REPAIRS MAINTENANCE OF JOINERY AND FLOORING IN TYPE A AND B QUARTERS IN RESIDENTIAL AREA UNDER GE I RND RCI HYDERABAD

Amount

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each complete all as directed.

Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.

M&L, making good under cills or over arches, lintels and bressummers including all pinning when necessary in cement mortar 1:4 finished to match with the existing work complete all as directed.

S&F 1.25mm thick Pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 1.25mm thick Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L, PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregate) for back filling in hollow portion of pressed steel frames, complete all as specified and directed.

S&F, second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F, 35mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc., complete all as specified and directed. Note: Sizes of members of shutters as specified in SSR Part I

S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.

S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F, 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 100mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F in repairs, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples complete all as specified and as directed.

S&F, powder coated aluminium frame for doors, windows, ventilators or partitions with one or more rebates including joining cleat for fixing etc., fabricated complete to receive sheet glass and prelaminated board complete all as specified and as directed.

S&F, powder coated aluminium door/sliding window shutters with aluminium section weighing not less than 0.55Kg/m including necessary joining cleats, glazing clips, anodized aluminum snap beading, screws, handles and suitable locking arrangement for window shutters etc., complete all as specified and as directed.

S&F, powder coated aluminium ventilator, partly louvered and partly fixed type, without sash bars, including necessary joining cleats, glazing clips, anodised aluminium snap beading, screws, louvers etc., complete all as specified.

Note for item No 21 to 23:Minimum thickness of powder coating shall be 50microns

S&F in repairs, mild steel framed work such as grills, gratings etc., framed guard bars and similar works conforming to Fe 290 Gde-E-165 including two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

S&F, standard EPDM rubber gasket for fixing of glass in partitions or doors or windows or ventilators complete all as specified and directed.

S&F, 5mm thick sheet glass, tinted, ordinary quality exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F, 4mm thick figured glass, pin head type, not exceeding 0.5sqm in each pane complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls from any height including racking out joints, hacking for key, scrubbing down with water etc., including removal of rubbish material off the premises complete all as directed.

M&L, 15mm thick rendering in cement mortar 1:4, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L, preparing newly plastered surfaces of walls and ceilings applying two coats of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality, over a coat of primer all as per manufacturer's instruction complete all as specified and as directed.

M&L, preparing newly plastered surfaces of walls and ceilings applying two coats of oil bound distemper, white or tinted over coat of alkali resistant primer as per manufacturers instructions complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed.

M&L, 7 to 8mm thick 400 x 400mm coloured, joint free Non skid ceramic tiles, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:4 laying in floors complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

M&L, 7 to 8mm thick 300 x 300mm coloured, joint free Non skid ceramic tiles, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:4 laying in floors complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

M&L, 7 to 8mm thick light coloured ceramic tiles in skirting of size 400 x 100mm, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

M&L, coloured glazed ceramic tiles of size 450 x 300mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

c devender reddy and co

sanjar enterprises

SHAH ENTERPRISES