REPLACEMENT OF UG WATER SUPPLY PIPELINE IN MANDIR LINES AND REPLACEMENT OF LT PANEL WITH CONNECTED ACCESSORIES, PROVN OF TOILETS IN ATA AND OTHER SANCTIONED WORK AT CMM UNDER AGE B/R-I AND AGE E/M OF GE (EAST) JABALPUR

Amount

Surface excavation in hard/ dense soil n.exe 30 cm deep and averaging 15 cm deep and getting out soft loose soi and including removing all rubbish material, surplus soil outside of MD land.

Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr depth for foundation, laying of cables, poles etc and getting out in hard/dense soil complete all as specified & directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate foundation filling mass concrete.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering.

M&L for hard core of gauge n.exc 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surfaces of broken stone or boulder complete all as specified and directed.

S&F tor steel or TMT bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including M.S wire ( annealed) not less than 0.9 mm dia.

S&F TMT bars 5mm dia and over upto and incl 10mm dia, cut to length, bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including M.S wire ( annealed) not less than 0.9 mm dia as in stirrups, spacer and binders.

M&L RCC M-25 (Design Mix) (20mm graded aggregates) as in foundation, footing, foundation beam, plinth beam and base for column all as specified and directed.

M&L RCC M- 25 (Design Mix) (20mm graded aggregates) as in columns all as specified and directed.

M&L RCC M- 25 (Design Mix) (20mm graded aggregates) as in beams all as specified and directed.

M&L RCC M-25 (Design Mix) (20mm graded aggregates) as in slabs support on walls, beams and columns in floors, roof landings, balconies, canopies, deck slabs and in shelves all as specified and directed.

Use & waste for flat formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits if any of foundations and plinth beams and similar work, etc, rough finished surfaces of concrete etc all as specified and directed.

Use & waste for form work to sides of pillars, posts struts, piers columns and stanchions, square, rectangular or polygonal rough finished surfaces of concrete etc all as specified and directed.

Use & waste for flat formwork to sides and soffits of floor or roof beam hunchings, girders bresummers, lintels, cantilevers, shelves, including supports overhangs etc also splays between floors and beams etc, rough finished surfaces of concrete etc all as specified and directed.

Use & waste for flat formwork to soffits of suspended slabs such as in roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) etc rough finished all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified & directed.

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.50 mtr above the starting point complete all as specified & directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified & directed.

M&L for Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified & directed.

Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` bricks laid dry and flat complete all as specified and as directed.

M&L plastering in CM (1:6) 10mm thick on brick masonry walls and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick/concrete surfaces fished even and smooth without using extra cement.

M&L rendering 5 mm thick on fair faces of concrete surfaces in CM 1:3 on ceiling finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in path/plinth protection finished even and fair incl expansion joint at every 3.0m interval and every corner complete all as specified and directed.

M&L glazed ceramic coloured/designer tiles in vertical surface of wall 350 x 250 x 7mm/450 x 350 x 7mm thick laid over & including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match complete all as specified.

M&L non skid ceramic coloured/designer tiles 7 to 8 mm thick (square rectangular ) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors and 25 mm thick PCC type B-1 1:2:4 (20 mm graded aggregate) laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match.

S&F Solid PVC Single door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core supplying & fixing in frame at site as per specification & drawing.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete.

S&F mild steel frame work such as grills, grating framed guard bar with ends of bars shouldered and / or riveted and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S&F figered glass, pin headed type in squares 3 mm thick not exc 0.50 Sqm in each panes and glazing with oil putty etc complete all as specified and directed.

S&F aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long.

S&F aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long.

S&F extruded aluminum alloy handles, fabricated type, anodized 150 mm long.

S&F Butt hinges, medium weight, cold rolled mild steel and fixed 100 mm long.

S&F vitreous China wash basin, white, flat back, size 630 x 450mm excluding taps, chain and plug and porcelain stopper but including brackets, waste pipe.

S&F in 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with 20mm thick screed bed in CM 1:6.

S&F 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F 15mm dia bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid in trenches 20mm bore complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, excluding flushing cistern, flush pipe etc but including plastic water closet seat, white closed pattern with flat bottom, cover and mild steel as fixed.

S&F 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, pull or push type including brackets complete all as specified and directed.

S&F vitreous China bowl urinal flat back, size of 465 x 355 x 265mm white (minium), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe).

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms).

S&F in repair Tubular towel rail 20mm dia, D type, 60cm long between flanges.

S&F 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F health faucet with 1 mtr Tube along with hook complete all as speciifed

S&F 15 mm dia stop valves/angle cock, cast copper alloy fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

S&F 20 mm dia ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed.

PVC (SWR) floor trap75mm, with grating including jointing with solvent cement.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F 110 mm dia PVC (SWR) bends any radius.

S&F 75 mm dia PVC (SWR) bends any radius.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrom primer, complete all as specified and directed.

M&L preparing plastered/unplastered new surfaces of walls and applying three coats of white wash on walls as specified and directed by Engr-in-Charge.

M&L preparing plastered/ unplastered new surfaces of walls and applying two coats of cement base paint over alkali resistant primer complete all as specified and directed.

M&L Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

S&F in Soap dish, vitreous China white, approximate size 160 x 160 x 90mm.

S&F PVC connections 15mm size with PTMT nuts of length 450mm long.

Septic tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete for 25 users complete all as specified and directed.

Supplying and laying of UPVC pipes (SCH-40) 150mm dia incl jointing with coppler complete.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application complete all as specified & applying one coat of aluminium paint on non approachable roofs.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per square meter including cleaning surfaces on both approachable/non approachable roofs.

M&L for 100mm thick PCC 1:4:8, type D2, using (40mm graded stone aggregate) as in sub- base floor.

M&L Stone kerb of machine pressed ruubber moulded coloured precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate, block of size 30cm x 30cm x 15cm finished at top bullnosed shape and finished surface even and smooth using coloured pigment and jointed in CM 1:6 struck finished, applying two coats of paints in zebra pattern as directed by Engr-in-Charge.

M&L applying two coats of synthetic enamel paints in zebra pattern for stone kerb as directed by Engr-in-Charge.

M&L for machine pressed rubber moulded precast concrete Interlocking paver block glosy finish in grey cement with pigment confirming to IS 15658-2006 of 60mm thickness M-35 Grade, of size shape colour and pattern as directed laid over and including 50 mm thick sand cushion completed in two layer of 25 mm each with joint filled as specified and directed.

S&F machine pressed rubber moulded coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment bedded and laid over and including 50 mm thick sand cushion compected in two layer of 25 mm each with joint filled as specified and directed.

Excavating in post holes (or similar holes) in hard/dense soil each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

M&L cement concrete (1:3:6) type C1 (20mm graded stone Aggregate) as in embedding of angle iron post all as per specified and directed.

S&F steel work in tubular trasses including special shaped washer using ERW or induction butt welded tubes of any shape as directed conforming to IS 1161-1979 grade St -240.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of grade Fe-410- W(Gde- E-250) also welding, fastening and fixing complete.

S&F Mild steel screw bolts (machine made) 11 to 15mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.60 mm (Profiled) thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall of mangalore pattern design, fixed with self tapping screws as specified & directed.

S&F mild steel flat iron as in wind tie for roof including securing bolts.

S&F 25mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs 15 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Supply Integral waterproofing compound complete all as specified and directed (ISI marked).

Supply and lay pipe galvanized, “Medium Grade”, including fittings of 50 mm bore of tube to laid in trenches not exc 1.5 mtr depth to connecting main lines or branches completely all as specified and directed.

Supply and lay pipe galvanized, “Medium Grade”, including fittings of 40 mm bore of tube to laid in trenches not exc 1.5 mtr depth to connecting main lines or branches completely all as specified and directed.

Supply and lay pipe galvanized, “Medium Grade”, including fittings of 25 mm bore of tube to laid in trenches not exc 1.5 mtr depth to connecting main lines or branches completely all as specified and directed.

Supply and lay pipe galvanized, “Medium class”, including fittings of 20 mm bore of tube to laid in trenches not exc 1.5 mtr depth to connecting main lines or branches completely all as specified and directed.

Supply and lay pipe ductile Iron, S/S including specials, Class “K-7”, 150 mm bore in any length, laid in trench. Note : All fittings, accessories i.e bends, Tee etc measured and paid separately under relevant items.

Supply and lay pipe galvanized, “Medium Grade”, including fittings 80 mm bore of tube to laid in trenches not exc 1.5 mtr depth to connecting mai lines or branches completely all as specified and directed.

Note for Srl item No 87 to 92. All excavation, earthwork, returning filling, removal shall be measured and paid separately under relevant items.

Taking down of GI/DI Pipe of any size/capacity in any position complete all as specified and directed by Engr-in-Charge.

Supply and fix gun matel gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size, 80 mm bore of pipe all as specified and directed by Engr-in-Charge.

Supply and fix gun matel gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size, 20 mm bore of pipe all as specified and directed by Engr-in-Charge.

Supply and fix gun matel gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size, 25 mm bore of pipe all as specified and directed by Engr-in-Charge.

Supply and fix gun matel gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size, 40 mm bore of pipe all as specified and directed by Engr-in-Charge.

Supply and fix gun matel gate valve with iron wheel head, screwed both ends for iron pipe and fixed of size, 50 mm bore of pipe all as specified and directed by Engr-in-Charge.

Taking down gun metal gate valve of any size/capacity complete all as specified and directed.

Supply and fix Valves, Sluice, flanged of class 1.60 PN, 80 mm bore of all as spesified and directed by Engr-in-Charge.

Supply and fix Valves, Sluice, flanged of class 1.06 PN,150 mm dia all as spesified and directed by Engr-in-Charge.

M&L for shifting of 320 KVA transformer from receiving point to Offrs Mess with all arrangement and with connection and shifting of 200/160 KVA transformer from Offrs Mess to receiving point complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 500 Sq mm 3.5 core complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sq mm 3.5 core complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sq mm 3.5 core complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sq mm 4.0 core complete all as specified and directed by Engr-in-Charge.

Supply, Installation, test and Commissioning CPRI APPROVED factory fabricated, out door type, LT FEEDER PILLAR BOX of size not less then 1.5 m width x 1.2 m heigth x 0.6 m depth, made out of 3.15 mm thick CRCA Sheet with projected Globe roof for rain water protection Dust and Vermin Proof, Double door with both side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embedded with 50 x 50 x 6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete with internal connection with suitable size of cable, cable lugs and cable glands PCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation including complete all as specified and comprising of the following :-

(a) Aluminum bus bar 1200 Amps - 01 Set

(b) MCCB 630 A 35 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu - 1 Nos (I/C).

(c) MCCB 250 A 35 KA, 3 POLE, thermal magnetic relese, Ics=100% Icu - 1 Nos (O/G).

(d) MCCB 63 A 25 KA, 3 POLE, thermal magnetic relese, Ics=100% Icu - 6 Nos (O/G).

(g) LED TYPE indicator lamp 1 Set (set of three for R, Y, B).

(h) Astronomical, Multifunctional digital time swithces - 1 Nos.

(j) Power contactor ML-4, 3 pole rating not less than 70 A with 230 coil - 1 Nos.

(k) MCB SP 6 amps - 1 Nos.

Supply, Installation, test and Commissioning CPRI APPROVED factory fabricated, out door type, LT FEEDER PILLAR BOX of size not less then 1.2 m width x 1.2m heigth x 0.6 m depth, made out of 3.15 mm thick CRCA Sheet with projected Globe roof for rain water protection Dust and Vermin Proof, Double door with both side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embedded with 50 x 50 x 6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete with internal connection with suitable size of cable, cable lugs and cable glands PCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation including complete all as specified and comprising of the following :–

(a) Aluminum bus bar 500 Amps - 01 Set.

(b) MCCB 250 A 35 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu - 1 Nos (O/G).

(c) MCCB 63 A 25 KA, 3 POLE, thermal magnetic relese, Ics=100% Icu - 6 Nos (O/G).

(f) LED TYPE indicator lamp 1 Set (set of three for R, Y, B).

Unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : Maesurement shall be done after puning down of sand.

Supplying and laying un-reinforced precast, concrete cable cover, class LV, type I, flate, 250mm x150 mm x 40 mm all as spesified and directed by Engr-in-Charge.

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Make of cable -Havells/Poly cab/ Anchor & Make of PVC conduit & conduit accessories - AKG/Bhagwati. Note : (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Rate is inclusive of Cutting/chases of wall/floor/ceiling.

One light point controlled by one, one way switch.

One ceiling /exhaust fan point controlled by one switch and regulator.

One 3 pin 5 amps socket out let point on independent board.

All as per srl item No 111 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

S&F Switch piano flush type single pole one way 5 amps.

S&F Switch socket combination 5 Amps 5 pin flush type.

S& F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal .

S&F Ceiling rose, surface bakelite 65 x 50 mm three terminal.

S&F Lamp holder insulated body with back plate for angle holder all as per specified.

S&F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly energy efficient ready to use pack,1 x 20/18 Watt, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc with all assoceries intenallt prewired & including coneecting up with 2 core flexible copper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75 x 75mm - 2 Nos etc. Make- Orient Electric/Bajaj/Havells/Halonix.

S&F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly Energy efficient ready to use pack, 1 x 10 Watt, 2 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc with all assoceries intenallt prewired & including coneecting up with 2 core flexible copper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75 x 75mm - 2 Nos etc. Make- Orient Electric/Bajaj/Havells/Halonix.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver. Make-Havells/Bajaj/RR Kabel.

MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail, 240 Volts SPN with 8 way Double door IP-43-IK09 protection grad. Make- Havells/Indo Asian/HPL.

Supply & fixing amp rating MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32 Amps

Supply & fixing MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating.

Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm (3/2”) dia including cutting, chasing, making holes as required to make connection of pipe from PVC tank to geyser as per site requirement including one tap all as specified and directed by Engr-in-Charge.

Supply & Fix 10 Litre (White/Blue colour) storage geyser with LED indicatorwith colour changing, ABS body, stainless stell inner tank of 304 grade working with 8 bar pressure, ISI Marked and ISI cerification with all accessories all as specified and directed by Engr-in-Charge. make Havells Instanio 10 Litre Storage Water Heater with Flexi Pipe and Free installation (White Blue) or Bajaj 10 Litres Vertical Storage Water Heater with Multi Function Safety Valve, Majesty PC Deluxe, Multicolor or Racold Eterno Pro 10Litres Vertical 5 Star water heater.

Schedule of credit amount of Rs. 1,03,586.00 to be deducted during AOC

a k builders