Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹3.0 L
Closing Date
22 Oct 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
DIVISION
13 conditions · 2 needing a document upload
Financial Eligibility Criteria:--- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria:--- (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. (Please refer Tender booklet for further clarification) Similar Nature of work - Any type of civil work viz. building and structures work, pipe lines, underground and overhead tanks, foundation treatment works in any Railway embankment/cutting, any earth work, cover over platform, bore wells, level crossing works including lifting barriers, cement concrete apron works etc.
4 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per tender document attached.
Tenderers may please note - During lockdown period (declared due to COVID - 2019 pandemic) - A) Necessary authority to travel to site of work on a specific request indicating date shall be issued by Railway Administration to facilitate site visit. B) TC meetings and Negotiation can be conducted through online Video/Audio chat on conference call. Record of same should be kept.
Repairs to doors, windows, flooring, roof shed, pathway, fencing, of railway colony, colony drains,dustbin etc of staff quarters at Malkapur, Bodwad, varangaon under SSE Wks Malkapur jurisdiction. ZBB 2026-27
DRMWBSL332026t4~CR
DRMWBSL332026t4
Open
Works - General
9 Months
Jalgaon, Maharashtra
₹0
₹3.0 L
29 Sept 2026
29 Sept 2026
8 Oct 2026
50 items across 1 schedule · ₹1,39,31,092.95 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | 2km | cum | 15 | 196.66 | 2,949.9 |
| 2 | All kinds of soil | cum | 200 | 177.5 | 35,500 |
| 3 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 110 | 7,878.5 | 8,66,635 |
| 4 | Foundations, footings, bases for columns | Sqm | 70 | 392.15 | 27,450.5 |
| 5 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 45 | 9,045.75 | 4,07,058.75 |
| 6 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 55 | 10,852.95 | 5,96,912.25 |
| 7 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. | Sqm | 350 | 842.5 | 2,94,875 |
| 8 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 1100 | 107.85 | 1,18,635 |
| 9 | Door frame 125 mmx 60 mm | Metre | 150 | 814.85 | 1,22,227.5 |
| 10 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 100 | 7,132.25 | 7,13,225 |
| 11 | With F.P.S.(non modular) bricks | cum | 35 | 9,299.9 | 3,25,496.5 |
| 12 | Area of slab upto 0.50 sqm | Sqm | 80 | 5,413.5 | 4,33,080 |
| 13 | Area of slab over 0.50 sqm | Sqm | 180 | 5,136.3 | 9,24,534 |
| 14 | Second class teak wood | cum | 1.5 | 1,42,949.7 | 2,14,424.55 |
| 15 | 30 mm thick shutters | Sqm | 130 | 3,747.3 | 4,87,149 |
| 16 | Second class teak wood | Sqm | 100 | 3,323.2 | 3,32,320 |
| 17 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 70 | 3,167.95 | 2,21,756.5 |
| 18 | 100x58x1.90 mm | Each | 285 | 45 | 12,825 |
| 19 | 300x16 mm | Each | 190 | 216.55 | 41,144.5 |
| 20 | 250x10 mm | Each | 95 | 83.9 | 7,970.5 |
| 21 | 125 mm | Each | 190 | 39.95 | 7,590.5 |
| 22 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. | Sqm | 60 | 4,488.95 | 2,69,337 |
| 23 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 700 | 117.35 | 82,145 |
| 24 | Hot finished welded type tubes | Kg | 8200 | 194.4 | 15,94,080 |
| 25 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 9800 | 172.6 | 16,91,480 |
| 26 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. | Sqm | 100 | 1,315.3 | 1,31,530 |
| 27 | Size of Tile 600x600 mm | Sqm | 100 | 1,553.45 | 1,55,345 |
| 28 | 0.63 mm thick with zinc coating not less than 275 gm/ m2 | Sqm | 400 | 1,087.65 | 4,35,060 |
| 29 | 1:4 (1 cement: 4 fine sand) | Sqm | 900 | 347.05 | 3,12,345 |
| 30 | Neat cement punning. | Sqm | 550 | 79.95 | 43,972.5 |
| 31 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 350 | 262.7 | 91,945 |
| 32 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre | Sqm | 1500 | 185.65 | 2,78,475 |
| 33 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 1050 | 176.25 | 1,85,062.5 |
| 34 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 1050 | 170.7 | 1,79,235 |
| 35 | Two or more coats on new work | Sqm | 100 | 146.8 | 14,680 |
| 36 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface | Sqm | 1565 | 120.75 | 1,88,973.75 |
| 37 | Dismantling W. C . Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. | Each | 29 | 134.1 | 3,888.9 |
| 38 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) | cum | 70 | 1,503.6 | 1,05,252 |
| 39 | In cement mortar | cum | 20 | 2,060.2 | 41,204 |
| 40 | In cement mortar | cum | 210 | 2,458.95 | 5,16,379.5 |
| 41 | Of area 3 sq. metres and below | Each | 140 | 367.2 | 51,408 |
| 42 | For thickness of tiles 10 mm to 25 mm | Sqm | 210 | 73.4 | 15,414 |
| 43 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 339 | 54.65 | 18,526.35 |
| 44 | 510x1040 mm bowl depth 178 mm | Each | 20 | 6,917.2 | 1,38,344 |
| 45 | Orissa pattern W.C. pan of size 580x440 mm | Each | 35 | 3,169.05 | 1,10,916.75 |
| 46 | Orissa pattern W.C. pan 580x440 mm | Each | 35 | 426.8 | 14,938 |
| 47 | 40 mm dia | Each | 20 | 119.55 | 2,391 |
| 48 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 630 | 530.9 | 3,34,467 |
| 49 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 595 | 634.45 | 3,77,497.75 |
| 50 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 300 | 1,176.8 | 3,53,040 |
| Schedule total | ₹1,39,31,092.95 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022-uptoACS10.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
GCCACS12.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AnnexureVIAFormatofEMDandPBG.pdf Annexure VIA Format of EMD and PBG
ATTACHMENT
PCEcircular.pdf
ATTACHMENT
BeneficiaryName.pdf
ATTACHMENT
labourlawspenaltyclauses.pdf
ATTACHMENT
trainedsupervisorsplcon.pdf
ATTACHMENT
drmwbsl332026t4.pdf
ATTACHMENT
AnnexureVIAFormatofEMDandPBG.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .