Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L 1₹28.8 LAccepted-AOC | L 1 | Accepted-AOC L-1 | |
| 2 | L 2₹31.3 L+₹1.5 L (5.03%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | L 2 | Rejected-Finance Other Than lowest | |
| 3 | L 3₹31.7 L+₹1.9 L (6.48%)Rejected-Finance 14 VEDRAJ COMPLEX GAUTAM BUDH MARG LUCKNOW LUCKNOW UTTAR PRADESH 226018 | LUCKNOW | UTTAR PRADESH | 226018 | L 3 | Rejected-Finance Other Than lowest | |
| 4 | L 4₹32.9 L+₹3.1 L (10.6%)Rejected-Finance | L 4 | Rejected-Finance Other Than lowest | |
| 5 | L 5₹34.4 L+₹4.6 L (15.4%)Rejected-Finance | L 5 | Rejected-Finance Other Than lowest |
Tender Value
₹38.6 L
EMD Value
₹77,300
Closing Date
7 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) LUCKNOW
GE (EAST) LUCKNOW
SPL REPAIR TO BLDG. NO P-9, P-12C AND P-12 UNDER GE (EAST) LUCKNOW
2023_MES_618045_1
GE/E/LKO/T-44 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) LUCKNOW
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
GE (EAST) LUCKNOW
₹77,300
Yes
10 Nov 2023
9 Sept 2023
9 Oct 2023
9 Sept 2023
7 Oct 2023
23 Sept 2023
Amount
Demolition of cement concrete (unreinforced) of any description and in any position as in roofs, floors (other than ground floors) and similar works complete all as specified and directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed.
M & L for applying Two coats of Plastic emulssion paint including primer on surfaces of wall of any description over 10cm width or girth, not otherwise described complete all as specified and directed. Note :- Plastic Emulsion Paint and primer of same manufacturer to be applied through mechanical means only.
M&L for complete removal of existing treatment of surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/ tint, complete all as specified and directed.
M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling & applying three coats of white wash, complete all as specified and directed.
M&L for preparation of old previously treated surfaces of walls and applying two coats of white wash on walls complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 2% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. Note : - Supply only water proofing compound shall be measured and paid for separately.
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emmulsion to be carried out through air less spray machine (Mechanical means)
M&L for preparation of surfaces and applying two coat of oil bound distemper with roller on New surface of wall with Primer etc. complete all as specified and directed.
M&L for preparation of surfaces and applying two coat of oil bound distemper with roller on old treated surface of wall ect complete all as specified and directed.
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed.
M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and directed.
Dismantling Asbestos cement (corrugated, semi corrugated etc), corrugated translucent sheeting sheets in roof covering complete all as specified and directed.
M&L for 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
Asbestos cement two adjustable plain wing ridge 6mm thick fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
S&F in repair of E-board of size 600 x 600 mm and 04mm thick white prelaminated sett embosed reinforced designer as approved ceiling board/tiles at any height complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for designer glazed ceramic tiles (coloured) 600x300x7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4, complete all as specified and directed.
M&L for non skid coloured ceramic tiles, joint free 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors with borders, including over 15mm thick screed bed in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but not exc 4 sqm each, complete all as specified and directed.
S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates, hinges, hold fast etc. complete all as spcefied and directed
S&F for 30mm thick factory made flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as spcefied and directed .
S&F for 35mm thick factory made glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.
M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil, complete all as specified and directed.
M&L for cement concrete type C-2 1:3:6 using 40 mm graded stone aggregate in filling foundation and mass concrete, complete all as specified and directed.
S&F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.
S&F pre painted galvatume aluminium zinc coating GI based corrugaed sheet steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with L type or J type or cranked hook bolts complete all as specified and directed.
S&F for Pre-laminated galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
M&L preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide complete all as specified and directed
M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M&L 100 mm thick cement concrete type B2, 1:2:4 (40mm graded stone aggregate) as in floors, finished cemen concerete even and smooth, etc complete all as specified and directed.
Dismantling of steel windows/ventilators withot taking off shutters, complete all as specified and directed.
S&F for powder coated alumium glazed window shutter sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rails 100x44mm including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and including glazing by using 5mm thick plain sheet glass and stainless steel wire mess of dia 0.36mm and aperture 1.4mm, complete all as specified and as directed. (Note-glazed shutters glass thickness not less than 5.00 MM and wiremess shutter with SS wiremesh as approved by GE is also included. No extra payment will be made separately)
S&F for powder coated (minimum thickness of powder coating 50 micron) ofaluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F for glazed anodised (minimum thickness of powder coating 50 micron) aluminum shutter, Glazing shall be of 4.8 mm thick sheet, fixed with rubber gasket and aluminum glazing clips, section of aluminum shutter of following sizes:- (i) Styles 85 x 44.45 x 3 mm thick section No- 4526 (ii) Top rail 95.25 x 44.45 x 1.7 mm thick section No-4553 (iii) Middle/lock rail 83.50 x 44.45 x 1.7 mm thick section No-4565 (iv) Bottom rail 114.3 x 44.45 x 2.82 mm thick section No-4529 (v) Glazing clip 0.70 mm thick section N0-4407 all as directed (vi) Handle: Round aluminum handle 100mm girth and as per sample (vii) Tower bolt: 9.90 mm dia sheet and section Ano-4002 7, 200 mm long (viii) Mortic lock: 100 mm size 4 lever.
S&F for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F in repair 4.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane in any location and height including hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples or necessary welding works for MS windows, complete all as specified and directed.
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with miniumum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screw @ 200 mm centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standred section around the opening complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for brick work using old size fly ash brick, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed.
S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete, all as specified and directed.
S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.
S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.
S&F in repair vitreous china wash hand basin ovel type , white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified and directed.
M&L for 18-20 mm thick granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like, over 20mm thick screed bed in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite, complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking plateform incl making hole for gas pipe and other similar situation complete all as specified and directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified and directed.
S&F PVC solid door frame of size 50x47mm made out of 5m plain coloured sheet reinforced with MS square tube & with wood grain printed complete all as specified and directed.
S&F for factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per pecifications & drawing complete all as specified and directed.
Demolition and breaking up or taking down PVC/AC/CI/SSW 100mm bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed.
S&F 75mm/100 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/laid in trenches including PVC holding clamps, complete all as specified and directed.
S&F PVC (SWR) floor 'P' trap of size 110/110mm, complete all as specified and directed.
S&F for 110mm PVC (SWR) WC connector bent type, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.
Dismantling RCC/PVC water tanks and removing for capacity exceedin 250 litres & not exc 500 litres etc., complete all as specified and directed.
S&F of 500 Litre capacity Rotational moulded polyethylene water storage tanks, white colour, Triple layered (cylindrical, vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete all as specified and directed.
S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and directed.
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, complete all as specified and directed.
S&F CP grating 125mm dia with waste hole complete all as specified & directed.
S&F CP grating 125mm dia without waste hole complete all as specified & directed.
S&F PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified & directed.
S&F in repair long body 15mm bore bib tap, fancy type, chromium plated, cast copper alloy, with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S&F in repair two way 15mm bore bib tap, fancy type, chromium plated, cast copper alloy, with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.
S&F in repairs CP angle valve, fancy type long body for 15 mm bore pipe with capstan head long screwed shank including cp cover plate complete all as specified & directed.
S&F 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete all as specified and directed.
S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed.
S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and directed.
S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified.
S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified
S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint complete all as specified and directed.
S&F in repair health foucet (hand shower) 80 mm dia, 1 m long flexible metal tube and wall hook/holder in polished crome complete all as specified and directed.
S&F steel water tubes medium grade, galvanised with all fittings 15mm bore fixed complete to concealed in walls and ceiling or laid in floors including taking down existing GI pipe complete all as specified and directed.
Cutting chases for concealed water tubing and making good to disturbed surfaces in CM1:3, cutting not exc 10cm in girth complete all as specified and directed.
S&F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes, complete all as specified & directed.
S&F rolled mild steel section as in main and cross beam, hip and jack rafter, purlinewhere connected to common rafter and running rail and guides for sliding door, fixed with angle cleat or other connecting plates, confirming to Fe-410W (Gde-E-250) quality-A, complete all as specified and directed.
M&L for exterior vitrified Johson Endura tiles, superior quality of size 30cm x30cm x 10mm thick, with white cement and pigment, set and jointed & pointed in neat cement slurry over and including 15 mm thick screed bed in CM 1:6 as in floors complete all as specified and directed.
M&L for 50 mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed.
Forming construction joints 30 mm deep x 10mm wide filled with sealing compound grade "A." complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed
M&L for precast RCC 1:2:4 type B-0 using 20mm graded stone aggregate as in Chhajjas, cover slab, shelves and similar articles set in CM 1:4 complete all as specified and directed. Note:- Reinforcement shall be measured & paid separately
S&F PVC coated 25mm dia Mild steel pipe as in curtain rods includin brackets and fancy type end knobs, complete all as specified and directed.
M&L for TMT bars 10mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F of 4.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.
S&F of 5.00 mm thick tinted sheet glass ordinary quality and glazing with oil putty, rubber beading etc complete all as specified and directed.
M&L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) 10 mm thick plastering in CM (1:4) using 100 % coarse sand on roof / parapet walls with WPC @ 2 % by weight of cement. (b) Applying a coat of bitumenous primer @ 0.50 Kgs/Sqm on prepared surfaces and allow to dry. (c ) Applying a coat of hot blown bitumen 85/25 grade @ 1.20 Kgs/Sqm over primer. (d) Suply and laying of 3mm thick (Minimum) polymeric water proofing membrane weighing not less than 3 Kgs/Sqm. (e) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20 Kgs/Sqm . (f) Blinding with dry coarse sand @ 0.50 to 1.0 Kg /Sqm dusted over bitumen. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.
Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.
All as per serial item No 96 here-in-before but one 3 pin, bell push point controlled by one, one way bell switch 05 Amp with bell push.
All as per serial item No 96 here-in-before but one 3 pin, 05 Amp socket outlet point on independent board controlled by one, one way switch 05 Amp.
All as per serial item No 96 here-in-before but one 3 pin, 05 Amp socket outlet point on same board controlled by one, one way switch 05 Amp.
All as per serial Item No 96 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 15 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.
Supply and fix switch piano flush type, 05 Amp, single pole, one way, 230 Volt complete all as specified & directed.
Supply and fix socket outlet 2 in 1, 5 pin, 05 Amp, flush type, 230 volt complete all as specified & directed.
Supply and fix switch socket combination outlet 2 in 1, 3 pin, 05 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.
Supply and fix fan step regulator, AC, 230Volt, 120W, 2 module, switch type, complete all as specified and directed
Supply and fix in repair/replacement LED tube light fittings 1200 mm, 20W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20, oprating voltage range- 140-270,with aluminiun housing body higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.
Supply and fix in repair/replacement LED tube light fittings 600 mm, 10 W, 240V, 50Hz,rated input current- 0.070-0.110, rated input watt 20, oprating voltage range- 140-270, P.F- not less then 0.95,with aluminiun housing body higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.
Supply and fix in repair/replacement of recessed mounted 2'x2' LED ceiling light fitting 36 watt, 6500K, with IP 20 protection comprises of CRCA housing, high efficiency diffuser cover, electronic driver, etc with aluminiun housing body and all accessories pre-wired including connecting up complete all as specified and directed.
Supply and fixing in repair/replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), with down rod min 6 fit 15 mm GI pipe medium grade with nessaccery fixing arrengement complete all as specified and directed.
S&F in repair/replacement exhaust fans, plastic body, AC, single phase, 230/240 V of size 250 mm sweep with louver and necessary wall cutting making connection with twisted copper flexible wire 23/0.076mm complete all as specified and directed.
Supply and fix in repair/replacement of recessed surface round/ square mounted 1'x1' LED ceiling light fitting 15/18 watt, 6500K, with IP 20 protection comprises of with aluminiun housing body , high efficiency diffuser cover, electronic driver, etc and all accessories pre-wired including connecting up complete all as specified and directed.
Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
Material and labour for sub main wiring with 4 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
Supply and fix in repair/replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make: - Legrand, Cat No. 5078 11 & 4085 93, Hager, Cat No : VYA120C & NCN120N or Schneider, Cat No : A9HMS220 & A9N1P20C
Supply and fix in repair/replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt,12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.Make: - Legrand, Cat No. 5078 11 & 4085 93, Hager, Cat No : VYA120C & NCN120N or Schneider, Cat No : A9HMS220 & A9N1P20C
Supply and fix in repair/replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN),double door, AC, 440 volt, 4 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed Make :-Legrand, Cat No. 5077 50 & 5079 38 or equivalent in Hager, Cat No : VYV04PM & VYV00E or Schneider, Cat No : A9HVD04M & A9HVDXXWB and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. Make :-Legrand, Model : DPX 160, Cat No. 4200 16 or equivalent in Hager, Cat No : HDA126Z or Schneider, Cat No : LV516312 (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos. Make :-Legrand, Cat No. 4085 87 to 4085 95, Hager, Cat No. NCN106N to NCN132N or Schneider, Cat No. A9N1P06C to A9N1P32C
Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Supply and fix in replacement of MCB, SPN , AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.
QUALITY CONSTRUCTIONS CO
M/s Arora Trading Co
M/s Bhadoria Associates
m/s raghubar dayal
M/s Rathore Traders
ANIL CONSTRUCTION
Abode Artisan Enterprises
M/s Sudhir Enterprises
M/S S S A ASSOCIATES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .