01Saleran Dam

Amount

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Brick ballast well or over burnt, broken and screened through a 32mm x 32mm square mesh screen laid consolidated and rammed to a finished thickness of 75mm as above.

Cement concrete 1:4:8(M 7.5) With stone aggregate 40 mm gauge mixing by mechanical means using concrete mixer volumetric type. Complete in all respect as per drawings,designs, specifications and instructions of Engineer- in-charge.

Cement concrete 1:2:4 With stone ballast or shingle, mixing by mechanical means using concrete mixer volumetric type

Structural steel work in compound girders or Stanchions built up from two or more R.S. joists or channel section or plates & angles etc. including cutting and fixing all lattice bars, stiffeners, gusset plates, bolts, nuts, rivets, welding rod, etc. complete with flange plates, heads, sole plates, angle connections, etc. with hoisting and erecting in position

Cement Board 24 mm Thick for Floor Base

Teak wood planking planed on both sides rebated and fixed in position including nails screws etc.

(e) 25 mm thick

Cement Board 12 mm Thick for :-

Providing & fixing on external side of finished external wall, extruded polystyrene (XPS) thermal insulating boards with ship lap joining on length side, (having thermal conductivity of 0.028 W/m.K on 90 days aging at 24 deg.C as per ASTM C518, compressive strength of over 250 kpa as per ASTM D1621, tensile strength of over 300 kpa as per ASTM D1623 and has flammability of Class B2 as per DIN 4102, water absorption of less than 1% as per ASTM D2842) with the help of a minimum 2 mm thick polymerized mortar adhesive & mountings as per manufacturer's guidelines; over the installed XPS boards, providing & laying a 3-4 mm thick finishing layer of polymerized mortar base coat with fibre glass mesh of min. 150 gsm embedded in it using notched trowel as per manufacturer's guidelines and as per the instruction of engineer-in- charge. 100 mm thick Extruded polystyrene rigid insulation board.

Treated Pinewood Interior Walls with Mat Finish

Asphalt Shingle Roofing for Rooftop

Stone Coated Metal Roofing for Rooftop

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications

Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two or more coats applied @ 1.43litre/10 Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Painting two or more coats Italian Pigmented PU white glossy or matt in all shades on wood work surface to give an even shade Including Preperation of surface/base complete as per specification

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

uPVC Sliding Three Tracks Door (7ft*10ft) with One End Fixed Panel & Two Sliding Panels (39mm*90mm), 8mm toughened glass, soft closing including its chokat of door -106mm*50mm and sliding pleated mesh.

uPVC Sliding Three Tracks window (6ft*4ft) with One End Fixed Panel & Two Sliding Panels (39mm*90mm), 8mm toughened glass, soft closing including its chokat of door -106mm*50mm and sliding pleated mesh.

uPVC Sliding Three Tracks window (4ft*4ft) with One End Fixed Panel & Two Sliding Panels (39mm*90mm), 8mm toughened glass, soft closing including its chokat of door -106mm*50mm and sliding pleated mesh.

Imported Teak Wood doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position. A Panelled, glazed or glazed and panelled.

35mm thick

30mm thick

15" Exhaust Fan

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. Size 75 mm x 75 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes single socketed (working pressure 4 Kgf/cm²) conforming to IS: 4985, including fixing with MS clamps. U-PVC pipes (working pressure 4 Kgf. / sqcm) pipe 110 mm dia.

Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge. UPVC 110mm bend.

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 Kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glossy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with pigment of matching shade complete.14.127

Providing, Laying , fixing & jointing of P.V.C.Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications xxviii) 160mm o/d PVC pipe of 2.5 Kgf./sqcm

Supplying and Fixing uPVC Equal Tee of 4kgf/cm2 Pressure confirming to relevant IS Code with latest Amendments if any at Site of Work. Complete in all respect as per Designs, Specifications and Instructions of Engineer-in-charge - 160x160x160mm

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)

Providing & Fixing in position stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P Brass 15mm stop cock Male and female end

Providing and fixing in position Vitreous chinaware lavatory suites of approved (To the approval of engineer in charge) consisting of C.P brass waste 32mm dia, with one C.P. brass pillar tap including rack bolt, screw pair, 115mm long complete in all respect. Table Top round (size 40.5 x 40.5 x 14cm)

Providing and fixing vitreous chinaware standard pedestal of approved make (to the approval Engineer in charge) for wash hand basin complete in all respect. (i)Vitreous chinaware white pedestal for wash hand basin

Providing and fixing PTMT urinal cock of approved make (to the approval of Engineer-in charge) 15 mm nominal bore, 80mm long. 42 mm high and 30mm wide with BSP female threads weighing not less than 48gms of approved quality and colour complete in all respect

Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of the Engineer-in- Charge)

Laboratory cock swan neck One Way

Laboratory cock swan neck Two Way

Providing & Fixing in position C.I Bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineer-in charge ) complete in all respect. (ii) 20mm i/d

Providing and fixing Centrifugally cast iron Floor traps conforming to I.S.I. Specification (IS:3989) of approved make (to the approval of Engineer-in charge) of the self-cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors, etc. minimum depth of water should be 150mm with a minimum seal 50mm. (d)100mm x 75mm i/d deep seal

Supply and erection of Compression glands, Locking arrangement, Checknuts for PVC flexible pipe complete with as required – (a) PVC compression Socket gland 20mm dia.

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.

C.P. brass towel Rails size 15mm dia 610mm long

C.P brass towel ring

C.P. brass towel bracket (610mm long)

Providing & Fixing in position mirror of superior glass Size 1500mm x600mm or any other required size (of approved quality) and of required shape and size with high quality polystyrene moulding frame of 40 to 50mm size (of approved quality and shade) with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers complete in all respect

Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects.

uPVC Pipe 10 Kgf/cm2 - a)20mm i/d

Providing and fixing in position C.P. brass overhead shower arm chrome round or square with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. Vi) CP Brass rain Fall Shower arm 24" length square chrome

Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in charge) complete in all respect B) C.P. Brass Accessories: iv) C.P. brass toilet roll holder with flap

Providing and fixing divertors of approved make (to the approval of Engineer-in-charge) for bath and shower system complete in all respect. c )Single lever concealed divertor for bath and shower system (3 inlet flow) with body and upper part

Providing and fixing in position H.C.I. soil waste vent or anti syphonage pipes to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing. a ) 150 mm i/d H.C.I. pipe lines laid complete

Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.

Providing & fixing in position C.P brass Sink mixer swinging spout (table mounted) with 450mm long flexible hose of approved make (to the approval of Engineer-in-charge) complete in all respect

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick, grade-304 (18/8) with waste coupling complete in all respect. B) Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm

Providing and fixing PTMT Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling 77mm breadth with 25mm minimum water seal, weighing not less than 260gms of approved make (to the approval of Engineer-in-charge) for wash hand basin and sink complete in all respect.

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge) fixed into wall with rawl plugs and C.P brass screws complete in all respect.

Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. a) Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect.

Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. a) Chinaware extended wall mounted E W.C. with matching chinaware cistern and seat cover complete in all respect.

Providing and fixing C.P. brass Urinal Spreader Ocular-Regular complete with fittings for urinals complete.

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (With fan box)

Wiring light point

Wiring call-bell point

Wiring 6Amp. wall socket point

Wiring 6Amp. Plug control comprising wall socket point

Wiring 16/20Amp. power plug control point

Wiring light point with double control switches.

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protecto, color coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- (iii) SP&N Double Door Distribution Board 12 way each.

MINIATURE CIRCUIT BREAKERS/RCBO's/ RCCB's: MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs: - (xiv) MCB Four Pole 6-32amp. (10kA, Curve-C)

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge: -

(ii) Overall size 1.5sq.mm (Un-sheathed)

(iii) Overall size 2.5sq.mm (Un-sheathed)

Supply and erection of Capacitors of different capacity for ceiling fans, exhaust fan & street light fittings etc: - (d) Capacitor 6µF

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc:- 16/20amp. Universal Modular Shuttered Socket (two Module)

ERECTION, REPAIR AND REWINDING OF FANS: ERECTION OF FANS: Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete:-

Erection of Ceiling fan

Erection of Cabin fan on the wall

Erection of Exhaust fan with louver shutter on the wall/window grill

Ceiling Fan 50W

15" Exhaust Fan

18 W L.E.D Bulb

Any Other Items (as per CSR)

MITTAL CONSTRUCTION COMPANY