33/11kV Substation Kherapara (West Garo Hills) and Karukhol (South Garo Hills) Package II

New 33/11 kV Substations

33/11 KV 2.5 MVA transformer with OLTC

33 KV VCB ( 36KV,1250 A, 25KA) with G.I mounting structure

33 KV Relay & Control Panel for 33 KV Feeder 110 V DC ( with numeric relay & static TVM and communication port for SCADA)

33 KV Relay & Control Panel for 33 / 11 KV Transformer 110 V DC with out differential protection and with communication port for SCADA

33 KV Single Phase Multi Core C.T. 400-200/5-5 A ( for Feeders)

33 KV Single Phase Multi Core C.T. 100-50/5-5 A ( for Transformer)

Mounting structure for 33 kV CTs

33KV Single Phase PT outdoor type oil filled, 33KV/√3 - 110V /√3 ,class-0.5/5P,30/30 VA

Mounting structure for PT

33 KV , 800 Amp Isolators triple pole single throw manually operated with earth Blade/switch as per IS (for incoming feeders)

33 KV , 800 Amp Isolators triple pole single throw manually operated without earth Blade/switch as per IS (for Transformers fdrs, PT, 33 KV incomers & DTR)

Mounting structure for 33 kV Isolator

30 kV 10 KA LA Class II ZnO Station Type

Insulated base for 30 kV LA

Surge counter for LA

Mounting structure for LA

30 kV 10 KA LA Class II ZnO Distribution Class for (line type) station supply DTR with mounting structure

11 KV Indoor 1250 A VCB Control and relay panel with 300-150/5/5 Amp CT, Static TVM and communication port for SCADA (for O/G feeders)

11 KV Indoor 1250 A VCB Control and Relay panel with 300-150/5/5/5 Amp CT with static TVM and communication port for SCADA ( for Incomer)

11 KV Indoor 1250 A VCB Control and relay panel with 300/5 Amp CT for incomer for bus coupler

11 KV lightning arrestor (9KV, 10KA), station type (for Transformers)

Mounting structure for 11 kV LA

11 KV , 800 Amp Isolators triple pole single throw manually operated with earth Blade/switch as per IS (for transformers)

Mounting structure for 11 kV Isolator

33/0.4 KV 100 KVA Station Service Transformer- EE-Level-2 latest amendment

33 KV HG fuse unit for station service transformer

Mounting Structure for 33KV H.G Fuse

DTR LT Cubicle with bus bar and 2 Nos Outgoing MCCB's for Station Service Transformer (outdoor)

Battery Bank (150 AH, 110 V)

Battery Charger with DCDB

LT ACDB with 1 incomer + 6 O/G + 3 phase Static CT Operated Energy meter

Switchyard Area Lighting :-

Floodlighting (LED) 50W 6000K with waterproof fixture incl all accessories

G.I.-Hexagonal- 8 meter pole for Street Light along with mast arm rise and nut bolts complete.

2-core, 4sqmm. 1000 V grade PVC copper Cable

Termination lug for above

LT AC Panel for switchyard Lighting with light sensor / solenoid switch

GI Conduits 20 mm

Bus System and Support Structure :-

Switchyard Support Structure (G.I. lattice structure) with fdn bolts including Nut & bolts

TEE Clamp for wolf

ACSR Wolf Conductor

33 kV Disc Insulator- Polymer 70 KN

Hardware fittings with Tension Clamp for wolf

UPG Clamp for wolf

33KV Post Insulator with accessories

Control Cable

2.5 Sqmm 19 core Control Cable

2.5 Sqmm 7 core Control Cable

2.5 Sqmm 4 core Control Cable

2.5 Sqmm 2 core Control Cable

Power Cable

10 Sqmm 1 core PVC Copper Cable

LT XLPE Cable 1-core 120 Sq.mm.

11 kV XLPE Cable 1-core 240 Sq.mm.

11 KV XLPE cable 1 core, 185 sqmm

11 kV XLPE Cable 1-core 240 Sq.mm. Termination Kit (Indoor)

11 KV XLPE cable 1 core, 185 Sqmm Termination Kit (Indoor)

11 kV XLPE Cable 1-core 240 Sq.mm. Termination Kit (Outdoor)

11 KV XLPE cable 1 core, 185 Sqmm Termination Kit (Outdoor)

LT PVC Cable two core 25 sq mm (Aluminium)

Bi-metallic lug (assorted)

Evacuation of 11kV power: (Considering 6 feeder)

Galvanized S.T. poles, Sp-60, 12 m

11 kV GO-AB Switch , channel base, 400A (for 11 KV O/G Fdrs )

Channel cross arm, 75x40x4.8x2800mm

11 kV Polymer Disc Insulator 70 KN

Hardware fittings with tension clamp for Raccoon

11 kV pin insulators Polymer.

G.I Jam clamp 12 M top

G.I Pole clamp 12 M top

G.I Pole clamp 12M middle

G.I Pole clamp 12 bottom

HT stay Set

GI Through bolt 5/8x10' inch

G.I. bolt 5/8x4' inch

G.I Pipe for 11 KV Cables riser on poles (75 mm Dia)

11 KV lightning Arrestor (9 kV, 10 kA) line type with GI Structure (for O/G feeders)

Mandatory spare parts and Other Items :

3 kg Co2 Fire Extinguisher + Sand Bucket

Furniture and equipment for Substation Control Rooms (Annexure FR)

Mandatory spare parts & tools for substations (Annexure MS - List 1)

Switchyard Earthing and Other Items :

Earthmat Materials as per (Annexure ES)

Safety Insulation mat for indoor 11 kv Switchgear Panels 1m width

Other items for completion of the works.

New 33 KV Line (0.6Ckm)

Galvanised pole 12 M (SP 60) 410

G.I. Channel 100x50x6x3050 mm

HT Stay set compete

33 KV Bracing set (D/Tier)

G.I Pole clamp 12 m (Top)

G.I Pole clamp 12 m (Middle)

G.I Pole clamp 12 m (Bottom)

G.I Jam clamp 12 m (Top)

G.I Jam clamp 12 m ( Middle)

G.I Stay clamp 12 m (Bottom)

GI Through bolts 5/8" x 12"

G.I Nut & Bolt 5/8 x 4"

33 KV Polymer Pin insulator

ACSR Wolf Conductor

Polymer Disc Insulator 70 KN

Hardware fittings for Wolf

MVCC-AL59 ACS-148.00 Sqmm

Jointing Kit for MVCC along with all accessories complete for 1 Km

HT Guy Insulator 88 KN

GI Stay wire 7/10 SWG

1 -Metre G.I. Earthing Pipe 40mm,

33 KV lighting spikes

Cement for grouting of pole & stay set

Danger Plate

Anti -climbing device

Cradle guard cross arm for DP 33 KV (65 X 65 X6 X 4320) along with clamp set

G.I Wire 8 SWG for guarding and grounding

G.I Wire 6 SWG for guarding and grounding

Sundries ( drilling of holes, welding of channel etc)

New 11 KV Line (12.40 Ckm)

Galvanized pole STP-9.5 mtr SP- 39- 410

G.I Channel cross arm 75×40×4.8×2280 mm

G.I Channel cross arm 75×40×4.8×1200 mm

G.I Channel top bracket 75×75 * 40 *4.8 * 310 mm

11 KV Z- Type bracing set (50x50x6 mm)

11 KV Disc insulators 45 KN

11 KV Pin Polymer

11 KV Lighting Spike

HT Stay set

HT Guy insulators 88 KN.

G.I. Stay wire 7/10 SWG

G.I. wire 8 SWG

G.I Pole clamp 9.5 mt (T)

G.I clamp 9.5 mt (M)

G.I clamp 9.5 mt (B)

G.I Stay clamp 9.5 mtr

G.I Jam clamp 9.5 mt(T)

G.I Nuts & Bolts (a) 5/8”,4"

G.I through bolts 5/8"x 12"

GI earthing pipe

ACSR Weasel Conductor

MVCC-AL59 ACS-52.88 Sqmm

Hard ware fittings for Weasel 2 bolted

Jointing Kit for MVCC along with all accessories complete for 1 Km

11 KV GOAB switch channel base type 400 Amps.

Barbed wire 12 swg.

Danger plate

Anti -climbing device

Cradle guard cross arm for DP 33 KV (65 X 65 X6 X 3800) along with clamp set

G.I Wire 8 SWG for guarding and grounding

G.I Wire 6 SWG for guarding and grounding

Cement for grouting of poles

Cement for grouting of stay

Sundries ( drilling of holes, welding of channel etc)

Item Wise BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

Design Services to be Incurred in Employer's Country Any other minor items not specifically mentioned hereunder are deemed to be included in 'other minor items for completion of the works' (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Survey, Revised Schedule of Quantities and design services for new substation subprojects

Item Wise BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

Civil Works to be Incurred in Employer's Country Any other minor items not specifically mentioned hereunder are deemed to be included in 'other minor items for completion of the works' (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Civil works for new 33/11 kV Substations

Construction of RCC Control room building as per specification including internal electrification, water supply and sanitary works, etc complete.(Annexure C-i)

Construction of Station Service Transformer Pad(Annexure C-ii)

Cable trench for Power/ Control cable (750x800 mm) inc. labour & materials (Annexure C-iii)

Cable trench for Power/Control cable (450x500 mm) inc. labour & materials (Annexure C-iv)

Foundation for Tower Structure (Annexure C-v)

Foundation for 33 KV VCB (Annexure C-vi)

Foundation for 33 kV/ 110 volt PT (Annexure C-vii)

Foundation for 33 KV CT (Annexure C-viii)

Foundation for 33 kV 10 KA LA (Annexure C-ix)

Foundation for 33 KV Isolator (Annexure C-x)

Switchyard Chain Links fencing for 33/11 kV Substation ( including gate) (Annexure C-xi)

Switchyard PCC & Gravelling (Annexure C-xii)

Power Transformer Pad (Annexure C-xiii)

Foundation of HG fuse (Annexure-C-xiv).

SITE LEVELLING ( Annexure C-xv)

Fire wall between transformers (Annexure C-xvi)

Water Supply Facility including Storage tank, pump, supply & laying of GI pipes (Annexure C-xvii)

Approach road (Annexure C-xviii)

Construction of RR Stone Masonry (Annexure C-xix)

Construction of drainage system in the Switchyard (Annexure C-xxi)

Foundation for 11 kV 9KA LA (Annexure C-ix)

Foundation for 11 kV Isolator (Annexure C-x)

Boundary fencing with grill on top including gate (Annexure C-xxiv)

Geo-technical Investigations as per TS

Constructionof 04 Unit Barrack(Annexure C-xxv)

Item Wise BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

Erection to be Incurred in Employer's Country Any other minor items not specifically mentioned hereunder are deemed to be included in 'other minor items for completion of the works' (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Sch-A1 : Erection of facilities including testing and commissioning for new 33/11 kV Substations

33 kV Lighting Arrester with structures and terminal connectors complete.

30 KV 10 KA , LA Class II Station Type

33 kV Isolators with structures, terminal connectors and earth switch, 800A complete.

33 kV Isolators with structures, terminal connectors, but without earth switch,800A complete.

33kV current transformer for feeders with structures and terminal connectors, 400-200/5/5A, complete.

33kV current transformer for Power Transformers with structures and terminal connectors, 100-50/5/5A, complete.

33kV potential transformer with structures and terminal connectors complete.

33kV, 1250 A, 25kA outdoor VCB with structures, terminal connectors (including DC supply, control wiring etc.) complete.

33 kV C&R panel for feeders including control cabling complete.

33 kV C&R panel for Power Transformers including control cabling complete.

33/11kV, 2.5 MVA Power Transformer with OLTC complete

11kV VCB panel, indoor for incoming & outgoing feeders and bus coupler , safety insulation mat etc. complete.

33/0.433 kV, 100kVA transformer including installation of DTR cubicle and all accessories & cables complete.

33 kv HG Fuse with structures and terminal connectors complete.

11Kv isolator 800 A with earth Blade/switch with structures and terminal connectors complete.

11 kv LA (station type) with structures and terminal connectors complete.

Erection of G.I Lattice structure for substation switchyard including all materials and PCC Grouting

Fitting and fixing and stringing of 33kV busbar with fitting of disc/post insulators, all types of hardwares, all types of clamps complete.

Earthmat for switchyard including all accessories and joints, complete

Laying, drawing, termination of 11kV & LT power and control cables

11kV XLPE cable, 1 core, 240Sq.mm.

11kV XLPE cable, 1 core, 185 Sq.mm.

LT XPLE cable, 1 core, 120 Sq.mm

LT 10 Sqmm 1 core PVC Copper Cable

LT PVC Cable two core 25 sq mm (Aluminium)

2.5 Sqmm 19 core Control Cable

2.5 Sqmm 7 core Control Cable

2.5 Sqmm 4 core Control Cable

2.5 Sqmm 2core Control Cable

Erection, testing and commissioning of Battery Bank & Panels

Battery Bank (150 AH, 110 V)

Battery Charger with DCDB

LT ACDB with 1 incomer + 6 O/G + 3 phase Static CT Operated Energy meter

Erection, testing and commissioning of Switchyard Area Lighting including cabling

G.I.-Hexagonal- 8 meter pole for Street Light along with mast arm rise and foundation.

LT AC Panel for switchyard Lighting with light sensor / solenoid switch

Floodlights including all wiring, G.I conduits and accessories

Evacuation of 11kV power:

Erection of 12 m Galvanized S.T. poles including excavation of pole pits, stone pad and concreting

Erection of HT Stay including excavation of pits and concreting

Outgoing feeder termination structure with installation of all accessories including channel cross arms, insulators, GOAB switch, earthing, clamps, GI pipes, cable riser and terminations

New 33 KV Line (0.6Ckm)

Excavation of Pole Pits:-

i) In hard rock.

ii) In soft rock mixed with earth.

iii) In normal soil.

Erection and Grouting of poles- 14.5 Meter: The work comprises of erection of pole including base plate & grouting from the base up to a height of 150 mm above the ground level with a slope at the top along with a top cap (all the materials including boulder, stone chips & sand will be supplied by the contractor).Concrete prop 1:3:6.

Erection of HT- stay set: The work of digging of stay pit ,grouting of stay set and fitting and fixing of stay wire to the pole with clamp including fitting of guy insulator and all other associated work of stay including loading carrying,unloading,dragging etc.to site)

Earthing: Earthing of pole location with G.I pipe including digging of earth pit and filling the pit with charcoal,salt and earth and making necessary connection complete.

Fitting and fixing of Bracing set complete: Bracing set (S/Tier)

Fitting and Fixing of channel

Paying out Stringing of conductor (A.C.S.R/MVCC): Paying out and stringing of conductor fixing with disc insulator string and over the pin insulator including binding and jumpering wherever necessary complete.Safety measures is to be taken towards damage of conductor while paying out. A. For H.T Line

Fitting anf fixing of 33 KV Cradle Guard Complete

Fitting of anti -climbing device: Fitting and fixing of barbed wire for anti -climbing to the pole from a height of 1500 mm from the groung level to a height of 3000 mm complete.

Fitting & Fixing of Danger Plate

New 11 KV Line (12.40 Ckm)

ERECTION WORKS:

Excavation of Pole Pits:-

i) In hard rock.

ii) In soft rock mixed with earth.

iii) In normal soil.

Erection and Grouting of poles: The work comprises of erection of pole including base plate & grouting from the base up to a height of 150 mm above the ground level with a slope at the top along with a top cap (all the materials including boulder, stone chips & sand will be supplied by the contractor).Concrete prop 1:3:6.

9.50 m long N/D

Erection of HT- stay set: The work of digging of stay pit ,grouting of stay set and fitting and fixing of stay wire to the pole with clamp including fitting of guy insulator and all other associated work of stay including loading carrying,unloading,dragging etc.to site)

Earthing: Earthing of pole location with G.I pipe including digging of earth pit and filling the pit with charcoal,salt and earth and making necessary connection complete.[Single&Double pole location. ]

Fitting and fixing of Bracing set complete - Z type bracing set

Fitting and fixing of channel & cross arm along with accessories.

Paying out Stringing of conductor (A.C.S.R.) Raccoon/MVCC Paying out and stringing of conductor fixing with disc insulator string and over the pin insulator including binding and jumpering wherever necessary complete.Safety measures is to be taken towards damage of conductor while paying out.

Fitting anf fixing of 33 KV Cradle Guard Complete

Fitting and fixing of Danger plate as directed.

Fitting of anti -climbing device: Fitting and fixing of barbed wire for anti -climbing to the pole from a height of 1500 mm from the groung level to a height of 3000 mm complete.

Item Wise BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

CONSTRUCTION OF CONTROL ROOM FOR 33/11 KV SUBSTATION Any other minor items not specifically mentioned hereunder are deemed to be included in 'other minor items for completion of the works' (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Hard soil or soil mixed with moorun, gravel, boulder upto one-man size (above 0.03 cum each)

Providing 100 mm thick soling with approved quality of stones including carriage, ramming, consolidating and filling the interstices with stone aggregates complete.

Providing and laying cement concrete in proportion 1:3:6 corresponding to M100 (1-cement, 3-sand, 6-stone aggregates of 40 mm and down graded) including necessary curing complete excluding shuttering.(b) Cement procured by contractor

Providing coursed random rubble stone masonry in foundation and plinth with unsized stone (mawthup) bonded with cement mortar of proportion 1:6 (1-cement, 6-sand) including curing complete. (Average size is not less than 20 cm x 20 cm x 25 cm)

Providing tor steel reinforcement in RCC work including cutting, bending, cranking and tying in position with binding wire, 20 gauge, as shown in drawings, complete upto floor two level.

Providing mild steel reinforcements for RCC work including cutting, bending, cranking and tying in position with binding wire, 20 gauge, as shown in drawings complete upto floor two level.

Providing shuttering including centering for flat surface such as slabs, shelves, chajja and for vertical faces such as columns, walls, ends of beams etc with dressed plank not less than 25 cm thick firmly fixed etc complete as directed (applicable upto 3.30 m height)

Providing and laying cement concrete in proportion 1:2:4 corresponding to M150 (1-cement, 2 sand, 4-stone aggregates of 20mm and down graded) including necessary curing complete, excluding shuttering, in foundation and below plinth and in septic tank, inspection pits etc, complete.

Providing and laying cement concrete in proportion 1:2:4 corresponding to M150 (1-cement, 2 sand, 4-stone aggregates of 20mm and down graded) in super structure including curing complete (excluding shuttering).(i) Upto first floor level.(b) Cement procured by contractor

Earthwork in filling with available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm thick including breaking clods consolidating each layer by ramming and watering, lead upto 50m and lift upto 1.50m.

Sand filling in plinth in layers not exceeding 15 cm including breaking of clods, consolidating by ramming and watering complete as directed. (Maximum depth 45 cm).

Providing cement concrete floor 65 mm thick in proportion 1:3:6 (1-cement, 3-sand and 6-stone aggregates) to the proper level and slope including ramming and curing complete as directed.

Providing cement concrete topping proportion is 1:1:2 corresponding to M250 (1-cement, 1-sand and 2-stone chips of 12mm and down graded) to the proper level and slope including curing and trowel finished with a floating coat of neat cement slurry @ 2.75kg of cement per sq.m. for floor complete as directed (20mm thick).(ii) Cement procured by contractor

Providing first class brick in required thickness in cement mortar 1:6 (1-cement and 6-sand) including curing complete as directed. (b) For walling (super-structure)(ii) Thickness..12.50cm

Providing first class brick in required thickness in cement mortar 1:6 (1-cement and 6-sand) including curing complete as directed. (a) Below Plinth Level (ii) Thickness 250 mm

Providing steel works in tees, flats, angles and channels including cutting, drilling holes, hoisting and framing in position complete. 50x50x6mm Angles for cable supports and for supporting chaqured plate @ 0.5M c/c

Providing shequred steel plates 8mm thick for covering the cable trenches including cutting, drilling holes, hoisting and framing in position complete. (As per market rates)

Providing and fixing anodised aluminium doors, windows and ventilators of standard section without horiontal glazing bars, (manufactured to relevant IS specifications & minimum anodic coating of grade AC-15 ) with lugs 16mm X 3.15 mm and 10 cm long, embedded in cement concrete blocks 15 cm X 10 cm X 10 cm size of 1:3:6 (1- cement : 3 -sand: 6 stone aggregates)or with wooden plugs and screws or rawl plugs and screws or with expansion hold fasteners including projecting hinges, handles locking arangements etc complete. Alluminium section shall be smooth straight,mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling all complete as per architectural drawings and directons of the Engineer- in-charge. (b) Double leaf doors

Providing and fixing anodised aluminium doors, windows and ventilators of standard section without horiontal glazing bars, (manufactured to relevant IS specifications & minimum anodic coating of grade AC-15 ) with lugs 16mm X 3.15 mm and 10 cm long, embedded in cement concrete blocks 15 cm X 10 cm X 10 cm size of 1:3:6 (1- cement : 3 -sand: 6 stone aggregates)or with wooden plugs and screws or rawl plugs and screws or with expansion hold fasteners including projecting hinges, handles locking arangements etc complete. Alluminium section shall be smooth straight,mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling all complete as per architectural drawings and directons of the Engineer- in-charge. (c) Single leaf door

Providing and fixing anodised aluminium doors, windows and ventilators of standard section without horiontal glazing bars, (manufactured to relevant IS specifications & minimum anodic coating of grade AC-15 ) with lugs 16mm X 3.15 mm and 10 cm long, embedded in cement concrete blocks 15 cm X 10 cm X 10 cm size of 1:3:6 (1- cement : 3 -sand: 6 stone aggregates)or with wooden plugs and screws or rawl plugs and screws or with expansion hold fasteners including projecting hinges, handles locking arangements etc complete. Alluminium section shall be smooth straight,mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling all complete as per architectural drawings and directons of the Engineer- in-charge. (e) Opennable windows/ventilators

Providing and fixing glass panes, ordinary quality, in anodised aluminium doors, windows and ventilators with Aluminium snap beading, PVC/neoprene gasket etc. complete as per the architectual drawing and the direction of the Engineer in charge (Cost of the aluminium snap beading shall be paid in the basic item)

Providing MS ornament grills of approved designed, joints continously welded, withMS flat iron and bars for windows and railing etc fitted and fixed with necessary screws or lugs complete with a priming coat of red lead paint. (in ground floor).

Providing 12mm thick cement plaster including cleaning the surface and curing complete as directed.

Providing and fixing on wall PVC rain water pipes including fitting the joints with plastic compound fixed with MS clamp screwed on wooden plugs including cost of cutting holes and making good the wall etc. complete.

Providing and fixing in position Indian pattern W/cincluding traps etc. foot rest etc.complete with all necessary fittings including and making good the walls and walls wherever required and as directed by the Engineer-in -charge. ( b ). 500mm.

Providing and fixing in position low down flushing cistern etc (porcelain)complete with all necessary fittings including cutting and making good the walls and floors wherever required andand as directed by the Engineer-in-charge. (c).Plastic (coloured)

Providing and fixing in position wash hand basin etc. complete with all necessary fittings including cutting and making good the walls and floors wherever required and as directed by the Engineer-in -charge.

Providing and fixing bathroom mirror complete as directed by the Engineer-in -charge. (c ). Superior quality (AGMECO-Gold)

Providing and fixing towel rail complete as directed by the Engineer-in -charge. (b ). Superior quality (AGMECO-Gold)

Providing pipes 15mm dia including neccessary sockets, bends, jamnuts, elbows, tees etc, complete as directed in bath room

Providing pipes 15mm dia including neccessary sockets, bends, jamnuts, elbows, tees etc, complete as directed from plinth to water supply tank

Supplying, fitting and fixing CP bathroom fitting 12mm dia of approved board (AGMEGO Premuim Spectra and the like) complete as directed. Bibcock Short Body

Supplying, fitting and fixing CP bathroom fitting 12mm dia of approved board (AGMEGO Premuim Spectra and the like) complete as directed. Stop Cock M/F thread

Supplying, fitting and fixing PVC Syntex tank including fitting and fixing the inlets and outlets pipes as directed complete.

Providing 100mm dia PVC pipe in wall incl;uding filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1-cement, 2-sand) fixed with MS clamps embedded in cement concrete blocks 10cm x 10cm x 10cm of 1:2:4 (1-cement, 2-sand, 4-stone aggregates) including cutting holes and making good the wall etc complete as directed.

Providing and fixing PVC pipe specials including fixing with cement jute admixture complete as directed. 100 mm dia Plain Bend

Providing and fixing PVC pipe specials including fixing with cement jute admixture complete as directed. 100 mm dia Sockets

Providing and fixing PVC pipe specials including fixing with cement jute admixture complete as directed. Door Bend 100 mm dia

Providing and fixing PVC pipe specials including fixing with cement jute admixture complete as directed. Junction 50 mm x 100 mm

Providing and fixing PVC pipe specials including fixing with cement jute admixture complete as directed. Cowl

Providing and fixing 50mm dia PVC pipes including sealing the joints with cement jute admixture complete as directed.

Providing 600mm x 600mm x 600mm inspection pits (internal dimensions) with 150mm thick cement concrete base in proportion 1:3:6 (1-cement, 3-sand, 6-stone aggregates) 150mm thick cement concrete side walls in proportion 1:3:6, 75 mm thick RCC cover slab in proportion 1:2:4, including moulding, channelling and plastering with 12mm thick cement plaster in proportion 1:3 (1-cement, 3-sand) properly finished complete as directed.

Providing filter beds or soak pits with sand stone boulder or laterite boulder 75mm and 150mm, including excavation of foundation and supplying & fitting 100 mm dia AC pipes (disjointed) including dressing the surface as shown in the approved drawings complete as directed.

Supplying including carriage within 8km and laying in trenches including fitting, fixing, G.I. pipes complete with as G.I. fitting such as Socket, bend Elbow, Cross, Union socket, Threaded nipple, reducing socket, reducingt tees including cutting threading etc. with all jointing materials complete as directed excluding trenching of rate. The fitting will be paid extra except socket joints.(Medium quality pipes). 40 mm dia

Supplying, fitting, fixing ISI marked Gun Metal full way aheel valve (Superior quality) including jointing materials and carriage of materials within3km all complete as directed. 40 mm dia

Supplying, fitting, fixing G.I. Reducing Tee as per approved quality of the department including cutting and threading the pipes and jointing materials and carriage of materials within 8km all complete as directed. (Medium) 40 mm x 15 mm dia

Providing and fixing sliding bolts as directed. Aluminium 250 mmx16 mm dia

Providing and fixing Iron/Alluminium/Brass handles with screws complete as directed. Aluminium 100 mm long

Providing and fixing on wall PVC rain water pipes including fitting the joints with plastic compound fixed with MS clamp screwed on wooden plugs including cost of cutting holes and making good the wall etc complete. 100 mm dia pipe

Providing glazed ceramic floor tiles (somany / Johnson) of approved shade 7.3 mm thick in flooring, treads of steps, landings, laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand) finished with flush pointing as directed.

Supplying, fitting and fixing white glazed tiles (Pilkinton make) on walls over a layer of 12 mm thick cement plaster of proportion 1:2 (1-cement: 2-coarse sand) including cutting, sizing the tiles to required size after rubbing the edges with carborandom stone and fixing the tiles with a lining of cement paste including cleaning the surface complete as directed.

Distempering with acrylic washable distemper of approved shade to give an even shade including cleaning etc of the surface on new works (including cost of priming coat). (b) Two coats.

Primer (1) Coats, Wall putty Painting two (2) coats with WEATHER SHIELD ACRYLIC EXTERIOR WALL FINISH of approved shade including surface preparation as well as scaffholding etc. complete as directed.(a) New works.

Providing drain (open surface) with bed and wall thickness of 100mm finished with cement plaster 1:3(1 cement,3 sand)with floting coat of neat cment complete as directed. (2) 250 mm x 250 mm. (a) C.C. 1:3:6

Providing internal wiring including supply of fittings and assesories including sub-distribution boards, lighting points, switches, socket outlets fans & exhaust fans as required andas per approved design complete.

Item Wise BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

Annexure C-XXV- CONSTRUCTION OF BARRACKS FOR SHIFT STAFF (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Earth work in excavation in foundation trenches, including dressing of sides and ramming of the bottom including stacking of serviceable stones, etc. complete as directed.

Providing and laying cement concrete in prop. 1:3:6 corresponding to M100 including necessary curing complete excluding shuttering.

Providing tor steel reinforcement for R.C.C. work including cutting bending, cranking and tying in position with binding wire, 20 guage, as shown in drawings complete upto floor two level.

Providing mild steel reinforcement for R.C.C. work including cutting bending, cranking and tying in position with binding wire, 20 guage, as shown in drawings complete upto floor two level.

Providing shuttering including centering for flat surface such as slabs, shelves, chaja etc. with dressed plank not less than 25cm thick etc. completed as directed.

Providing and lying c.c in prop. 1:2:4 corresponding to M150 including necessary curing complete excluding shuttering, in foundation and below plinth and in septic tank, inspection pits etc, complete.

Providing laying cement concrete in prop 1:2:4 corresponding to M150 in super structure including necessary curing complete (excluding shuttering).

Providing 1st class brick in required thickness in cement mortar 1:6 including curing complete as directed.(a) Wall below Plinth

Providing 1st class brick in required thickness in cement mortar 1:6 including curing complete as directed.(a) For walling superstructure

Providing 12mm thick cement plaster including cleaning the surface and curing complete as directed.

Providing 20mm thick cement plaster skirting with morter 1:3, finished with floating coast of neat cement including of junction with floor as directed complete.

Earth in filling with available excavated earth in trenches, plinth, sides of foundation etc. in layer not exceeding 20cm thick including breaking clods, consolidating each layer by ramming and watering, lead upto 50m & lift upto 1.50m

Providing 100mm thick soling with approved stone including carriage, ramming consolidating etc complete.

Providing cement concrete floor 65mm thick in prop 1:3:6 to the proper level and slope including ramming and curing complete as directed.

Providing cement concrete floor topping in prop 1:1:2 corresponding to M250 to the proper level and slope inluding curing and trowel finished with floating coat of neat cement slurry @ 2.75 kg of cement per sq.m for floor complete as directed.

Providing undressed wood work in trusses, purlins, rafters, post plates, wall plates, and the like, framed, hosted and fixed in position with nails, spikes, nuts and bolts etc.

Providing dressed wood works in frames of doors and other similar works, frame and fitted in position with bnails, nuts and bolts etc. as required and directed complete with (a) Sal wood

Providing and fixing 38mm thick fully glazed shutter for doors and windows including iron hinges, iron fittings, etc. as specified complete with (b) Redpine wood/ Local wood

Providing and fixing flushed doors 38mm thick made up of 3mm plywood on both side fixed to wooden frame including iron hinges, iron fittings, tower bolts, screw etc. as specified complete with (b) Redpine wood/ Local wood

Providing and fixing glass panes, ordinary quality embeded in putty and fixed with nails etc complete. (b) 4mm thick

Providing & fixing plain GI sheet lining with 1st timber beading (50mmx12mm) on wooden frame, both ways along with necessary screws complete (Frame to be paid separately)

Providing and fixing corrugated gavanized iron sheet roofing fixed with galvanized iron J&L hooks, bolts and nuts, 8mm diameter with bitument and GI limpet washer or with GI limpet washer filled with while lead complete excluding the coast of purlins, rafters and trusses.

Providing ridges 450mm (overall width) in plain GI sheet lappage, with galvanised iron J&L hooks coach screw & washers complete

Distepering with acrylic wasable distemper of approved shade to give an even shade including cleaning etc of the surface on new works (including cost of priming coat)

Providing and fixing 25mm thick local wood board (plain) of 200mm - 250mm with nails etc. complete

Applying ready mixed priming coats of approved brand and quality as per specification complete as directed.

Painting with best quality synthetic enamel with approved make and brand including smoothering the surface by sand papering etc. and using approved putty on the surface, if necessary complete as directed.

Providing and fixing 100mm dia soil pipes (1.80m each) i/c cement mortar chaulk joints, laid to the proper level excavation the foundation, filling in and dressing complete.(b) PVC

Providing and fixing vent pipes (50mm) with cement mortar caulk points from the horn bends towards the roof i/c necessary arrangements against leakage in the roof, clamps and brackets complete. (b) PVC

Supplying and fixing A.C. specials including cement mortar chaulk joints complete as directed. (b) 100mmx50mm AC Horn bend

Supplying and fixing A.C. specials including cement mortar chaulk joints complete as directed. (c) 100mmx100mm Door bend

Supplying and fixing A.C. specials including cement mortar chaulk joints complete as directed. (d) 100mm loose Socket bend

Supplying and fixing A.C. specials including cement mortar chaulk joints complete as directed. (e) 100mm x 100mm Equal junction Tee

Supplying and fixing A.C. specials including cement mortar chaulk joints complete as directed. (g) 50mm AC cowl

Providing 450mm x 450mm x 450mm inspection pits with 100mm thick c.c. base in prop.1:3:6, 100mm thick c.c. side walls in prop. 1:3:6, properly finished complete.

Providing filter beds or soakpits with sand stone boulder, 75mm and 150mm, including excation of foundation and supplying & fitting 100mm dia AC pipes (disjointed) including dressing the surface as shown in the approved drawing complete as directed.

Providing and fixing in position Indian pattern w/c including traps etc. and foot rest etc. complete with all necessary fittings including cutting and making good the walls and foot wherever required and as directed by the Engineer in charge (b) 500 mm

Providing internal wiring including supply of fittings and assesories including distribution board, lighting points, switches, socket outlets as required, 4 nos. fans & 2 nos. exhaust fans complete.

Item Wise BoQ

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

Abstract (Grand Summary) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

BoQ1 : [Supply]

BoQ 2 : [Design]

BoQ 3: [Civil Works]

BoQ 4: [Erection]