OUTSOURCING SERVICES AND MAINTAINENCE OF AC PLANTS AT 187 MH AND AVA AND 288 FD WKSP AND OUTSOURCING OF CERTAIN BOOSTERS UNDER GE NORTH BIKANER AT MI STN BIKANER

Amount

(Note for SI No. 1.00 to 4.00:- The rate quoted shall not be less than minimum wages as notified by Government of India/State Government/Local body whichever is higher . In case the rates quoted are less than the minimum wages as notified by the Government of India/State Government/Local body whichever is higher , his tender will be treated as NON BONAFIDE and will not be considered for acceptance. In such case, the lowest tender shall be determined by the lowest amount amongst valid / bonofied bids only). Outsourcing of AC Plant Cap 2 x 125 TR at Anant Vijay auditorium using one Refrigerator Mechanic (SEMI SKILLED) in 02 Shifts i.e. (0600 Hrs to 1400 Hrs and 1400hrs to 2200 Hrs) .Each shift of 8 hours every day including Sundays and Holidays . Quoted rates shall also include for operation of equipments of AC plant, clearing and dusting of equipments and installation( Plant room, AHU rooms, LT Panel room and area around cooling tower) and for keeping installation neat and clear all the time, oiling and greasing of all moving parts of AC plant, repairing of minor defective and carryig periodical cleaning of filters of AHU as recommended by the manufacturer in order to keep the AC plant functional and desired conditions inside auditorium complete all as specified. Notes for Sl item No.1 to 3 : (i) During Outsourcing period the tenderer is liable to maintain complete AC plant including chiller package unit, motors, connected pipe lines with valves, AHUs, VFD etc and will be responsible to ensure its proper functioning and performance. Cost of the same shall be deemed to be included the quoted rates. (ii) During the outsourcing period if the operator is found absent from duty, then not payment will be made to the contractor and aN additional recovery shall made twin the rate of worked out from quoted rates at the proportional basis of the shift. Duty rosters and attendance register as per format approved by Eng-in-charge shall be maintained by contractor and keep at installation all the time ready for checking by JE/ Eng-in-charge. (iii) Proper and efficient functioning of plant must be ensured through regular inspection by qualified techinical expert in presence of Eng-in-charge.(iv) Any damage of machinary of AC plant caused due to negligence of operator, will be repaired free of by the contractor.(v) The operator will be also operate the DG sets (if installed) which intalled under AC plant and fuel consumtion will be proper maintained in log sheets.Diesel will be issued by department under schedule 'B' (vi) Contractor will be provided the log sheet for AC plant and DG sets set seperately as per sample specified and directed by Engr-in-Charge and cost of the same shall be deemed to be included in qouted rates. (vii) The contractor will be also provide the all T&P for smooth functioning of AC plant.(viii) For routine clearing of installation and equipment contractor will not engage operator for AC plant, separte manpower will be provided by the contactor and cost of same will be included in rate quoted by the contractor. if installation for dirty and equiments are not cleaned on regular basis and noticed by Eng-in-charge in charge then a recovery of Rs 500 per day will be deducted on this account.

All per Schedule Item No.1.00 but for 4x10.2 TR Capacity AC plant installed at 288 Fd work Shop.

All per Schedule Item No.1.00 but for 2 x 26 TR Capacity AC plant installed at 21 Mahar Regt .

Outsourcing of services for pump house at certain boosters (03 Nos at different locations) under AGE E/M Bikaner with 01 FGM (Semi skilled) in each shift (each shift for 08 hours) for 02 shifts/day (1000Hrs to 1800 Hrs and 2200 Hrs to 0600 Hrs ) at each booster , a total of 06 Nos. FGM per day will be employed by the contractor all as directed by Engineer-in-Charge.:- Notes for Sl Item No.4 :- (i) Daily, weekly, mothly, quarterly, halfyearly and annual maint to be carried out and keeping records thereof. (ii) Daily log sheet/ attendance register (as aproved by Engr-in-charge ) for persons employed by the contractor to be maintained (iii) All types of T&P reuired for day to day maintenance shall be provided by the contractor.(iv) All types of transportation if reqd for handling materials/eqpts etc shall be provided by the contractor. (v) All types of fire eqpts provided in all the installations shall be maintained and operated properly. (vi) All electrial fitting and fixures installed at pump houses installation to be maintained and contractor shall be responsible for any damage.(vii) All types of water tanks shall be maintined.(viii) All installations surounding area and indise area to be kept neat and clean all the time.(ix) In case of any damage, misuse, mishandling of Govt property, contractor will be held responsible for the same.(x) Chlorination test of treated water are to be carriedout and record to be maintainted in register. Chlorine test test kit with the chemical and register shall be provide by the contractor.(xi) Medical needs to be provided by the contractor to the employees as and when required.(xii) First Aid Box with basic madicines to be kept in installation by the contractor.(xiii) Misuse of electricity and water to be penalised and effective recovery will be made by the department.(xiv) Outsourcing of services shall start immediately after acceptance of work.(xv) All garden, lawns, trees etc being planted in all the installations shall be maintained regularly and to be developed further as directed.(xvi) FGM should be ITI qualified or minimum 02 years expereince in the perticular field. Experience certificate shall be submit before commencement of work.(xvii) Fuel for running of DG Sets of all three boosters shall be supplied by the department and contractor shall responsible to collect the fuel from the department by his own arrangement and same is maintained in log sheets.(xviii) All the FGMs shall be in proper dress code and shoes as approved by the GE.(xix) If any operator will be found absent from duty at any boosters in given time then panelised a recovery @ Rs 1000/per shift .(xx) M&L for petties repairs such as replacement of glad doori / graese/oiling/cloths for cleanimng/nuts/bolts/washers rubber gaskets and T&P will deem to be included in qouted rate by the biders.(xxi) Contractor shall provide the digital attendance.

Supply and laying in replacement of Cross linked poly-ethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables ( heavy duty) with aluminium conductor, 1100 volts LT grade of cross-sectional area 95 Sqmm 3.5 core laid in trenches/through pipe in road crossings/ paths /drains /ducts /floors /along poles/walls/ceilings/ equipments etc supplied, fixed/ laid in repair including commissioning and testing complete all as specified and as directed by Engineer-in-Charge.(Note: :- (i) Necessary excavation and earth work, brick protection, sand cushioning and cover and GI pipe shall be measured and paid for separately.(ii) Road manually cutting/floor cutting/cutting holes etc in wall required for laying /fixing of cable etc shall be made good as per existing site condition. Nothing extra shall be admissible on this account and quoted rate for this item shall be deemed to include for the same) Note for Item No 5 to 21 1. LT fault / reapir and maintanace intimated to the contractor or his rep at any time day or night, through complaint slip or telephonically must be rectified by the contractor within 8 Hrs. If contractor fails to rectify the fault with in 8 Hrs a panelty of Rs 500 per day per complaint will be deducted till the fault/complaint is rectified.

Ditto All as per Srl item No 05 here in above but size of cable 25 Sqmm 4 core

Ditto All as per Srl item No 05 here in above but size of cable 35 Sqmm 3.5 core

Ditto All as per Srl item No 05 here in above but size of cable 50 Sqmm 3.5 core

Supply and fixing in replacement MCCB, 100 Amps, 4 pole, 415 Volts, rupturing capacity not less than 25 KA Ics=100%Icu, fixed Thermal Megnetic Release including extenstion link, thimbles, nuts, bolts, washers etc. making including incoming and outgoing connection complete all as specified. Make: ABB/Scheinder/Siemens/Legrand

Ditto All as per Srl item No 9 here in above but 160 Amps

Ditto All as per Srl item No 9 here in above but 36 KA 200 Amps

Ditto All as per Srl item No 9 here in above but 36 KA 400 Amps

M&L Cable indoor / outdoor end terminals jointing kit for LV/LT 1100 V cable heat shrinkable type joint kit complete with jointing material and accessories, sleeves not less then 30 cm, thimbles etc suitable for 25 Sqmm to 50 Sqmm 3.5 core XLPE armoured aluminium conductor cable including testing after jointing, fixing in replacement complete all as specified as directed by Engineer-in-Charge.

Ditto All as per Srl item No 13 here in above but 70 Sqmm to 150 sqmm 3.5 Core

Ditto All as per Srl item No 13 here in above but 185 Sqmm to 300 sqmm 3.5 Core

M&L Waterproof USB temperature & humidity data logger for monitoring and recording temperature in cold chain management. Date logger with multifunction LED display, large memory capacity, 2 year battery life, LED and ability to auto generate date reports, replaceable battery, unique MKT algorithm, IP67 high protection grade and one button operation. Generate PDF report automatically with operating any software display type: multifunction LCD, status indicator high protection grade: IP67, wide range of applications high accuracy sensor with long-term stability property USB port, plug and play easily. Large capacity: 32,000 points, support data cycle and cover MAC/WIN supported free software with adjustable log interval 10s-24h high/low temperature and humidity alarm setting/multiple alarm setting.

M&L Sling psychrometer hygrometer humidity mercury and tempreture meter pinless analog moisture measuerer made out of wood body

M&L Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate at a depth not less than 1.5 m below ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides, connected to galvanized earth wire 4 mm dia with and including nuts, bolts, check nuts & washers of galvanized iron or steel and riveted to earth plate at one end and connecting to main switch board or metallic bodies of HT/LT equipments etc at the other end, GI wire encased in and including 20 mm bore GI light grade pipe with all fittings, from top of electrode to body of equipment fixed with and including 25 x 6mm flat iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe light grade and including funnel, wire mesh, copper lugs etc from bottom of earth pit to top of electrode complete with earth pit in PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate and CI cover complete all specified and shown in electrical plate No 05 of SSR Pt-I connecting earth electrode to test point with and including earthing lead including necessary excavation and earthwork in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance n.exc 50m, material and labour complete all as specified and as directed by Engineer-in-Charge. (Notes 1. The rate quoted shall be deemed to include for all the above provisions. 2. PCC chamber shall be constructed at least 1.5 m away from the earth electrode and pipe for watering shall be provided in slanting manner).

Ditto all as per Seiral item No 18 here in before but using galvanised iron strip 32 x 6 mm as earthing lead complete all as specified and as diredted by Engineer-In-Charge.

M&L Danger notice plate of size 20cm x 15 cm x 1.60 mm thick of mild steel sheet, vitreous, enameled white, with letters, figures and conventional skull & bones in signal red colour and fixed with MS clamps made out of 25 mm x 3mm MS flat iron including bolts and nuts of approved size for LT 1100 volts, complete all as specified and as directed by Engineer-in-Charge.

Supplied and fixed in replacement of GI strip of size 32mm x 6.0 mm complete all as specified and as directed by the Engineer-in-Charge.

M/s Rohit Construction Co.

M/S SHREE SHYAM TRADERS

M/s Chopra Associates

J.D INFRA ENGINEERING

RUHI ASSOCIATES