REPAIR AND POLISHING OF WOODEN FURNITURE AT MIL STN PATIALA UNDER GE(S) PATIALA

Amount

TEAPOY FD (Drg No. FD-382, FD-278) M & L for carrying out repair/replacement of following parts of Teapoy as per drawing after removing the old unservicable parts complete all as specified. Top using 18/19mm thick prelaminated particle board (Make Archid/Novapan/ECCO) ISI marked exterior grade and 6mm thick Teak wood beading all around.

Leg using Teak wood

Long rails using Teak wood

Short rails using Teak wood

Stiffeners using Teak wood

Applying two coat of french polish (ready made) after necessary preparation of surfaces of teapoy.

PEG TABLE (DRG NO.FD-384 & 277) : Repair/replacement of following parts of Peg Table as per drawing after removing the old unservicable parts complete all as specified Supplying and fixing the legs of Teak wood.

Supplying and fixing long rails of Teak wood.

Supplying and fixing short rails of Teak wood.

Supplying and fixing top of 18/19 mm thick prelaminated particle board Make (Archid/Novapan/ECCO) ISI marked exterior grade and 6mm thick Teak edging all around. .

Applying two coat of french polish to complete peg table after necessary preparation of surfaces.

TABLE BED SIDE (Drg No. FD-276) Repair/replacement of following parts of Table bed side as per drawing after dismantling the old parts complete all as specified :- Leg using Teak wood.

Sides using 12 mm thick ply wood with one side teak finish. Make (Kit ply/Duro/Green ply).

Back using 6 mm thick ply wood commercial Make(Kit ply/Duro/Green ply).

Bottom using 12 mm thick ply wood commercial Make (Kit ply/Duro/Green ply).

Shelve using 12 mm thick ply wood commercial Make (Kit ply/Duro/Green ply).

Top using 18/19mm thick pre-laminated particle board ISI Marked Make (ECCO/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE 900 x 600 x 760 mm WITH DRAWER (Drg No. FD-290) Repair/replacement of following parts of TABLE 900 x 600 x 760 mm WITH DRAWER as per drawing after dismantling the old parts complete all as specified :- Leg using Teak wood

Long rails using Teak wood

Short rails using Teak wood

Long Stiffeners using Teak wood

Short Stiffeners using Teak wood

Drawer Box using 6 mm thick ply wood commercial Make (Kit ply/Duro/Green ply).

Top using 18/19mm thick pre-laminated particle board ISI Marked Make (ECCO/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.

Drawer knobs CP

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE DINING FOR 6 PERS (Drg No FD -273) M & L for carrying out repair/replacement of following parts of Table dining for 6 pers as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick prelaminated particle board (Make Archid/Novapan/ECCO) ISI marked and providing 6mm thick Teak beading all around.

Leg using Teak wood

Long rail using Teak wood

Short rail using Teak wood

Traingluar wooden bracket 100 x 100 x 20mm thick

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE WRITING (DRG NO FD-275 & 240) Repair/replacement of following parts of Table writing as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick pre-laminated particle board ISI Marked Make (Archid/Novapan/ECCO) ISI marked and 6mm thick Teak wood edging all around.

Leg using Teak wood (MP Teak) .

Long rail using Teak wood (MP Teak) .

Drawer Box using 6 mm thick ply wood commercial Make (Kit ply/Duro/Green ply).

Shutter using 18/19mm pre-laminated particle board, Make (Archid/Novapan/ECCO) exterior grade, fixed with 2 Nos SS Hinges medium weight 75 mm all as shown in Drg.

Sides of cabinet with 18mm thick pre-laminated particle board ISI Marked Make (Archid/Novapan/ECCO)

Stiffner using Teak wood.

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE 900mmx600mm WITHOUT DRAWER (Drg No FD -284) M & L for carrying out repair/replacement of following parts of Table 900mmx600mm as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick pre-laminated particle board ISI Marked Make (ECCO/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.

Leg using Teak wood

Long side rail using Teak wood

Short side rail using Teak wood

Stiffener using Teak wood

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE DRESSING GENTS WITH MIRROR (Drg N0. FD -230) M & L for carrying out repair/replacement of following parts of Table Dressing Gents With Mirror as per drawing after dismantling the old parts complete all as specified :- Top and side complete using 18/19mm thick pre-laminated particle board ISI Marked Make (Archid/Novapan/ECCO) exterior grade and 6mm thick Teak wood beading all around.

Supply and fixing 18/19mm thick block board ISI Marked standared make (Archid/Novapan/ECCO)commercial bottom partition including 4mm thick teakwood beading.

Side and back of drawers using 12mm thick teak wood plank, bottom of drawer using 6mm thick commercial plywood, Front of drawer using 19mm thick commercial particle board over which 1.5 mm thick plastic laminated sheet is fixed and 3mm thick teak wood edging to be provided at all round of front of drawer.

Suuply and fixing mirror 5.5mm thick electro copper plated of polished plate(Make:Saint Gobain/Atul/modiguard) with frame of Teak wood and back ply all as shown on Drg.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

CHAIR DINNING LONG BACK (Drg N0. FD -357) M & L for carrying out repair/replacement of following parts of CHAIR DINNING LONG BACK as per drawing after dismantling the old parts complete all as specified :- Triangular Teak stiffner 8 Nos. of size 60x60x25 mm shall be provided to straighten joint at corner w/o long with other members.

6mm thick ply wood commercial at back (Make : National/Duro/green ply)

Stiffner using Teak wood.

S&F Seat and back of 50mm thick synthetic foam 32/40 density fixed over wooden frame covered with leathered rexine of approved.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

HAT STAND WITH MIRROR (Drg N0. FD -233) M & L for carrying out repair/replacement of following parts of HAT STAND WITH MIRROR as per drawing after dismantling the old parts complete all as specified :- S&F mirror of 5.5mm thick standard quality ATUL/Sanit Gobain duly electro copper plated on back shall be provided on the Black board.

Teak board as shown in drawing

S&F Cap stand hooks

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

STOOL DRESSING CB (Drg N0. FD -282) M & L for carrying out repair/replacement of following parts of STOOL DRESSING CB as per drawing after dismantling the old parts complete all as specified :- Supplying and fixing the legs of Teak wood.

Supplying and fixing stiffner of Teak wood.

Supplying and fixing side long rails of Teak wood.

Supplying and fixing side short rails of Teak wood.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

BED HARD PLYWOOD TOP (Drg FD-246) M & L for carrying out repair/replacement of following parts of Bed hard as per drawing after removing the old unsv parts complete all as specified and shown on drgs. Long rails using 1st class hard wood.

Short rails using 1st class hard wood.

Head board using Teak wood

Foot board using Teak wood

Top using 12mm thick commercial plywood, Make (Kitply/Duro/Green/National Ply) ISI marked.

Teak face ply of 4mm thick for head wing board.

Teak face ply of 4mm thick for foot wing board.

Stiffners using Teak wood

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE OFFICE OFFICER's WOODEN (Drg DB-4114) M & L for carrying out repair/replacement of following parts of TABLE OFFICE OFFICER's WOODEN as per drawing after removing the old unsv parts complete all as specified and shown on drgs. S & F Top 5'x3' made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make : Archid/Novapan/ECCO ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

Legs using 1st class hard wood.

Stiffners using 1st class hard wood.

Front rails using 1st class hard wood.

Side rails using 1st class hard wood.

Drawer made of 1st class hard wood as per drawing.

Brass lock as per dwg.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE OFFICE CLERK WOODEN (Drg DB-4280) M & L for carrying out repair/replacement of following parts of TABLE OFFICE CLERK WOODEN as per drawing after removing the old unsv parts complete all as specified and shown on drgs. S & F Top 54'x36' made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II, Make : Archid/Novapan/ECCO ISI marked fixed with mild steel screws as per size and shape including 4mm thick teak wood beading all around.

Legs using 1st class hard wood.

Stiffners using 1st class hard wood.

Front rails using 1st class hard wood.

Side rails using 1st class hard wood.

Drawer made of 1st class hard wood as per drawing.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

SIDE BOARD (Drg No FD-241) M & L for carrying out repair/replacement of following parts of Side Board as per drawing after dismantling the old parts complete all as specified Top made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : ECCO/Archid/Novapan ISI marked fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.

Leg using Teak wood (MP Teak) .

Back made out of 6mm thick commercial ply wood, Make (Kit ply/Duro/Green ply).

Side using 19mm thick prelaminated particle board Make : Archidlam/ Novapan/ ECCO, ISI marked.

Front of drawers made out of 19mm thick prelaminated particle board.

Door shutters using of 19mm thick prelaminated particle board fixed with continous piano type hinges.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE DRESSING LADIES WITH MIRROR (Drg No FD -251) M & L for carrying out repair/replacement following parts to table dressing ladies with mirror, complete all as specified and shown on drgs after removing the old broken part. Supply and fixing mirror 5.5mm thick electro copper plated of polished plate(Make:Saint Gobain/Atul/modiguard) with frame of Teak wood and back ply all as shown on Drg.

Top of table using of 19mm thick particle board decorated with phenol formal dehide with laminated sheet 1.5mm thick for one side, Make (Archid/Novapan/ECCO) including 6 mm thick teak wood beading all around.

Leg using Teak wood (MP Teak).

Side and back of drawers using 12mm thick teak wood plank, bottom of drawer using 6mm thick commercial plywood, Front of drawer using 19mm thick commercial particle board over which 1.5 mm thick plastic laminated sheet is fixed and 3mm thick teak wood edging all round of front of drawer.

supply and fixing plane sliding glass 5mm thick and aluminum channel having two 'U' shaped.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE CENTRE/TABLE CENTRE TWO TIER (Drg No FD-274) M & L for carrying out repair/replacement following parts to table centre, complete all as specified and shown on drgs after removing the old broken part. Top 900x450mm made out of 18mm thick prelaminated particle board exterior grade, phenyl formaldehyde bonded, flat pressed three layer BWR type-II, Make : Archid/Novapan/ECCO ISI marked fixed with mild steel screws as per size and shape including 4mm thick Teak wood (MP Teak) beading all around.

Leg using Teak wood

Long rail using Teak wood

Short rail using Teak wood

Stiffeners of 2 tier table using Teak wood (MP Teak) .

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE DINING FOR 8 PERSONS (Drg No FD-273) M & L for carrying out repair/replacement following parts to table dining for 8 persons, complete all as specified and shown on drgs after removing the old broken part. Top 1800x900mm made out of 18/19mm thick prelaminated particle board exterior grade, Make - Archid/Novapan/ Ecco) ISI marked and including 4mm thick teak wood beading all around.

Legs using Teak wood

Long rails using Teak wood

Short rails using Teak wood

Traingluar wooden bracket 100 x 100 x 20mm thick

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

SOFA SET THREE SEATER/SINGLE SEATER WITH DETACHABLE CUSHION (DRG NO FD-281 / FD -373 Repair/replacement of following parts of Sofa set three seater /single seater with detachable cushion as per drawing after dismantling the old parts :- Long rails of seat for three seater sofa of size 1590mmx100mmx35mm of 1st class hard wood

Side rail of size 575mm x 100mm x 35mm. of 1st class hard wood

Long rails of seat for three seater sofa of size 1590mmx70mmx35mm of using 1st class hard wood

Side rails of seat of size 575mmx70mmx35mm of using 1st class hard wood

Back of single seat of size 575mm x 100mm x 35mm. of 1st class hard wood

Arms for Single / Three seater sofa of size 35mm x 70mm (cross section) of 1st class hard wood

Batten for Single / Three seater sofa of size 50mm x 20mm (cross section) of 1st class hard wood

Applying two coats of French polish (ready made) to sofa three seater necessary preparation of surfaces to sofa three seater

Applying two coats of French polish (ready made) to sofa single seater after necessary preparation of surfaces to sofa single seater

Sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth not less than Rs. 180/- per meter as approved by GE. MAKE : SLEEP WELL/COOL FOAM/FEATHER FOAM.

Foam Cushion cover only duly stiched and one side Jip size 530 x 560 mm as per sample approved by engineering in charge.

CHAIR WRITING (Drg No. FD-280 & FD-250) M & L for carrying out repair/replacement of following parts to chair writing, complete all as specified and shown on drgs after removing the old broken part. Front Legs made out of Teak wood

Rear Legs made out of Teak wood .

Front Rails made out of Teak wood .

Side Rails made out of Teak wood .

Back Rails made out of Teak wood .

Arms made out of Teak wood

Stiffners made out of Teak wood

Applying two coat of french polish to Chair writing/CBA after preparation of surface complete all as specified.

CHAIR DINING (DRG NO FD-279) Repair/replacement following parts to Chair dining complete all as specified and shown on drgs after removing the old broken part :- Front Leg using Teak wood

Rear Legs made out of Teak wood .

Front Rails made out of Teak wood .

Side Rails made out of Teak wood .

Back Rails made out of Teak wood .

Stiffener using Teak wood

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

CHAIR EASY (DRG NO. FD-229) Repair/replacement of following parts of Chair Easy as per drawing after dismantling the old parts :- Leg using Teak wood

Front Rails of seat made out of Teak wood .

Rear Rails of seat using Teak wood

Side Rails of seat using Teak wood

Rear Rails of back using Teak wood

Side Rails of back using Teak wood

Arms using Teak wood

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

M&L for removing old broken cane and recanning with plastic cane (oval shape) 2mm wide and border with 3mm wide cane complete as per Godrej pattern using Make : SHAH/PREMIER brand cane to the following furniture articles:- Chair writing (Drg No FD-280 & FD-1107)

Chair dinning (Drg No FD-279)

Stool dressing CB (Drg No FD-282)

Chair Easy (Drg No FD-229 & FD-1108)

BOOK CASE SMALL (Drg No FD-237) M & L for carrying out repair/replacement of following parts of Book case as per drawing after dismantling the old parts complete all as specified Short rail using teak wood

Long rail using Teak wood

Top made out of 19mm thick prelaminated particle board exterior grade, Make : Archidlam/ Novapan/ECCO ISI marked and 4mm thick teak wood beading all around.

Shelf left Side made out of 12 mm thick commercial ply wood Make (Kitply/Duro/Green/National Ply) ISI marked.

Other side made out of 18/19mm thick particle board. Make : Archidlam/ Novapan/ECCO

Leg using Teak wood

Shutter with knob of one ball spring

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

Table 900 x 900mm (Drg No FD -88 / 291) M & L for carrying out repair/replacement of following parts of Table 900mmx900mm as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick pre-laminated particle board ISI Marked Make (ECCO/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.

Leg using Teak wood

Stiffener using Teak wood

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

TABLE DINING 120 X 90 CM (Drg No FD - 284) M & L for carrying out repair/replacement of following parts of TTABLE DINING 120 X 90 CM as per drawing after dismantling the old parts complete all as specified :- Top using 18/19mm thick pre-laminated particle board ISI Marked Make (ECCO/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.

Leg using Teak wood

Long side rail using Teak wood

Short side rail using Teak wood

Stiffener using Teak wood

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

Modern Enterprises

Arneja Builders