Work of installing decorative lights for lighting on the jetty located at Boating.

Supply, Installation, Testing and Commissioning of 60W single arm street lighting system withangular bracket mounted at 30°, installed on a 3 to 4 meter high mild steel pole of 100mm x 100mm square section, designed as per structural requirements considering bracket type and loading factors. The pole shall have all sections welded using special V-groove technique by certified welders employing high-end MIG welding process, and shall be provided with a built-in control box having a service door fitted with vandal-resistant, loss-proof screws. The control gear tray shall be prewired with MCB and terminal connectors for loop-in/loop-out arrangement. The base plate shall be fabricated from steel grade E250 with elongated foundation bolt holes for fine alignment during installation,using foundation bolts of grade 4.6.The system shall include LM-79 and LM-80 certified LED luminaire with high-efficiency LED module(voltage/current 39V–62V, 1050mA), 3000K colour temperature, CRI ≥70, luminous flux not less than 7158 lumens, power consumption not exceeding 60W, luminous efficacy ≥120 lm/W, operating temperature range –40°C to +50°C, Type III optics, IP68 protection for LED module, IK09 impact resistance, polycarbonate optical cover, and CE certification, complete with all accessories, connections, and necessary arrangements for proper installation and operation as required(with 2 year complete warranty).(M.R.)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade in existing RCC/Hume/Metal pipe as directed by Engineer in charge complete in all respect including excavation and refiliing. The armourting of the cable shall be properly connected with the earth conductor by clamps etc. UPPWD SOR 2024 20b.1

10 sq. mm 4 core

25 sq. mm 3-1/2 core

Supply and burring of Safe Earthing Electrode T-19 Zn-Zinc Coated, Length 3000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra). SOR/726B/2018. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required on site, complete in all respect. SOR/716/2018.

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. SOR/807/2018

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. SOR /504/2018.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting , jointing etc. in the existing trench/wall surface(using 4 clips/mtr), complete as required by E/I. Analysis Rate

40 mm dia( OD- 40mm &ID-32mm nominal)

50 mm dia(OD-50mm & ID-38mm nominal)

Construction of pole plinth size 750mmx300mmx300mm including RCC concrete M-25,12mm dia steel and 700mm length, & 250mmx250mm ring 8mm dia steel, complete in all respect (Analysis Rate, drawing attached).

Supply and fixing of chemical anchor system(Hilti HIT- RE 150 or Equvalent) including threaded rods of M16 X 300mm Lenght. 200mm below RCC. (Scope includes: drilling holes of required diameter & depth in RCC, PCC Work(300mmx300mmx100mm), supplying threaded rods (GI Rod), fixing to required embedment depth, alignment, curing, finishing, all consumable and labour. (4 bolts per pole ) Complete in all Respects as required by E/I. (ANALYSIS RATE).