Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.0 LAccepted-AOC FIRDOUS ABAD BATMALOO SRINAGAR PIN 190004 J K | SRINAGAR | SRINAGAR | J K | 190004 | L1 | Accepted-AOC Awarded being lowest bidder as per NIT | |
| 2 | L2₹24.8 L+₹4.1 L (20.1%)Rejected-Finance | L2 | Rejected-Finance Rejected being L2 bidder | |
| 3 | L3₹29.7 L+₹9.0 L (43.5%)Rejected-Finance | L3 | Rejected-Finance Rejected being L3 bidder |
| Sl No | Description | Qty | Unit | Concept Engineering & Constructions L2 | VEDA INFRASTRUCTURE L1 | M/S N A Enterprises L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and as directed. | 200 | Cum | 250 ₹50,000 | 100 ₹20,000 Lowest | 150 ₹30,000 |
| 2.00 | Excavation in trenches n. exc. 1.5 mtr in wide and exc. 1.5 mtr but n exc 3.0 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed. | 1 | Cum | 500 ₹500 | 400 ₹400 | 100 ₹100 Lowest |
| 3.00 | Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed. | 101 | Cum | 100 ₹10,100 | 20 ₹2,020 Lowest | 50 ₹5,050 |
| 4.00 | Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. | 100 | Cum | 150 ₹15,000 | 30 ₹3,000 Lowest | 50 ₹5,000 |
| 5.00 | Sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I.
Note :-
1. Dry fine sand of best available quality shall be used. 2. Punned thickness shall be measured and paid. | 75 | Cum | 800 ₹60,000 | 700 ₹52,500 | 500 ₹37,500 Lowest |
| 6.00 | Supply and laying for unreinforced precast concrete cable coveron the cable in the trench , class HV, Type-I, flat size 300mm X180mmX40mm (for 11KV HT cable) all as specified and directed by Engr-in-Chrage. | 4,800 | Each | 50 ₹2,40,000 | 20 ₹96,000 Lowest | 30 ₹1,44,000 |
| 7.00 | M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation and mass concrete for fixing poles etc including excavation of any strata and relaying taken out cable complete all as specified and directed. | 0.5 | Cum | 4,500 ₹2,250 | 2,500 ₹1,250 | 2,000 ₹1,000 Lowest |
| 8.00 | M&L PCC 1:3:6, type C1 (using 20 mm graded crushed stone aggregate) in coping / plinth blocks for poles and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary steel form work and finishing the surfaces fair in forms complete all as specified and directed. | 2 | Cum | 7,500 ₹15,000 | 2,700 ₹5,400 | 2,500 ₹5,000 Lowest |
| 9.00 | Supply and fixing in renewal of unserviceable insulator post type insulator 254 mm height, 210 mm dia for 33000 volts grade. including 01 galvanized M.S.spindle, two galvanised iron washers and one galvanised iron nut straps etc including taking down old one complete all as specified and directed by Engineer-in-Charge. | 5 | Each | 700 ₹3,500 | 300 ₹1,500 Lowest | 2,000 ₹10,000 |
| 10.00 | S & F in renewal of unserviceable disc type, insulator three in series, porcelain, vitreous, 145mm height and 255mm dia ball and socket type, white brown or green, single disc assembly for tension with tension clamps for conductors, working pressure 11000 Volts with GI nut, bdfs straps etc including taking down old one complete all as specified and as directed. | 5 | Each | 800 ₹4,000 | 200 ₹1,000 Lowest | 800 ₹4,000 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
23 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 133 WORKS ENGRS
HQ 133 WORKS ENGRS, C/O 56 APO, PIN- 914133
CWEK/TOKEN-28/864 EWS/2025-26- MAINTENANCE OF 33 KV and 11 KV HT NETWORK AT BB CANTT SRINAGAR UNDER GE 864 EWS, TPP 2025-26
2025_MES_715797_1
CWEK/TOKEN-28/864 EWS/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE 864 EWS
Class D and above and Category b iii
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹60,000
HQ 133 WORKS ENGRS
1 Sept 2025
20 Jun 2025
31 Jul 2025
20 Jun 2025
23 Jul 2025
5 Jul 2025
20 Jun 2025 - 23 Jun 2025
25 Jun 2025
Amount
Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches n. exc. 1.5 mtr in wide and exc. 1.5 mtr but n exc 3.0 mtr in depth for laying of underground cable and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.
Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
Sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I. Note :- 1. Dry fine sand of best available quality shall be used. 2. Punned thickness shall be measured and paid.
Supply and laying for unreinforced precast concrete cable coveron the cable in the trench , class HV, Type-I, flat size 300mm X180mmX40mm (for 11KV HT cable) all as specified and directed by Engr-in-Chrage.
M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation and mass concrete for fixing poles etc including excavation of any strata and relaying taken out cable complete all as specified and directed.
M&L PCC 1:3:6, type C1 (using 20 mm graded crushed stone aggregate) in coping / plinth blocks for poles and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary steel form work and finishing the surfaces fair in forms complete all as specified and directed.
Supply and fixing in renewal of unserviceable insulator post type insulator 254 mm height, 210 mm dia for 33000 volts grade. including 01 galvanized M.S.spindle, two galvanised iron washers and one galvanised iron nut straps etc including taking down old one complete all as specified and directed by Engineer-in-Charge.
S & F in renewal of unserviceable disc type, insulator three in series, porcelain, vitreous, 145mm height and 255mm dia ball and socket type, white brown or green, single disc assembly for tension with tension clamps for conductors, working pressure 11000 Volts with GI nut, bdfs straps etc including taking down old one complete all as specified and as directed.
M&L in renewal of old unserviceable pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut, 50mm height, 150mm dia for 11000 Volts grade complete all as specified and directed.
M&L in renewal of cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shapeor size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of alumium paint, all as specified and directed.
Supply and fix air break gang operated switches for outdoor uses vertical/horizontal mounted including 12 insulators and operating mechanism for repair/renewal of broken /worn out components and insulators etc for current rating upto 200 Amps 11000 Volts complete all as specified and as directed.
Supply and fix air break gang operated switches horizontal mounted including 12 insulators and oeprating mechanism for repair/renewal of broken /worn out components and insulators etc for current rating upto 200 amps horizontal type isolator with copper tube 25 mm dia 3mm thick for switch connector for 33000 Volts complete all as specified and directed.
Supply & fixing lightening arrestor for outdoor use, expulsion type complete with all fittings, transmission class, discharge capacity 11 Kilo Volts 65KA complete all as specified and directed
Supply & fixing lightning arrestor for outdoor use, expulsion type complete with all fittings, transmission class, discharge capacity 33 Kilo Volts 65KA complete all as specified and directed
Supply and fixing in renewal of old unserviceable steel tubular swaged poles type 410 SP-55, 11.00 meter long, complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified including painting with two coats of aluminium paint heat resistant type over one coat of red oxide primer and making 06 Nos bands/straps with white and black colour (30 cm wide each) synthetic enamel paint at a distance 30 cm from plinth block and numbering of poles with black bitumenous synthetic enamel paint in 2.5 cm height including tarring one coat on steel surface embedded in concerete foundation complete all as per specified and directed
Supplying, laying or fixing, jointing and testing in renewal of u/s HT under ground electric power cable, XLPE insulated, screened , PVC bedded, galvanised steel strip or wire armoured, (conforming to ISI-7098), ISI Marked, with aluminium conductor multi stranded, heavy duty, 11000 Volts grade (earthed), cross sectional area 95 sqmm 3 core, laid in trenches/laid under floor, roads, paths or fixed on walls /on poles/in ducts etc.complete all as specified and directed of following sizes :- Notes :- (a) Excavation , returning filling, sand cushioning and cable cover for the above work will be measured and paid seperately. (b) Taking out of the old unserviceable cable is included in the quoted rates.
-Ditto- all as per Item No 18 but 120 sqmm 3 core cable complete all as specified and as directed.
Supply, laying, jointing, testing and commissioning in renewal of old unservicebale HT cable with new High Tension (HT) XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty, earthed electric power cable, cross sectional area 300 Sqmm 3.0 core aluminum conductor 33000 Volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through roads etc, complete all as specified and as directed. Notes :- (a) Excavation , returning filling, sand cushioning and cable cover for the above work will be measured and paid seperately. (b) Taking out of the old unserviceable cable is included in the quoted rates.
M&L for detecting the fault in 33 KV underground cable of 300 sqmm with the help of cable fault detector and taking up or down defective/faulty HT underground cable 33000 volts 300 sqmm 3.0 core from the existing trench/duct/pole etc and re-laying the same in the trenches/duct/pole etc after rectification of defects , including meggering of cable, provn of cable lugs, glands, thimble, insulation tape and connecting up with existing control gears, panels etc as per site requirement, complete all as specified and as directed. Notes:- (a) Excavation, returning filling etc shall be measured and paid seperately. (b) Cable end termination joints/straight through joints required for the same will be paid separately. (c) All the tools required for the same is included in the quoted rates.
Supply, jointing, commissioning and testing cable end jointing kit, outdoor type, suitable for 11KV 'E' grade ABC XLPE cable of size 95 sqmm 3 core and 1 bare messanger 95 Sqmm including jointing material complete all as specified and directed.
Supply, laying, jointing, commissioning in renewal 11000 volts (earthed) grade Aerial Bunched Cable with 3 (three) power Cores Stranded, compacted Circular Aluminium Conductor 95 Sqmm screened with Black extruded semi-conducting Compound, natural colored XLPE insulated core screened with Black extruded semi-conducting compound and one layer of copper tape and covered with Black extruded PVC (Core identification by ridges one, two and three over PVC covering) and one bare Messanger wire 95 Sqmm ( combination of glavanized steel wire and Al. Alloy wires), complete all as specified and directed. Note :- Quoted Rates shall be deemed to include cost of MS clamps required for fixing of cable on HT pole.
Supplying, fixing, jointing and testing & renewal of u/s heat shrinkable cable end termination joint , out-door type with and including jointing materials suitable for 11 KV , XLPE cable of size (50 to 95) sqmm , 3 core, complete all as specified and directed.
Supplying, fixing, jointing and testing & renewal of u/s Heat shrinkable cable end joint , out-door type with and including jointing materials suitable for 11 KV , XLPE cable of size (120 to 185) sqmm , 3 core , complete all as specified and directed.
Supplying, fixing, cable jointing kit for 11 KV (Earthed) grade cable for in renewal of u/s straight through heat shrinkable joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 Sqmm to 95 Sqmm complete all as specified and directed.
Supplying, fixing, cable jointing kit for 11 KV (Earthed) grade cable for in renewal of u/s straight through heat shrinkable joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size120 Sqmm to 185 Sqmm complete all as specified and directed.
M&L for fixing in repair outdoor termination heat shinkable type jointing kit for 33 KV (Earthed) grade cable complete with jointing meterial and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 300 Sqmm, all as specified.
M&L for fixing in repair outdoor Straight through heat shinkable type jointing kit for 33 KV (Earthed) grade cable complete with jointing meterial and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 300 Sqmm, all as specified.
S&F in renewal of u/s tubing 'light grade' galvanised iron with all fittings including fixing on poles, walls etc. with flat iron clamps/ bolts / nuts/ washers or laid in floors/under roads 150 mm bore complete all as specified and directed.
-Ditto- all as per Item No 30 here-in-before but 80mm bore complete all as specified and as directed.
-Ditto- all as per Item No 30 here-in-before but 50mm bore complete all as specified and as directed.
M&L for renewal of damaged copper bus bars having length 5-6 mtr,25 mm dai complete all as specified and as directed
S&F in renewal of heat shrink insulation tubes for all the bus bars and maintaining the RYB sequence in the system complete all as specified and as directed
M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.5 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to and incl galvanized strip 25x4mm as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 5 of SSR Part-I 1991 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, including test point complete all as specified and as directed
M&L for renewal of damaged earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation fer loop earthing etc.as required 25x4mm galvanised iron strip complete all as specified and as directed
M&L for topping up of graded course aggregate 20mm to 40 mm of nominal size in base of 2/4 pole (electrical poles) structure and electrical sub stations/Main power house 33 KV Grid etc complete all as speciried and directed.
M&L boring of holes under roads pavements hards standing by trenchless technology using ulta sound technique & necessary machine including HDPE pipe of 6 kg/sqmm of 150 mm dia suitable 0.4 Mpa working pressure all as specified & directed bt E-in-Charge.
M&L for trimming of tree branches touching with 33/11 KV HT over head line in the entire cantonment so as to maintaining sufficient clearance and avoid fault on over head lines complete all as specified and directed. Note :- One span will be counted in between the distance from one pole to another pole and all T&P reqd for the same is included in quoted rates
Concept Engineering & Constructions (BID ID -3363552)
M/S N A Enterprises (BID ID -3368784)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .