PERIODICAL SERVICES TO MD AND OTM ACCN TO VARIOUS BUILDING AND CERTAIN REPAIR WORKS TO ROOF, FLOORING, PLINTH PROTECTION, PLASTERING, CHAJJAS, PLUMBING WORKS, JOINERY ETC IN CERTAIN BUILDINGS AT VELLACHI UNDER AGE(I) NAVY CHENNAI

Amount

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 Sqm each with shutter (without taking off shutter from the frame) and Complete all as specified.

Taking down chowkat or frame with shutters (without taking off shutters from the frames) not exc 1.5 sqm each.

Taking down shutters of any description not exc 1 Sqm each.

Taking down shutters of any description exc 1 Sqm & n.exc.2 Sqm each.

Resecuring or easing and adjusting without taking down shutters of any description not exceeding 1 sqm each

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm but n exc 2 sqm each

S&F second class hard wood plain , solid , straight , chowkats and frames wrought , framed rebated on the soilid rounded or chamfered put together with glue pinned at joints.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick teak wood lipping all as specified.

S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered perticle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated.

S&F 30 mm thick second class hard wood , glazed and skelton shutters open rebated and prepared to receive glass, guaze etc (without sash bar) fitted with cut and mitred breads for securing glass etc stiles and rails, size at members of shutters as specified in SSR Pt-I sec 8, clause 8.20 (b).

S&F PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with MS squre tube complete all specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded prelam PVC sheet (both side ) 'C' channel having a PVC sheet strip in 20 mm width strck inside with solvent cement for stiles and rails ( feather edges ) pre Lam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointing together with solvent cement suppling and fixing in the frame at site as pre-specification and drawing.

M & L Cup boards stuttters made with 19 mm thick prelaminated particle board with decorative lamination on one side and other side balancing white lamination medium density, interior grade, including 6 mm teak wood lipping all as directed.

S & F powder coated aluminium frame for doors , windows etc with one or more rebates including necessary joining cleats (minimum thickness of powder coating 50 micron) complete all as specified and directed

S & F Anodised Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified (minimum thickness of powder coating 50 micron)

S&F Anodised powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges,suitable handle (1 No.) complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-O 0r Fe 310-O

M&L Providing PCC Type B1 1:2:4 (20mm graded aggregate) in as in hold fast fixing

S & F in repairs 125mm long medium weight cold rolled mild steel butt hinges

S & F in repairs 100mm long medium weight cold rolled mild steel butt hinges

S & F in repairs 75mm long medium weight cold rolled mild steel butt hinges

S&F 125 mm butt hinges, medium weight, cold rolled mild steel and fixed

S&F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed

S&F 75 mm butt hinges, medium weight, cold rolled mild steel and fixed

S & F in repairs Aluminium anodised barrel tower bolt all as above but 150mm long

S & F in repairs Aluminium anodised barrel tower bolt all as above but 125mm long

S & F in repairs Aluminium anodised barrel tower bolt all as above but 75mm long

S & F Aluminium anodised barrel tower bolt all as above but 150mm long

S & F Aluminium anodised barrel tower bolt all as above but 125mm long

S & F Aluminium anodised barrel tower bolt all as above but 75mm long

S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 150mm long

S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 125mm long

S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 100mm long

S&F extruded aluminium alloy handles fabricated types, anodised, each 150mm long

S&F extruded aluminium alloy handles fabricated types, anodised, each 125mm long

S&F extruded aluminium alloy handles fabricated types, anodised, each 100mm long

S&F in repairs aluminium alloy anodized sliding door bolt 300mm long with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section all as specified.

S&F 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section all as specified.

S&F 200mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section all as specified.

S&F in repairs aluminium anodized hooks and eye 150mm long.

S&F aluminium anodized hooks and eye 150mm long.

S & F repairs Floor door stopper 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.

S & F of Floor door stopper 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.

S&F in repair aluminium anodised tubular curtain rail 20mm dia

S&F aluminium anodised, brackets for curtain rods in repairs

S & F in repairs Door closer hydraulically regulated of Extruded Aluminium Section, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S & F in repairs300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete

S&F in repair aluminium hat pegs solid body 125mm to 175mm long.

S&F in repair aluminium wardrobe hooks (single) solid body 50mm to 60mm long.

S&F in repairs brass 4- levers Mortice lock, vertical type, size 100 mm

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S & F 4mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each pane.

S & F 5.5mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each pane.

S & F 5.5mm thick sheet glass, ordinary quality, in squares exc 0.5 sq.m each pane.

S & F 5.5mm thick frosted sheet glass, ordinary quality, in squares exc 0.5 sq.m each pane.

S & F 4mm thick sheet glass, pinheaded type ordinary quality, in squares n.exc 0.5 sq.m each pane.

S & F Aluminium alloy wire cloth, 0.45 mm dia of wire and average width of aperture 1.40 mm and fixed with beading to wooden frames complete all as specified and directed.

S & F in repairs Aluminium alloy wire cloth, 0.45 mm dia of wire and average width of aperture 1.40 mm and fixed with beading to wooden frames complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided.

M & L framed worked such as grills, grating, etc with ends of bars shoulders and/or rivited or forged into spikes, framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work confirming to Fe 290 Gde E-165.

M&L preparation of new steel surfaces of any descriptions and applying two coats of synthetic enamel paints over a coat of red oxide primer.

M & L Preparation of old painted Steel surfaces of any description, exceeding 10 cm width or girth, not otherwise described and applying One coats of Synthetic Enamel paint.

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M & L for taking down aluminium door shutter exc 1.5 Sqm but not exc 4 Sqm and refixing in the same opening after repairs/refiiting the door shutter included all screws and cleats including fixing of 8mm long bolt at the top and bottom complete all as specified and as directed (Note : 8mm long bolt will be measured and paid seperately

Supply of MS long bolt 8mm dia for aluminium doors complete all as specified and as directed by Engineer In Charge

M & L for taking down aluminium window openable shutter not exc 1.5 Sqm and refixing in the same opening after repairs/refiiting the window shutter included all screws and cleats complete all as specified and as directed complete all as specified and as directed. (Note : Hinges, Glass, Wiremess will be measured and paid seperately)

Attending minor complaints of joinery such as wooden/steel/aluminium of any description including door springs, rolling shutters etc requiring carpentry work like adjusting easing,wrought, cutting, pinning,wedging and finally making good etc and functioning to seating over with each other with tightening of screws/nails , door, springs etc, including petty repairs material like screws/mails, plug, grease etc to make it functional as in day to day maintainence work

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided including padding concrete on roof all as specified and directed.

M&L for cement concrete 25 mm thick type B-1, 1:2:4 using 20 mm graded stone aggregate as in sub base for flooring complete all as specified and as directed

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises including removing of all the debris to a distance n exc 2 km out side the base at the disposal of the contractor.

M & L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 15mm of thick CM 1:4 for laying floor finishes

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15mm thick screed bed with CM 1:4 complete all as specified

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 18 sqm but not exceeding 0.38 sqm, in Skirtings etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over rendering10mm thick plaster on fair faces of brick work/concrete in CM 1:3 complete all as specified

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed with CM 1:4 complete all as specified

M & L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Skiting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering10mm thick plaster on fair faces of brick work/concrete in CM 1:3 complete all as specified

M&L for glazed ceramic coloured tiles 350 x 250mm x7mm/450 X 350 X 7mm thick as in dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering10mm thick plaster on fair faces of brick work/concrete in CM 1:3 to receive tiles as in dado.

Demolition of stone slabs and tiles of any description or any thickness in floors, skirtings, risers etc laid ,bedded and pointed in any mortar.

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry in floors and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid & enosing jointed over and including 20mm cement screed in CM 1:6 all as specified.

S&F in repairs Galvanised steel water tubing 15 mm dia Medium grade and connections, including all fittings and fixed complete to walls and ceilings or laid in floor.

S&F in repairs Galvanised steel water tubing 20 mm dia Medium grade and connections, including all fittings and fixed complete to walls and ceilings or laid in floor.

S&F in repairs Galvanised steel water tubing 25 mm dia Medium grade and connections, including all fittings and fixed complete to walls and ceilings or laid in floor.

S&F in repairs Galvanised steel water tubing 40 mm dia Medium grade and connections, including all fittings and fixed complete to walls and ceilings or laid in floor.

Cutting chases, pinning in , for concealed water tubing on brick or stone walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and directed.

S & F in repairs Gun metal 40 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed.

S & F in repairs Gun metal 25 mm dia of pipe globe or gate valve with Iron wheel head, screwed both end for Iron pipe one fixed.

Supply and fix in repairs kitchen plate rack stainless steel, of size 790 mm x 910 mm x 255 mm not less than 8.00 Kg including all fixing arrangements on to wall complete all as specified and as directed. Make : Diamond/Nirali/Neelkanth as approved by AGE (I)

S & F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding , low level flushing cistern and Flush pipe of 32mm dia but including seat cover)

S&F in repair vitreous china squating pan "Orissa" patern size 580 x 440mm white with 'P' or 'S' trap front or back inlet with integral foot rest (excluding flushing cistern and flush pipe), squating pan including connection to trap and flushing pipe, anit syphonic pipe etc complete incl making good to floor.

S&F in repairs PVC valve less flushing cistern low level 10 litres capacity with syphonic action type with inlet ball valves, float and handle and connections to pipes and fixing of chain and pull (or) lever including brackets and 32mm dia PVC flush pipe of 60cm long complete all as specified.

S & F in repairsVitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe)

S&F in repair vitreous china, wash hand basin white flat back size 550 x 400 mm white complete waste, chain and pug and precelain stopper including bracket.

S&F in repairs plastic water closet seat cover white/closed pattern with flat bottom and cover and MS CP or aluminum hinges device all as specified and directed by Engineer-in-Charge,

S&F in repair bib taps concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipes of 15mm bore.

S & F Brass 2 in 1 CP mixer for mixing hot & cold water screwed down for iron pipe and fixed

S & F in repairs two way bib cock, CP, Fancy type - 15mm dia,

S & F in repairs Health Faucet for 15mm dia with 1.5m long easy flex tube in Chrome finish and wall look

S&F in repair Angle valves fancy type,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore.

S&F in repairs stop cock concealed type with long shank and cup of fancy type,chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore.

S&F in repair Brass chromium plated shower rose 125mm size, including shower arm with or without swivel joints,complete all as specified and directed.

Supply & fixing fancy type pillar tap 15mm dia, cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut screwed for iron pipe & fixed in repairs.

S & F in repairs 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing union and cap.

Supply & fixing only 32mm waste fittings brass of chromium plated for wash basin etc, with long screwed shanks and fly nut, flange end bedded in red lead cement and others and fixed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm

M&L for PVC waste pipe with 32 mm dia as waste pipe to WHB/urinal/sink as in repairs complete

S & F in repair of PVC (SWR) multiple Floor trap of 75 mm outlet plain with grating including jointing with solvent cement.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repairs soap dish, vitreous China white, approximate size 160x 160x90mm

S & F in repairs Stainless Steel Tubular towel rail , 20mm dia, 60cm long between flanges

S & F in repairs grating doom 125 mm dia with waste hole of PTMT (Min weight 40 gms)

S&F in repairs PVC internal fittings (kit) complete for flushing cistern , all as specified and directed by Engineer-in-Charge.

S&F in repairs flush handle for low level flushing cistern all as specified and directed

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe for 20 mm bore dia & fixed.(Minimum weight 210gms)

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe for 25 mm bore dia & fixed.(Minimum weight 455 gms)

S&F PVC water tank 500 lit capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling the same complete all as specified and as directed

S&F in repairs PVC water tank seat cover with fittings suitable upto 1000 litres capacity complete all as specified and directed

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 250 litres and not exceeding 500 litres

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc of tank capacity exceeding 500 litres and not exceeding 1000 litres

Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of tank capacity exceeding 1000 Ltrs and not exceeding 2000 Ltrs

Checking and attending to water leakage from taps WCs, flushing cistern, urinals, wash basins bottle traps etc and any obstruction to water supply requiring plumber work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etc including cost of petty materials like washers of all size, safeda, thread (soot), M-seal, screws, nails to make it functional and leak proof all as specified and directed by Engineer-in-Charge (Note : If spindle is to be replaced the same will be measured and paid at supply only rates)

Supply only spindles of brass of any size required for bib taps, pillar cocks, stop cocks, angle valves, concealed valves complete all as directed by Engineer-in-Charge, Make : ISI marked.

Removing plants/herbs grown on walls/junctions with roots using herbicide chemicals and of existing brick and concrete in high raised building at any storeyed and making good the disturbed surfaces as per existing complete all as specified and directed.

M & L for Clearing the blockage in the water closets of any type completly preferably by manually means to enable the flush water to flow freely to the manholes,all as specified and directed by Engineer-in-Charge

M&L for clearing the blockage of WHB, bottle trap, urinal, sink etc by manually/mechanically and removing blockage from entire system and making it fully functiona all as specified and directed by Engineer-in-Charge.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius,built in CM 1:6 .

M&L for Brick work with flyash bricks , straight or curved on plan to any radius in half brick built in cement mortar 1:6

Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc.

M & L Rendering 5mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement.

M & L Rendering for 10mm thick in cement mortar (1:6) on other than fair faces of internal bricks or concrete surfaces finished even and smooth with using extra cement all as specified and s directed..

M & L Rendering for 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and fair Complete all as specified and s directed..

M & L Preparing newly plastered surfaces of ceilings and applying three coats of white wash.

M&L for preparing newly plastered surfaces and applying two coats of distemper oil emulsion over coat of primer on surfaces of walls Complete all as specified.

M &L applying two coat of Cement base paint over a coat of primer alkali resistance on newly plastered or unplastered wall surface including preparation of surface, complete all as specified.

Preparation of old decorated/ plastered or unplastered ceiling surfaces and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall surfaces any applying one coat of cement base paint complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall surfaces by complete removal of existing treatment and applying two coats of distemper oil emulsion over coat of primer complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall surfaces by complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Preparation of old treated wood and wood based surfaces of any description over 10cm in width or girth and applying finishing coat with synthetic varnishing complete all as specified and directed.

S VENKATESAN

S Dilli