Construction of a road connecting the underpass near the police outpost situated close to Moradabad Kashipur State Highway 737 to the vicinity of the Dhela River bridge, passing along the northern side of Jalalpur and Tugadia villages (Block Dilari).

Earth work in cutting or in embankment in ordinary soil, excavation to be in the regular pits not exceeding 0.5m in depth and earth work in embankment to be in 20cm layers, including ramming and dessing the surface to requied levels & slopes& also inclulding 1.5 lift & 30m lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m. Distance as directed by the engineer encharge. as per S.I. No.-253(b) with mechanically compacted 95% proctor's density

Granular sub-base/base/surface course by providing well graded material , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with smooth wheeld roller to achieve the desired density, complete as per Technical Specification clause 401.

Providing, laying, spreading and compacting stone aggregates of specific sizes 45mm to 63mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.

Providing, laying, spreading and compacting stone aggregates of specific sizes 53 mm to 22.4 mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Providing and applying primer coat with bitumen emulsion (SS -1)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg per sqm using mechanical means AS PER Technical Specification Clause 502 but excluding GST.

Providing and applying Tack coat with bitumen VG-10 using bitumen pressure distributor @ 0.275 kg. per Sqm. On the prepaired dry and hungry bituminous surface cleaned with Hydaulic broom as per Technical Specification Clause 503 but excluding GST.

Providing,laying and rolling of open graded P.C. of 20mm thickness composed of 13.2mm to 5.6mm aggregates eigher using penetration grade bitumen or emulsion to required line grade and level to serve as wearing course on a previouslyprepared base i/c mixing in a suitable plant, laying and rolling with a three wheeld 80-100 kN static roller capacity, finished to required level and gredes to be followed by seal coat as per Technical Specification Clause 508 but excluding GST.

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B as per Technical Specification Clause 510 but excluding GST.

Brick on edge lining on both side of road with M-150 bricks laid with mud mortar including cost of all material labour and T&P etc required for proper completion of the work (S.I. No. 765).

Providing and laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawing and Technical Specification Clause 1504.