SPECIAL REPAIR OF COMMUNITY HALL ALONGWITH BOUNDARY WALL AT LEKHANAGAR UNDER AGE B/R-I OF GE (EAST) JABALPUR

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

Removing debris to a distance to a distance exc 500m but n.exc 1.0Km and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10sqm in plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and directed.

Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.

M&L for cement concrete M-25 design mix in foundation including rafts, footings, foundations, beams, plinth beams, bases of columns etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for cement concrete M-25 design mix in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and as directed.

M&L for cement concrete M-25 design mix in columns, posts, piers and struts etc etc complete all as specified and as directed.

M&L for brick work with sub class B old size bricks straight or curved on plan exc 6m mean radius built in in cement mortar 1:6 complete all as specified and directed.

M&L for rough finished, flat formwork to sides of concrete foundation, footings bases of columns and raft beams, sides and soffits (if any) of foundation and plinth beams and similar works vertical or batter complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beam, beam haunchings, girders, lintels, cantilevers, shelves incl supports overhangs etc also splays between floors and beams etc rough finished, flat surfaces complete all as specified and directed.

M&L for formwork for sides of pillars, posts, struts, piers, columns or stanchions rough finished, flat complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub floor finished even and fair complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) any thickness including cover fillets complete all as specified and directed.

S&F 6mm thick non asbastos fibre cement building boards fixed or laid/inserted to and including GI/Aluminum framework fixed in ceiling flat or sloping over and including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleaves and screws at 450mm centre to centre intermediate channel 0.9mm thick having two equal flanges of 15mm each and wed of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and incl ceiling section not less than 1.2m length of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel at 457mm centre to centre including hangers of 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab or purlins by means of cleats made out of GI flats 40 x 3mm size 60mm long and expansiion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.

M&L Virified Ceramic tiles (light shade) 10 mm thick (square/rectangular) polished, area of each tiles exc 0.42sqm but n.exc 1.00sqm, in floors etc laid over & including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item above but in skirting over and including 10mm thick plaster in cement mortar 1:3 complete all as specified and directed.

M&L non skid ceramic coloured & designer tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors/skirting laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed.

M&L glazed ceramic coloured & digital tiles 350 x 250 x 7/450 x 350/7 mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specifed and directed.

Taking down cement plaster or cement lime plaster from brick walls including racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on concrete surfaces as in ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L preparing surface of newly plastered surfaces of walls and applying two coats of oil bound distemper over alkali resistant priming preparatory to distempering complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment from walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M&L for complete removal of existing treatment from old decorated surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of steel and iron articles of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint ordinery tint over one coat of red oxide complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping and the like including weathering, slightly rounded or chamfered angles and throating as directed complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection surface finished fair and even complete all as specified and directed.

Demolition of brick or stone masonry built in cement mortar or cement lime motar complete all as specified and directed.

M&L for brick work in half brick thick wall with old size bricks straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregrate laid over roof slab for filling undulations finished fair and even complete all as specified and directed.

M&L screed bed or bedding layer 15 mm thick in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with water proofing liquid @ 150 ml per bag of cement complete all as specified and directed by Engineer-in-Charge. Note : Water proofing liquid shall be measured and paid separately.

Supply Integral water proofing Liquid of Dr fixit/sika/Fosroc

S&F APP polymeric water proofing membrane, minimum 3mm thick and weighing not less than 3.0 Kg/Sqm of make super thermolay manufactured by STP Ltd or ‘Hyper Plas’ (Polyster) manufactured by M/s IWL Ltd or ‘Shaliplas’ (polyester) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or ‘EMW FLATE’ of M/S Texas India Ltd} at the rate of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions and the provisions given in the Notes below complete all as specified and as directed. Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/ other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 30/40 confirming to IS-73, applied @1.20 Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.40 Kg/Sqm (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/mumty Chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with one coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.

Taking down chowkats or frames n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

S&F factory made soild PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet reinforced with mild steel square tube and edges will be painted to match with single side prelam sheet as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.

M&L for factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet fortop rail, lock rail and bottom rail on either side and as gap inserted for top rail and bottom rail: pannellingf of plain colour PVC sheet to befitted in the MS rame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drgs.

S&F 3 Track powder coated aluminium window with std aluminium section of thisckness 2 mm with 2 Nos glazed shutter and 1 No Wire mesh shutter complete including 5mm thick glass pane, 0.36mm dia stainless steel wire mesh average width of aperature 1.4 mm including rubber gasket, glazing clips, aluminium cleats, locking arrangement complete all specified and directed.

M&L Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, hand rails, cupboards frame and similar work con- forming to Fe.290 Gde-E-165 with and including necessary cutting and welding complete all as specified and directed.

Mild steel TMT bars 10mm dia and overcut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Mild steel TMT bars 5mm dia and over and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F Anodised aluminium Powder coated frame for windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodized aluminum powder coated door shutters. Aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc complete all as specified and as directed.

Supply and fixing Anodised Aluminium grills of deco grill No DG-916 pattern thickness of grill 7.5 mm complete all as specified and directed.

Supply and fixing 5.5 mm Sheet glass, ordinary quality and glazing exc 0.5 Sqm in each pane complete all as specified and directed.

S&F for aluminum anodized, barrel tower bolt 200mm long of extruded section complete all as spectified and directed.

S&F butt hinges, medium weight 100mm long cold rolled mild steel and fixed complete all as specified and directed.

S&F 125mm long extruded aluminum alloy handles, fabricated type, anodized complete all as specified and directed.

S&F mortice lock brass, 4 levers, vertical type, size 75 mm fixed to aluminum doors complete all as specified and directed.

S&F in repairs 20 mm dia fancy CP curtain rod with bracket and screw with neccessary all fittings complete all as specified and directed.

Taking down 25 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

M&L for 25 mm dia steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down 20 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

M&L for 20 mm dia steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking down 15 mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cill, sunshades, shelves, lintal etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth in brick wall/stone masonry wall etc complete.

M&L for 15 mm dia tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fixing in repair gun-metal, globe or gate valves 20mm bore dia, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Ditto all as per item above but 25mm bore complete all as specified and directed.

Dismantling exc 500 and n.exc 1000 ltr capacity water tanks and removing to store complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, including 25 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. Note : PVC tank shall be ISI marked and having two layers.

S&F in repairs water closet vitreous China (squatting pan) complete including provision of lime concrete bedding vitreous china squatting pan orrisa pattern of size 580 x 440 mm, white, with CI 100mm bore P or S trap front or back inlet and foot rest any pattern excluding flushing cistern complete all as specified and directed.

S&F in repair viteous china wash down water closet pan (pedestal pattern), white including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device incl fixing in repair trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F in repair health faucet brass chromium plated including connection to stop cock complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level ,white, with inlet, ball valve,float and handle including brackets complete all as specified and directed.

S&F in repairs vitreous China Wash Hand Basin, white, flat back size 550×400 mm including cutting for and pinning in ends of brackets including brackets but exclusive taps,waste, chain and leg porcelain stop pan complete all as specified and directed.

S&F in repair vitreous china bowl urinal flat back,size of 430 x 370 x 340 mm white (minimum) with grating and union for discharge pipe(excluding flushing cistern, flush pipe and waiste pipe) complete all as specified and directed.

S&F in repairs chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed.

S&F in repairs 15mm bore, pillar taps, fany type chromium plated, cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long screwed shanks and flynuts, screwed for iron pipe complete all specified.

S&F in repairs 15mm bore Bib tap cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed complete all specified.

S&F in repairs 15mm bore, angle/stop cock, fancy type, chromium plated,cast copper alloy screwed down high pressure, with crutch or butterfly handle, screwed down,screwed for iron pipe or for brass ferrule complete all specified.

S&F in repairs 15mm size PVC connection with PTMT nuts of length 600 mm complete all as specified and directed.

Supply and fixing in repair waste fittings 32mm bore, brass chromium plated for glazed ware sinks, basins, urinals etc with long screw shank and fly nuts, flange end bedded in red lead cement and other fixed complete all as specified and directed.

Supply and fixing in repair 32mm bore low density poly ethylene pipes (LDPE), 1.0 mtr long of pressure rating 6Kgf/Sqcm fixed to wash hand basin complete all as specified and directed.

M&L 75 mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement complete all as specified and directed.

Dismantling post struts RCC embedded in concrete any section incl taking out embedded portion and making good disturbed ground complete all as specified and directed.

Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) srt in cement mortar complete all as specified and directed.

Material and labour for150mm bore reinforced concrete pipes class NP-2, laid and jointed complete with collars complete all as specified and directed.

M&L for concrete bed with cement concrete 1:4:8 type D-2 (40mm graded stone aggregate) to drain pipes of 150mm bore includiing packinhg under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Cutting into existing manholes for connecting new drains, 150 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L for 150mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base for flooring and paving complete all as specified and directed.

M&L for sand filling under floor 50mm thick for laying paver block complete all as specified and directed.

M&L for 80mm thick precast coloured interlocking paving blocks M-40 Grade factory casted using grey cement with pigment, machine pressed confirming to IS-15658-2006 and of shape haxagon/ triangular/ zigzag/ I-shaped etc complete all as specified and directed.

M&L for kerb stone of PCC 1:2:4 type B-1 using 20mm graded stone aggregate of size 450 x 300 x 80mm and setin CM 1:6 complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, power point or bell point etc) complete including fixture and fitting such as switches, ceiling rose holders & regulators light fittings etc. Removing materials to store for keeping in safe custody or for taking credit and making good distrubed surfaces of walls, floors etc complete all as specified and directed.

Taking down old/unservicable distribution boards by disconnection of electric connection carefully SPN DBs/TPN DBs/main switch including old unserviceable MCCBs/MCBs, Isolators, etc and making good to disturbed surface etc complete all as specified and directed.

Taking down carefully copper/aluminium Sub Main wiring/service connection of any size from surface/connected/existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

M&L for concealed point wiring complete with 1.5 Sqmm FRLS PVC insulated and unsheathed two single core multistranded copper conductor cable for working voltage 1100 volts, grade drawn into and including 20 mm dia PVC conduit of medium grade for one light point controlled by one switch including 1.5 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor and connecting to earth dolly & to be terminated in & inclusive of MS sunken box 1.2mm thick (flush metal box) for mounting of fittings like switch, complete with 3mm thick laminated sheet cover complete all as specified and directed.

All as per item ser No 98 above but for One ceiling fan point controlled by one switch complete all as specified and directed.

All as per item ser No 98 above but for One exhust fan point controlled by one switch complete all as specified and directed.

All as per item ser No 98 above but for One 3 Pin, 5/6 amps socket outlet point ,on the same board with 1.5 Sqmm cable size etc complete all as specified and directed.

All as per item ser No 98 above but for One 3 Pin, 5/6 amps socket outlet point , independent board with 1.5 Sqmm cable size etc complete all as specified and directed. .

All as per item ser No 98 above but 2.5 Sqmm copper conductor for 5 Pin 15 Amp switch socket combintion on independent board and 2.5 Sqmm stranded copper conductor as an earth continuous wire complete all as specified and directed.

All as per item ser No 98 above but using 4 Sqmm single core copper conductor cable of multistranded FRLS, PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including necessary running of 2.5 Sqmm copper conductor FRLS, PVC witre as earth continuity conductor alongwith wiring an connecting to the common earth dully, complete all as specified and directed.

S&F switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified and directed.

S&F 5 pin socket outlet, 5/6 Amps / 3 pin 5/6 Amps, flush type, ISI marked, complete all as specified and directed

S&F switch socket combination 2 in 1, 5 Amps flush type, complete all as specified and directed.

S&F switch socket combination 5 in 1, 5/16Amps flush type complete all as specified and directed.

S&F ceiling rose surface type PVC/Polycarbonate isolated body, 65 x 20mm, 3 terminals, complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

S&F Lamp holder, including 10 Watt LED bulb, PVC/polycarbonate type with back plate suitable for battan fittings, complete all as specified and directed.

S&F 1x10 Watt, 2 feet, LED light fittings wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electric driver including 1x10W LED Tube light etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed.

S&F 1x20 Watt, 4 feet, LED light fittings wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation and integrated electric driver including 1x20 Watt LED Tube light etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size compete all as specified and directed.

S&F LED luminaire 600 mm x 600 mm square LED panel 35/36 Watts, 220 Volt recessed type with high efficieny PMMA diffuser soft glare free light complete with drovers, holders, LED lamp suitable for roof ceilling, including connecting up with driver three core flexible copperr conductor cases of suitable size complete all as specefied and directed.

S&F Energy saving new generation environmental friendly long life versatile pressure source and electronic driver of IP-65, LED security light of capacity 35 watts with pre-wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multistranded from ceiling rose to light fittig including necessary dia GI pipe medium grade bracket 1.5 m long bend to required shape with clamps, nuts, bolts etc complete all as specified and directed.

S&F for Post Top lantren LED fitting Alumininum sheet spun canopy, Thick Imported Acrylic sheet molded body finished with polyurethane paint (With prior Treatments) suitable for 5 to 15 Watt LED bulb B 22 ABS Holder Cast aluminum Spigot pole entry : 78 mm complete with IP 65/66 protection and pre-wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multistranded from ceiling rose to light fittingcomplete all as specified and directed by Engr-in-Charge. Make : Mepro electricals cat part No PTL - 55 or equeivalent to Havells/Bajaj/Philips

Taking down the ceiling fan/exhaust fan etc complete all as specified and directed.

Fixing or hanging only the ceiling fan with replacement of unserviceable 3 core PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc complete all as specified and directed.

S&F for energy efficient exhaust fan of 300 mm sweep made of metal body ventil Air -DS type complete with louver with bolts nuts and washers size lt 15 cm 12 mm dia embedded in the wall including provision of PVC flexible coppler cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connecttion and making suitable size of hole to existing brick wall for fan base complete all as specified and directed.

M&L sub main wiring (concealed type) in & including PVC Rigid Conduit of 25 mm dia with two single core FRLS PVC insulated unsheathed cable, 1100 Volts, grade having stranded copper conductor of 6 sqmm nominal cross sectional area each drawn into and all accessories including one single core 6 sqmm copper conductor for earth continuity conductor connected to earth dolly complete all as specified and directed. Note : Two run single core cable(1 x 6 Sqmm single core cable of Red/Yellow/Blue colour for Phase + 1 x 6 Sqmm single core cable Black colour for Nutral), 1 x 6 Sqmm single core cable Green colour for earth conductor and one run of PVC conduit shall be measured as a unit length.

S&F for sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc concealed and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F for sheet metal enclosure MCB DB SPN 8 way vertical type with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F sheet metal clad box suitable for 230 Volt 50 Hz AC supply three pin with MCB SP 20/32 Amps complete all as specified and as directed.

S&F MCB triple Pole and neutral rated capacity 63 Amps, 415 Volts, breaking capcity 16 KA "C" curve complete all as specified and directed.

S&F MCB single Pole and neutral rated capacity 32 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

S&F MCB single Pole rated capacity 5 to 32 Amps, 240 Volts, breaking capcity 10 KA "C" curve complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earh pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron, all as shown in electrical plate No 3 of SSR Part-I), connected to earthing test point including excavation/earth work in any type of soil, PCC 1:3:6 type C-2 in pit and CI pit pit cover including funnel covered with wire mess and handle duly reinforced with 6 mm round bars both ways @ 125 mm c/c, GI protection pipe 15mm bore light grade and watering pipe 20mm bore medium grade complete all as specified and directed.

Schedule of credit amount of Rs. 50,382.00 to be deducted during AOC.

JITENDER SINGH

KRD ASSOCIATE

M/s Ram Associates

a k builders

C L BHATIA

Goodluck Enterprises

M/S Modern builders

Tiki Water proofing Co

LAL SINGH & SONS