PERIODICAL SERVICES TO CERTAIN BLDG EXTERNAL AND INTERNAL PLASTER, JOINERY WORKS, PLUMBING WORKS, SANITARY PIPES AND OTHER VARIOUR B/R WORK IN MD ACCN AND FINISHES TO BLDG UNDER AGE B/R-I AT GE HADDO, PORT BLAIR

Amount

Demolition of cement concrete as in block masonry built in cement mortar complete all as specified and directed.

Material and labour for pre-cast cement concrete block masonry with solid block, exc 10 cm width in PCC 1:3:6, type C1, using 20 mm graded stone aggregate built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick/ stone masonry wall including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Taking down of damaged, loosened cement concrete / cement mortar in walls / soffits / ceilings and similar structural members upto depth of 20 mm, cleaning the dismantled portion with wire brush etc., remove dust, dirt and other foreign particles etc., and washing with water with pressure and applying bonding agent on old concrete surfaces all as per manufacturer's instruction over prepared surfaces provide 20 mm thick High build polymer modified cement sand mortar 1:2.5 mixed with 10 litres (minimum) Nitobond SBR per 50 Kilogram of cement of M/s FOSROC chemical ( India ) Pvt Ltd or equivalent product of manufacturer all as per manufacturer's instruction including necessary scaffolding up to 12 m complete all as specified and directed.

Hacking out old broken glass any thickness, size, quality or description from wooden frames/ steel frame/ aluminium frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix Sheet glass 4.0 mm thick ordinary quality and glazing with aluminium glazing clip in aluminium window shutter exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square not exc 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix 4 mm thick figured glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square not exc 0.5 Sqm in each panes complete all as specified and directed.

Material and labour for resecuring or easing of door shutters for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing aluminium mongery exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Taking down door shutters and changing of unserviceable existing butt hinges and re-fixing in same opening including welding etc., if required, exc 1 Sqm and not exc 2 Sqm complete all as specified and directed.

Taking down aluminium door / window shutter including all fittings as sliding hinges, handle, lock, floor spring etc., any size and erected in position as indicated complete and refixing the same in position after the erection all as specified and directed.

Supply only for stainless steel friction sliding hinges (I-max hinges) suitable for aluminium window shutter all as specified and directed.

Supply only aluminium window shutter lock all as directed and specified by Engineer-in-charge.

Supply only for stainless steel floor spring for aluminium door shutter all as specified and directed.

Taking down shutters of any description not exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 sqm each with shutters (without taking off shutters from the frame ) and removing to store all as specified and directed.

Taking down chowkats or frames (without taking down Shutters from frame) size not exc 1.5 sqm each all as specified and directed.

Supply and fix bands, straps, support or stays for rainwater pipes etc., hold fasts and similar articles conforming to Fe 290 Gde -E-165 all as specified and directed.

Material and labour for second class hard wood plain solid straight chowkats and framed wrought framed on the solid rounded or chamfered put together with glue and pinned at joints including preservative chemical treatment all as specified and directed.

Material and labour for second class hard wood 35 mm thick plain framed panelled door shutters (any number of panels) with or veneered particle board medium density wood particle boards with commercial face supplied and fitted to chowkats all as specified and directed.

Supply and fix anodised aluminium frame for partitions, doors, windows, ventilators with one or more, rebates including joining cleat for fixing etc., complete all as specified and directed.

Supply and fix Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.50 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, 150 mm long (1 No) hinges type B-21, 100 mm long (2 Nos) suitable handle (1 No) complete all as specified and directed.

Supply and fix anodised aluminium grill of approved pattern all as specified and directed.

Material and labour for prelaminated particle board 18 mm thick (ISI marked), interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber, steel frame work as in shelves or shutters, panelling etc, fixed in repairs, complete all as specified and directed.

Material and labour for 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination in cup board shutters all as specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement in the frame at site as per specification and as directed.

Supply and fix solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, all as per specification and as directed.

Supply and fix 125 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 all as specified and directed.

Supply and fix for 300 mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, fixed complete all as specified and directed.

Supply and fix for 150 mm extruded aluminium alloy handles anodized complete all as specified and directed.

Supply and fix 200 mm aluminium anodised barrel tower bolts of extruded section all as specified and directed.

Supply and fix 300 mm long aluminium anodised sliding door bolt with hasp and staple (bolt type ) and fixing clips of sheet sliding bolts of extruded sections and fixing bolts and sliding bolts of extruded section all as specified and directed.

Supply and fix floor door stopper of aluminium alloy body and tongue with hard drawn steel spring, over all length 140 mm complete all as specified and directed.

Supply and fix in repairs, 300 mm long aluminium anodised sliding door bolt with hasp and staple (bolt type ) and fixing clips of sheet sliding bolts of extruded sections and fixing bolts and sliding bolts of extruded section all as specified and directed.

Supply and fix in repairs, floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor, 140 mm size, complete all as specified and directed.

Supply and fix in repairs, 300 mm aluminium anodised barrel tower bolts of extruded section all as specified and directed.

Supply and fix in repairs, 150 mm extruded aluminium alloy handles anodized complete all as specified and directed.

Supply and fix in repairs,125 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 all as specified and directed.

Supply and fix in repairs, 200 mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

Supply and fix in repairs, 150 mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

Supply only aluminium alloy wire cloth 0.45 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

Supply and fix in repairs, for aluminium alloy wire cloth 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and fix in repairs, anodised aluminium curtain rod decorative type powder coated 20 mm dia fixed including brackets complete all as specified and directed.

Fixing only in repairs, drapery rod with side bracket by drilling holes and using PVC rawl plug and brass screw complete all as specified and directed.

Supply and fix in repairs, aluminium (die cast) body, door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to1000 mm width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Supply and fix in repairs, drapery curtain rod wooden finish fancy type with fixing brackets steps, ends of 20 mm size and including brackets, stops etc, complete all as specified and directed.

Supply and fix in repairs, powder coated peg set of six hook fixed on wall / door shutter with chromium plated screws complete all as specified and directed.

Taking down AC / PVC pipe of any dia. complete all as specified and directed.

Supply and fix for 110 mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc., using synthetic rubber adhesive cement solvent complete all as specified and directed .

Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

Supply and fix for 75 mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed by Engineer -in-charge.

Supply and fix for 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

Cleaning of floor trap / Nahani trap / WC and removing blockage in Kitchen bath room including taking down grating & refixing with white cement all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

Supply and fix 20 mm bore tube medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

Supply and fix 15 mm bore tube medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed.

Supply and fix in repairs, polypropylene pipe outer diameter of pipe 20 mm 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., all fitting including all as specified and directed.

Supply and fix in repairs, polypropylene pipe outer diameter of pipe 25 mm 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., all fitting including all as specified and directed.

Supply and fix in repairs PVC valveless, syphonic action type flushing cistern of 10 litres capacity, white colour, with inlet, ball valve, float and handle including brackets all as specified and directed.

Supply and fix in repairs, flush pipe of polyethylene of low or high density or PVC 32 mm dia for flushing cistern all as specified and directed.

Supply and fix in repairs, white vitreous china wash down water closet pan, pedestal pattern with PVC seat cover with mild steel chromium plated or aluminised hinging device including connection to down pipe and flushing pipe all as specified and directed.

Supply and fix in repairs, wash hand basin vitreous china white, flat back of size 550 mm x 400 mm including 15 mm dia pillar cock , CI bracket, 15 mm dia PVC connection , 32 mm dia waste coupling and 32 mm dia PVC waste pipe 90 cm long etc., complete including taking down the existing wash hand basin all as specified and directed.

Material and labour in repairs, for 32 mm dia waste coupling fittings, brass, chromium plated for wash hand basin etc., with long screwed shanks and fly nut and bedded in red lead cement complete all as specified and directed.

Material and labour in repairs, for 40 mm dia waste coupling fittings, brass, chromium plated for kitchen sink with long screwed shanks and fly nut and bedded in red lead cement complete all as specified and directed.

Supply and fix for PVC connection 15 mm size with PTMT nut of length 450 mm long all as specified and directed.

Supply and fix for PVC connection 15 mm size with PTMT nut of length 600 mm long all as specified and directed.

Supply and fix in repairs, Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated / PVC or aluminium hinging device all as specified and directed.

Supply and fixing in repairs, 32 mm dia PVC (flexible) waste pipe for wash hand basin complete all as specified and directed.

Supply and fixing in repairs 40 mm dia PVC (flexible) waste pipe for Kitchen sink complete all as specified and directed.

Material and labour, in repairs, for stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15 mm dia all as specified and directed.

Material and labour in repairs for stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size fancy type and concealed type of size 15mm all as specified and directed.

Supply and fix for in repairs 15 mm bore bib taps cast copper alloy chromium plated with crutch handle or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix for in repairs 15 mm bore bib taps cast copper alloy chromium plated with crutch handle or butter fly handle screwed down for iron pipe or for brass ferrule and fixed, complete fancy type of size 15 mm fixed in repairs all as specified and directed.

Supply and fix in repair 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

Supply and fix in repairs, CP angle cock 15mm dia. fancy type cast copper alloy of Make-Jaquar Cat. No. CON-053KN or equivalent model in Parryware / Marc / Gem.

Supply and fix in repairs CP WHB mixer cast copper alloy central hole for WHB and long shank fancy type 15 mm bore complete all as directed. Make - Jaquar Cat. No. CON-167KNB or equivalent model in Parryware / Marc / Gem

Supply and fix in repairs CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as directed. (Make - Jaquar Cat. CON-281KN or equivalent model in Parryware/ Marc / Gem

Supply and fix in repairs, CP bib cock 15mm dia with crutch handle as approved fancy type long body Make - Jaquar CON-107KN or equivalent model in Parryware / Marc / Gem

Supply and fix in repairs Toilet paper holder Make :Jaquar Code ACN-1153N or equivalent model in Parryware / Marc / Gem

Supply and fix in repairs towel ring round Make Jaquar AQN -7721 or equivalent model in Parryware / Marc / Gem

Supply and fix in repairs CP Single Towel Rail 600 mm long Make : Jaquar AQN 7711 or equivalent model in Parryware / Marc / Gem

Supply and fix in repairs CP brass 15mm health faucets with 1 mtr tube and hook with metallic expandable tube 15mm complete set Make : Zim Cat No. 1624A or equivalent model in Parryware / Marc / Gem / Jaquar

Supply and fix in repairs shower rose chromium plated with or without swivel joints, 125 mm size, including fixing to steel pipe or union complete all as specified and directed.

Supply and fix in repairs, stainless steel grating cover 100mm dia fixed with white cement all as specified and directed.

Supply and fix in repairs Vitreous China urinals, flat back of size 465mm x 335mm x 265mm white with grating and union for discharge pipe complete with waste pipe of polyethylene of low or high density including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe.

Supply and fix in repairs, 20mm bore gun metal globe or gate valve with iron wheel heads screwed both ends for iron pipe all as specified and directed.

Supply and fix in repairs, 25 mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes all as specified and directed.

Supply and fix in repairs, 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (minimum weight 455 gms)all as specified and directed.

Supply and fix in repairs, 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe (minimum weight 455 gms) all as specified and directed.

Dismantling of floor hearth or wall tiling in patches not exc 3 Sqm each (not exc 0 .6 mtr wide and any length) including cement mortar bedding (but not backing) removing rubbish off the premises all as specified and directed.

Material and labour for Glazed ceramic tiles in vertical surfaces such as skirtings, wall, dados and risers to steps etc., size 350mm x 250mm x 7 mm / 450mm X 350mm X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering as backing coat in CM 1:3 all as specified and directed.

Material and labour Non - skid coloured Ceramic tiles 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Material and labour for non-skid Ceramic coloured tiles 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., and including 15 mm thick layer of screed bed in cement mortar 1:4 on floor surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for Vitrified ceramic coloured tiles (approved shade) of polish area of each tiles not exceeding 0.36 Sqm , 10 mm thick in floor, set & jointed in neat cement slurry including a layer of screed bed 15 mm thick 1:4 and pointed in coloured cement to match the shade of tiles over cement screed bed all as specified and directed.

Demolition of Cement concrete in ground floor on paving not exc 15 cm thickness (below or above ground level) all as specified and directed.

Material and labour PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base 50 mm thick all as specified and directed.

Demolition of stone slabs and tiles of any description laid bedded and pointed in mortar all as specified and directed.

Material and labour for pre-polished coloured cement concrete chequered tiles of size 300mm x 300mm x 20mm mm thick of approved design laid, jointed and pointed in coloured cement to match with the colour of tiles over and including 20 mm thick screed bed in CM 1:4 all as specified and directed.

Material and labour for 20 mm thick granite( of any type) (table rubbed and polished) in cooking platforms, steps, cills, pillars and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:4, including rounding and polishing of edges complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, for roof coverings in small patches all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, with 2 corrugations overlaps and 150 mm end lap, fixed with self tapping screws as specified.

Fixing only pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, with 2 corrugations overlaps and 150 mm end lap, fixed with self tapping screws including bonding to existing work complete as specified.

Material and labour for aluminium wind tie of any size fixed with self tapping screws of size 50/ 75 mm with integral EPDM washer in roof covering.

Dismantling structural steel work including doors, gates but excluding framed truss etc.,

Supply and fix roof trusses (framed), trussed, purlins, and fastenings and heavy brackets framing (beam, tee, angle, channel or flats section) including distance pieces, cleat etc., conforming to Fe-410 (Gde-E250) quality -A all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness all as specified and directed.

Material and labour for PCC 1:3:6, type C2 as in plinth protection finish surface even and smooth using extra cement, 75 mm thick, including forming dummy joints at 2 mtr centre to centre and filled with lean mortar 1:8 or bituminous mastic filling all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 (20 mm graded aggregate) 40 mm thick as in floor with even and smooth finishing without using extra cement complete all as specified and directed.

S& F in repairs 4 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to GI/ Aluminium framed work in ceiling all as specified and directed.

Material and labour for preparation of new steel surfaces of exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of ceiling and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., and applying one coat of white wash complete all specified and directed.

Material and labour for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc., and applying one coat of cement based paint complete all as specified and directed.

Material and labour for complete removal of old decorated surfaces of walls and cornices and applying two coats of antifungal exterior emulsion paint including one coat of primer complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc., and applying one coat of antifungal exterior emulsion paint complete all as specified and directed

Material and labour for complete removal of old decorated surfaces of walls and cornices and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of walls and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc., and applying one coat of distemper oil emulsion complete all as specified and directed.

Material and labour for preparation of old decorated surfaces of ceilings and cornices by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots etc., and applying one coat of distemper oil emulsion complete all as specified and directed.

Material and labour for preparing old surfaces of wood and wood based material exceeding 10cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old surfaces of steel surfaces exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old painted surfaces of wall/ concrete, kerb stone etc exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for cutting out existing cracks in wall form a grooves of size 75mm width and 40mm depth, cleaning the grooves thoroughly with mechanical blower and filling the groove with cement concrete of mix 1:1:2 using 12.5mm graded stone aggregate and finishing the surface even and smooth all as directed.

Material and labour for rendering 5mm thick in CM 1:3 on surface of ceiling finished even and smooth without using extra cement all as specified.

Material and labour for rendering 10mm thick in CM 1:6 on fair faces of precast concrete block masonry or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for complete removal of existing treatment on old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby / nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing with spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete.

Material and labour for rendering in two coats, 5mm thick in CM 1:4 including mixing water proofing compound over 10mm thick in CM 1:6 on concrete / brick masonry surfaces finished even and smooth without using extra cement all as specified and directed Note:- Supply only water proofing compound shall be measured and paid separately under relevant item.

Supply only liquid water proofing compound. [Make : Fosroc/ Dr Fixit / Cico]

Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer all as specified.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer all as specified.

Material and labour for preparation of new plastered surfaces of wall and applying two coat of antifungal exterior emulsion over a coat of primer all as per manufacturer's instruction and as specified complete.

S&F 8mm thick fibre cement plank ( 3.00 x .15m size) of any colour fixed in position with suitable screws/ fastners as per manufactrurers instructions on aluminium/ mild steel work in wall claddin as in repairs complete all as specified and directed.

CHANDER SEKER ENTERPRISE

Y Abulu

M/s K Moorthi

SKV Engineering

SUBASH FURNITURE SHOP

CARTWHEEL CONSTRUCTION