ADDN / ALTN TO SHED NEAR DRILL GROUND AT 11 GRRC UNDER GE (WEST) LUCKNOW

Amount

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth etc for foundation etc and getting out in any type of soil complete all as specified and as directed.

Surface excavation n. exc 30 cm deep and averaging 15cm deep and gettingout in soft /loose soil complete all as specified and as directed

Returning filling in and including spreading levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed

Demolition of brick or stone boulder masonary built in cement or cement lime mortar complete all as specified and as directed.

M&L brick work with fly ash brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

M & L for RCC M-25 (Design Mix) for Columns, pillars, piers, posts and struts, padestal etc complete all as specified and as directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

M & L for formwork to sides of pillars, posts, struts, piers, columns, pedastal and stanchions complete all as specified and as directed.

M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Material and Labour for rendering 15mm thick in CM 1:4 on brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and as directed.

M&L hard core of broken bricks of gauge n.exc 63 mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to true surface complete all as specified and as directed

M&L for 100mm thick PCC 1:2:4 type B1 (20MM graded stone aggregate complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in any type floor n exc 15 cm thickness below or above ground level complete all as specified and as directed.

S & F steel work in roof trusses (framed), truss, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, agnle channel or flat sections including distance pieces, cleats etc. confirming to Fe-410 grade-250 B complete all as specified and as directed

S&F framed work as in gusset plate for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fitting etc with welded, riveted or bolted of Fe-410 Gde 250A complete all as specified and as directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

S & F Pre- painted galvalume aluminum zinc coating GI based plaing steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

M & L for preparation of new steel surface of any description over 10cm width and girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for preparation of new surface of wall/roof including facia, cornices etc and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and as directed.

M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and as directed.

M & L for mild steel anchor bolts 20mm dia complete all as specified and as directed

S & F framed work such as grills, gratings etc with ends of bars shouldered and /or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.

M & L for filling soil including raising (or lowering) earth, spreading in layers n.exc 30cm thick, watering, ramming/rolling and finishing to required size shape etc n. exc 1.5 m high from base complete all as specified and as directed

M/S S S A ASSOCIATES

m/s raghubar dayal

ANIL CONSTRUCTION

Matrubhoomi Construction

Mount International

Abode Artisan Enterprises

abhinish traders

M/s J C Oberoi

QUALITY CONSTRUCTIONS CO

M/S KAUSHIK CONSTRUCTION

Bidder Name

M/S KAUSHIK CONSTRUCTION