Construction of Addl Smart Class Room Building of Regional H.S. School, Rambag in the district of Jajpur under Deposit Scheme for the year 2025-26

Civil Works - Single Under ream 375mm dia Pile foundation with RCC -M300 using 12mm size black hard granite chips including cost of boring but excluding cost of MS/Tor steel and labour charges for cutting, bending and binding of steel etc complete.

Earth work in excavation of foundation in all kinds of soil with all leads and lift including rough dressing breaking clods and leveling bed and epositing the excavated materials away from the working area etc. complete as direction of E.I.C. Building Proper (Ground Floor)

Approach Road

Providing and filling manually with approved quality of sand in layers not exceeding 150mm thick including all labours, watering required for the work including cost, conveyance,royality and taxes T&P etc. for finished items of works etc. complete as direction of E.I.C. Building Proper (Ground Floor)

Approach Road

Providing cement concrete (1:3:6) mix with 40mm nominal size C.B stone aggregate in foundations upto a depth of 1.50 m. below ground level and upto a height of 1.50m. above ground level / bed level including cost and conveyance of all materials to site complete as direction of E.I.C. Building Proper (Ground Floor)

Approach Road

R.C.C. work in cement concret M20 using 12mm size hard granite chips for following items of work .with cost, Conveyance , royality,taxes of all material and labour, T & P etc.complete. Ground Floor Pilecap

Column & Beam

Lintel

Chajja

Stair Case

Roof slab

First Floor Column & Beam

Lintel

Chajja

Roof slab

Fly ash Brick masonry in C.M (1:6) in F&P including cost of paint .with cost, Conveyance , royality,taxes of all material and labour, T & P etc.complete. Ground Floor

Fly ash Brick masonry in C.M (1:6) in superstructure including cost of paint .with cost, Conveyance , royality,taxes of all material and labour, T & P etc.complete. Ground Floor

First Floor

Supplying cutting, bending, straightening,placing & binding of uncoated HYSD bar reinforcement complete as per drawing and technical specification with cost, Conveyance , royality,taxes of all material and labour, T&P etc.complete.etc. complete complete Ground Floor

First Floor

12mm (1/2") Cement Plaster (1:6) for Brick work including cost of all materials,labour,T & P required for the work as per the direction of the Engineer-in-Charge. Ground Floor

First Floor

16mm (5/8") Cement Plaster (1:6) for Brick work including cost of all materials,labour,T & P required for the work as per the direction of the Engineer-in-Charge. Ground Floor

First Floor

6mm thick Cement plaster (1:4) for RCC Surface finished smooth including closed deep chipping and slurry treatment including all charges etc complete as per direction of the Engineer-in-charge. Ground Floor

First Floor

Finishing walls with water proofing weather paint of approved shade on new work 2 coats to give an even shade including including cost of paint etc. complete as per direction of the Engineer in charge Ground Floor

First Floor

Finishing wall surface with acrylic wall putty ( water Based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete. Ground Floor

First Floor

Wall Painting Two coats with plastic emulsion paint of approved shed on new work to give an even shade excluding cost of Paint Ground Floor

First Floor

Supplying, fitting afixing of stainless steel of 304 grade of M.S doors & Windows with frame and windows grills including cost, Conveyance , royality,taxes of all material and labour, T & P etc.complete. Ground Floor

Supplying, fitting and fixing of two coat track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. Ground Floor

Supplying, fitting and fixing of openable UPVC door with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. Ground Floor

Painting two coats over a coat of primer with any approved paint on new iron work including cost conveyance,taxes of all materials to site and all labour charges complete. Ground Floor

Providing, Laying and Fixing RCC Ventileter including cost conveyance,taxes of all materials to site and all labour charges complete. Ground Floor

Supplying, fitting a fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. Ground Floor

Providing, fitting & fixing of wall panelling made out of 19mm thick BWR plywood and 1mm thick laminate including all cost, conveyance, labour, royalty, taxes of the materials with T&P required for the work with hire charges of machinery etc complete as per the direction of the Engineer-In-Charge. Ground Floor

Fixing tiles in floors treads or steps and landing (Vetified tile) on 25mm thick bed of cement mortar (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of pre Ground Floor

Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as per th Ground Floor

Fixing Kota tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. complete in all respect as per the direction of Engineer in Charge. Ground Floor

Supplying, fitting and fixing of PVC Door Ground Floor

Construction of un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M-30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction, expansion and construction joints, applying sealant, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification as per direction of the Engineer-in-Charge. Approach Road

Providing & laying of precast interlocking concrete block of 80mm thick of approved design and filling the joints with sand on the prepared surface including frame work where necessary ramming using vibrator to proper slope and levelling curing with cost, conveyance taxes royalty labour of all materials and hire and running charges of machinaries T&P required for the work as per the specification and direction of Engineer-in-charge. Approach Road

EI Works Wiring Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A

-do- Group B

-do- Group C

Recessed wiring to Fan Point in... -do- Group B

-do- Group C

S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.

S/F of Angle holder replacing Ceilling Rose

Swich Boards S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board

S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.

S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection

S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 4 Modular box with base & cover

12 Modular box with base & cover

Sub-Main Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1)

Inverter wiring (1x1.5smm) Copper wire (1.19.1)

Circuit Breakers S/F of C series SP MCB of 10 to 32A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens)

S/F of C series DP MCB of 32 amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens)

Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of MCB 8 way Double door (Make : Legrand / Hager / Scheider / Seimens) (Analysis attached)

Earthing Supply & laying 8 SWG Cu wire in recess for loop earthing as required (3.18)

Fittings S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab / Klite / Panasonic)

Supply and fixing of 1200mm A.C. Ceiling fan (5 star) 28 watt BLDC with all accessories and connections with out fan regulator (Make:Usha-Techinix ISI /Crompton- Energion Groove/Havells-Efficiencia Neo/ Anchor- Eco Breeze Urban/Orient-Eco Tech Supreme/ Pollycab -Affeciente Neo )

S/F step type modular fan regulator

Supply and fixing of 90 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic )

S/F of 10w Watt LED Bulb ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic )

S/F of 2000VA/24V Invertor machine with 2 nos 180Ah tall tubular Battery including Trolly (Make-Luminous /microtek/v-guard)

Provision of Armoured cable size 2x6sqmm (15)

Laying of MV cable upto 25sqmm in ground (5.1.1)

Laying of MV cable upto 25sqmm on surface (5.5.1)

Provision of 2.5mmsq 3 core PVC insulated and FR PVC Round sheathed Copper conductor (Flexible industrial cable),1100 volt conforming to IS 694 (Make: Polycab/ KEI / Havells)

S/F of 40mm HDPE pipe for laying of cable & protection.

Panels Supply & fixing of 63A DP Panel board 1. 63A 2P MCB (Make : Legrand / Hager / Scheider / Seimens)-1no 2. 63Amp Copper Bus-bar -1set 3. 16A DP MCB-2Nos. 3. Indicating Lamp and 63Amp Heavy duty DP PVC Connector-1No. 4. All accesories & Connection (Rating & Danger borad)

Supply & fixing of Timer Panel board 1. 32 A DP MCB (Make- Legrand/Seimens/L&T/C&S/)-1No. 2. 12 A 3Pole Power Contractor-1no 3. 3Module Anologe Timer Switch (Make: L&T / C&S / Havells)- 1nos 5. 6mmsq Copper wire for internal wiring and indicating lamp with loggle switch 6. All accesories & Connection ( Danger borad)

Area lightings Supply & Instalation of 7 meter HDG octagonal Pole shall be designed to withstand the maximum wind speed as per IS 875.(Top 70 mm & Bottom 130mm of 3 mm thick) The poles shall with average coating thickness of 70 micron.The pole shaft shall have octagonal cross section and shall be continuously tapered with single longitudinal welding with Four arms detachable ring type Bracket suitable to hold lights symmetrically. The Base Plate (225X225X16mm) with 4 nos of plinth Foundation bolts(20 mm dia 700mm Length) to be mounted on concrete Foundation (1.5'X1.5'X4' high) usng HYSD steel reinforced for errection of Pole firmly as per direction of Engineer in Charge. (Make: Utkarsh/RR Ispat/Vakrangee)

P.H Works Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.(a) Initial lift upto 1.5 mtr

From 1.5 mtr to 3.0 mtr depth

Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials,labour, T&P and providing Brick work with Fly ash Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and making M.S. Step Iron in 12mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing 110mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.

Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C. (a) 110mm diameter U-PVC SWR pipes

110mm U-PVC P-trap

110mm U-PVC SWR Single junction door

110mm U-PVC SWR Double junction door

110mm U-PVC SWR door bend

110mm U-PVC SWR Offset

110mm U-PVC SWR plain bend

110mm U-PVC SWR vent cowl

125 mm dia C.P Grating

75mm diameter U-PVC SWR pipes

75mm U-PVC SWR Plain bend

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.a) Ground Floorl

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.

supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.(a) 375 mm thick wall

250 mm thick wall

Supplying all materials, labour, T&P and laying in trenches U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and providing bed concrete in P:C:C (1:4:8) using 40 mm size metal and haunch top the pipe with refilling of trenches etc all complete as per P.H specification and direction of the E.I.C.(a) 110 mm dia PVC Pipe all round

Supplying all materials, labour T&P and fixing Water closet, (Orissa pattern squating pan) duly embeded in c.c. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C. a) 580mm Orissa pan (Neycer/Cerra/ Parry ware/ Hindware)

Supplying all materials, labour, T&P and fixing wash down water closet(E.W.C) with integral 'S' or 'P' trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) & PVC Seat cover etc all complete as per specification and direction of the E.I.C. (a) EWC with Seat Cover(Hindware/Parryware)

Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipeby means of white lead mixed with chopped hemp etc all complete as per specification and direction of the E.I.C. (a) Porcelain half stall urinal

Supplying all materials, labour, T&P and fixing glazed earth ware squatting plate size (600 x 350x100/ 450x355x100) mm with integral flushing pipe including embedding the plate in 25 mmC.M (1:8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C.(a) Squatting Urinal

Supplying all materials, labour, T&P and Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C

Supplying all materials, labour, T&P and fixing the Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C. (a) Inside size 760mm x 760mm x 460mm

Addl depth of 0.15mtr to 0.90mtr

Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.(a) 250mm x 250mm Size

Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.(a) 1.20 m diax 2.0 m deep soakway pit

Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.(a) 0.91 m diax 2.10 m deep soakway pit

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I. pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.(a) 25mm dia C-PVC pipes(Internal)

15mm dia C-PVC pipes(Internal)

supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking GI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.(a) walls

supplying all materials, labour, T&P and cutting grooves in pucca Floors, and walls for taking G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:3:6) including finishing with 12mm C.P (1:3) complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.

Supplying all materials, labour T&P and fixing wash basins with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C.(a) 550mmx400mm W.H.basin

Fixing of Pedestrial for W.H.B

Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.(a) Mirror with plastic moulded frame

Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. (a) 20mmx450mm long CP towel rail

Towel Ring

Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. (a) CP soap holder

Supplying all material, labour T&P and fitting,fixing of standard size Glass shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and direction of E.I.C.

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I. pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.(a) 25mm dia PVC pipes

32mm dia PVC pipes

Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.(a) 15mm dia CP(S.B) Bib Cock (Jaquar Make)

15mm dia CP Angle Stop Cock (Jaquar Make)

15mm dia CP Concealed Stop Cock (Jaquar Make)

15mm dia CP Pillar Cock (Jaquar Make)

15mm dia CP Two in One Bib Cock (Jaquar Make)

15mm dia CP Health Fluccet (Jaquar Make)

25mm dia PVC Full Way Valve

32mm dia PVC Full Way Valve

15mm dia urinal spreader

15mm dia CP Extension Nipple

15mm dia CP Flange

Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. (a) 10 lit PVC L/L Cistern

Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a) 2000 lits capacity on the roof of (Ground loor)

Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a) 2000 lits capacity on the roof of (Ground floor)

Sinking of 125mmx50mm dia tube well through hand boring method. Supplying all materials labour T&P and setting up boring equipments including erection of suitable staging for installation of required size of tube well dismantling and removing the same after completion of the work including transportation of boring equipments, cleaning and leveling the site excavation of mud pit channels, etc. all comp as per dir of EIC.Setting for depths from 0 mtr to 100 mtr

Supplying all materials labour T&P and transportation of boring pipe, top casing grouting pipe, PVC pipe and fitting pvc well screens, cement bentonite and gdravels etc from sectional store to the site and return of departmental material after use including loading and unloading etc. all complete as per dir of EIC. (Current schedule of rate)

Supplying all materials labour T&P and drilling pilot bore not less than 102 mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc withdrawing the boring pipes, washing and keeping the bore clear for logging if required all comp as per dir of EIC

Supplying all labour Tools and plant and plant and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing thebore by means of pipe cylinder etc. all complete as per direction of EIC. (i) Reaming from 100mm to 150mm dia, 0.0mtr to 360mtr

(ii) Reaming from 150mm to 200mm dia, 0mtr to 360mtr

Supplying all labour, tools and plant and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of EIC.

Supplying all labour tools and plant and jointing materils and lowering the pvc casing pipes, fittings and well screens in jposition, including fitting and fixing of centraliser cutter plug and washing the bore etc. complete as per the direction of EIC. (i) Lowering 125mm dia pvc casing & Strainer pipe

(ii) Lowering 50mm dia pvc casing & Strainer pipe

(iii) Cost of 125mm dia 80Sch PVC Pipe

(iv) Cost of 50mm dia PVC Pipe

(vi) Cost of 50mm dia pvc strainer pipe

Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in thebore around the 50mm dia pvc casing pipe etc. all complete as per the direction of EIC excluding the cost of cement.

Supplying all labour, tools and plant and packing the bore with washed gravel (size P-6) around the pipes in good quality excluding cost of gravel etc. all complete as per the direction of EIC.

b) Labour charges

Supplying all labour tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3mtr of 125/100mm dia pvc casing pipe properly as per the direction of EIC (excluding the cost of cement)

b) Labour charges

Supplying all labour, tools and plant and materials for cealing and developing the tube well with compressor continously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of EIC

Please Enable Macros to View BoQ information