8431 REPAIR REWINDING OF CEILING FAN EXHAUST FANS AND CERTAIN ALLIED EM WORKS SUCH AS DBS EARTHING ETC IN ND MB UNDER GE NW KUNJALI

Amount

Taking down of ceiling fan, any sweep/size at any height and Refixing complete all as specified and as directed.

M &L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed.

S & F IN REPAIR in replacement of plastic body capacitor of 2.5 mfd capacity with wire , suitable for single phase motor and making connection complete all as directed. Make : Surya/Usha/TIBCON/Havells/Epcos.

M & L for Repairing of ceiling fan of any make, 1200 mm sweep dismantling its parts cleaning properly, rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petty items such as split pins, assembling and testing after fixing of fan blades, refixing at site and connecting complete all as specified and as directed.

Supply and fix in repair Ball bearing suitable for 1200mm sweep ceiling fan of SKF or NBC or equivalent.

Repairing of ceiling fan of any make, 1400 mm sweep dismantling its parts cleaning properly, rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petty items such as split pins, assembling and testing after fixing of fan blades, refixing at site and connecting complete all as specified and as directed.

Supply and fix in repair Ball bearing suitable for 1400mm sweep ceiling fan of SKF or NBC or equivalent.

Taking down Exhaust fan at any height,any size, sealing cable end, dismantling complete all as specified and as directed.

M &L Painting of Exhaust fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc.

M & L for Repairing of Exhaust fans 200/225/300 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, rewinding and rewinding and varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

M & L for Repairing of Exhaust fans 380 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, rewinding and varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

M & L for Repairing of Exhaust fans 450 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, rewinding and varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

M & L for Repairing of Flame Proof Exhaust fans 300 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, rewinding and varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

M & L for Repairing of Flame Proof Exhaust fans 450 mm sweep and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, rewinding and varnishing of winding, cleaning dust, rust & assembling and refixing at site complete all as specified.

Supply and fix in repair Ball bearing suitable for 300 mm sweep Exhaust fan of SKF or NBC or equivalent.

Supply and fix in repair Ball bearing suitable for 380 mm sweep Exhaust fan of SKF or NBC or equivalent.

Supply and fix in repair Ball bearing suitable for 450 mm sweep Exhaust fan of SKF or NBC or equivalent.

Taking down Air circulaor & wall fan any sweep any size at any height and Refixing complete all as specified and as directed.

M & L for Repairing of Air Circulator fans 450 mm size and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, rewinding and varnishing of winding, cleaning dust, rust & applying one coat grey enamel paint, assembling and refixing at site complete all as specified.

Repairing of Air Circulator fans 600 mm size and make, dismantling parts properly cleaning/removing old existing grease oil and removing old paint from blades. Applying new oil grease, rewinding and varnishing of winding, cleaning dust, rust & applying one coat grey enamel paint, assembling and refixing at site complete all as specified.

Repairing of wall fan of 400 mm sweep dismantling its parts cleaning properly rewinding with super copper enamelled wire suitable gauge, varnishing, oiling and greasing replacing petti items such as split pins, cleaning of fan body and its blade by cleaning agent assembling and testing after fixing of fan blades, refixing at site and connecting complete all as specified and as directed.

M &L Painting of Air Circulator complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed.

Supply & Fix in repair metal & plastic louvers suitable for 200/225/300 mm Exhaust fan at any heightcomplete all as specified and as directed.

Supply & Fix in repair metal louvers suitable for 380 mm Exhaust fan at any heightcomplete all as specified and as directed.

Supply & Fix in repair metal louvers suitable for 450 mm Exhaust fan at any heightcomplete all as specified and as directed.

Supply & Fix and Replacement of 15 mm dia clamp assembly with nut bolts & rubber bush suitable for downrods and split pins as approved by Engr -in -charge.

Supply & Fix and Replacement of 15 mm dia canopy suitable with fixing nut bolt as approved by Engr -in -charge.

Supply & fixing in repair ceiling fan down rod of length 300 mm inner diameter 15 mm and thicness not less than 1.5 mm with clamps nuts,bolts and washers for existing ceiling fan as approved by Engr-in-charge.

Supply & fixing in repair ceiling fan blade suitable to any size and make complete all as specified and directed .

S&F in repair Flame Proof Junction Box with Plain cover 3/4" ET Dia 80 CAT NO- JB/OA/104 of Sudhir or it's equivalent from Baliga/Shyaam

S&F in repair Flame Proof Switch socket & plug combined in LM6 cabe termination box in LM6 16 Amps 250 V multi 3 pin 5 and 3 pin 16 A rotary type with termination box in LM6 single pole 250 V, complete all as specified and as directed.

S&F in repair Flame Proof Switch socket - weather proof MCB socket & plug combined 32 A, 250 V(2P+Earth) and 9 KA complete all as specified and as directed.

S&F in repair Flame Proof Switch rotary type with termination box in LM6 single pole 250 V, complete all as specified and as directed.

Supply & fix IN REPAIR wall fans 230 volts single phase oscillating 400 mm sweep, 1360 RPM, 50 watt, 72 Air del cum /min suitable for wall mounting complete all as specified and as directed. Make: PLATINA Model of Havells or equivalent Model in Bajaj and Khetan

Supply & fix IN REPAIR wall Air Circulator fans 230 volts single phase oscillating 600 mm sweep, 50 C/S, 180 watt, 280 Air del cum /min suitable for wall mounting complete all as specified and as directed. Make: TURBOFORCE Model of Havells or equivalent Model in Bajaj and Khaitan

S & F IN REPAIR exhaust fan of sweep 380 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Bajaj/CG/ khaitan

S & F IN REPAIR exhaust fan of sweep 300 mm heavy duty type complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by using 4 Nos 200 mm long 12 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 completed all as specified and directed. Make: Havells/CG/ Bajaj

S & F IN REPAIR exhaust fan of sweep 200/225 mm mounted on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and completed all as specified and directed. Make: Bajaj/CG/ Havells

S & F IN REPAIR Ceiling fan 5 Star Rated 1200/1400 mm sweep heavy duty type complete with and suitable for operation on 230 Volts single phase 50 Hz AC supply and connectin up with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm including fixing and making connection and fixed by completed all as specified and directed. Make: Bajaj/CG/ Havells

S & F IN REPAIR Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 12 or equivalent Cat part in Siemens/C&S

S & F IN REPAIR Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 11 or equivalent Cat part in Siemens/GE

S & F IN REPAIR Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5076 10 or equivalent Cat part in Siemens/GE

S & F IN REPAIR Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting DP enclosure, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make - Legrand cat No 5077 91 or equivalent Cat part in Siemens/GE

S & F IN REPAIR Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting TPN 4 way, 440 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s etc complete all as directed. Make - Legrand cat No 5077 55 or equivalent in Siemens/GE NOTE FOR ITEM No. 41 to 45 : MCB DBs shall be concealed in wall where ever posible including cost of removing old wooden box making good the surface to match with surrounding deemed to be included in quoted rates

S &F in repair LED Street light 48 Watt Energy Saving and Environment friendly light fitting with 24 nos LED Light source lumens with electronic gear housed in Pressure diecast alluminium alloy LM6 with IP65 protection operating volt up to 265 volts including suitable size of pipe bracket clamp for fixing complete all as specified and dierected . Make -Havells cat part No- ENDURACITYLINERNEXGENSL48WLED757SAYSBOPC or equivalent cat part in Crompton / Bajaj / Philips

M&L in repair or sub-main wiring with 2 runs of 4.0 sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 4.0 sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including taking up/down old unservucable sub main wiring and making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

M&L in repair for sub-main wiring with 2 runs of 6.0sqmm copper conductor cable (FRLS grade), 1100 volts grade PVC insulated and unsheathed multi-stranded, drawn in and including heavy grade PVC conduit not less than 25mm dia (internal width) with all accessories like tees, elbows, junction boxs, reducer etc as required, including one run of 6.0sqmm dia PVC insulated unsheathed copper conductor cable as earth dolly/mains, with all accessories like PVC elbow, PVC tee, etc including making good the distrubed surfaces/location complete all as specified and directed. Note: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Gloster / Plaza

S &F in repair 90Watt, LED Bldg security light, PDC aluminium housing top maintainable with sealed toughened glass cover, SMD LED with secondary lens including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- C & S cat part No. LTESST90WLED/LS, (Indus series), bajaj,cat part no- BRTFG 90W LED I V2 or equivalent cat part in Crompton / Wipro / Philips

M&L in repair point wiring complete with 1.5 Sq.mm single core multistranded PVC insulated & unsheathed copper conductors cable 1100 volts FRLS grade ISI make and drawn through & including PVC non metallic casing and capping with Accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI make terminal boxes fixed on wall including one PVC insulated & unsheathed multistranded copper conductor 1.5 Sq. mm as earth continuity conductor connected to common earth dolly including modular cover plate and modular metal box all as specified .

One light point controlled by one 5A switch

One Fan point controlled by one 5A switch

One Bell point controlled by one bell push

One 5A modular switch socket point on same board board

One 5A modular switch socket point on independent board

M&L in repair for point wiring complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex / Plaza

S & F IN REPAIR modular switch 1 way 6A, 1 module complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F in repairs modular switch 1 way 16A, 1 module all as specified and directed. Make: Anchor/Roma/Legrand.

S & F IN REPAIR in replacement of Bell push modular type 5/6 Amps, 240 volts SP complete all as directed. Make: Anchor/Roma/Legrand.

S & F IN REPAIR modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed. Make: Anchor/Roma/Legrand.

S & F IN REPAIR in replacement of lamp holder PVC/polycarbonate insulated body type complete all as directed.

S & F in repairs modular socket 6/16A,2/3 pin, combined 2 module all as specified and directed. Make: Anchor/Roma/Legrand.

S&F for modular fan step regulator, 120W - 2 modular complete all as specified and directed. Make: Anchor/Roma plus/Legrand

S & F IN REPAIR in replacement of bell, DINGDONG type, 6 Amps, 240 volts, SP complete all as directed.

S & F IN REPAIR in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed. Make - Legrand cat part No 5078 11 or equivalent Cat part in siemens/C&S

S & F IN REPAIR ceiling rose surface bakelite 65 x 50mm, flush type, 3 terminals complete all as specified and directed.

S & F IN REPAIR MCB SP 6-32 Amps,10KA, 'C' series 240V complete all as specified and directed. Make: Legrand cat No 4085 85-95 or equivalent Cat part in Seimens/GE

S & F IN REPAIR MCB SPN 40 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make: Legrand cat No 4086 18 or equivalent Cat part in Seimens/GE

S & F IN REPAIR MCB SPN 63 Amps,10KA 'C' Curve 240V complete all as specified and directed. Make: Legrand cat No 4086 20 or equivalent Cat part in Seimens/GE

S & F in repirs LED light fitting 20W, 230 V, 4 feet surface monted, indoor decorative aluminium extruded T- 5 LED batten, integrated type etc., complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core twisted flexible copper conductor cable with suitable size and all as directed. Make- C & S cat part No. LTTB4F20WLED/W (Nakshatra series) , or equivalent cat part in Crompton/Wipro /Philips

S & F in repair of Triple pole and neutral enclosure with a three pin and earth plug and socket complete with one single pole MCB 63A complete all as specified and directed. Make :Legrand cat No 5078 64 or equivalent cat No. in GE/Seimens

Supply and fixing walll/surface mounted 10W LED, 2 feet batten fitting engineering plastic battern with white acrylic cover complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round block-02 Nos including connecting up with twin core copper conductor cable with suitable size and all as directed. Make : C&S cat part No. LTTB2F10WLED/W or equivalent in CG/ Bajaj / Philips

S &F in repair LED Bldg Security Light 25 watt (INDUS-E SERIES) Power coated pressure die cast aluminium SMD LED Street Light with integraed lens complete all as specified directed. Make-Bajaj cat part No-BRLEP 25W LED WH, C&S Cat part No- LTESSE25WLED or equivalent cat part in CG/ Bajaj / Philips

Supply and fixing in repair Recessed full / Surface type LED 2X2 Luminaire 36 watt and CRCA powder coating housing with anti-glare diffuser, New deep back lit type surface mounting LED Luminaire provides high quality ecomonic energy saving lighting suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCTLSN-36-CDL(2X2) / C&S cat No LTCSP36WLED2X2 or equivalent Cat part in Bajaj / Philips / Shakti

Supply and fixing in repair Ultra slim edge lit type recess mounting LED 2X2 Luminaire 36 watt and extruded aluminium housing with anti-glare diffuser provides high quality ecomonic energy saving lighting LED Luminaire suitable for 600 x 600 mm modular/POP/Gypsum ceiling complete all as specified and as directed. Make: Crompton cat No LCPL-36-CDL(2X2) / C&S cat No LTCRSLM36WATT 2X2 or equivalent Cat part in Bajaj / Philips / Shakti

Supply & Fix LED Slim down light 6 inch x6 inch not less than 12W LED 6 white/ warm white LED Round / Square Recess PDC Aluminium Housing Downlights,warm light all as specified directed. Make -C&S /Bajaj / Philips

Supply & Fix LED Slim down light 9 inch x 9 inch not less than 15W LED 6 white/ warm white LED Round / Square Recess PDC Aluminium Housing Downlights,warm light all as specified directed. Make -C&S /Bajaj / Philips

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6sq mm 4 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

Supply of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( average ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl all as specified . Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

Earthing continuity galvanised iron wire 4 mm or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed by Engineer-in-Charge.

Earthing continuity galvanised iron strip 25 x 3 mm or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed by Engineer-in-Charge.

shubham construction

NOEL ENGINEERS

M/s S.D Construction Co

Shree Ayyappa Engineering