SPL REPAIR TO ROOF OF BLDG NO T-10, T-18, T-16, T-49, T-28, T-41, T-37, T-34, T-21, T-23, T-54, T-55 OF SATA BTY AND REPLACEMENT OF ASBESTOS ROOF SHEET WITH GALVALUME ROOF SHEET IN BLDG NO P-69, P-50 OF MED REGT AT ITARANA CANTT ALWAR

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15cm thick (below or above ground level) complete all as specified and directed

Dismantling Asbestos Cement Corrugated or Semicorrugated in Roof covering including redge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

Taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed by Engr-in-Charge.

M & L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified & as directed.

M&L Rendring 10mm thick in CM 1:6 on brick work or concrete surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement all as specified.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete wall surfaces fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound ( water proof compound paid seperatly) all as specified.

M&L water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surface of wall & applying two coats of cement base paint over a coat of primer chalk whiting, complete as specified and directed.

M&L for preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint. complete all as specified and as directed by Engr- in - Charge.

M&L for complete removal of existing treatment by mechanical scrapper, brooming down washing, rubbing down and stoping of distempered and painted old decorated surface of walls, Plastered or unplastered including cornices, plasters etc and applying two coats of cement base paint (of approved shade/tint) as per manufacturers instruction complete all as specified and as directed by Engr- in - Charge.

M&L for preparing newly plastered surfaces and applying two coats of Oil bound distemper on walls including 2mm average thickness wallcare putty complete all as specified and directed by Engineer-in-Charge.

M & L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and as directed by Engr- in - Charge.

Demolition Mud in roofs, any thicknes, including plastering , existing tretement and cleaning (whether full thickness removed or only or part there of) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed by Engr-in-Charge.

M&L screed bed laid in 15mm thick CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified& directed by Engr-in-Charge.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m including cleaning surfaces over bituminious primer complete all as specified& directed by Engr-in-Charge.

M&L APP based plymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven reinforcement/mat (center core) with thermal insulation laid by toarch application method with overlaps 100mm on length side and 100mm on the width side as per manufacture,s instructions with fabric (wt not less than 150 gms/sqm) on primed surface including two coat of refelective silver aluminium paint over APP membrane complete all as specified.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tesile strength of 550 Mpa as in roof covering to wall, fixed with self tapping screws as specified

M & L rolled sections as in main and cross beam, hip and jack rafters purlins where connected rafters and running rails and guides for sliding doors: fixed with angle cleats other connecting plates

M & L for plate (plain or chequred channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachement.

S&F for steel work in tubular section for purlin/rafters etc including special shaped washer etc. complete using induction butt welded tubes conforming to I.S. 1161-1998 grade St- 240.

S&F for preparation of new steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat over red oxide primer complete all as specified and directed.

M & L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr- in - Charge.

M&L For False Ceiling Complete With Armgyp-FB ceiling Tiles of Size 595x595,9mm thick (as approved by GE) fixed with and including galvanised iron Powder coated inverted 'Tee" or "L" section (Concealed GI frame Work) Suspended From Ceiling with provision of Galvanised wire 4mm dia and wall tapping screws including butterfly clips,hold down clips for fixing the board to frame complete all as per manufacturer's instruction,complete all as directed and specified.

M&L Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall chajja including weathering slightly rounded or chamfered angles and throating as directed including necessary formwork complete all as specified& directed by Engr-in-Charge.

M& L PCC1:2:4 type B1 (Using 20 mm graded crushed stone aggregate) to fill gap between roof sheet and wall both outer side and inner side complete all as specifed and directed

Complete removal of old decorated surface of walls plasterd or unplasterd including cornices plassters and applying two coats of OBD complete all specified and directed .

M&L 75 mm thick PCC(1:3:6) type C2 (using 40 mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified& directed by Engr-in-Charge.

M&L for suspended false ceiling system using 4mm thick 'E' Board ceiling tiles classic/designer of size 595mm x 595mm (as approved by GE) fixed with and including galvanised iron powder coated GI Grid system suspended from ceiling with provision of galvanised wire 4mm dia with butterfly clips and wall tapping screw i.e. hold down clips for fixing the board to frame complete all as per manufacturer's instructions complete all as directed and specified. (a) Size of grid - 600 x 600mm. (b) Size of main Tee - 39 x 24. (c) Size of cross Tee - 29 x 34. (d) Size of wall angle - 22.20 x 22.20

ALAKNANDA ENTERPRISES (BID ID -3396779)

Radha Enterprises (BID ID -3396708)

vandana enterprises (BID ID -3397103)

A K ENGINEERS AND SONS (BID ID -3397799)

shiva construction (BID ID -3405573)