Annual Rate Contract for Supply of HT/LT Tape, Sleeves, Putty

Polyester film coated Insulation Tape Roll ,0.025mm Transparent Polyester film coated on one side with yellow rubber based adhesive , Tensile Strength (Kg/2.54cm)-8 Minimum, Elongation (%)-60 Minimum, Electric Strength(Kv)-4.5 Average, Adhesion to steel(gm/2.54cm)-500Minimum, Adhesive Strength(g/25mm)-1000Minimum,Class of Insulation-130 deg C, Total Thickness(mm)-0.055+/-0.006,Size 25mm (W) x0 .06mm (T) x 65 Mtr. (L),For end holding applications, As final layer of insulation on coil, All test are carried out as per Test Method: IS 7809 PART II.

Highly conformable OZONE and water resistant Self Amalgamating black rubber Tape for usage in High Voltage Conditions and Water proof application, Total Thickness (mm)0.75,Tensile strength (KG/2.54cm)-4.5Minimum,Elngation(%)-720 ,Di-Electric Breakdown(kV/mm)-25 ,Continuous Operating Temperature-90 deg C, Insulation Class for short term-130 deg C, Size 2.5cm (W) x0 .75mm (T) x 9.1 Mtr. (L),For Splicing and repair of power cables upto 69KV,Prevention of moisture ingress in VSAT dishes/Transmission equipments, Corrosion protection -especially at weld joints. Test Method: 1IS 7809 PART II.

Water proof, Puncture Resistant, Good Mechanical strength, Non Corrosive Electrical grade Adhesive, Fire Retardant, Thickness-0.3mm+/-10%,Adhesion to steel(gm/2.54cm)-700,Tesile Strength(kg/2.54cm)-23.5,BDV-2KV with 50% Overlap : Size 1.9 cm (W) x 0.3 mm (T) x 20 Mtr.(L).

Water proof, Puncture Resistant, Good Mechanical strength, Non Corrosive Electrical grade Adhesive, Fire Retardant, Thickness-0.3mm+/-10%,Adhesion to steel(gm/2.54cm)-700,Tesile Strength(kg/2.54cm)-23.5,BDV-5KV with 50% Overlap : Size 1.9 cm (W) x 0.3 mm (T) x 20 Mtr.(L).

Very high adhesive tape with special Waterproof coating on one side and adhesive coating on other side , Total Thickness(mm)0.3,Tensile strength(kg/2.54cm)-20 Minimum, Elongation(%)-5Minimum, Adhesion to Steel(gm/2.54cm)-3050Minimum, Weathering resistance-to pass 200 hrs as per SAE J 1960 IN standard XENON ARC based weather meter-Passes, Water permeability - Passes, Oil resistance-Passes, alkali resistance-Passes ,Test Method: 1 IS 7809 PART II for sealing against water ingress on all equipment.

Size: 50mm (W) x 20 Mtr. (L).

Size: 100mm (W) x 20 Mtr. (L).

Size: 75mm (W) x 20 Mtr. (L).

Self Fusing silicone rubber tape for HT applications, Class -180 deg C,Thickness-0.480mm,Di-Electric Breakdown(kV)-12.6, Elongation (%)-550,Tensile Strength (kg/2.54cm)-7.7, Good anti Tracking property and confirm inability, Flame retardant, Class-H, For Lap joint insulation, crimped joint insulation, Terminal end insulation and for high temperature /BDV, Size : 25mm (W) x 0.5mm (T) x 15 Mtr. (L), Flam retardancy as per UL510 , Passes Flammability test as per FAR25.853 .

Electrical insulation Glass cloth tape Fiberglass cloth coated on one side with pre-cured acrylic adhesive and having inter-liner, Class-155,Di-Electric Breakdown(kV)-3.0, Total Thickness (mm)-0.160,Adhesion to Steel (gm/2.54cm)-700,Tensile Strength (kg/2.54cm)-60,Elongation (%)-15, for holding & reinforcement of primary insulation for oil filled transformers, protection & insulation of small transformer coils, providing insulating layer on transformer cores, protection in heat tracers. Size 25mm (W) x 0.16mm (T) x 20 Mtr. (L).

Gray colored asbestos free /easy to remove /multipurpose sealing and caulking material used for sealing crevices from dust , moisture and air , Non Hardening Putty , Single component , Plasticity (mm) : 2 , Insulation class : 90 degC , for Sealing of glands, plugging of holes on Electrical panels/motors , 5 Kgs. Pack.

Polyimide Film Tape,0.05mm thick Kapton (DuPont) film coated uniformly on one side with silicon adhesive, Total thickness(mm) 0.08mm Minimum, Adhesion to steel 180 degree (gm./2.54cm)-800,Tensile Strength(kg/2.54cm)-30.0Minimum,Elogation (%)-70.0 , Electrical Strength (KV)-11, Flammability-Self Extinguishing, : Size 2.5cm (W) x .08mm (T) x 25 Mtr. (L), Tolerance-Length(Meters)+0.5/-0.0,width(mm)+/-0.5.

Sleeving made of a special silicone rubber coated fiberglass braid Expandable, Moisture resistant, Halogen free, Fire retardant Insulation Sleeve,' Permagrip, Expansion Ratio-1:2,Dielectric Strength(KV/mm)-9 Minimum, Colour-Black, Insulation Class-200,Operating Temperature-Can withstand continuous operating temperature of -70 deg C to 200 deg C in following sizes Tolerances +/-0.5 mtrs, For cable splicing, Insulation of lead wire of Motors, Transformers, Bus bar Connections, Lugs, Wire Harnessing.

Size 25mm (dia)X10 Mtrs.(L).

Size 16mm (dia)X10 Mtrs.(L).

Size 8mm (dia)X15 Mtrs.(L).

Size 4mm (dia)X25 Mtrs.(L).

Size 6mm (dia)X25 Mtrs.(L).

Size 12mm (dia)X10 Mtrs.(L).

Size 14mm (dia)X10 Mtrs.(L).

Protective high temperature insulating enamel that dries very quickly, Synthite Red insulator (Class H),Forming a tough and flexible film with excellent heat and chemical resistance having following characteristic -Very fast air drying, Excellent chemical resistance, Oil and moisture resistant, Hard, smooth abrasion resistant film, Excellent adhesion, Thermal Class180 deg C, Color-Red, Specific gravity at 25 deg C-1100+/-50gr/lt, Viscosity in Ford Cup n. 4 at 25 deg C-110-150",Build up D.F.T.(ASTM D-115-55)-mm.0,075/0,100,Anti-drying time ( on a copper plate) set to touch-60',Diectric Strength(dry)-2000 Volts/mm.0,025,Diectric Strength (after 24h.dipping into water-1200 Volts/mm.0,025,CTI according to IEC 60112-600M, Pkg. Size 400 ML (Aerosol)

Flame retardant single component coating designed for electrical insulation in wide range of electrical equipment and applications. It is designed specifically to work at high operating temperatures and in demanding service requirements like in presence of oil, grease, dust etc. It is highly resistant to moisture, oxidation, UV radiations and external weather ability. It also exhibits extremely good bonding, surface hardness and surface finish on the substrate post application and curing. The coating is available in various colours like Red, Yellow, Blue, Black, Electrical breakdown strength: 11kV with two coats / Tracking index: Greater than 400 /Flame retardancy: Passes UL94 V0 /Temperature stability: Capable of withstanding 180 ºC continuously. Rated for Class H. Extremely tough and scratch resistant./ Anti-static in nature. /Curing cycle: a. Touch dry: 30 minutes b. Full dry in air: 72 hours Size - 5 ltr bucket.

11 KV BDV In Red Colour

11KV BDV In Yellow Colour

11KV BDV In Blue Colour