Design Manufacturing Supply Installation Testing and Commissioning of 28 No (G plus 5) 08 passengers MRL lifts at Transit Accommodation at Lethpora I Pulwama

Electric Works Supply, installation, testing & commissioning of 3 Phase- 60 kVA servo-stabilizer including oil and all allied electrical acessories with earthing. The stabiliser should have following specifications: a) Capacity: 60 kVA, 3-phase unbalanced type b) Input: (100-265) V AC P-N; (180 - 460) V AC P-P c) Output: 415 V ± 1% - phase to phase d) Supply: 3 phase, 4 wires, 50Hz e) Operation: Automatic f) Duty cycle: Continuous g) Transformer windings: Copper wound on CRGO laminations as per IS specifications h) Cooling: Oil cooled i) Efficiency: Better than 98% at full load j) Overload capacity: 15% for continuous 4 hours k) Waveform distortions: Nil l) High speed voltage correction: up to 8V to 20V per second m) Protections: Under voltage, Over voltage and Overload with time delay n) Other features: LED indicators, Digital AC ammeter, AC voltmeter, Frequency meters, Phase Sequence meters, Single phase preventer, Stabilizer by-pass arrangement.

Providing / Fitting/Testing/Commissioning of 3.5 core, 95 sqmm XLPE, PVC sheathed, armoured Al cable from Distribution Transformer to Servo Stabilizer with other accessories of suitable rating to be laid underground (in HDPE pipes) as per requirement (to be paid as per actual).

Providing / Fitting/Testing/Commissioning of 3.5 core, 50 sqmm, XLPE, PVC sheathed, Al cable from Servo Stabilizer to Control Panel with other accessories of suitable rating to be laid underground (in HDPE pipes) as per requirement (to be paid as per actual).

Providing / Fitting/Testing/Commissioning of 3.5 core, 25 sqmm XLPE, PVC Sheathed, Al cable from Control Panel to individual lifts with other accessories of suitable rating to be laid underground (in HDPE pipes) or in conduits of suitable size as per requirement (to be paid as per actual).

Miscellaneous Jobs in the Lift Shaft (to be paid as per actual) Providing and fixing of the suitable lifting/hoisting beam(ISMB-250) at the overhead of lift shaft. The job includes providing and fixing of base plates with the shaft walls by means of anchor fasteners and welding of the beam with the base plates after proper alignment. (to be paid as per actual). Job includes applying a priming coat of approved steel primer.

Supply,installation,and wiring of IP65-rated LED bulkhead lights in the lift shaft, including secure mounting, conduit wiring, connection, testing and commissioning as per approved specifications.(to be paid as per actual)

Providing and fixing of ladder fabricated out of structural steel of requisite sections at terrace for maintenance,inspection, emergency access to lift shaft etc. (to be paid as per actual). Job includes applying a priming coat of approved steel primer.

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in super structure in cement mortar 1:6 (cement :6 Fine sand) including carriage of all materials involved with loading unloading and stacking complete. (to be paid as per actual)

12mm Cement plaster of mix 1:4 (1cement : 4 fine sand) on the brick work at the shaft entrance as required (to be paid as per actual)

White washing with lime to give an even shade on new work (three or more coats) interior walls of the shaft as required (to be paid as per actual)

Providing & Laying of Beam above car door in concrete(M-30 grade) including reinforcement as required.

CRC/weather proof enclosure Providing, Construction and Fitting of 6ftX5ftX4ft CRC/weather proof Enclosure(SWG16, powder coated, with air vents) or as required at site for servo voltage stabilizer on concrete foundation/footing complete with base frame, allied fittings etc.(to be paid as per actual requirement at site)

Comprehensive Annual Maintenance Contract (CAMC). Comprehensive Annual Maintenance Contract (CAMC) of above lift which include routine, preventive & breakdown maintenance for period of ONE YEAR including repair/replacement of worn-out items with minimum downtime and warranty & guarantee of repaired/replaced items after completion of two year DLP period.