REPAIR MAINT OF STREET LIGHTS HIGH MAST LIGHTS AND CONNECTED WORKS AT TECHNICAL AND PERIMETER AREA AND REPAIR REPLACEMENT INTERNAL WIRING INCL BUILDING LIGHTS PAINTING OF POLES PANEL AND EARTHING AND CONNECTED WORKS AT SAG PAKUR AT AF STN SINGARSI

Amount

Taking down defective security, high mast light with luminair mounting arm, pulley assembly, aviation obstruction light, lightening arrestor, spike control gear box, electrical motor carefully and refixing the same at existing location after necessary repair,complete all as specified and as directed. Note : For new spare parts/lights, fittings shall be measured and paid seperately and paid seperately under respective items as supply only however screws, insulation sleeves, nuts bolts, washers and PVC insulated PVC sheathed, multistranded aluminium or copper conductor cable will be included in this rate)

Supply and fixing LED flood light 200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,complete all as specified and as directed.

Supply and fixing LED flood light 400 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,complete all as specified and as directed.

Supply and fixing LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket and clamps with nuts bolts of suitable size and with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection,complete all as specified and as directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket and clamps with nuts bolts of suitable size and with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and as directed.

Supply only Aviation obstruction light luminaries fittings have integral light luminaries fitting having integral LED aviation light comprising of aluminium housing with polycarbonate enclosure at the top of the pole and making necessary electirc connection and fixing arrangement, complete all as specified and as directed. Make Bajaj / Philips / Havells / Crompton

M&L for repairing / servicing of control gear box electrically operated raising and lowering gear, double drum winch, steel wire ropes, 6 mm lantern carriage, top pulley arrangement including greasing oiling and lathe works,complete all as specified and as directed.

M&L for re-winding of burnt electric motor 1 HP 3 phase induction motor, after taking out burnt winding wire of field coil and re-winding of filed coil with suitable size of super enamled copper winding wire including necessary insulation reassembling and refixing in position etc, complete all as specified and as diected.

S&F in repair insulated PVC insulated copper conductor 4 sqmm 5 core through steel conduit pipe of medium grade fixed to pole with fixing arrangement, working voltage 1100 volts grade, 50 Hz conforming to IS-694 from junction box to light fitting, connections complete all as specified and directed. . Make: HAVELLS/POLYCAB/FINOLEX

Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and fittings complete and making good the disturbed surfaces,complete all as directed by Engineer-in-Charge.

M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC casing capping 25/20 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC/wooden switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall, complete all as specified and as directed.

All as per Item No 12 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed.

All as per item No 12 here-in-before but for one 5 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per Item No 2 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 4 Sqmm copper cable FRLS & 2.5 Sqmm FRLS copper cable for earth continuity wire, complete all as specified and as directed.

S&F switch piano flush type 6 Amp single pole one way, complete all as specified and as directed.

S&F socket flush type 6 Amp 5 Pin, complete all as specified and as directed.

S&F switch socket combination 5 Pin 6 Amp universal, complete all as specified and as directed.

S&F switch socket combination 5 Pin, 6/15 Amp universal complete all as specified and as directed.

S&F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body, complete all as specified and as directed.

S&F call bell, ding dong AC 230 volts, single pole, complete all as specified and as directed.

S&F bell push, flush type, 5 amp, complete all as specified and ad directed.

S&F in repair LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed . (Make :Crompton , Bajaj/Philips/Havells)

S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed by Engr-in-charge. (Make :Crompton , Bajaj/Philips/Havells)

S&F in repair LED light fitting 1 X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and as directed by Engr-in-charge. (Make :Crompton , Bajaj/Philips/Havells)

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed by Engr-in-charge. (Make :Crompton , Bajaj/Philips/Havells)

S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 8 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed. (Make:Havells ,Hager,Schineder or Legrands).

M&L for MCB, SP, 240V,40 Amps and ' B ' series breaking capacity 10 KA ISI marked, complete all as specified and as directed.

M&L for MCB, SP, 240V, 6 to 32 Amps and ' C ' series breaking capacity 10 KA ISI marked, complete all as specified and as directed.

M&L for MCB, SPN, 240 V, 40 A Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked,complete all as specified and as directed.

Supply and fix ceiling fan regulator electronic Step type, solid state, 120W, 2 module, 240 volts, complete all as specified and as directed.

S&F sub main wiring with 2 run of 2.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable FRLS working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including heavy duty rigid non-metallic PVC casing/caping (25mm dia) including size 2.5 sqmm (nominal cross sectional area) PVC insulated un-sheathed single core multi stranded copper conductor cable as earth continuity conductor connected to main switches/DB"S or common earth dully complete all as specified and directed after taking down old sub main wiring complete and making good the disturbed surface complete all as specified and as directed. ( NOTE :- Two runs of 2.5 Sqmm pvc wire, one run of 2.5 Sqmm pvc wire and one run of pvc casing caping/ PVC conduit will be measured as one unit

Supply and fixing sub main wiring with two run of single core 4 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 4.0 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping after taking out old un serviceablewring complete and including PVC casing caping all as specified and as directed. Note : (i) Two run of single core cable 4 sq mm and one run earth wire 2.5 sq mm will be measured as one length.(Make: RR,KEI and Finolex for copper Cable and Prestoplast/Plaza for casing/conduit)

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant with driver and lamp complete including required junction boxes for inlet / outlet of cables,complete all as specified and as directed.

M&L for Compression/crimping type sleeve joints for jointing conductors/ jumper connections including treatment with conducting jelly clearance of ACSR conductor and tree prunning over LT OH lines,complete all as specified and as directed.

M&L Dismantling of ACSR conductors,complete all as specified and as directed.

M&L for Dismantling cross-arms of M.S. channel or angle sections etc. complete and will be given as schedule of credit,complete all as specified and as directed.

S&F thermoplastic, polystyrene unbreakable junction box size 388 x 304 x 160 mm suitable for pole mounted outdoor type IP 65 insulated complete with FI clamp & nut, bolts, washers and including resin type terminal block heavy duty suitable for ring lugs with phase seperators between R, Y, B, N terminals and one MCB SP 6 amp 10 KA, all duly mounted on din cannel, cable glands for cable entry incl GI double clamp made out of 25x4 mm GI strip,complete all as specified and as directed. MAKE: SINTEX/POLYCAB/HENSEL

Supply and fixing in repair on load (euroload) change over switch with enclosure, 4 pole, 125A, one in two out Conforms to IS/IEC:60947-3 complete with door interlock and change over switch all as specified and as directed.Havells (Cat Part No: IHCNFE0125) or equivalent make of L&T/ABB.

S&F inreplacement of PVC insulated and sheathed flexible wire of 3 core with copper conductor 2.5 sqmm,complete all as specified and as directed.

Supply and fixing in repair LED bollard light 10 watt IP65 rated with robust design and efficient light distribution complete.Model: Syrus(Surya), Cat Part No: LBLSR-10-WW/Bajaj/Havella/Crompton Note: (Excavation, ret filling and PCC foundation, connection and testing should be included in the rates quoted),complete all as specified and as directed.

M&L for painting to surfaces of existing Steel tubular pole 9.0/11.0 mtr long with attached accessories (cross arms, clamps, GI protection pipe etc) with two coat of aluminium paint after preparation of surfaces including painting to poles with two coats black & white paints in straps 5 x 30cm alternatively all round the poles from the bottom,complete all as specified and as directed.

M&L in repair for clamps, brackets incl nuts and bolts for fixing of street light fittings on pole all complete including required GI protection pipe etcwith two coat of aluminium paint after preparation of surfaces,complete all as specified and as directed.

M&L in repair for trolley for mounting of transformers by providing 8 Nos of hooks for fastening of transformer and making arrangment in existing trolley for loading and unloading and provision of ralling all around the trolley includng mounting of transformer on trolley,complete all as specified and as directed.

M&L in replacement for Earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick burried in a pit to a depth of 2.25mtrs below ground level with top edge of earth plate at a depth of not less than 1.50 meters below ground level, earth plate packed on all sides with charcoal dust mixed with salt to a thickness of 15cm, connected with earthing lead of 32mm x 6mm galvanised iron strip, watering pipe 20mm dia light grade and water filling funnel and mess complete all as shown in plate No 4 of MES Schedule part II to the earthing test point, including PCC Work complete including protection pipe 40 mm dia light grade,complete all as specified and directed by Engr-in-Charge. (Note :- The earth strip/lead up to 7.5 m shall be deemed to be included quoted unit rate.)

M&L in repair for earth continuity conductor or main earthing lead fixed to drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm galvanised iron strip,complete all as specified and as directed.

M & L in repair for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw incl MS enclosure,complete all as specified and as directed.

Supply,lay,connect and commission LT underground cable XLPE of size 16 sqmm 4 core insulated screened PVC bedded galvanised steel strip armoured heavy duty with multi stranded aluminium conductor 1100 volts grade (ISI) marked laid in trenches, ducts, pipes or fixed on pole etc,complete all as specified and as directed.

Ditto all as per item no.48, but sec. area 50 sq. mm

Ditto all as per item no.48 but sec. area 150 sq. mm

Ditto all as per item no.48 but sec. area 400 sq. mm

Excavtion in trenches n.exc 1.5 meter wide and n. exc 1.5 meter in depth for foundation etc or for laying of cable etc and getting out in soft/loose soil,complete all as specified and as directed.

Supply and laying new dry river sand laid in trenches 8 cm below the cable and 15cm above the cable and punned to 18 cm as cable cushioning and covering,complete all as specified and as directed.

Supply and laying in replacement of brick well burnt locally available sub class 'B' laid over sand cushioning for cable protection in trenches width of brick perpendicullar to the length of cable including taking up of old UNSV bricks, complete all as specified and directed by Engr-in-Charge.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25 cm depth,complete all as specified and as directed.

Removing of excavated material (soil) to a distance n.exc 50 meter and depositing where directed at a level n.exc 1.5 meter above the starting pointcomplete all as specified and as directed.

M&L for GI pipe "medium grade " ISI marked with a laid in trenches for road crossing, making good the disturbed surface as earlier of 80 mm dia size,complete all as specified and as directed.

S&F Cable jointing kit for 1.1 KV for indoor / outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size upto 400 sqmm,complete all as specified and as directed.

S&F Cable jointing kit for 1.1 KV for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size upto 150 sqmm,complete all as specified and as directed.

M&L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint,complete all as specified and as directed.

M/S Subhadip Enterprise (BID ID -3342637)

M/S SINGH ENTERPRISE (BID ID -3338392)

M/S AMARNATH AGARWALLA (BID ID -3351030)

M/S MBS TRADING CO (BID ID -3334771)

DANATION CONSTRUCTIONS (BID ID -3335706)