SPL REP TO BLDG NO. T-1, WING II AND EPOXY COATING AND ANTI STATIC GRID IN HANGER NO P-25 (36/I R AND O FLT) AT AGE LEKHANAGAR UNDER GE NASIK ROAD CAMP.

Amount

Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings etc complate all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for steel Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc(Fe-410 W,grade E-250) quality B complete all as specified and directed.

M&L for preparation of new steel or untreated iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping scews as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/slabs/blankets,kitchen cabinets board any thickness, including cover fillets,frame etc.

Supply and fixing position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm with GI frame work main runner 38x24x3600mm, cross tee 25x24x600mm/25x24x1200mm and wall angle 24x24x2540mm( thickness of the materail of 0.30mm). using 4mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 4mm dia GI bar hanged from the purlins of the roof with butter fly clips complete all as specified and directed by Engr-in-Charge.

Taking down carefully MS window shutters of any size and description,making good soffits,jambs,cills etc to receive new window/ventilators frame complete all as specified and as directed.

M&L for Aluminium (minimum 50 micron powder coated) frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F aluminium(50 micron powder coated) window and ventilator shutters(3 track i.e. two glazed and one wiremesh shutter each window of equal sizes),sliding type without sash bars,aluminium sections weighing 0.55kg/m including necessary joing cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws,rollers anodised aluminium fittings required to windows fully functional.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 4.00mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F 4.00mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

Dismantling stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar.

M&L for 18 to 20 mm thick Granite(telephonic black of highest grade/quality as approved by GE) work (Table rubbed and polished) in steps,jambs,pillars,window cills,cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 18 to 20mm thick.over and including different type shade/colour all as specified and directed. Note:Granite shall be telephonic black only.In aluminium windows granite shall be used in jambs of windows,umbra etc,in 100mm width(minimum).contractors quoted rate deems to be inclusive of the said provision.

M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polshing complete.

Rounding to edges of stone slabs one edge,such as in steps,cooking platform and other similar situations(stone slabs so provided shall not be less than 900mm in length).

S&F framed work as in grill,doors or gates of angle or other section with gusset plates,braces,etc. complete,drilled for fixing of steel sheeting or other coverings,doors,etc to be prepared for hanging or sliding with and inlcluding either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides) and hanging;also fastening and fixing Fe Grade 290(Gde E-165) complete.

M&L Factory made 18 mm thick 100% Solid WPC(wood polymer composite) Prelaminated board of required size comprising of virgin PVC resin of K value value 57-60(suspension grade),Calcium carbonate and natural fibers(woos powders/rice husk/wheat husk) and non toxic additives,made from extrusion process WPC foam sheet single extruded(inner) with density not less than 650kg/cum,having good screw holding capacity(screw withdrawal strength of 200 N(Face) & 1100 N (Edge),minimum compressive strength of 50N/mm2,modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/borer free.water/moisture proof,Fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed countersunk ss crews all as per direction of engr-in-charge. Note. The quoted rate shall also be deemed to be inclusive of suitable ss handle for shutters,magnetic catcher etc.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 60x30(single/double rebated) mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.over and including M.S. hold fast/ lugs or SS dash fasteners.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing),removing debris out of MOD land and rubbish off the premises.

M&L for 40mm cement concrete type B0,1:2:4(12.5 mm graded aggregate) as in levelling course to flooring etc.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6.

M&L for coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in CM 1:4.

S&F in repairs Stainless steel sink with draining board, made out of 1.0mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm.SS sink shall be manufactured from salem stainless steel grade A1S1305.

Taking up or down steel tubing and connections 15 mm bore including bib taps,stop cock etc.

Supplying and laying of CPVC concealed pipes 20mm outside dia pipe SDR 11 & plain CPVC SDR 11 fittings in ceiling/wall/floors complete all as specified (Internal plumbing shall be concealed)

S&F auto soft closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters.

S&F ball bearing runners 450mm telescopic channel(KTS-20) full extension load capacity 50Kg.

S&F chrome plated stainless steel wire basket 5mm dia of wire (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete all as specified and as directed by engineer- in – charge.

S&F chrome plated stainless steel wire basket 5mm dia of wire (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge

S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge.

S&F chrome plated stainless steel wire basket 5mm dia of wire (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge.

S&F chrome plated stainless steel wire basket 5mm dia of wire (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thickcomplete in all respect as specified and as directed by engineer- in - charge.

Supply chrome plated stainless steel wire basket 5mm dia of wire (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. including Stainless staging work for basket of SS grade 304 Sq pipe pipe 20x20 & 1mm thick complete in all respect as specified and as directed by engineer- in – charge.”

S&F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge.

Epoxy Polyurethane Coating (EPU) Supplying and applying ESD Ployurethane Flooring System as per the following Specification:- (a) Surface preparation: preparing the existing surface of floor by using proper scarification eqpt and cleaning by wire brushing & blow etc, to remove all dirt, dust, oil etc to expose clean sound base concrete. Cost shall include any imperfections in the concrete shall be treated with suitable repair system as per manufacturer specification. Note:-(i) Material /Chemicals required for repairing crack, potholes and damaged areas shall be paid separately at supply only rates. (ii) Treatment of construction and expansion joints including filling as per manufacturer's specification and direction of Engineer-in-Charge, which shall be paid separately. (b) Primer : Supply and application of moisture insenstive solvent free epoxy bonding primer over the prepared surface (Floor/coving) in a thin continuous film and work the Primer into the surface using a stiff brush or roller. Apply second priming coat on identified light colored dry patches over first coat. (c) Base Coat/Scratch Coat : Supply and application of 1mm thick base layer with cementitious Polyurethane of self smoothing self levelling epoxy underlay spread evenly to maintain the thickness using a serrated trowel followed by spike roller, rolled over the levelled underlay to remove any entrapped air all as per manufacturer instructions and as specified.

(d) Anti Static grid : Supply and fix copper earth strip of size 25mm wide and 80 micron thick, fixed over the floor area along the perimeter and internally with a grid size of min 3mx 3m and max 5m between strips. The Surface shall be treated with aqueous anti static epoxy system, conductive under coat spread as specified and as per manufacturer's instructions. The conductivity of the under coat shall be 2 x10^3 ohms - 4x 10^3 ohms. The entire system to be connected to earth pit and testing complete. (e) Epoxy Polyurethane Coating (EPU): Providing 3 mm thick epoxy polyurethene ESD flooring, having 28 days compressive strenght as per ASTM C 109 45MPa, Flexural strenght will be 12 MPa as per BS 6319-3, Tensile strength will be 4MPa as per BS 6319-7, having surface of earth resistance < 1 x 160 Ohms. The fire resistivity of the material has to be of class 2 as per BS 476-7.

Supply only material /Chemicals required for repairing crack, potholes and damaged areas as per manufacturers speccfications.

Racking out existing construction joints/dummy joints 10mm wide x 25mm deep in concrete pavements, cleaning surfaces and sweeping to make the surface free from dust/dirt with air compressor/blower and removing debris to distance exceeding 200m from edge of pavement for disposal in low laying areas

Racking out existing Expansion joints 20mm wide x 25mm deep in concrete pavements, cleaning surfaces and sweeping to make the surface free from dust/dirt with air compressor/blower and removing debris to distance exceeding 200m from edge of pavement for disposal in low laying areas.

M&L for nosing the damaged edges of the construction joints using epoxy mortar and make joints straight and smooth, filling the joints using flexible Elastomeric sealent of Polysulphide / polyurethene make including fixing of backer rod with straight edge finish all as specifide and as directed.

M&L for nosing the damaged edges of the expansion joints using epoxy mortar and make joints straight and smooth, filling the joints using flexible Elastomeric sealent of Polysulphide / polyurethene make including fixing of backer rod with straight edge finish all as specifide and as directed.

M&L for gangway yellow line marking not exc 150 mm wide in in floors. Fixing of masking tapes on both sides of line, cleaning the surface using solvents, mixing two components high build coating in two coats of 0.50mm (min) thickness each and removing masking tapes followed by neat finish as directed.

M&L for gangway yellow line marking not exc 300 mm wide in in floors. Fixing of masking tapes on both sides of line, cleaning the surface using solvents, mixing two components high build coating in two coats of 0.50mm (min) thickness each and removing masking tapes followed by neat finish as directed.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS. 1,22,360.00 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Abhiraj Enterprises (BID ID -3159415)

MAHIMA CONSTRUCTION (BID ID -3157891)

J Sams Contructions (BID ID -3159882)