ADDN/ALTN IN TOILET AT GUEST ROOM RAJGIR NEAR BLDG NO P17 AT HQ J AND B SUB AREA OFFRS MESS ADDN ALTN TO BOUNDARY WALL AT SOUTH PORTION OF POLO SQUARE OFFRS MD ACCN PROVN OF FALSE CEILING WALL PANELLING AND ALLIED WORKS AT JOIR CONFERENCE HALL AT HQ

Amount

Dismantling of floor, walls tiles including bedding but backing and rubbish off permises all as specified.

M & L for 450x300 x7 mm to 350x275x7 mm thick glazed ceramic tiles (Digital pattern) including highlighter colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile exceeding 0.36 sqm but not exc. 0.42sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15mm thick screed bedding in CM 1:6 complete all as specified and directed.

Taking down cement plaster from brick wall/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M & L Rendring 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note:- Liquid WPC will be measured and paid separately.

Supply only water proofing compound (liquid), ISI marked.

M & L for 100 mm thick cement concrete 1:2:4 type B-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor finished even & fair complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (40mm graded stone agg) in fdn, sub base, mass concrete concrete etc. complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M & L for Hardcore of broken bricks of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M&L reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in foundation, footing, foundation beams, plinth beams, bases for columns, pedestal, under reamed piles, mass concrete, etc complete.

Use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto 10mm as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed..

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed

~Ditto~ all as per item Ser No 17.00 above but except bricks complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified

Taking down chowkats or frames exc 1.5 Sqm but n.exc. 4 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

S&F for Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125X60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood complete all as specified and directed.

S&F factory made 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut metered bead and shutters as specified in SSR Part I, complete all as specified and directed

S&F for powder coated aluminium window three track sliding type with frames including 5mm thick tinted glass, stainless steel wire cloath 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with standard rubber gasket, aluminium beadings and joining cleat for fixing including locking devices complete all as specified. Make : Jindal & Hindalco.

S & F of steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concret or brick surrounds, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing for fixing new panes complete all as specified and directed.

S&F 4 mm thick figured sheet glass pin head type fixed in aluminium ventiliators with necessary rubber and powder coated aluminium snap beading complete all as specified. Make : Modi Float, Saint Gobin

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple complete all as specified.

Demoliton of cement concrete in ground floor paving n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate /plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

Supply only 38mm wide glass dividing strips, 3mm thick complete all as specified and directed..

M&L for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of primer over and including 3 mm thick Birla/ JK wall putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L for preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide primer, complete all as specified.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exc 10 CM girth all as specified and directred

Taking down or up 15 mm bore steel tubing and connections, including cleaning for re-fixing complete all as specified and directed.

Taking down or up 20 mm bore steel tubing and connections, including cleaning for re-fixing complete all as specified and directed.

S&F 15 mm bore GI Tubing medium grade with GI fitting (ISI marked) fittings fixed to walls, ceilings or laying in floors in comp all as spd and directed

S&F 20 mm bore GI Tubing medium grade with GI fitting (ISI marked) fittings fixed to walls, ceilings or laying in floors in comp all as spd and directed

Re-fixing old 15 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. Note: - Old steel water tubing obtained from dismantling shall be used under this item.

Re-fixing old 20 mm bore old steel water tubing and connection in new or old position (wall, ceiling, floors etc) including cleaning of old pipes and provision of new GI fittings as required complete all as specified and directed. Note: - Old steel water tubing obtained from dismantling shall be used under this item.

S & F 150 mm long Aluminium anodised barrel tower bolts of extruded section.

S & F 125 mm long Aluminium handles of extruded section, fabricated type and fixed

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type and fixing clips of sheet, cast or extruded section or cast aluminium alloy etc all complete all as specified and as directed..

S&F 100 mm size butt hinges extruded aliminium alloy with galvanised MS hinge pin complete all as specified and as directed.

Cutting holes into or through brick walls built in cement mortar and making good the same in cement concrete 1:2:4 type B-0 or cement mortar 1:3 as required, superficial area of cutting not exc. 150 Sqcm complete all as specified and directed

Dismantling of corrugated or semi corrugated Asbestos Cement (AC) sheets in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410W Grade E 250 complete all as specified and as directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing complete all as specified and directed.

M&L Felling of tree n exc. 30 cm girth including cutting of trunk, and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50 m andclearing site ®complete all as specified as directed.

M&L for vitrified heavy duty (dura stone) tiles 300x300x9 to 10 mm thick in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, & kitchen cupboard shutters with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F glass shelf 600mm (with brass brackets) including fixing arrangements complete. Make- Jaquar Cat part No CPA-1171or equivalent

M&L for two coats of Apex weather paint on old plastered surfaces over a coat of primer including preparation of surface complete all as specified and as directed by Engr-in-Charge.

Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs all as spd.

S&F 1000 Ltrs capacity rotational moulded polythene water storage tanks in three layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

S&F in repair 15 mm dia nipple suitable for HDPE water tank (min weight 38 gms) complete all as specified and directed

S&F in repair 20 mm dia nipple suitable for HDPE water tank (min weight 45gms) complete all as specified and directed

S&F in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high desity plastic ball srewed for iron pipe and fixed (minium weight 15mm-142gms) complete all as specified and directed

S&F in repair Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc complete all as specified and directed .

S&F in repair Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including mild steel brackets with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed.

S&F PVC (SWR) 75 mm bore floor trap/Nahani with grating including jointing with solvent cement complete all as specified. Make : Finolex/Supreme

S&F in repair 15 mm pillar tap cast copper alloy fancy type with capastan head chromium plated screwed down high pressure with or without lettered “HOT or “COLD” with long screwed shanks and fly nuts, screwed for iron pipe.

S & F in repair bib tap 15mm chromium plated with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed by the Engineer-in-Charge. Cat No CON47KN or equivalent in Prayag.

S&F in repair 15 mm bore concealed type stop valves, cast copper alloy, screwed down, high pressure, with capstan head, fancy type, chromium plated, with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F PVC connection 15 mm size with 2 No CP check nut & its washer of length 600 mm complete all as specified and as directed.

S&F CP brass tubular towel rail 20mm dia 600 mm long fixed with CP brass screw and wooden/plastic cleats complete all as specified and as directed.

S&F in repair stainless steel designer curtain rod fancy type curten rod 20 mm dia as approved complete..

S&F stainless steel Brackets with knobs fancy type for stainless steel designer curtain rod 20 mm dia as approved complete all as specified and directed.

S&F in repair brass chromium plated central hole basin mixer with round spout without popup waste system with 10 mm dia, 450 mm long braided hoses complete all as specified and directed. Make : Jaguar COP - 169BPM or equivalent in Prayag Polymer Pvt Ltd.

S&F in repair cast copper alloy, chromium plated wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete all as specified and directed. Make : Jaguar COP281PM or equivalent in Prayag Polymer Pvt Ltd.

S&F in repair brass chromium plated health faucet for EWC with 15 mm dia PVC pipe 1.00 m long including nut/washer complete all as specified and directed. Jaguar Cat No ALD573 or equivalent in Prayag Polymer Pvt Ltd.

M&L for plain Cement concrete 1:2:4 Type B1 using 20 mm graded aggregate as in roof curb r mud stops, coping benching and surface channel/padding and for similar work including necessary formwork complete all as specified and directed.

Extra for forming fair finished drain or channel using extra cement including forms moulded etc complete all as specified and directed for the following inner girth of drain up to 30 cm inner girth

M&L for precast RCC 1:2:4 Type B-1(using 20mm graded stone aggregate) as in manholes covers including form work etc set in CM 1:6 complete all as specified and directed.

Taking down eaves gutters and rain water pipes bore upto 150 mm bore ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks etc complete all as specified and directed.

Supply and fixing PVC (SWR) 110mm bore pipe single socketed, in any length with ring joints sealed with approved adhesive and fixed on wall,or in floor complete all as specified and directed.

Supply and fixing PVC (SWR) 75mm bore pipe single socketed, in any length with ring joints sealed with approved adhesive and fixed on wall,or in floor complete all as specified and directed.

S & F of 100 mm dia grating doom of PTMT (minimum weight 25 gram) complete all as specified and directed.

S&F PVC (SWR) 110 mm bore bends of any radius with door/without door.

S&F PVC (SWR) 110 mm PVC junction single (Single 'T') equal or unequal complete.

S&F in repairs, vitreous china squatting pan Orissa pattern size 580mmx440mm white with integral foot rests (exluding flushing cistern and flush pipe) including lime /cement concrete bedding all as specified and directed by Engineer-in-Charge. Make Parryware(Superfine), Cera (Ist Quality), Hindware

S&F white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl mild steel braded bracket and flush pipe fixed to wall , complete all as specified and directed.

M & L for coloured Non Skid ceramic tiles 7 to 8 mm thick(square/ rectangular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down APP roofing sheet/Terrazo/Tiles of any description incl mud/cement plaster etc and cleaning the top surface, washing down etc. Prepared to receive water proofing treatment , incl filing of cracks, groves etc in neat cement slurry complete all as spd.

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as specified and directed,

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete all as specified and directed. NOTE:- 1. The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed. 2. The work shall be carried out by authorised applicator of Manufacturer.

S&F in repair 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed

S&F in repairs continuous (Piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type cast copper alloy chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Cat No : COP 41PM or equivalent in Prayag Polymer Pvt Ltd.

S&F glass shelf wall corner size 300 mm with all fittings/brackets complete all as specified and as directed by Engineer-in-Charge. Make : Jaquar/Cera

S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed. Cat CPA-1135 or equivalent in Prayag.

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed.

S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed

S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed

M & L for 8 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed.

S&F in repair brass chromium plated overhead shower rose swivel type125 mm with CP arms 300 mm long complete all as specified and directed.

M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded stone aggregate as in floors including finishing the surface rough for laying kota stone / tiles complete all as specified and directed

S&F vitreous china wall hung Wash Hand Basin of Size: 590x490x185 mm with full pedastal, including waste pipe and waste coupling complete all as specified and directed. Make Jaquar Cat Part No LYS-WHT-38801 or equivalent in Prayag Polymer Pvt Ltd.

S & F Vitreous china wash down water closet pan ( pedestal pattern ) Rimless Bowl With Cistern For Coupled WC With UF Soft Close Slim Seat Cover, Hinges, Conversion Bend, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 380x670x765 mm, S Trap- 300 mm (With Conversion Bend) complete all as specified and directed Make : Jaquar Cat part No FSS-WHT-29853S300UFSM or equivalent in Prayag Polymer Pvt Ltd.

S&F Angular Stop Cock with Wall Flange angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. Make Jaquar Cat Part No COP-057PM or equivalent in Prayag Polymer Pvt Ltd.

S&F Overhead Shower 120X120mm Square Shape Single Flow(Face Plate Stainless Steel & ABS Body in Chrome finish) with Rubit Cleaning System with CP arms 300 mm long complete all as specified and directed. Make- Jaquar Cat part No OHS-1667 or equivalent in Prayag Polymer Pvt Ltd.

S&F toilet Paper Holder with Flap Recessed Type (Stainless Steel) complete all as specified and directed. Make- Jaquar Cat part No AHS-1553 or equivalent in Prayag Polymer Pvt Ltd.

S&F Towel rack 600mm long with lower hangers complete all as specified and directed. Make- Jaquar Cat part No CPA-1181 or equivalent in Prayag.

S&F in repair of cabinet mirror, box type of size 19" x 21" of colour as approved fixed to wall complete all as specified and directed .

S&F CP towel ring round with round flange & iron CP brass screw and wooden/plastic cleats complete all as specified and as directed. Make : Jaquar CAN-1121BN or equivalent in Prayag polymer Pvt Ltd

M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in Floor/trenches complete.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L 15mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete.

Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M&L 15 mm thick cement plaster on other than fair faces of bricks work or concrete surfaces with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

S&F Mild steel works as in angle iron in fencing post /strut including cutting top to shape conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F in repair Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line wire to be measured).

S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S &F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. complete all as specified and directed.

S &F 8mm thick calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately)

Taking down carefully aluminium point wiring(any type)for one light point, fan point ,exhaust fan point, bell point, power point complete including all fittings such as switches, socket, pendents holder, ceiling rose, sketch fittings, tube light fittings, regulatores unscrewing the switch sockets, ceiling rose, regulators from boards/outlet boxes and making good the disturbed surfaces of wall/ ceiling and colour washing matching with the existing colour wash all as specified and directed by Engineer-in-Charge.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

Ditto- all as item No. 130 here-in-before but one 3 pin, 5amp socket out let on independent board complete all as specified and directed.

Ditto- all as item No. 130 here-in-before but one bell point control by one switch complete all as specified and directed.

Ditto -all as item No. 130 here-in before but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed.

M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 2.50 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 2.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed.

M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 4.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed. NOTE : Two runs of 6 Sqmm and one run of 4.0 Sqmm cable and PVC conduit shall be measured as a one unit length.

M&L for sub main wiring with PVC insulated 1100V grade FRLS single core multi stranded copper conductor cable of size 2x4 sqmm + 1x2.5sqmm as earth continuity cable passing through and including 25/20mm dia PVC conceal conduit all as specified and directed by Engr-in-Charge. Note - Two runs of 4sqmm including one run of 2.5 sqmm including PVC conduit 20mm shall be measured as unit length.

S & F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed.

S&F switch socket combination 3 pin 5 Amps multipurpose type 240 volts complete all as specified and directed.

S & F bell push switch 5 Amp flush type complete all as specified and directed.

S & F for 2/3 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed.

S & F for bell, ding- dong , AC, 230 Volt, single pole complete all as specified and directed.

S&F lamp holder PVC/Polycorbonate type with cord grip cap/back plate suitable for batten/angle /pendent fitting complete all as specified and directed.

S&F LED retrofit lamp of capacity 12/15 watt, B-22 holder base with polycabonate body and aluminium heat sink warm white complete including taking down old/ unserveciable CFL/bulb complete all as specified and directed.

S&F switch socket combination 2 in 1, 6 pin 16Amps multipurpose type 240 volts complete all as specified and directed.

S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete with suitable for 1 x 63Amp TPN as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs complete all as specified and directed.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 63 Amp in the DB complete with connection testing and commissioning

S&F Isolator SPN 40 amp 30mA for earth leakage. Over load and short circuit protection ISI marked complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead wire 4.0 mm dia (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing of earthing & dismantling /taking down existing old / unserveciable earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode.)

Supplying ,laying, commissioning & testing cross sectional area 25 Sqmm , 3.5 core XLPE cable insulated armoured, electric power cables (heavy duty) 1100 Volts grade with standard aluminium conductor including taking down existing old /unserveciable cable complete all as specified & directed. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item

S &F for 50 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hardstanding including taking down existing pipe complete all as specified and directed.

M&L Sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. NOTE : Punned thickness only shall be measured.

Supply and laying dry well burnt locally available brick sub class'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as spcified and directed

S&F stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

M&L for drilling through bore hole 60/80 bore pipe by trenchless technology without disturbing the existing road or hard surface all as directed.

Supply & fix exhaust fans of metallic body heavy duty AC single phase 230/ 240 V of size 300 mm sweep with bracket, louver shutters, nuts & bolts including connection with PVC copper flexible wire for Exhaust fans.

S & F Building security/street LED light fitting 35 watt IP-65 protection pressure diecast alluminium body ,heat resistant glass ,including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5 long complete fixed in GI pipe fixed to pole complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls as directed.

Supply and fixing in repair modular Switch 6 Amps single pole, one way complete all as specified and directed .

Supply and fixing in repair Modular Socket outlet, multi purpose, 5 Pin 6 Amps flush type complete all as specified and directed .

Supply and fixing in repair Modular Switch 16 Amps single pole, one way complete all as specified and directed .

Supply and fixing in repair Modular Socket outlet, multi purpose, 6 pin 16 Amps universal socket complete all as specified and directed .

Supply and fixing for modular Fan regulator 120 watt 2 module complete all as specified and directed.

Supply and fixing bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed.

Supply and fixing Ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .

S&F in LED tube light fitting batten type single tube 1x 18/20 watt 230 volt wall/ ceiling mounted luminaire industrial type made of sheet metal box type suitable for T- 8 tube complete with electric electronic driver and bipin holder including one no tube 18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Bajaj/Surya/ Havells / Crompton Greaves/HPL

S&F surface/recessed mounting fitting 36 watt ultra modern design architectural LED luminaire which provides soft-light and glare free symmetrical illumination suitable for Armstrong / Grid Ceiling including LED driver and 36 watt lamp incl all accessories complete all as specified and as directed. Make, Havells / Philips / Bajaj / Crompton Greaves /HPL

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 2.5 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.

M&L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees, bends, junction grade, includsive of all fitting such as tees, bends, junction boxes, elbows saddles. Pipe hooks, couples and lock out etc 25 mmd external dia, fixed on surface mounted complete and making good disturbed surfaces in repairs all as directed.

Supply & fixing in repair sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amps 240 volts fixed in repairs complete.

M/S MODERN CONSTRUCTION (BID ID -3102693)

Jai Ambay Construction (BID ID -3106606)

M/S SHEO KUMAR SINGH AND SONS (BID ID -3106178)

MS JAGDAMBA ENTERPRISES (BID ID -3110204)

M/S NANDA CONSTRUCTION (BID ID -3105471)

CP RAJ (BID ID -3105514)

M/s KUMAR ENTERPRISES (BID ID -3106046)

RC GUPTA AND SONS (BID ID -3106176)