8848/2021-22/E8

Amount

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick above or below ground level (unreinforced).

All as per item No 1 above but reinforced cement concrete

Demolition of stone, brick masonry built in cement mortar incl quoins, arches, etc but exceeding ashlar facing dressed stone Work etc.

Dismantling CGI or PGI sheet of any gauge and thickness or any pattern roof covering.

Dismantling wall and ceiling boards any thickness including cover fillets.

Dismantling framed timber scantling 40 Sq cm and over in section in any position

M&L PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection 75 mm thick incl finished even & smooth without using extra cement complete all as specified.

Taking down cement plaster/wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed

Cement concrete 1:2:4 type B1 ( using 20 mm crushed stone agg.) as in floor 40 mm thick as levelling course rough finish to receive top finishes all as specified to recd top finishing complete all as specified.

M&L screed bed 15 mm thick in cm 1:6 for bedding layer to floor tiles

M&L for coloured Matt finish Non skid ceramic tile (Joint free) area of each tile exe 0.18sqm but n exe 0.38 sqm x 7 to 8mm thick , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for coloured Virified ceramic tile (Joint free) area of each tile n exe 0.36 sqm x 10mm thick , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Cutting , rounding of edges and mirror polishing, of granite /marble/kota stone complete all as specified and directed by Engineer in charge.

M&L for 10 mm thick screed bed or bedding layer of mortar in CM 1:3 as on vertical surfaces for laying wall finishes.

M&L for coloured Glazed ceramic Premium quality(joint free) tiles 450x300x7mm thick on vertical surface such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

S& F in repair Stalness steel drapery curtain rod including fixing brackets, With Finelss etc completed all as sfd.

M&L Reinforce cement concrete(Nominal Mix) 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in slabs supported on walls.;etc. all asspecified

Form work to soffits of suspended slabs n exc 200mm thick (Horizontal or sloping) rough finished surfaces of concrete

Formwork to edges of concrete floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n exc 10cm wide rough finished surfaces of concrete

Mild steel TMT bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L PCC 1:3:6 type C-2 (40mm graded aggregate) Cement concrete in foundations, filling and mass-concrete

M & L for PCC 1:2:4 type B1 (Using 20 mm graded aggregate) as in coping and similar works incl necessary from work all as specified.

RR masonry with best quality locally available stone uncoursed, well bonded, bedded, solidly hearted and built in CM 1:4 complete all as specified.

All as per item No 24 above but except stones

Taking down cement plaster from stone/brick walls, racking out joints hacking for key, scrubbing down with water etc

20mm thick cement plaster on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathingk in CM 1:4 surface finished even and smooth without using extra cement

Supply only integral water proofing compound.

20 mm thick stone masonry surfaces or surface other than fair face of brick-work or on one side of lathingk CM (1:6) surface finished even and smooth w/o using extra cement.

M&L for applying two coats of oil bound distemper on wall on new plasted surfaces including preparation over a coat of Chalk whiting, on plastered surfaces, prepara-tory to distempering ® all as specified {(Make : Goodlass Nerolac (Super Acrylic), Asian Paints(Tractor Acrylic Distemper), Berger Paints (Bison Super)}

M&L for two coats of OBD over complete removal of existing treatment and wall putty base on old plaster surface including preparation over a coat of 3mm wall putty and a coat of JK Primer all as specified {(Make : Goodlass Nerolac (Super Acrylic), Asian Paints(Tractor Acrylic Distemper), Berger Paints (Bison Super)}

M&L for applying two coats of cement base paint over priming plastered surfaces with JK primer priming coat complete all as specified.(Make : Snocem, Asian, Berger)

M&L for Two coat of cement base paint on old plastered surface of wall after the necessary preparation. (Make : Snocem, Asian, Berger)

Providing and fixing tiled false ceiling of of size 595x595 mm in truehorizontal level suspended on inter locking Gyproc metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms /sqm, both side inclusive) consisting of 3600mm long main "T" runner size 24x38mm and0.30mm thick, 1200mm long cross "T" of size 24x25mm and 0.30mm thick,600mm secondary cross T of size 24x25mm and 0.30mm thick and PP GI wall angle of size 24x24mm and 0.4mm thick. Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI .Wall angle is fixed along the perimeters of the ceiling to Walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers. Main T runners are then suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 8 mm dia and 45mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at max 1200mm center to center along main T, and not more than 150mm from Spliced Joints.The last hanger at the end of each main runner should not be greater than 600mm from the adjacent equal to wall. Then 1200mm long cross T is interlocked between the main T at 600mm center to center to form a grid of 1200x600 mm and then secondary cross “T" of length 600mm is then interlocked at middle of the 1200x600mmgrid to form grids of 600x600mm. Cross Tees at the ends having length more than 600mm are to be supported independently. Finally White colored Gyproc 12.5mm thick Plain Poly shield tiles of size 595x595 having foil on back side & PVC paper on front side wrapped around edges to be placed in grid .

S&F rolled sections Framed brackets of angles or tees with web and flanges incl flat iron as Hangers, adjusting level fixed to roof slabs cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc..Conforming to Fe.290.Gde-E-165 as ceiling complete all as specified and directed

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (Make : Nirali, Blue Star, Kobra)

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, Set cover etc including making good to floor where required all as specified.(Make : Parryware, Hindustan Sanitary Ware, Cera)

S&F in repair PVC valveless syphonic action type low level flushing cistern 10ltr capacity white with all internal fittings and CP handles knob/push including brackets PVC connection 45cm long including nut and PVC washer at both ends with brass chromium plated coupling 32mm bore including 32mm bore PVC long bend flush pipe 90cm long all as directed by Engineer in charge.{(Make : Slimline(Parryware), Commander(Water bird), Hindustan Sanitaryware}

S & F in repair Vitreous China wash hand basin, white, flat back, size 550x400mm excluding taps, waste coupling, chain and plug and porcelain stopper but including brackets complete all as specified.(Make : Parryware, Hindustan Sanitary Ware, Cera)

S&F in repair CP Pillar taps,15mm dia fancy type cast copper alloy,with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot or "cold: with long screwed shanks and fly nuts, screwed for iron pipe and fixed (Make : Jaquar, GEM Marc)

S&F in repair CP Stop valve/Angle valve 15mm bore cast copper alloy with crutch and butter fly handle screwed down high pressure,screwed both ends for pipe or for unions all as specified.(Make : Jaquar, GEM Marc)

S&F in repair CP Bib tap, 15mm dia, cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or brass ferrule and fixed in repair all as specifiedscrewed for iron pipe or brass ferrule. All as specified .(Make : Jaquar, GEM Marc)

S&F in repair CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges

S&F in repair 15 mm bore PVC connection with PTMT of length 450 mm

S&F in repair 15 mm bore brass CP shower rose 125 mm size and all as spd

Taking up or down steel tubing of 15mm bore and connections including cleaning for re-fixing

Taking up or down steel tubing of 20mm bore and connections including cleaning for re-fixing

GI tubes medium grade 15mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors all as specified.(Make : Jindal, TATA)

All as per srl item No 48 above but fixing only 15mm dia old pipe (Note: Serviceable pipe retrieved under srl item 39 here in before shall be reused

GI tubes medium grade 20mm dia, with all fittings and fixed complete to walls and ceiling or laid in floors all as specified.(Make : Jindal, TATA)

All as per srl item No 50 above but fixing only 20mm dia old pipe (Note: Serviceable pipe retrieved under srl item 40 here in before shall be reused

M&L for cutting chases, pinning in making good to facing where required and pointed in CM 1:3 to ends or edge of landing, steps cills, sunshade, shelves etc and cutting chases for concealed water tubing in stone concrete block or slab walls etc and making good cutting n exc 10 cm girth all as specired

Dismantling of water tanks capacity exc 500 ltrs but n.exc 1000 ltrs and removing from the site or to store all as specified.

S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position all as specified capacity of water tank 1000 ltrs including inlet and outlet connection complete.(Make : Sintex, Diplast, Rotex, Polycon, Star)

S&F in repair Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pepe or brass ferrule for bore of pipe 20mm, complete all as specified

S&F in repair CP Stop valve 20mm bore cast copper alloy with crutch and butter fly handle screwed down high pressure,screwed both ends for pipe or for unions fixed all as specified.(Make : Jaquar, GEM Marc)

Rolled sections as in Main and cross beams hip and jack rafters , Purlins where connected to commen rafters and guide for siding d, etc conforming to Fe-410 W (Gde-E-250) quality B all as directed

Preparation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide all as specified

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Make:-JSW STEEL/TATA SHAKT I/ Everest

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not other wise provided.

Taking down chowkats or frames incl shutters (without taking off shutters from frame) n exc 1.5 Sqm

All as per item No 62 above but exc 1.5 sqm but n exc 4 sqm each

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

100mm size butt hinges medium weight colled rolled mild steel (ISI Marked)

S & F composite window with double shutter for glazed and gauzed side in one pressed steel frame including stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and 5mm thick glass with complete all as specified Note:- Measurments shall be taken and paid compositey for frame, glaze and gauged .Grill shall be measured & paid separately.

S & F composite Ventillator with top hung shutter for glazed and gauzed side in one pressed steel frame including stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and 5mm thick figured glass with complete all as specified Note:- Measurments shell be taken and paid compositey for frame,glaze and gauged .Grill shall be measured & paid separately.

M&L for framed work such as grills, gratings etc with end of bars shouldered or riveted or forged into spikes, framed guard bars confirming to Fe-290, Gde-E-165.

2nd class soft wood ( kail ) as in plain fillets, square rectangular or triangular in section fixed with screws exceeding 6 and nexc 13 sqcm wrought all as specified.

I st class Soft wood (Sal, Hollock) plain solid, straight, Chowkat and frames, wrought, framed, rebated on the solid , rounded or chamfered, put together with glue, pinned at joints all as specified

Flush shutters, 30 mm thickness solid core construction, with block board core and ply wood face panels, commercial type on both sides (Make : Swastik Ply Wood, Century Plywood)

IInd class hard wood glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass or gauze etc (divided into squares) and fitted to chowkats, edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing glass as specified in SSR Part-I section 8.24 (a) supplied and fitted to chowkhats{(Make : M/s Everest Trading Corpn, Damtal (H.P.), M/s Sarab Enterprises, Damtal (H.P.)}

S&F Solid single PVC door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing {(Make : Rajshri, Sintex, Plastiwood Ltd)}

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, Including Iron Mongery supplying & fixing in frame at site as per specification & drawing {(Make : Rajshri, Sintex, Plastiwood Ltd)}

S/F 200 mm long aluminium anodised barrel tower bolt of extruded section and fixed

M&L150 mm size Aluminium handle, cast type, anodised and fixed.

S/F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp and stape ( bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt and sliding bolt of extruded section or cast aluminium alloy and fixed.

S & F 300mm, Mild steel ordinary rat rail rod pattern springs including roller and roller plate complete supply & fixed

Two coat of synthetic enamel paint over a coat of pink primer on new wood or wooden surfaces of any description over 10cm in width or girth not otherwise described including preparation(Make : Goodlass Nerolac Paints, Berger Paint, Asian Paints)

Block boards, grade 2 quality 18/19mm thickness inerior grade, commercial type, fixed with screws to timber frame work

S&F Hasp & staple, aluminium anodised, including bolt to hinge plate and fixed ith screws 100 mm size

S&F in repair 110 mm bore PVC (SWR), waste and vent pipe in any length with or without ears, Single socketed in any length with rubber ring joints , laid in trenches or in floors and fixed to walls etc complete all as specired

All as per ser item No 84 above but 75 mm bore complete all as specified.

S&F in repair 100 mm bore PVC (SWR) bends any radius, disminishing pieces or tapers complete all as specired

S&F in repair 75 mm bore PVC (SWR) bends any radius, disminishing pieces or tapers complete all as specired

M&L for preparation of old painted surfaces of steel or iron of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint.

M & L Toilet papar holder Toilet paper holder Coloured, vitreous China, box type complete all as specified.

S & F in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms).

S&F in repairs, self cleaning water jet, chromium plated, Fancey Type high qualitey (HEALTHFUSET)15 mm bore ABC Body mild steel CP with 1.25 mtr ong flexible tube and ABS wall hook including making connections and fixied complete

M & L and Repair for Soap dish, vitreous China white, approximate size 160x 160x90mmS ,any type fixed to plugs with chromuum plated

M & for Glass Shelf assembly consiting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railling 60CM long

M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded agg) as in Sub-base to floor finishes.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25 mm thick , set, jointed and pointed in neat cement slurry as in floor/path etc with grey cement and pigments.

Taking down carefully copper/aluminium point wiring (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc.

M & L for point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size(two run with colour code RYB) for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm (as continous earth wire Green)multistrand PVC concealed conduit of approved size and quality ISI marked,including all other required accessories as specified in preamable 1(a) to (q) of section 19 of SSR Part-II under heading 'point wiring' fixedon wall/ceiling including sunk cast iron terminal boxes grouting/flushing on wall for mounting fittings like switch,sockets etc covered with 3.00 mm thick plastic laminated sheet top cover of brick masonary/Stone masonary wall complete including cutting,chasing,pinning and making good the disturbed surface by using cement mortar 1:3 complete all as specified and directed by Engr-in-charge.Make of wire/cable-Havells/Anchor/Finolex,(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).

All as per Srl item No 96 here in before but for one 5 amps socket out let on same board.

All as per Srl item No 96 here in before but for one 5 amps socket out let on independent board.

All as per item No 2 above but for power point 3 pin switch socket 16 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm(two run with colour code RYB) on independent board including one run of 2.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in cocealed PVC conduit of appropriate size and best quality ISI marked, including all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

Supply & Fixing Switch piano, flush button, single pole one way 6 Amps

Supply & Fixing Socket outlet 3 pin, 6 amps flush type.

Supply & Fixing Switch piano, flush button, single pole one way 16 amps

Supply & Fixing Socket outlet 2 in 1,3 pin 5 and 16 amps flush type.

Supply &Fixing Bell switch 5 Amps single pole one ways

Supply &Fixing electrical Bell ding dong type 230 volts Ac 50 HZ complete

Supply and fix ceiling rose 65X50 mm two to three terminals complete all as specified.

Supply and fix lamp holder for batten/angle fitting.complete all as specified and as directed

S & F Wall mounted LED integrateg batten fitting T5, 20 W LED, 4 feet, PVC extruded. Havells cat part no. LHEXBLP7PN1W020 ,C&S Cat part No LTTB4F20WLEDP/W or LL20-221-XXX-65NE3 of wipro or equivalent in CG/Phillips including all accessories complete all as specified.

S & F Wall mounted LED integrateg batten fitting T5, 9/10 W LED, 2 feet, PVC extruded.Havells cat part no. LHEXBLP7IN1W009 C&S Cat part No LTTB4F10WLEDP/W or LL20-111-XXX-65NE3 of wipro or equivalent in CG/Phillips including all accessories complete all as specified.

S & F LED lamp 10 watts CP NO:- LHLDEUHEMK8P010 of Havells or equivalent in Philips/Bajaj/Crompton/Wipro all as specified and as directed.

S & F bulk head light fitting with LED lamp 1X 9/10 Watt , complete all as specified and directed.

Supply & Fixing Sheet metal enclosure for DB,s, double door (when MCB,s to be used) single pole & neutral 12 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's any type including taking down of kitkat fuse/MCB SPN/SP as directed by Engineer-in-charge. Cat Part No CSDBSPNSD08 of C&S, or equivalent in Havells/Legrand

Supply & Fixing Sheet metal enclosure for DB,s, double door (when MCB,s to be used) Triple pole & neutral 4 way with 200 amps rated bus bar 415 volts with fixing arrangements including taking down ICDP/DB's any type including taking down of kitkat fuse/MCB SPN/SP as directed by Engineer-in-charge. Cat Part No CSDBSPNSD08 of C&S, or equivalent in Havells/Legrand

Supply and fixing MCB single pole and nuetral 6 to 63 Amps, 240 volts complete all as spd and directed. Make C&S, Havells, Legrand, L&T

Supply and fixing MCB single pole 6 to 32Amps, 240 volts all as spd and directed. Make C&S, Havells, Legrand, L&T

M&L GI pipe light grade 40 mm dia for cable protection laid in trench , under road /nalah or under floor wall etc complete all as directed by Engr-in charge.

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRPVC sheathed two run (as phase and neutral) and run 6.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one pvc concealed wiring complete all as specified and directed by Engr-in-charge.(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

S&F in repair MCB TPN with capacity 63 Amp;s ,415 Volts 50 HZ including making necessary connection , taking down old unserviceable MCB/ main switch of any capacity and make from position complete all as specified and as directed Make: HAVELLS/ STANDARD/LEGRAND/ABB

Supply & laying XLPE insulated armoured heavy duty electric cable with aluminuin conductor, 1100 V grade, cross sectional area 16 sqmm 4 core.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as directed.

M&L for sand cushioning for cable protection 8 cm below the cable and 15 cm above the cable complete all as specified and directed.

M&L for bricks common burnt old size sub class `B' bricks laid dry for cable protection flat width wise complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5mtr above the starting point.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in each layers.

M&L for cutting/ grooving on plinth/wall/verandah in any condition for laying of cable through pipe and making good the disturbed surface by using cement concrete 1:2:4 type C-2 using 12.50mm graded stone aggregate as required complete all as specified and directed by Engr-in-charge.

Supply and fixing Thimble copper crimping type suitable for MCB TPN for 16 sqmm size cable all as specified and directed.

Disconnecting and taking down of Geysers (water heater) of capacity 25/50 Ltrs horizontal/vertical of any make/model from existing position and dismentling of parts i.e.bottom plate, Top cover, water assembly thermostate, heating elements, inner tank ,glass wool,Pressure release valve, inlet and outlet valves etc.complete and reassembling and refixing in same position after descaling desludging and cleaning with suitable chemicals and materials and washing with fresh water and repair and replacment of defective/unserviceable components and refixing to the existing position by means of anchor bolt,PVC connection, replacement of plug Top, connection lead wire,indicator, thermostat,heating element, inner tank, outer cover(whatever is required at site) complete all as spaciifed and directed.

Material and labour factory made sheet metal enclosure dust and vermin proof made out of 2.00mm thick Ms sheet of size 60x50x20 cm depth with double door hinged shutter and locking arrangement for fixing DBs, KWH meter etc flushed/semi flushed /grouting on wall as per site requirement including DIN rail channel mount MCB,s SP/SPN/Electric meter , powder coated paint after prepration of surfaces with suitable glass vision panel complete all as directed (Note: Unit rate shall be inclusive of making good the area not exceeding 0.6 sqm and not exceeding 0.125m depth for filling the hollow existing surface with half bricks in CM (1:4) all as specified and directed by Engr-in-charge.

M&L for servicing of exhaust fans AC single phase 230/ 240 V of size 200/300/450mm(as existing) sweep with louver by taking out from wall frame, rewinding with appropriate guage of copper wire, replacement of condenser of 3.5mfd with alongwith minor nut,bolts,lead wire, broken blade/MS frame and refixing to wall by anchor bolts and testing on completionall as specified and directed.

Excavation in trenches for laying/ dismantling of pipeline not.exc. 1.5 mtr in width and not exc 1.5 mtr in depth and getting out in any type of soil.

Returning, filling in including spreading levelling, watering, and well ramming in layers not exc. 25 cms

Removing excavated materials to a distance not exc 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point.

Supply & fixing tubing medium grade galvanised iron laid in trenches/wall/floor complete with all fittings like socket, bends, union,elbow,reducer,tee of 20mm bore, ISI marked complete all as specified and directed by Engineer-in-Charge.

Cutting, screwing existing tubing upto 50 mm dia for alterations/repair the existing connections in running condition and inserting tee of 20 mm size while laying new GI steel tubing all as specified and directed by Engr-in-charge.

Supply & fixing stop cock/gate valve cast copper alloy 20mm bore screwed down, high pressure with clutch of duty free handle, screwed both ends for iron pipe complete .

Demoliton and breking up 150mm dia drain pipes (salt glazed were, AC or Reinforced concrete ) set in Cement Moarter

M & L for RCC NP3 150 mm diameter Pipes laid on 150 mm thick PCC 1:4:8 bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional and depth of line 0.70mtr to 1.65 Mtr.

Demolition of Concrete of any description and in any position for drain.

M&L Cement concrete 1:2:4 type B-2, using 40 mm graded crushed stone aggregates as in surface channel and drains, complete all as spd.

M&L Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as speciied and directed.

m/S Varun Gupta

kaushal builders

M/s Aman Enterprises

Pathania Builders

M/S Ajay Kumar Mahajan

M/s Joginder Paul Bhatia

malghotra construction co

M/s Shakti Electric Works

HEERA CONSTRUCTION CO.

KEWAL SONS