tap of aproved quality make, weighing not less than 1.97 kg: 15mm nominal bore. Cera/ Jaquar/Essess/Resp./Euro / Marck)
Providing and fixing PTMT grating of approved qualkity and colourcircular type 100 mm nominal dia
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete. Flexible pipe 32 mm dia
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms.
Providing and fixing C.P. brass angle valve for basin/ wall mixer and geysers points of approved make conforming to IS : 8931 15 mm nominal bore of make hindware/Cera/Jaquar or as approved by site incharge (With all Carriages)
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank incl all fittings nipple/ union etc.
Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Rectangular shape 600x450 internal dimension
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall medium 15 mm dia. nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall medium 20 mm dia. nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall medium 25 mm dia. nominal bore
Providing and laying in position, vertically and horizontally selfit/ ringfit SWR PVC pipes (45kg/sqcm) as per IS: 13592 with leatest ammendments, incliding jointing and with SWR moulded fittings, using solvent cement to 3592 with leatest ammendments, incliding jointing and with SWR moulded fittings, using solvent cement to form a pavement water tight joint. Finolex/ supreme/Prince or equivalent make (finished item to be measured and paid for vertical pipes to be ancassed with wire chiken mesh) 75 mm (3") dia
Providing and laying in position, vertically and horizontally selfit/ ringfit SWR PVC pipes (45kg/sqcm) as per IS: 13592 with leatest ammendments, incliding jointing and with SWR moulded fittings, using solvent cement to 3592 with leatest ammendments, incliding jointing and with SWR moulded fittings, using solvent cement to form a pavement water tight joint. Finolex/ supreme/Prince or equivalent make (finished item to be measured and paid for vertical pipes to be ancassed with wire chiken mesh) 110 mm (4") dia
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Plain bend 75mm (3") dia
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Plain bend 110mm (4") dia.
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Door bend 75mm (3") dia
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Door bend 110mm (4") dia
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Plain Tee 75mm (3") dia
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Plain Tee 110mm (4") dia.
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Vent Cowl 75mm (3") dia
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Vent Cowl 110mm (4") dia.
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Reducer 110mm x 75mm (4"x3")
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Coupler 75mm (3")
Supplying and fixing of SWR moulded fittings for sanitary and drainage pipes, as per IS: 14735-1999 with leatest amenments, selfit/ ringfit fittings (450 kg/sqcm) finolex/supereme/Prince or equivalent make. Coupler 110mm (4")
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sqm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch modular plate suitable G.I Box and earthing the point with 1.5 sqm FRLS PVS insulated copper conductor single core cable etc. as required (GROUP C) incl MCB etc all complete
Wiring for heating point with 4.0 sqm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch modular plate suitable G.I Box and earthing the point with 4.0 sqm FRLS PVS insulated copper conductor single core cable etc. as required (GROUP C). all complete incl MCB
Providing, installation, testing, warrenty of ISI certified Inverter Capacity 1200 - 1500 VA, Battery Capacity :Voltage - 12 Volt, Capacity - 150 Ah, Tall tubular inverter battery, Sine wave inverter, Intelligent Home UPS with 32 bit DSP Processor, Back-up & battery charging based on load supply and requirements also warrenty as per company all complete at site
Actual carpenter engaged for framing of wooden Almirah/ wardrobes for Bed Rooms & Kitchen, and Bed (wood provided by forest department) subjectde to actual
shabeer ahmed
FARHAT RAFIQ CONTRACTORS AND LABOUR SUPPLIERS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .