PROVN OF OFFICERS PORTA CABIN NEAR WATCH TOWER NO 2 AT INS

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed.

Rough excavation not exceeding 1.5 m deep and getting out in any type of soil all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil all as specified and directed.

Excavating over areas, exc 1.5 m and not exc 3.0m deep and getting out in hard/dense soil all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft/loose soil all as specified and directed.

Returning and filling in including spreading levelling watering and well ramming in layer n.exc 25 cm using soil obtained from excavation all as specified and directed.

Spreading levelling watering and well ramming in layer n.exc 25 cm using surplus soil obtained from excavation all as specified.

Removing excavated material to a distance n. exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point all as specified and directed by Engineer-in-charge.

Removing excavated material to a distance exc.250m and n.exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed by Engineer-in-charge.

Material and labour Loose filling with broken stone or boulders of gauge 80 to 150 mm in soakage pits, soakage wells all as specified and directed.

Material and labour for Hardcore with broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

Material and labour providing Cement Concrete in foundations, filling and mass concrete type B2 ,1:2:4 (using 40 mm graded aggregate)complete all as specified .

Material and labour providing Cement Concrete in foundations, filling and mass concrete type C2 ,1:3:6 (using 40 mm graded aggregate) complete all as specified .

Material and labour providing Cement Concrete in foundations, filling and mass concrete type D2 ,1:4:8 (using 40mm graded aggregate)complete all as specified .

Material and labour PCC 1:2:4, type B0(using 12.5 mm graded stone aggregate) as in kerb stone rounded or chamfered on edges including necessary form work etc. all as specified and directed.

Material and labour Plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in coping, kneelers water throughs bed plates, kerbs and like including weathering, slightly rounded or chamfered engles and throating, finished even & smooth without using extra cement including necessary form work etc.complete all as specified and directed.

Material and labour precast cement concrete block with 1:3:6 type C1 using 20mm graded stone aggregate for block masonry with solid blocks exc 10cm in width and setting in cement mortar 1:4 complete all as specified.

Material and labour precast cement concrete block with 1:3:6 type C1 using 20mm graded stone aggregate for block masonry with solid blocks , 7.5cm in width, setting in CM 1:4 all as specified and directed.

Providing precast ce-ment concrete type B1 ,1:2:4 (using 20 mm graded aggregate)in lintels n.exc 1.5m clear span with plain fair faces, including cham-fers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match all as specified and directed.

M&L for Precast RCC Type B1 1:2:4 (using 20mm graded stone aggregate) in landings, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM 1:4. Note : Reinforcement shall be measured and paid separately.

Material and labour Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregate) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed.

Material and labour Reinforced cement concrete design mix M-30 (using 20mm graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed.

Material and labour Reinforced cement concrete design mix M-30 (using 20mm graded stone aggregate), beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

Material and labour Reinforced cement concrete design mix M-30 (20 mm graded aggregate) for column, pillars, piers, posts and struts all as specified and directed.

Material and labour Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement , including forms, moulds, mitred/stopped ends etc complete all as specified

Material and labour Extra for forming fair finished drain or channel 45cm inner girth in cement concrete using extra cement , including forms, moulds, mitred/stopped ends etc complete all as specified.

Supply only Integral water proofing compound complete all as specified and directed.

Material and labour broken stone or boulder of size 40 to 80mm ,filling dry hand packed at back side of retainning wall for weep holes as specified and directed.

Use and waste of formwork using steel shutter flat to sides of concrete foundations, footings, bases of columns, and plinth beams and similar work vertical or to batter rough finished surfaces of concrete all as specified .

Use and waste of formwork using steel shutter flat to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n.exc 200mm thick(horizontal or sloping) all as specified.

Use and waste of formwork using steel shutter flat to sides of concrete of pillars, posts, struts, piers, and beams exceeding 1.5m span columns and stanchions square, rectangular or polygonal fair finished all as specified.

Use and waste of formwork using steel shutter flat to sides of concrete slab n.exc 200mm thick,chajjas,fins facia, para pets and similar work vertical or to batter fair finished surfaces of concrete all as specified.

Supply and Fixing Tubular towel rail 20mm dia, brass chromium plated in brackes including suitable brackets all as specified and directed.

Material and labour MS work such as rungs, handles to manholes, etc as directed by Engineer-in-charge.

Material and labour mild screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut of any length and not exceeding 15 mm dia complete all as specified and directed by Engr-in-Charge .

Material and labour Mild steel TMT Bars 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed ) not less than 0.9mm dia., or securitn with clips

Material and labour Mild steel TMT Bars 6 to 8mm dia cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed ) not less than 0.9mm dia., or securitn with clips all as specified .

Material and labour Mild steel TMT Bars 5mm dia and over up to and including 10mm dia as in stirrups cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with MS wire (annealed ) not less than 0.9mm dia., or securitn with clips all as specified.

Material and labour structural steel section Fe-410W (Gde E- 250) quality-A, as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices, frames for wall panels etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, including cutting, notching, drilling, fitting, riveting and/ or welding or connecting with nus, bolts, providing and fitting cleats, fish plates, gusset plates etc. complete all as specified and directed.

Supply & Fixing Hollow structural steel section, cold/hot formed, rectangular/square section , of specified 1st grade as in trusses of any shape and size, vertical post/column/structs/ top pipe of any shape and size and similar work, complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including cutting, notching, drilling, fitting, riveting or welding or connecting witj nuts , bolts, providing and fitting cleats, fish plates, gusset plates etc complete all as specified.

S&F Anodised aluminium frame Powder Coated (minimum thickness of powder coating 50 micron) for doors, partitions, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Material and labour Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Material and labour Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashing, eaves board etc, cut to length and bend to shape and fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Material and labour Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Material and labour Providing PCC 1:3:6 types C1 (using 20mm graded stone aggregate) 75mm thick as in plinth protection, with necessary expansion joints as specified in SSR, finishing cement concrete surface even and fair without using extra cement.

Material and labour 75mm thick PCC 1:4:8 type D-2, (using 40mm graded aggregate) as in sub base to floor etc complete all as specified.

Material and labour 100mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified.

Material and labour 40mm thick Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor including finishing the cement concrete surface to receive the fixing of tiles complete all as specified.

Material and labour 100mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor/hard standing including finishing cement concrete surface even and smooth and finally finishing the surface by belting/brooming without using extra cement complete all as specified.

Material and labour Vitrified Ceramic tiles 600x600x10 mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

Material and labour Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

Material and labour chequered cement concrete coloured tiles of size 30cmx30cmx25mm thick, set, jointed and poeinted in neat cement slurry and pointed with grey cement and pigment complete all as specified.

Material and labour rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement complete all as specified.

Material and labour rendering 5 mm thick in CM 1:4 over backing coat of 10 mm thick in C M 1:6, complete, the 5mm thick finishing coat shall be mixed with water proofing compound @3% by weight of cement and finished even and smooth without using extra cement all as specified and directed Note:-WPC shall be measured and paid separately under relevent item of this schedule.

Material and labour for rendering 15mm thick in Cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement.

Material and labour 15mm thick screed bed in CM 1:4 as bedding layer in floors for receiving tiles complete all as specified and directed.

Material and labour applying two coats of cement base paint over a coat of primer on new plaster or untreated surfaces on walls including preparation of surfaces all as specified.

Material and labour for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper on over a coat of primer all as specified.

Material and labour applying two coats of synthetic enamel paint over coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description not otherwise described over 10cm width or girth complete all as specified.

Material and labour GI pipe light grade 80mm for cable protection laid in trench/wall/floor complete all as specified and directed. .

Material and labour GI pipe light grade 25mm for cable protection laid in trench/wall/floor complete all as specified and directed. .

Supply & Fixing 50mm dia low density polythelene pipe(LDPE) of pressure rating 6 Kg/SqCm fixed in weep holes complete all as specified.

Supply & Fixing 3- layer PP-R (Polypropylene random copolymer) pipes SDR 11, 20mm outer dia, UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings fixed on floor/wall/ceiling/laid in trenches complete all as specified and as directed.

Supply & Fixing 3- layer PP-R (Polypropylene random copolymer) pipes SDR 11, 25mm outer dia, UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings fixed on floor/wall/ceiling/laid in trenches complete all as specified and as directed.

Supply & Fixing 3- layer PP-R (Polypropylene random copolymer) pipes SDR 11, 32mm outer dia, UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings fixed on floor/wall/ceiling/laid in trenches complete all as specified and as directed.

Supply & Fixing PP-R gate valve (brass insent) ISI Marked, screwed both ends suitable for PP-R pipe of bore 20mm outer dia complete all as specified and directed.

Supply & Fixing PP-R gate valve (brass insent) ISI Marked, screwed both ends suitable for PP-R pipe of bore 25mm outer dia complete all as specified and directed.

Supply & Fixing PP-R gate valve (brass insent) ISI Marked, screwed both ends suitable for PP-R pipe of bore 32mm outer dia complete all as specified and directed.

Supply & Fixing Rotational moulded polyethlene water storage tank, double layered 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete including float valve 25mm dia suitable for inlet all as specified and directed.

Supply & Fixing 15mm bore dia brass CP bib tap fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

Supply & Fixing 15mm bore dia Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and directed.

Supply & Fixing 15 mm bore dia Stop valves fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed.

Supply and Fixing Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) for bore dia of discharge pipe 40mm all as specified.

S&F Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) for bore dia of discharge pipe 40mm all as specified.

Supply and Fixinggrating doom 100mm dia of PTMT (Minimum weight 25 gms) all as specified.

Supply and Fixing CP hand shower (Health Faucet) with 1 meter long easy flexible tube in chrome finish & wall hook complete suitable for 15mm bore pipe complete all as specified directed.

Supply and Fixing swivel shower with arm 225mm long of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) all as specified. Make : Cat Part No 181 C of Prayag (or) equivalent.

Supply and Fixing PVC connection 15mm dia and 300mm long with synthetic metal nut all as specified..

Material and labour 100 mm internal dia Cast iron (Sand Cast pipes), confirming to IS 1729-2002 soil,waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engr - in - charge.

Material and labour 150 mm internal dia Cast iron (Sand Cast pipes), confirming to IS 1729-2002 soil,waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed by Engr - in - charge.

Supply & Fixing CI bend 100 mm dia (any radius) diminishing pieces etc all as specified and directed.

Supply & Fixing Bends 100mm dia CI bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured) all as specified and directed.

Supply & Fixing for CI Branch pipes 100mm dia (equal or unequal) with parellel branches all as specified and directed.

Supply & Fixing 100 mm dia CI 'P' or 'S' trap all as specified and directed. .

Supply & Fixing CI cowls suitable for 100 mm dia pipe complete all as specified

Supply & Fixing 100 dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified and directed.

Material and labour for PCC 1:3:6 type C2 as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for CI pipe 150mm bore all as specified and directed.

Supply & fixing salt glazed stoneware gully traps square type 'P' and size of gully trap 150 x 150 mm.

Supply & fixing brass chromium plated toilet paper holder including rod and fixed to walls with screws and PVC rawl plugs complete all as specified and as directed.

Supply & fixing Vitreous China wash down water closet EWC pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and as directed.

Supply & fixing Vitreous China wash hand basin, flate back, size 580x450mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified.vitreous China wash hand basin of size 600x480mm white flat back including , waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, fixing only chromium plated pillat tap complete all as specified and as directed by Engineer-in-Charge.

Supply & fixing 10 litre PVC valveless, syphonic action type flushing cystern low level with inlet valve, float and handle and PVC outlet suitable for IWC/EWC all as specified.

Supply & fixing CP brass soap dish, any type fixed to plugs with chromium plated brass screws all as specified.

Supply and fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified.

Supply and Fixing looking mirror size 600 x 600mm consisting 5.5mm thick mounted with stainless steel stud 4 Nos on wall panel including necessary drilling complete all as specified

Supply and Fixing stainless steel sink, grade ss- 304,1mm thick for kitchen or laboratory with plug washers and waste fittings, including fixing in wall panel with cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm etc, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 3mm thick UPVC sleeves to pressed steel channels of 75 mm x 40 mm to make the mild steel unexposed to weather complete all as specified and directed.

Material and Labour for 110mm bore PVC( SWR) pipes for rain water , plain end ISI marked IS-13592, type 'A' , pressiure rating not less than 6kg/cm2 in any length fixed in walls, at every 6m with PVC elbow, MTA, MS clamps made out of 25x6mm flat, srew etc complete

Supply and Fixing 25mm thick plastrocrete panels for outer walls and partitions of single storey porta cabins, polymeric section filed with low density cellular concrete, panels of size 1000 x 300 mm, jointed together by tongue and grooved method to ensure 100% leak proof, including necessary fittings complete all as specified and directed

Material and labour for lipped channels made out of mild steel of grade Fe-410W (Gde E- 250) quality-A, as in floor grid, purlins, legs, stairs, floor runners, stringers, railings, stair support frames, etc., cold/hot formed of any shape and size and similar work including cutting, notching, drilling, fitting, riveting and/ or welding or connecting with nuts, bolts , providing and fitting cleats, gusset plates etc. complete all as specified and directed.

Supply and Fixing Aluminium composite panels of 3mm thick colour as approved including skin thickness of 0.25mm aluminium on both sides sandwhiched by 2.5mm polyethelene as specifed and all as directed .

Supply and Fixing aluminium windows openable type with powder coated standard aluminium sections (minimum 50 micron thick coating) of size 1000 x 1200 mm size with four shutters, out of two fixed with 4mm thick float glass and others with aluminium alloy wire cloth/mesh 0.45mm nominal dia of wire and average width aperture 1.40mm and fixed stables with including necessary joining cleats, anodised aluminium snap beading, srews etc, Stainless steel butt hinges of suitable size, locking handles complete all as specified and shown on drgs and as directed. Note:- The quoted rate is deeemed to be inclusive of glass pane and wire mesh, all fittings and accessories complete.

Supply and fix Aluminium ventilators with powder coated standard aluminium sections (minimum 50 micron thick coating) of size 600 mm x 935 mm width for toilet block porta cabin with openable shutters and fixed with 4 mm thIck pin headed glass including Stainless steel butt hinges of suitable size, locking handles complete all as specified and as directed. Note:- The quoted rate is deeemed to be inclusive of glass pane, all fittings and accessories complete.

Supply and fix aluminium door with powder coated standard aluminium sections (minimum 50 micron thick coating) of size 1000 x 2100 mm with two shutters with one shutter of panel insert of aluminium composite panel sheet of 4.0 mm thick and other shutter gauzed using aluminium alloy wire cloth/mesh 0.45mm nominal dia of wire and average width aperture 1.40mm and fixed stables with including necessary joining cleats, anodised aluminium snap beading, srews etc, complete , handles, Stainless steel butt hinges of suitable size, door stopper and necesaary builders hardware complete all as specified and shown on drgs and as directed. Note:- The quoted rate is deeemed to be inclusive of panel insert and wire mesh, all fittings and accessories complete.

Supply and Fixing aluminium door with standard powder coated aluminium sections (minium 50 micron thick) of size 900 x 2100 mm (single leaf shutter) partly panelled with panel insert of aluminium composite panel sheet of 4.0 mm thick and partly glazed with plain glass 5mm thick, necessary joining cleats, anodised aluminium snap beading, srews etc, complete , handles, Stainless steel butt hinges of suitable size, door stopper and necesaary builders hardware complete all as specified and shown on drgs and as directed. Note:- The quoted rate is deeemed to be inclusive of panel insert and glass panel, all fittings and accessories complete

Supply and fix 300mm long aluminium alloy, anodized, sliding door bolt with hasp staple (bolt type) and fixing clips sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

Supply and Fixing Aluminium anodized barrel lower bolts of extruded section and fixed of 200mm long.

Supply and fix factory made solid panel PVC door of size 760 x 1950 mm with shutter 25 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per SSR including all fittings such as SS hinges, handles, aluminium aldrop bolts etc complete.

Supply and Fixing sun shades with 250 x 6 mm thick polymeric panels with tongue and groove joints fixed to the 25 x 25 x 1.6 mm thick MS support frame work with no. 8 x 13 self tapping screws. The size of sunshade shall be 1200 x 500 mm complete all as specified and shown on drgs and as directed

Supply and Fixing 250 x 6 mm thick polymeric panels for false ceiling with tongue and groove joints fixed to the grid work self tapping srew incld GI frame grid work and suspended wire with nut bolts for making levelling complete all as specified

Supply and Fixing15mm dia brass CP bib tap two-way fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

Material and labour for Soling 150mm thick (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified .

Material and labour 15cm thick in two layer of 7.5cm (compacted thickness) WBM, with coarse aggregates of grading 2(63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified .

Forming 12mm thick & 100mm deep expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified .

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘B’ complete all as specified .

Material and labour for Cutting of 50 mm existing GI pipeline and taking a new connection with necessary fittings and 'T' joints of size 50 x 50 x32 mm complete all as specified . .

Material and labour for Construction of masonary valve chamber internal size: 600 x600x600mm, 100 mm thick foundation using PCC 1:4:8, type D-2, over 15cm thick hard core, 20cm thick solid block masonry with blocks set in cement mortar 1:4, 15mm thick plaster to internal surfaces and external surfaces up to 15cm below ground level and top of floor in cement and sand mortar 1:4, finished even and smooth with out using extra cement , 3.15mm thick MS sheet cover including 50mmX50mmX6mm thick MS angle frame fixed in PCC 1:2:4, type B1 coping with 25mmX6mm flat iron hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50m complete all as specified and as directed .

Material and Labour point wiring fixed on wall of plastocrete panel/ laying on top surface of false ceiling , controlled by one, one way switch, using 1.5 sqmm nominal cross sectional area multistranded copper conductor 1100 v , PVC insulated unsheathed (FRLS) , single core cables in and including 20mm dia , medium grade PVC conduit , with 1.5 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed FRLS earth wire etc, excluding terminal boxes all as specified for following:-

One light point controlled by one way switch 5/6 amps.

One ceiling fan/Exhaust fan point controlled by one way switch 5/6 amps.

One socket out let 5/6 amps point on the same board

One socket out let 5/6 amps point on the independent board

Material and Labour point wiring on independent box, fixed on wall of plastocrete panel/ laying on top surface of false ceiling for one 16 Amps socket outlet point on independent board controlled by one, one way switch, using 2.5 sqmm nominal cross sectional area multistranded copper conductor 1100V, PVC insulated unsheathed (FRLS) , single core cables in and including 20mm dia, medium grade PVC conduit, with 2.5 sqmm nominal cross section area multistranded copper conductor, PVC insulated unsheathed FRLS earth wire excluding terminal boxes complete all as specified.

Material and Labour point wiring on independent box, fixed on wall of plastocrete panel/ laying on top surface of false ceiling for one 20 Amps socket outlet point on independent board controlled by one, one way switch, using 4.0 sqmm nominal cross sectional area multistranded copper conductor 1100V , PVC insulated unsheathed (FRLS) , single core cables in and including 20mm dia medium grade PVC conduit, with 4.0 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed FRLS earth wire excluding terminal boxes complete all as specified.

Supply and Fix PVC box type switch Socket out let 3&2 pin 5A, 240 V, flush type universal controlled by one switch with ISI mark complete all as specified.

Supply and Fix PVC box type switch Socket out let 3& 2 pin 5/16 A, 240 V, flush type universal controlled by one switch with ISI mark complete all as specified.

Supply and Fixing switch piano flush type 5/6 amps single pole one way all as specified. Make : Anchor Penta/ Havell's Reo

Supply and Fixing MCB protection socket modular AC box four module, 20A socket, 25A, 3 pin plug with indicator complete all as specified.

Supply and Fixing MCCB TPN 63 Amps,415 Volt, 16 KA, in existing panel complete all as specified and directed.

Supply & Fixing ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

Supply & Fixing epoxy powder coated distribution box, double door for MCB, fixed to platocrete walls complete with IP 43 and metal door SPN, 8way all as specified and directed

Supply & Fixing Miniature circuit breakers, 240 Volts, 10 KA rating and to be housed in sheet metal enclosures ( distribution boxes) complete all as specified and directed of following sizes :- Note :- Proper and suitable size cable lugs to be fixed with Miniature circuit breakers are included in unit rate of each Miniature circuit breakers of any rating.

SP, 6 to 20 Amps

SPN, 20 Amps

Material and labour for LED tube light fittings slim panel type 1X24 W of dimension 224x224x20mm complete fixed on wall/ceiling and providiing connections with PVC insulated and sheathed conductor cable from ceiling rose to connector complete all as specified and directed. Make : As approved by GE

Material and labour for LED tube light fittings slim panel type 1X10 W complete fixed on wall/ceiling and providiing connections with PVC insulated and sheathed conductor cable from ceiling rose to connector complete all as specified and directed. Make : As approved by GE

Supply & Fixing LED type street light fitting 1 x 40W, pressure die casting aluminium housing with heat resistant toughened glass & IP 66 protection including mounting testing on completion.

Supply & Fixing Single Phase AC static hour meter 240 V 0.20 Amp with LCD display complete all as directed : Make : Havels / HPL / L&T / Secura

Supply, installing, testing, commissioning exhaust fan for toilet 200mm sweep, 230 volts, AC, 50 HZ 1300 RPM air delivery 282 cum / hr with accessories, and connecting the fan to ceiling rose with 3 core copper cable of size 23/0076 complete all as specified. Model : CRISP AIR L X of USHA (or) equivalent in Bajaj / Havells / Crompton.

Supplying , installing, testing, commissioning exhaust fan, 300 mm sweep, 230 Volts, AC , 50 Hz, 1370 RPM air delivery 1600 cum / hr with accessories, and connecting the fan to ceiling rose with 3 core copper cable of size 23/.0076 complete all as specified . Model : Aeroclean of USHA (or) equivalent in Bajaj / Havells / Crompton

Supply & Fixing ceiling fan 1200mm sweep,5 star rates , white/ coloured complete with down road, canopy and making connections with and including 3 core flexible cable, PVC insulated with Stranded copper conductor of suitable size

Supply & Fixing ceiling fan regulator, 5 step Electronic typen 2 module, 120 watt complete all as specified

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 75 sq mm 3.5 core

Supply and spreading clean, fine, dry river sand in trenches for cushioning of under ground cable / inside transformer yard complete all as specified and directed by Engineer-in-Charge.

Supplying and laying reinforced precast concrete cable cover, class LV, type of size 250 mm x 150 mm x 40 mm

Supplying, Installation testing and commissioning of 6 Mtr High pole top dia 70 mm and bottom dia 130 mm and base plate size 220x220x12 mm size pole fabricating out of medium grade tapered pole octagonal cross section and shall be continuosly tapered with single longitudinal conforming to BSEN 10025 or equivalent with base plate Fe 410 conforming to IS 2062 of suitable thickness with provision of 4 Nos foundation bolts EN 8 Gr. The pole shall be galvanized as per IS 4759/BSEN 1461 standards with average coating thickness of 66 micron inspection/housing with junction box, complete end termination etc with grouting of base plate in concrete foundation 1:2:4 concrete with non shrink polymeric water proof grouting compound admixture (of CICO or equivalent) including excavation, earth work, refilling etc. (All pole should be prewired from junction box to fixture with 2.5 sqmm size of wires and provision for mounting fitting such as GI brackets of 1.2 Mtr long on pole, all foundation wotk shall be as approved by GE). Note : - Quoted rate are deemed to including Earth work and excavation, necessary foundation i.e. reinforcement, holding down and standards and necessary accessories for mounting light fitting on pole.

Material and Labour for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia as main earthing lead (upto 7.5 m length from earth electrode to test point) by means of bolts, nuts , check nuts and GI washers and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:2:4) type B1 as in cover slab 54 x 54 x 5 cm including 8mm dia MS TMT bars @ 150 mm c/c as in reinforcement with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (Light Grade) for watering, charcoal or coal and salt in alternate layers including excavation earth work in any type of soil, RFR and removal of surplus soil complete all as specified and directed electrical plate No. 3 of SSR part - I

RAMESH ASSOCIATES

BHARAT MULTITECH INDUSTRIES PVT LTD

CITY CONSTRUCTION COMPANYU

M/s V M K Construction

AMR TRADERS