Construction of Balance work of District Court Complex Doda by way of construction of Malkhana Watchman room, balance work of Lawyers chamber, Main gate with Security post, internal Roads with Parking, R/Walls and Boundary wall.

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in:All kinds of soil

Extra for every additional lead of 25mtr beyond 1 mtr upto 250 mtrs. and deposit to a level of 1.5mtr. (50 mtrs Lead)

Extra for every additional lift of 1.5 mtr.or part thereof in:All kinds of soil (1.50-30mts)

Extra for every additional lift of 1.5 mtr. or part thereof in: All kinds of soil (3.0-4.50mts)

Filling of available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:5:10 (1 cement: 5 coarse sand :10 graded stone aggregate 40mm nominalsize) (A) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) (A) Crushed

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) (A) Crushed

Providin and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting~ propping etc and removal of form work for.- Foundations footings. bases of columns ( Labour rate )

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers •. abutments, pillars, posts, struts, butteresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks, plain window sills,sunken floors fillets etc. upto floor five level,excluding the cost of centring, shuttering and finishing:1 3 6 (1 cement 3 coarse sand 6 gradead stone aggregate 20mm nommal SIZe! with 20% Boulders

(A) Crushed

(B) Supply and Handling of Stone

Centering and shuttering including strutting~ propping etcand removal of form work for.-Retatning walls. return walls. walls (any thickness) including attached pilasters. buttresses. plinth and strmg courses fillets etc ( Labour rate )

Providing and placing : PVC pipe 80 mm weep holes in R/walls

(a) Bricks work with common burnt clay F.P.S (non-modualar) bricks of class designation 75 in foundation in plinth in cement mortar 1:6 ( 1 cement : 6 coarse sand).

(b) Extra for brick work in superstructure above plinth level upto floor V level. (By manual means

(a) Half brick masnory with bricks of class designation 75 in superstructure in cement mortar 1:4 (1 cement : 4 coarse sand)

(b) Extra for brick work in superstructure above plinth level upto floor V level.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centering, shuttering, finishing and reinforcement. (a) 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded crushed stone aggregate 20mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form for:Lintels, beams, plinth beams, griders, bressumers and cantilevers. ( Labour rate )

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. (a) Thermo mechanically treated bars.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel of 1.25mm/1.60mm thickness including hinges jamb, lock, jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm/ 1.60mm pressed mild steel welded or rigidly fixed together by mechanical means, including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-chc-rge: Fixing with adjustable lugs with split end tail to each jamb

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 coarse sand)

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mmthick with 20mm nominal size stone aggregate. (a) Crushed.

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. (a) Crushed

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 12. 5mm nominal size) (A) Crushed

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt·hinges bright finished of required size with necessary First class kail wood

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : First class kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type Il lS: 12823 marked

Providing and fixing aluminum tower bolts ISI marked (anodised anodic coated not less than grade AC 10 as per IS: 1868) transparent or dyed to required color or shade with necessary screws etc. complete.

Providing and fixing aluminium hadles ISI marked anodised ( anodic coated not less than grade AC 10 as per IS: 1868) transparent or dyed to required color and shade with necessary screws etc. complete.(a) 100mm

Providing and fixing bright finished brass handles with screws etc. complete : 125 mm

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).

Providmg and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer,(having superior brand) embossed on the body, door weight upto 36-80 l<g and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc.complete :

Providing and fixing in position collapsible steel shutters with vertical channels 20x1 Ox2mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T -iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer,

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished seamless type tubes

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Labour charges for fabricating eracting welded builtup sections in beams/rafters /purlins/stair cases/trusses/gratings including cost of welding Electrodes & Electicity Charges. (Material Available at Site)

Strctural steel work in single section fixed without connecting plate including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required. 0.63mm thick with zinc coating not less than 27 5gm/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2

Providing and fixing Ist quality ceremic glazed tiles for ramps conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all color, shade except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortor 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ceremic glazed floor tiles 300x300 mm (thickness to be specified by the manufactures)of Ist quality conforming to IS: 13755 of NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in color such as white, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of cement mortor 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.

Providing and fixing 8 mm thick 1800x1200 mm calcium silicate Board false ceiling at all height including providing and fixing of frame work made of special section, power pressed from M.S. sheets and galvanized with zinc coated of 120 gms/sqm (both side exclusive) as per IS: 277 and consisting of angle cleat of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm C/C, the flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangess of 25 x 10 x 0.50 mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45 x 15 x 0.90 mm running at the spacing of 1200 mm C/C, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm C/C, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clip made out of 2.64mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.50 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partitions with the help of Raw plugs at 450 mm centre with 25 mm long dry wall screws @ 230 mm interval, including fixing of calcium silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x 25 mm at 230 mm C/C, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering upto 150 mm on both sides of joints and two coats of primer suitable for boards, all as per manufactures specification and also including the cost of making opening for light fittings, grills, diffusers cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specifications and direction of the Engineer incharge but excluding the cost of painting work.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1 Osqm

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with acrylic smooth exterior paint of required shade on New work (two or more coats applied @ 1.67 litre/1 Osqm over and including base Coat of water proofing cement paint applied @ 2.20kg/1 Osqm)

Finishing walls with Acrylic smooth exterior paint of required shade:Old work (one or more coats applied@ 0.90 litres/10sqm).

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface Water thinable Cement primer

Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. (external work) 20 mm dia. nominal bore

Providing and fixing soil, waste and vent pipes : PVC pipe 110 mm

Providing and fixing soil, waste and vent pipes : PVC pipe 80 mm

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: PVC D/bend 110 mm

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: PVC D/bend 80 mm

Providing and fixing plain bend of required degree: PVC D/bend 110 mm

Providing and fixing plain bend of required degree: PVC D/bend 80 mm

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. PVC juction 110 mm

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. PVC juction 80 mm

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china W.C. pan of size 580 mm.

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete: litre (full flush) capacity-white.

Providing and fixing kitchen sink with C. I. brackets, C.F'. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. 61 Ox460mm bowl depth 200mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete 40 mm dia

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing ball valve (brass) of approved quality complete 15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality complete 20 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and gyser points _of approved make conforming to IS : 8931 a) 15 mm nominal bore

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia.

Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25mm waste hole

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 1 02mm, heigth of 75mm with concealed

Providing and fixing PTMT swiveling shower 15mm nominal bore, weighing not less than 40gms.

Constructing brick masonry' road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:5 (1cement : 5fine Sand ) including 500x450 precast R.C.C.precast grating with frame complete as per standard design. With FPS Bricks.

Providing and fixing white vitreous china pedestal type ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipaldesign complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Jet spray for europian type water closet

Providing c;1nd fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: (A)White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm

Providing /applying Construction / expension joint with hypalon tape / combiflex system of 200x1mm high performance joint sealing system with adhesive / epoxy as per manufacturer standard procedure. The cost should be inclusive of materials, labour,tools required at site.

Providing and fixing of 2mm thick x 200mm wide aluminium strip to cover the expension joint in the building. The Cost should be inclusive of cutting of aluminium strips as per site conditions including bending, drilling of holes in strips as well as walls / columns with one side hole of oval shape to accomodate movement of expension joint and fixing with screws / anchors. The cost is inclusive of all scafolding as required at site

Flooring area to be provided with polysulphide treatment and making joint with angle iron frame 50mmx50mmx6mm having gap of 40mm. The frame to be fixed with floor by rebaning system and the weldup.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement@ 0.488 kg/sqm mixed with water proofing cement -,. compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth shouldnot be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry ofcement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. Thiswill be allowed to air cure for 4hours followed by water curing for 48 hours.The entire treatment will be taken upto 30cm on parapetwall and tucked into groove in parapet all around. (d)fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surfacewill be measured.

Preparation of subgrade by excavating earth to an average of 22.5 em depth, dressing to camber and consolidation with road roller including making good the undulation etc. and disposal of surplus earth upto 50 metres.

Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including making good the undulations etc. with earth or quarry spoils etc. and rerolling the subgrade

Supplying and stacking of graded stone aggregate at site of size range (excluding carriages) 63 mm to 45 mm (a) Nallah.

Supplying and stacking of graded stone aggregate at site of size range (excluding carriages) 53 mm to 22.4 mm (a) Nallah

Supplying and stacking of stone screenings/ chippings at site. excluding carriage 13.2 mm nominal size

Supplying and stacking of stone screenings/ chippings at site. excluding carriage 11.2 mm nominal size

Supplying and stacking of stone Dust

Laying water bound macadam with specified stone aggregate stone screening and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete (Payment for stone aggregate, screenings, kankar, moorum and red bajri etc. to be made separately) : Base course with 63 mm to 45 mm size including stone screenings 13.2 mm size.

Laying water bound macadam with specified stone aggregate stone screening and binding material including screening, sorting, spreading to template and consolidation with power road roller of 8 to 10 tonne capacity etc. complete (Payment for stone aggregate, screenings, kankar, moorum and red bajri etc. to be made separately) : Base course with 53 mm to 22.4 mm size including stone screenings 11.2 mm size.

Providing and laying of 20mm premix carpet surfacing with 1.8 cum and 0.9 cum of stone chiping of 13.2 mm size and 11.2 mm size respectively per 100 sqm and 52/56 kg of hot bitumen per cum of stone chipping of 13.2 mm @11.2 mm size respectively including a tack coat with hot straight run bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler including consolidating with road roller of 6-9 tones capacity , including , providing / laying of seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 mm micron sieve ) clearing and prepareing the existing road surface as per specification on WBM @ 0.75 Kg / sqm .

Disposal of Excavated Earth Avg. 3.0 km By mechanical Transport

GLOBAL CONSTRUCTIONS

Shabir Ahmed