Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.8 LAccepted-AOC NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹28.3 L+₹6.9 L (32.1%)Rejected-Finance 2 EVEREST VIHAR PT T N MISHRA MARG NIRMAN NAGAR JAIPUR 302019 | JAIPUR | RAJASTHAN | 302019 | L2 | Rejected-Finance Other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
9 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Utarlai
GE (AF) Utarlai Post Box No. 11 Barmer (Raj) 344001
REPAIR TO CERTAIN BLDG OF SINGLE OFFRS ACCN, OFFRS INSTITUTE AND MES IB IN DOMESTIC AREA UNDER GE AF UTARLAI.
2022_MES_561734_1
8341/E8
Open Tender
Civil Works
Item Rate
180 days
Utarlai
AS PER NIT
8 documents required · 8 mandatory
₹500
GE (AF) Utarlai
₹40,000
Yes
24 Feb 2023
5 Nov 2022
16 Dec 2022
6 Nov 2022
9 Dec 2022
25 Nov 2022
Amount
Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.
M&L for rendering 15 mm thick in CM 1:6 on concrete surfaces/ brick / PCC block masonary surface, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in CM 1:4 on concrete surfaces/ brick / PCC block masonry surface,Finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling including finishing even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, over a coat of chalk whiting white or tinted, complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified and directed.
Hacking out old broken glass (any thickness, size quality of description) from metal frame including punching or drilling out old glazing pins./springs clips complete all as specified and directed.
S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.
S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane complete all as specified and directed.
ditto- all as per item No. 10 above but 5.00mm thick and area exc 0.5 Sqm each pane complete all as specified and directed.
Supply & Fixing 3 mm thick frosted glass ordinaary quality and glazing with oil putty in sqaure n.exc 0.5 sqm in each pane complete all as specified and directed
S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples and including with wooden beading supplied.
Supply & Fixing in repairs 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed
Supply & Fixing in repairs aluminium alloy anodised sliding door bolt 250 mm long with hasp, staple (clip type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium complete all as specified and as directed
Supply & Fixing in repairs hasp and staple of size 100 mm aluminium anodised wire type including bolt to hinges plate and fixed with screws complete all as specifed and directed
Supply & Fixing in repairs floor door stopper of brass body and tongues with hard drawn steel spring, overall length cover plate 150mm long complete all as specified and directed
S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm complete all as specified and directed.
Supply & Fixing in repair 18/19 mm thick prelaminated particle board interior grade, prelaminated both side face with decorative choice lamination one side and other side balancing white, fixed with screws or timber leaping on cutting exposded edges polishing complete as in built in shelves, cabinets , kitchen cupbords, modular kitchen drawer and almirah shutters or other placed complete as in built in shelves, cabinets partions etc . complete all as specified and directed.
S&F in repairs magnetic wardrobe ball catcher suitable for shutters fixed with nut,screw and washers of mild steel,bright finished complete all as specified and directed.
S&F in repair Butt hinges,75 mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised & fixed type C-21 complete all as specified and directed.
Supply & Fix in repairs aluminium anodised barrel tower bolt or extruded section length of bolt 150 mm long complete all as specified and directed
S&F in repairs 20-25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
S&F in repairs bath PVC cabinet mirror of size 350x450 mm complete all as specified and directed. Make- Prayag / commander / Polytuf/ shakti
S&F in repairs tubular towel rail, brass chromium plated, 20 mm dia ''D'' type, 60 cm long between flanges and fixed complete all as specified and directed.
S& F in repairs mild steel 150mm ordinary rat rail rod pattern springs heavy duty including roller and roller plate complete all as specified and directed.
Taking down chowkats or frames with shutters/ window (Without taking off shutters from the frame) n.exc 1.5 sqm each .
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed.
S&F factory made solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as directed.
S & F 100 mm Aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F Aluminum tower bolt of extruded section of size 150mm long complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm long size complete all as specified and directed.
Supply & Fix 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed
S & F 2nd class HW 35mm thick factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces complete all as specified and directed. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated.
S&F factory made 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars) edges of farming plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass,etc: size of members of shutters as specified in SSR Part -I Section, clause 8.24(a) complete all as specified and directed.
S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening complete all as specified and directed.
Repairing, resecuring, easing, adjusting shutters of any description exc 1 sqm but not exc 2 Sqm each without taking down including necessary repairing old iron mongry, if required compete all as specified and directed.
S&F factory made flush shutter 35 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F factory made 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.
S&F 25 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in kitchen cupbords, modular kitchen drawer and almirah shutters or other placed including dismantling old boarding complete all as specified and directed by Engr-in-charge.
Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (without takking off shutter from the frame).
Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each complete all as specified.Note : door shutter shall be taking down and re-fixing in separate item :
Taking down ventilator with frame complete nexc 1.0 sqm each complete all as specified and directed.
S & F factory made for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:4 and two coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.
S & F factory made for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 and two coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.
All as per Sl item 48 above but of size 75 X 60 mm as in cupboard frames.
S&F Aluminium hasps and staples sefety type with mild steel hinge pin including ball to hinge plate and fixed with screws 100 mm size complete all as specified and directed
S&F three track aluminum anodised sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings complete all as specified and directed.
S&F in repair fixed type anodised aluminium window with upper panel shall be fixed and provision of 02 Nos glass shutter openable at lower portion for window AC provision , shall be provided with 4 nos aluminum 75mm long hinge with 5mm thick tinted sheet glass 4 Nos tower bolt 100mm long all necessary fittings arrangement complete using aluminium frame section of window 63.5x38x1.5mm thick and shutter frame section 37x18x1.2mm etc complete all as specified.
S&F fixed type anodised aluminium ventilators with provision of bottom panel in fixed glazing of 3mm thick glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 65x40x1.5mm thick etc in frame and shutter frame aluminium section size 37x18x1.2mm complete all as specified.
S&F anodized aluminium brown/white colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers and key, glazing with 5mm thick tinted glass in upper panel and with 12mm thick pre laminated particle board in lower panel including rubber gasket, aluminum beading compete all as directed.
S&F anodized aluminium brown/white colour door with frame made of anodized aluminum frame size 101x44x2mm thick and anodized aluminum shutters having bottom rail of size 114x44x2mm ,top rail 83x44x2mm, middle rail 85x44x2mm with two numbers of disc/D type handle in each shutter, 200mm size aluminum tower bolts 02 Nos, brass lock 04 levers and key, glazing with 5mm thick tinted glass in upper panel and lower panel including rubber gasket, aluminum beading compete all as directed.
S&F in repairs aluminium door closer hydraulic regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Engr-in-charge.
S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S & F aluminium door strip thickness 20 gauge & width of strip 150mm with bush and rubber gasket suitable for wooden doors to cover gap between door and floor etc complete all as specified and directed by Engr-inCharge.
S&F in repair provision of neoprene /EPDM rubber gasket for aluminium doors/ window glass fixing complete all as specified
M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specifified and directed.
Taking up or down steel tubing 15mm bore and connections including cleaning for refixing the old tubing in new or old position complete all as specified and directed by Engr-in-charge.
All as per srl item No. 61 above but for 20 mm bore.
All as per srl item No. 61 above but for 25 mm bore.
Supply and laying 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old tubing complete all as specified and directed.
Supply and laying 20 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old tubing complete all as specified and directed.
Supply and laying 25 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old tubing complete all as specified and directed.
M&L cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n exc 10 cm complete all as specified and directed.
S&F in repairs 15mm bore cast copper alloy CP wall mixer/ WHB mixer/ sink mixer, chromium plated for mixing hot and cold water,with capstan head, screwed down for iron pipe and fixed for brass ferrule complete all as specified and directed. Make : Cera / Seiko / Parryware/ jaquar
S&F in repairs 15mm bore cast copper alloy wall mixer, chromium plated with 3 way telephonic shower arrangements/ L-bend for shower type , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Cera / Seiko / Parryware/ jaquar
S&F in repairs 15mm bore pillar tap fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete.Cera / Seiko / Parryware/jaquar
S&F in repairs, 15 mm bore stop valve/ angle valve fancy type cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs, 15 mm bore cast copper alloy stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and including re-fixing of old cistern, bend pipe if required complete all as specified.
S&F in repairs Vitreous china water closet (Sqating Pattern) "Orissa Pattern" size 580x440mm white with cast iron 'P' or 'S' trap front or back inlet and integral foots rest any pattern including connecting CI pipe of suitable bore and length and incl re-fixing of old Cistern, flush pipe etc if required & set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish etc out side of MOD land complete all as specified and directed.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length, complete all as specified.
S&F in repair kitchen sink with drainage board made of stainless steel 1.00mm thick for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm, including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified and directed.
S&F in repairs PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repairs waste fittings 32mm, brass, chromium plated suitable for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F in repairs 32 mm dia PVC flexible pipe fixed as waste pipe for WHB/ kitchen sink/ urinals inclding connecting to waste coupling with PVC couplers, elbow etc. complete all as spcified and directed.
S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene of low or high density in repairs complete all as specified and directed. (including dismantlling of half turn valve 32 mm of any description , if required)
S&F in repair grating dome 125 mm dia of stainless steel with or without hole complete all as specified.
S&F in repairs stainless steel chromium plated Jet spray with chromium plated finish including complete accessories complete all as specified and directed.
S&F in repairs brass chromium plated shower rose 80 mm dia with CP arms, with or without swivel joints, including fixing to 15 mm steel pipe or union complete all as specified and directed.
S&F in repairs 15 mm bore quarter turn two way angle cock/ bib cock capstan head, cast copper alloy, CP high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipes or for brass ferrule complete all as specified and directed.
S& F in repairs brass chromium plated health faucet of approved make and standared size with necessary chromium plated finish flexible pipe of min length 1.0 mtr inlcuding all other arrangements of 15mm bore and fixed complete all as specified and directed.
S&F in repairs plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Make: Hindware/Parryware
S&F in repairs brass CP towel ring of approved make all as specified and directed.
S&F in repairs straight 5.50mm thick sheet glass shelf 600 mm long and 120mm wide with chromium plated railing , mounted on decorative chromium plated bracket, assembly set complete all as specified and directed.
S&F in repairs straight 5.50mm thick sheet glass corner shelf 300mm x 300mm size in quarter circle shape or rounded at one side with Cromium plated railing , mounted on decorative chromium plated bracket assembly set complete all as specified and directed. Note : sample of glass shelf shall be provided/ decided by Engineer-In-Charge.
S&F in repair brass choromium plated soap dish complete all as specified and directed.
S&F in repair stainless steel choromium plated toilet paper holder complete all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) and rubish off the premises complete all as specified and directed.
Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc
M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match shade of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match shade of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for glazed ceramic tiles, coloured, 350mmx 250mm x7 mm/450 x 350 x 7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match shade of tiles laid over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.
M&L for glazed ceramic tiles, coloured, 300mmx 200mm x7 mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match shade of tiles laid over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces complete all as specified and directed.
Material & Labour for vitrified ceramic light shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed
Material & Labour for vitrified ceramic light shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles exc 0.42 Sqm but nexc 1.0 sqm each tile in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed
Demolition stone slabs and tiles of any description or thickness in floors,apron etc laid, bedded and pointed in any mortar
M&L for 20mm thick granite (of any type) work rubbed and polished in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite laid over and including 15 mm thick cement screed in CM 1:6 complete all as specified and directed.
M&L for rounding to the edges of granite stone slabs for kitchen platform and window cills etc complete all as specified and directed.
S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 15mm bore iron pipe and fixed. (Minimum weight 20mm - 2 1 0 gms ) Make : prayag/polytuf/Shakti
Supply and fix in repairs PVC water tank cover suitable for 500ltrs/1000ltrs capacity rotational moulded polyethylene water storage tanks.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/false ceiling /slabs/ blankets, any thickness, including cover fillets and framing complete
S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 X 605 mm all as specified. Note:- The aluminium sections & weight shall be as per clause 10.38.1 of SSR part -I (2009)
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
S&F Providing and fixing Gypsum Board 8-10 mm thick laminated with pvc decorative type sheet at one face and Pvc film on another face in ceiling fixed with screw as per manufacturers instructions complete all as specified
M&L for chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying CICO Clean-o rust rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with CICO ZINCILATE-500 or equivalent to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. Make: CICO clean-O-rust, CICO ZINCILATE-500 or equivalent in Fosroc/Dr Fixit/ACC/L&T/STP
Demolition of reinforced cement concrete in roof slab/chajjas / beams / cantilever/ balcony/ staircase etc and other suspended work of any description (reinforcement cut as required to facilited demolition)complete all as specifed and directed by engineer-In-Charge.
M&L RCC 1:2:4 nominal mix (20mm graded aggr) as in chajjas, downward facia, roof projection, parapet wall and the like complete all as specified and directed.
M&L RCC 1:2:4 nominal mix (20mm graded aggr) as Beams, cantilevers, bressummers, lintels band over 1.5m span in parapet wall and the like complete all as specified and directed.
Form work for flat fair finish to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.and similar items including edges.
Form work for flat fair finish to chullah hoods, chajjas, downward facia , parapet , roof projection troughs, facia and similar items including edges.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels etc complete all as specified and as directed by Engr-in-charge.
M&L for TMT bars 6mm to 8mm dia bar , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia as in stirupps complete all as specified and as directed by Engr-in-charge.
M&L for driiling holes with 10 mm to 20mm dia and 75 to 100mm deep as required and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with two component polyester resin anchoring grout (two pack system consist of 1 part of resin and 2 hardner part) hole with CICO RESIFIX-G @ 300gm per holes with all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. (Note : reinforcement shall be paid and mesurered separately) Make: CICO RESIFIX-G or equivalent in Fosroc/Dr Fixit/STP.
M & L for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of CICO-Latex SBR or equivalent in Fosroc/Dr Fixit/STP as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labors, supervision, tools, tackles, transportation, fixing etc., complete as per specification and as directed. MAKE: CICO LATEX SBR or equivalent in Fosroc/Dr Fixit/krishna conchem/STP.
M & L for perparation the surface and applying 10 to 40 mm thick in layers , each layer n.exc 20mm thick with polymer modifed mortar (PMM) on sufcace of slab/columns/beams/chajjas/parapet /roof projection/balcony/staircase with PMM-CICO Repocem PM or equivalent in Fosroc/Dr Fixit/STP including all necessary scaffolding, man and material complete all as specified and directed by Engineer-In-Charge.
Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even & smooth without using extra cement all as specified.
M&L PCC 1:3:6 type C-1 using 20mm graded stone aggregate in filling back of PS Chawkhat/frame and in bed blocks to hold fasts including making good to the disturbed portion complete all as specified and directed.
S & F in repair brass chromium plated single lever tall body with 150mm extension body fancy type pillar tap complete all as specified and directed Make:-Cat part No. OPP-15005BPM of Jaguar; Cat part No. F1018452 of Cera; Cat part No. F460014 of Hindware
S & F in repair brass chromium plated Overhead shower 190mm dia round shape single flow with ABS body complete all as specified and directed Make:-Cat part No. OHS-497N of Jaguar; Cat part No. F7010607AB of Cera; Cat part No. F160123 of Hindware
S & F in repair brass chromium plated hand shower dia 95mm round shape with ABS body complete all as specified and directed Make:-Cat part No. HSH-1737 of Jaguar; Cat part No. F7030112AB of Cera; Cat part No. F160003 of Hindware
S & F in repair brass chromium plated Exposed shower pipe with provision for simultaneous working of shower with operating divertor knob round shape dia 24mm , size 975 x 370mm with sliding holder for hand shower , 0.5m long flexible tube 8mm dia and 1.5m long tube complete all as specified and directed Make:-Cat part No. SHA-1217R*&SHA-549D8 of Jaguar; Cat part No. T9821A1 of Parryware; Cat part No. F160075 of Hindware
S & F in repair brass chromium plated single lever wall mixer with provision of flange in complete all as specified and directed. Make:-Cat part No. EKO-33673LWR of Jaguar;Cat part No. F1019403 of Cera;Cat part No. F570022 of Hindware
S & F in repair brass Vitrous china thin rim table top basin shape round size 415x415x145mm and waste coupling 32mm Female thread 130mm long complete all as specified and directed. Make:- Cat part No. OPS-WHT- 15905 & ALD-705 of Jaguar; Cat part No. S2020166 & F8050351 of Cera; Cat part No. C041M & T9953A1 of Parryware
S & F in repair brass chromium plated angular stop cock with wall flange complete all as specified and directed. Make:-Cat part No. OPP-15053 of Jaguar; Cat part No. F1012201 of Cera; Cat part No. F360006 of Hindware
Supply and fixed in repairs one piece viterous china floor/wall mounted superior quality , Ivory / white colour wash down water closet (Pedestal pattern), with CI "P" or "S" CI trap with inbuilt low level Eco twin button flushing cistern and seat cover etc. complete in all respect as specified and directed by Engineer-in-Charge. Make:-Cat part No. S1013179 of Cera; Cat part No. E3807PW of Johnson; Cat part No. ONS-WHT-10853S300UFSM of Jaguar
S & F in repair 15mm bore brass Chromium plated quarter turn central hole basin mixer with aerator inclduing flange , necessary fixing for 15mm bore size pipe complete all as specified and directed. Make:-Cat part No. SOL-6169B of Jaguar; Cat part No. F1003461 of Cera; Cat part No. G1915A1 of Paarryware
S&F in repairs for oval shape WHB (590 x 420 x 195) viterious China white incl fixing, waste coupling & PVC waste pipe of 32 mm dia all as directed.
S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured double layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with inlet / out let tank nipple , 20mm bore PVC PTMT float valve including dismantling the old water tank complete all as per specified and directed.
M&F for 1000 ltrs capacity Rotational moulded polyethylene in white coloured double layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position , inlet / out let tank nipple , 20mm bore PVC PTMT float valve including dismantling the old water tank complete all as per specified and directed.
Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing from site all as specified and directed.
M&L PCC for 20cm thick precast cement concrete Type C1 1:3:6, block masonry with solid block, set in CM 1:6 all as specified & as directed.
M & L for 75 mm thick PCC 1:3:6 type C-2 (40 mm graded stoneaggregate) finishing the surface with even and fair without using extra cement all as directed.
M&L for 75mm thick PCC (1:2:4) type B-1, as in floors finished even and smooth without using extra cement all as directed. .
M&L for 25mm thick PCC (1:2:4) type B-0, as in floors finished even and fair without using extra cement all as directed. .
M&L for rubber moulded coloured chequered cement concrete tiles, 25cmx25cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, laid over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiles complete all as specified.
M&L for heavy duty Endura vitrified parking tiles with mat finish or as required , 30cmx30cmx10mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, laid over and including 15mm thick screed bed in CM 1:6 including dismantling of old tiles complete all as specified.
Demolition of precast RCC articles built in cement mortar including all quoins, arches, pillars,covers, jafri jali etc. and removing from site all as specified and directed.
M&L for providing precast cement concrete louvres and jallies (Type B1 1:2:4 (12.5 mm graded aggregate), 35 mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4.
Cutting openings through walls in cement mortar for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, and removing surplus to store and rubbish off the premises
M&L for forming jambs, etc. in CM 1:4, to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete
S&F in repair cast iron floor trap, 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B -1, 1:2:4 complete all as specified.
All as per item No. 152 above but 100mm dia of outlet for WC's without grating complete all as specified and directed.
S&F in repair cast iron nahani trap, 75 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4).
S&F in repairs branch pieces single 'T' 100 mm bore equal or unequal with oval access door
S&F in repair 75 mm bore cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured).
S&F in repair 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured).
S&F in repairs 100 mm CI connection socket/ bend to fit out let of WC
S&F sand cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ers, with cement joints, laid in trenches or in floors or fixed to wall including dismantling of old CI drain pipe complete allas specified & directed.
All as per Ser item No 153 here-in-before but 100 mm bore and laid in trenches or in floors or fixed to wall including dismantling of old CI drain pipe complete allas specified & directed.
Rasam Engg Co.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .