Major epairs on a/c of recapitalisation of Truck No. JK14B-3304

Amount

Labour charges for dismantling of Rear body floor and Tailboard for repair, by way of extracting of damaged material with P/F of new material, i.e. Shesham wood cut to size 4’x 7” x 3”- 02 nos -1.16 cft., 8’x7”x4”-04 nos- 6.12 cft M.S sheet 4’x8’ 18 gauge -05 nos, M.S angle iron 60x60x6mm –02 lengths, Sal wood for flooring & cabin Packing (cut to size) 8’X9”X 1.1/2”- 08 Nos., 6.00 CFT, 8’X12’’X1’’=4 Nos., 2.65 CFT, 8’X12’’X1.1/4’’=3 Nos., 2.50 CFT, Sal wood required for Dalla 8’X8”X1.5’’-3 nos, 2 cft, Sal wood required for side runner (cut to size) 16’X2.1/2’’X1’’=0.28 CFT, 16’X4’’X4’’-02 nos 3.48 CFT, M.S angle iron 40x40x5mm – 50 kg, nut and bolts asserted -15 kg, G.I sheets 3’x6’ 22 gauge for mud guards -02 no, mud guard chain -08 nos, nails assorted -15 kg, steel screw-04 pkt, welding rod -04 pkt, Tailboard chain -02 nos, J hooks -20nos, M.S pipe 1.5” dia -16 ft. Angle iron 25x25 x3mm -10 ft. bamboo support bracket -02 nos, bamboo -01 no, Tailboard hinges- 05 pairs ., the job also includes welding works to rear body and Tailboard, rear body/ floor replacement of cross rafter, fitting of angle iron supports sides of body and Denting/ Patching including gas welding where necessary, denting and repair of mud guard of the vehicle (both rear and front)by way of dismantling of it from the vehicle , cutting of old rusted portion by skilled workers. (Complete Job )

Labour charges for dismantling of tool box & cabin with P/F of new material Sal wood required for cross members &packing rafter (cut to size) 8’X5”X3”= 4 nos. 3.28 CFT , 8’X5”X4” =3 no. 3.24 CFT, 8’X4.1/2” X 5” =2 no. 2.46 CFT, 8’X2.1/4” X 2.1/2’’= 3 nos. 0.90 CFT, 8’X9’’X4’’ = 2 nos. 3.96 CFT Shesham wood for cabin side support (Cut to size) 8’X10’’X1.1/2’’ =4 nos. 3.32 CFT, 8’X2.1/2’’X2.1/2’’=2 nos. 0.64CFT, 4’X2.1/2’’X2.1/2’’=8 nos. 1.28CFT, 5’X4’’X2’’ =6 nos. 1.58 CFT, 4’X2.1/2’’X2.1/2’’=6 nos. 0.96 CFT, 2’X1.1/2’’X2.1/2’’=12 nos. 0.60 CFT , 2.1/2X1.1/2X2.1/2 = 4 no. 0.25 CFT Batton-02 length, Ply wood 12mm [8X4]- 02 sheet, Ply wood 6mm[8X4] 01 no, Ply wood 3mm [8X4]- 01 no. G.I sheet 3’ x 6’ -04 nos, chequered sheet 8’x4’ -04 nos, flat Aluminum 2’’ -08 length, angle Aluminum ¾’’ -05 length, nut / bolts assorted -15 kg, nail assorted 12-kg, screw 1-½’’ -05 pkt., steel screw -05 pkt, glass channel frame complete -06 nos, mesh channel frame complete -04 nos, sunmica 8’x4’-02 sheets, G.P sheet 3’ x 6’ -02 nos, door handles -04 nos, door mirrors -02 nos, door hinges -04 nos, side mirror with brackets -02 nos, fevicol 05kg, water channel std -04 nos, welding rods -02 pkts, tower bolt-10 no.,fevicol-05 kg, cross rafter- 4 nos. side runner (battons). It also includes labour charges for dismantling/ removal of old/ damaged cabin hood, replacement of rear cabin supports/wooden planks and cost of material (Complete Job).

P/F of spares /material in place of defective parts by way of dismantling of rear axle ( differential) and replacement of crown wheel and pinion-01 set, Pinion inner brg-01 no, pinion outer brg-01 no, spherical washer-04 nos, star washer-01 set, thrust washer-02 nos, crown wheel adjustment bolt-01 no, axle brg-02 no, axle joint-02 nos, pinion cup and cone assembly -01 set, cotton cloth-02nos and adjustment of play, differential oil -12 ltrs. The job includes cost of material and labour charges (Complete job)

Repairing to front and rear leaf spring assembly by way of dismantling by cutting of centre bolt by gas cutter, and removing of damaged items, and P/F of new items in place defective items, front leaf spring main R/H – 01no, front leaf spring L/H 2nd – 01 no, front leaf spring R/H 4th – 01 no, rear leaf spring R/H main – 01no, LH Rear 2nd leaf-01 no., LH Rear leaf spring 4th-01 no. centre bolt front – 02 nos, centre bolt rear – 02 no, leaf spring bush – 04nos, leaf spring pin – 04 nos, shackle assy front – 01 no, shackle assy rear – 01 no, U bolt – 04 nos, U Clamp – 04 nos, job also includes retensioning of all leaf spring by hammering to the optimum curvature , assembling of leaf spring assy, fitting and alignments of front and rear leaf spring assy., and all allied works Complete job includes cost of materials and labour charges.

Repairs to Gear box :- Labour charges for dismantling of gear box & removing of damaged parts with P/F of new parts i.e. 1st speed gear-01 no., 3rd speed gear-01 no counter shaft bearing-02 no., shaft bolt with washer-05 no., synchronizing ring-02 no., chuck nut-02 no., Needle bearing -01 no., Puppet bolt & spring, Joint kit -01 no., Engaging gear-01 no., Main shaft chuck nut -01 no. Gear oil-08 ltrs the job includes polishing of main shaft, labour charges and cost of material. (Complete job)

P/F of spares /material in place of defective/ worn out parts of vehicle during annual fitness by way of dismantling of turbo charger with providing /fitting of new parts i.e. turbo charger kit-01 no. The job includes cost of material and labour charges and complete testing .(Complete job)

Repairs to brake system, by dismounting the air brake booster, dismantling them, checking and cleaning of parts, then removing worn out/ defective parts, P/F of air booster diaphragm-01 no, air booster piston-01 no, unloader valve kit- 2 nos, and bush set, testing of boosters on pressure machine, refitting. The job including the cost of material and labour charges ( Complete Charges)

Labour charges for dismantling of water body and repairing the radiator with providing/fitting of new parts i.e. water body-01 no, hose pipe set-01 no, Water pump pulley-01 no, Radiator mountings-02 no, coolant tank-01 no, coolant -06 ltrs & other allied material. Complete servicing of radiator8, repairs by means of gas welding& testing of leakage. The job includes cost of material and labour charges (Complete job)

Repairs to Bumper and bonnet :- Labour charges for repairs to bumper, bonnet hood, removing fitting of bumper after denting, patching by way of gas welding with nut & bolts assorted-08 no.,patching of hood and area around front glass after removing of glass by using gas welding, fitting the same glass with new beading rubber, side mirror -02 no.The job includes cost of material and labour charges. Complete job.

Repairs to wiring of the vehicle by way of replacement of old / defective / burnt out wiring with new wiring for the vehicle, this also includes replacement of the complete fuse box of the vehicle and P/F of new head lights for the vehicle and testing the complete new circuit on load so as to ensure proper functioning of the auto-electric circuit of the vehicle. Job includes cost of material, labour charges (Complete Job)

Repairs to Self: - Repairs to self of the vehicle by dismantling it, cleaning and testing of parts and the P/F of Self carbon brush set-01 set, Field coil -01 set, bendix drive-01 no., petrol for cleaning of parts, self solenoid switch-01 no., voltage regulator-01 no. including rewinding of armature. Testing and fitting to the vehicle. The complete job include cost of material and labour charges Complete job.

Labour charges for repair to Alternator of the vehicle by removing/dismantling all damaged/ worn out parts, checking and testing of parts and then P/F of new parts i.e. alternator plate, rotor, rectifier, rectifier plate, carbon brush set and electronic cut out, washing with petrol and assembling ,fitting, testing. The job includes cost of material and labour charges at site. (Complete job)

Labour charges for repairs to driver seat , sleeping seat( hanging and folding tye) of vehicle by way of removing of old material & P/F of new material i.e. angle iron, nuts, bolts, welding rods, jute , foam, raxine & sheet cover cloth . The job includes cost of material & labour charges.

P/F of new silencer with pipe , gasket, flange nut/bolt-02 no’s, clamp with nut/bolt – 02nos, assembling of exhaust system , including all allied works, The job includes cost of material and labour charges ( Complete job)

Labour charges for complete Painting of vehicle by way of scrapping its old paint and then painting of complete body, hood, tailboard with two coats of red oxide first and then two coats of décor paint and two coats on chassis and rims of four wheels with black paint. The job include cost of letter writing.(Complete Job )

NATIONAL ELECTRO-MECH COMPANY

M/s RK Elect. Mech. Engg and fabrication works