Renovation of Kitchen

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Centring & shuttering including strutting, propping etc. & removal of form for :

Shelves (Cast in situ)

Edges of slab and breaks in floors & walls.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite of any colour and shade

Area of slab over 0.50 sqm

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Kiln seasoned and chemically treated hollock wood

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves/ shutters with screws , Hinges and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

25 mm thick

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.

size 50 mm

size 65 mm

Providing and fixing chromium plated brass handles with necessary screws etc. complete:

Providing and fixing aluminium tower bolts, ISI marked, ( Evesest , Everite ) anodised (anodiccoating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete :

Providing and fixing bright finished 100 mm mortice lock with 6 levers ( Godrej , Doorset Make ) without pair of handles of approved quality for aluminium door, withnecessary screws etc complete as per direction of Engineer- in-charge

Providing and fixing Ist quality ceramic glazed wall tiles (12" x 24" as approved ) conforming to IS: 15622 (thickness to be specified by the manufacturer),(Kajaria , Somany ,Nitco, RAK make) of approved make, in all colours,shadesexcept burgundy ,bottlegreen ,black of any size as over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and in white pigment of matching shade complete.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

25 mm thick

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum moisture resistant board .

12 mm cement plaster of mix :

1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix :

1:6 (1 cement: 6 coarse sand)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:

13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade.

Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer?in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer -in -charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling tile work in floors, wall tiles and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 06 mm to 25 mm

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 mtr. Lead.

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :

15 mm to 40 mm nominal bore

Dismantling of flushing cistern / EWC / Wash Basin /Indian WC of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unser- viceable materials within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink ( Diamond/ Nirali, Neelkanth make ) as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

17.10.1 Kitchen sink with drain board

510x1040 mm bowl depth 225 mm

Providing and fixing soil, waste and vent pipes :

100 mm dia

Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989

Providing and fixing plain bend of required degree.

100 mm dia

Sand cast iron S&S as per IS : 3989

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :

100x100x100x100 mm

Sand cast iron S&S as per IS : 3989

Providing and fixing collar :

Sand cast iron S&S as per IS : 3989

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :

100 mm inlet and 100 mm outlet

Sand cast iron S&S 3989

Providing and fixing G.I. Pipes ( Jindal Hissar ,Class- B or TATA make ) complete with G.I. fittings ( SVW ,Unik make ) and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall etc.

15 mm dia nominal bore

20 mm dia nominal bore

Providing and fixing G.I. Union ( SVW , Unik )in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

15 mm nominal bore

20 mm nominal bore

Providing and fixing C.P. brass angle (Jaquar-5053N / Hindware -F280004CP make) valve for basin mixer and geyser points of approved quality conforming to IS:8931

15mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing unplasticised P.V.C. connection ( Viking , Jaquar make ) pipe with PTMT nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 45 cm length

Cutting holes up to 30x30 cm in walls including making good the same:

With common burnt clay F.P.S. (non modular) bricks

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS: 733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beeding for glazing/ panelling, C.P. Brass / Stainless steel screws, all complete as per architectural drawings and directions of Engineer-in-charge. (Glazing and panelling to be paid for seperately).

For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of PVC/Neoprene gasket required (Fittings shall be paid for seperately)

Bronze Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board confirming to IS: 12823 grade -I Type-II, in panelling fixed in aluminium doors, window shutters and partition frames with C.P. Brass/ Stainless steel screws, all complete as per architectural drawings and directions of Engineer-in-charge.

Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc with EPDM Rubber/Neoprene gasket etc.complete as per architectural drawings and directions of Engineer-in-charge.(Cost of aluminium snap beading shall be paid in the basic item):

With float glass (Saint Gobain ,Modi guard make) panes of 6.00 mm thickness.

Providing and fixing mineral fibre false ceiling tiles ( Armstong make) at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm ) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be prepainted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)

Providing and fixing C.P. brass sink mixer single hole with swinging extended spout ,adjusting arms ,table mounted model with 450mm long braided hoses foam flow ,composite one piece body ( Jaquar / Grohe / Kholer make as per the direction of Engineer-in-Charge.

Supplying , installation , testing & commissioning of six burner indian cooking range with one under shelf and ash trays , heavy duty commercial burners with all required accessories made of 304 grade Stainless steel 18 gauge thick sheet of size 144inch x 36 inch ,34 inch high and 4 inch border above top ( all the accessories are of Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of two burner indian cooking range with one chinese and one Indian cooking burner ,under shelf and ash trays , heavy duty commercial burners with all required accessories made of 304 grade Stainless steel 18 guge thick sheet of size 48 inch x 30 inch ,34 inch high and 4 inch border above top ( all the accessories are of Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of working table with two under shelfs made of 304 grade Stainless steel 18 guge thick sheet of size 36 inch x 30 inch ,34 inch high and 4 inch border above top ( all the accessories are of Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of Tawa puffer plate with one under shelfs made of 304 grade Stainless steel 18 guge thick sheet of size 48 inch x 24 inch ,34 inch high ( all the accessories are of Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of working table Roti pedda with one under shelfs made of 304 grade Stainless steel 18 guge thick sheet of size 36 inch x 24 inch ,34 inch high and 4 inch border above top ( all the accessories are of Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of utensile rack with four shelfs made of 304 grade Stainless steel 18 guge thick sheet of size 36 inch x 24 inch ,72 inch high ( Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning table for washed utensile rack with one under shelfs made of 304 grade Stainless steel 18 guge thick sheet of size 36 inch x 24 inch ,34 inch high and 4 inch high back on top ( Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of S.S. double bowl sink made of 304 grade Stainless steel 18 guge thick sheet of size 60 inch x 24 inch ,34 inch high and 4 inch high back on top ( Sunflame , Elica , Unitech make ) with stand etc complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of working table for used utensile with one under shelfs made of 304 grade Stainless steel 18 guge thick sheet of size 36 inch x 24 inch ,34 inch high and 4 inch high back on top ( Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of working table for used utensile with one under shelfs made of 304 grade Stainless steel 18 guge thick sheet of size 24 inch x 24 inch ,34 inch high and 4 inch high back on top ( Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of S.S.double bowl sink with side tables for used utensiles made of 304 grade Stainless steel 18 guge thick sheet of size 84 inch x 24 inch ,34 inch high ( Sunflame , Elica , Unitech make ) with stand etc complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of S.S. box exhaust hod waffle filter made of 304 grade Stainless steel 18 guge thick sheet of size 12 feet x 3 feet ( Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of axil fan heavy duty commercial exhaust fan ( Crompton , Emerson , Copeland make ) ( complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of four burner indian cooking range with one under shelf and ash trays , heavy duty commercial burners with all required accessories made of 304 grade Stainless steel 18 gauge thick sheet of size 96 inch x 36 inch ,34 inch high and 4 inch border above top ( all the accessories are of Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Supplying , installation , testing & commissioning of S.S. counter for seek and roti pedda with hut type hood on top with two undershelfs made of 304 grade Stainless steel 18 guge thick sheet of size 36 inch x 24 inch x 34 inch + 38 inch above pedda plateform ( Sunflame , Elica , Unitech make ) complete in all respect as per ther directions of Engineer-in-Charge.

Wiring for circuit/ submain wiring ( Ecko , Finolax , Polycab) alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit ( Diplast , Polyplast ) as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing following modular switch/ socket ( L&T , Legrand ) on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate ( L&T , Legrand ) on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box ( National make )alongwith modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75 mmX75 mm)

3 Module (100 mmX75 mm)

6 Module (200 mmX75 mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.

Thickness 0.63 mm sheet

Supply and Installation of exhaust fan 200 mm swipe, with louvers ( Polycab , Havells make in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. ( Anaylsis attached)

Supplying and intallation of slim LED tube light fitting ( Philips ,Wipro make ) complete with connections , testing and commissioning etc. as required or as per the direction of Engineering in charge.

Providing and fixing LED ceiling lights 36 watts as per the direction of Engineer -in-Charge . (Make: Philips & Wipro).

Size 600x600 mm ,3000 lumens

Providing and fixing LED ceiling lights 22 watts as per the direction of Engineer -in-Charge . (Make: Philips & Wipro).

Size 300x300 mm ,2000 lumens

Providing and fixing LED cob lights ( strip ) 25 watt with minimum length of 5.0 mtrs in approved colour / pattern ( Philips/ wipro/ Havells make ) with driver as per the direction of Engineer -in-Charge . (Make: Philips & Wipro).

K AND K CONSTRUCTIONS