Repair AND renovation of Ward Office Brane AND sub divisional office Brane including reconstruction of boundary walling

Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 120 cm girth upto and including 240 cm girth.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge All kinds of soil

Providing and laying Stone Soling including Compacting, Watering including all carriages of material complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

PP-R PIPES AND FITTINGS Providing and fixing 3-layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 32 mm OD(SDR-7.4)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for: (A)Foundations, footings, bases for columns

(B) To be Included

ELECTRICAL part : Wring for light point/ exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cabe in existing surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthling the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Pointing on brick work or brick flooring with cement mortar 1 : 4 (1 cement : 4 fine sand) Flush/Ruled/Struck or weathered Pointing

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and Fixing of imported Wooden Paneling 12mm thick in walls including 2'x2' Budloo wood framework melamine spirit Polish and all necessary accessories complete job as directed at site.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) extra for brick incl.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. First class kail wood 30 mm thick.

HDMR Pannels for Doors 20 mm thick including fitting etc all complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/ 10sqm of approved brand and manufacture

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead: Of area beyond 3 sqm.

Taking out Doors, Windows, Clereshry Windows shutter including of area of 3m2 or below

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and fixing specified pre-laminated medium density board with one side decorative and other side balancing lamination Grade I (exterior grade) in shelves with screws and fittings wherever required. MDF board conforming to IS: 14587 edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand. 18mm

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. One coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and laying of PVC pipes of prince make grade B incld excavation and refilling complete job as directed at site including carriages up to site of work Camp. A. 100mm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood

Providing and Fixing of Soap Case and Towel Rode

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Construction of Brick Masonary Manhole in Cement Mortar 1:4 with R.C.C top Slab with 1:5:3 mix foundation Concrete 1:4:8, inside placing 12mm switch C Cement Mortar 1:3 with neatcoat and making channels in concrete cement 1:2:4 with C.T Cover with frame with common trunk by FPS

Provinding and Fixing of Health Facet

P/Fabrication of Wardrobes (Ornamental) approved qualitiy 19mm board inside, shelves of wherever required including 6mm Ply Board on back and 19mm Ply Board in shutters, inside and outside of shutters finished with Dulmica sheeting of approved quality and Colour on exposed face of approved design Complete Job (50-60 cm Deep)

EXTERIOR FINISHING Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

C. Aldrop Godgej

F. Aldrop

Wall lining butch work upto 10 m height with Dholpur stone 40mm thick rough facing on the exposed surface with stone strips of minimum length 300mm and required width including embedding every tenth layer and bottom most layer in masonry or concrete after making necessary chases of size 75 x 75mm and by providing layer of 75 thick strips including 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) including ruled pointing in cement mortar 1: 2 (1 white cement : 2 stone dust) with an admixture of pigment to match the shade of the stone and curing complete as per the directions of engineer-in-charge

Providing laying and Fixing 25MM thick Rubber Moulded interlock tiles of required shade size and colour in 1:4 mix complete (wherever required) including all leads lifts and carriage to all material complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Providing and Installation of Water Purifier of approved Make (Kent, Livpure, Havells, Hindware. A.O Smith) including all accessories

Removal of Mulba/Unhygienic Material/Mud from the site including its disposal beyond Municipal Limits by Mechanical Transport including all carriages, leads and Lifts complete job as directed at site.

Providing and Installation of Mixer (Parryware, Hindware)

Providing and Fixing of Angle Valves.

Supply of AC 230/250volts 50 Hz exhaust fan with louvers of following sizes including connection etc complete as required 300 mm

Supplying and fixing of following sizes of medium class PVC channel along with accessories in surface including complete in all respects. 1 inch

Wiring for power / Heating point with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in existing surface/recessed medium class PVC Conduit along with 1 No. 4 Sq.mm FRLS PVC Insulated copper conductor single core cable for loop earthling as required.

Wiring for circuit/sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in Existing surface/Recessed medium class PCV conduit as required. 2x2.5 mm² +1x2.5mm² earth wire.

2x4 mm²+ 1x4mm² earth wire.

2x10 mm²+ 1x6mm² earth wire.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required

Supplying and fixing suitable size G.I box with modular plae and cover in front on surface or in recess, including providng and fixing 6 pin 15/16 amp modular socket outlet and 15/16 amps modular swith, connection, painting etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution broad, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthling etc. as required. But without MCB/RCCB/Isolator. 4 way (4+12) Double door

Supplying and fixing following rating, four pole, 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc as required 63 Amps

Changeover 63Amp ,415Volts , 4P

Supplying and fixing 5 amp, to 32 amps, rating 240 volts B/ C / D Series, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and Commissioning etc as required Single Pole.

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Mot

or, class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessoriesincluding safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req 1. 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum)

supply installation testing & commissioning of water heaters ( Geysers) 50 litre capacity vertical type along with 3pin top and lead ,foundation bolts & pvc connections 5 star rated ISI marked conforming to BIS 302-2-21 , 8978 (venus/Racold/Equivalent make)

35 mm² Cable (2C) from LT Line to meter,1.1k V Grade, Armoured, XLPE Insulated Stranded Conductor FRLS type for main service line Havells/polycab/equivalent make including termination with brass compression gland / aluminium lugs.