DEVELOPMENT OF DISTRIBUTION INFRASTRUCTURE AT KIPHIRE DISTRICT OF NAGALAND UNDER THE REVAMPED REFORMS-BASED AND RESULTS-LINKED, DISTRIBUTION SECTOR SCHEME-RDSS

Amount

A. REPLACEMENT OF LENGTHY LT NETWORK WITH HT

A-1 Supply of Materials for 11 kV Line with Weasel conductor (9.5 M GI STP SP-35 Pole)

GI Steel Tubular Pole SP-35(9.5M)

GI Channel 100x50x5 mm, 3.5 M Length weighing approx 9.60Kg/Mtr

GI Angle 65X65X6 mm, 1.5 M Length weighing approx 5.8 Kg/Mtr for 1Pole (SP) Brackets

GI Angle 65X65X6 mm , 5 M Length weighing approx 5.8 Kg/Mtr for 2Pole (DP) Bracing -

GI Angle 65X65X6 mm, 5M Length weighing approx 5.8 Kg/Mtr for Road Crossing

Pole Double Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole

dia - 90 mm (Top Section ) weighing 1.4 kg per pair

Pole Single Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole

dia - 90 mm (Top section) weighing 0.7 kg each for SP Brackets

dia - 115 mm (Middle section ) weighing 0.84 kg each for DP Bracing & Crossing

GI Nuts (heavy) & Bolts (full thread) of following sizes

16 mm dia x 250mm ((5/8"x10") each weighing 0.50 kg

16 mm dia x 150mm ((5/8"x6") each weighing 0.348 kg

16 mm dia x 75mm ((5/8"x3") each weighing 0.23 kg

GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt

HT stay set with GI Rod of 19mm dia and 1.6 Mtr Length, guy insulator complete set

GI Pipe 2", 3 mtr length for Pole Earthing

G.I Stay wire , 7/10 SWG, 14Mtr per stay set (weighing 0.460 kg per mtr)

G. I. wire , 8 SWG for Guarding weighing 0.131 Kg/Mtr

G. I. wire , 6 SWG for Pole earthing weighing 0.192 kg /mtr

11 kV Polymer Disc insulator B&S (70KN)

11kV Pin Polymer Insulator with GI Pin (24mm) with nuts and washers

H/W fittings for 11KV Polymer Disc Insulator (B&S) type 70KN tension type with DE Clamp (2 bolts)

ACSR Weasel Conductor

Tension Claim for ACSR Weasel

PG Claim for ACSR Weasel

11kV Danger plate

GI Barbed wire 12SWG for Anti Climbing device weighing 0.17kg/Mtr.

(A-2) Supply of Materials for Construction of 11/0.4 kV, 100KVA Distribution Transformer (Copper/Aluminium Wound) IS:1180 (part I) 2014 Amendment 4, conforming to BIS efficiency Level-2, table 3 Technical Specifications.

GI Steel Tubular Pole SP-35(9.5M)

100 KVA, 11/0.4 KV,3-Ph,CRGO Core, 50 Hz, Oil Type,Transformer (Copper/Aluminium Wound) with Off Circuit Tap Changer, as per IS:1180 (part I) 2014 Amendment 4, conforming to BIS efficiency Level-2, table 3 Technical Specifications.

GI Channel 100x50x5 mm, 2.2 M Length weighing approx 9.60Kg/Mtr -7 nos

GI Angle 50X50X6 mm weighing, 2.2 Mtrs weighing approx 4.5 Kg/Mtr for LT hor Gap/Kit Kat/DTR Metering Box- 2 NOS

11 KV Lightning arrestor, (9KV, 5KA, 1Ph) Outdoor, Gapless Polymer Lightning/Surge Arrestor Distribution Type/Class complete with insulating base, terminal connectors.

11KV, 400A, 3-ph, Gang Switch (Rocking Type Air Break Isolator) along with support insulators operating mechanism, Base Channel, down GI Pipe, terminal connectors and other accessories complete.

11 KV Drop Out fuse of rated current 100 A/ 200A/400A, 3Ph complete with fuse carrier assembly, fuse base & tube and mounting arrangement as per IS:9385 (Part-I to III).

DT Earthing

Copper Plate 2ft x2 ft, 3mm thick (weighing 11Kg each) for DT Neutral and Body - 2 nos

Copper Plate 1'x1', 3 mm thick (weighing 3Kg each) for LA -1No

Copper wire 5 SWG for Neutral - 12 Mtrs (weighing 0.204Kg per mtr)

Copper wire 5 SWG for Body - 12 Mtrs (weighing 0.204Kg per mtr)

Copper wire 5 SWG for LA - 20 Mtrs (weighing 0.204Kg per mtr)

Charcoal - (20kg/bag)

salt - 50Kg

2" (25mm) GI Pipe 3 mtr (for water recharge/alternate electrode)

ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.

11kV Pin Polymer Insulator with GI Pin (24mm) with nuts and washers

11 kV Polymer Disc insulator B&S (70KN)

H/W fittings for 11KV Polymer Disc Insulator (B&S) type 70KN tension type with DE Clamp (2 bolts)

Tension clamp for ACSR Weasel

PG Clamp for Weasel

LT XLPE Single Core Aluminium Conductor Armoured Power Cable (for DT terminal to LT Bus Bar and LT Bus bar to feeder Pole)

120 Sqmm (AL) for DTR LT Bushing to Bus Bar

95 Sqmm (AL) (for Bus to line 2 CKt)

70 Sqmm (AL) (for Neutral)

Copper Tubular Terminal ends/Lugs heavy duty (for DTs only)

Pole Double Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole

dia - 90 mm (Top Section ) weighing 1.4 kg per pair

Pole Single Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole

dia - 90 mm (Top section) weighing 0.7 kg each

dia - 115 mm (Middle section ) weighing 0.84 kg each

dia - 140 mm (Bottom Section) weighing 0.98 kg each

HT stay set with GI Rod of 19mm dia and 1.6 Mtr Length,Bow,Anchor Plate, guy insulator etc complete set

G.I Stay wire , 7/10 SWG, 14Mtr per stay set (weighing 0.460 kg per mtr) - 28Mtrs

GI Nuts (heavy) & Bolts (full thread) of following sizes

16 mm dia x 200mm ((5/8"x8") each weighing 0.43 kg - 12 nos

16 mm dia x 100mm ((5/8"x4") each weighing 0.269 kg - 48 nos

16 mm dia x 75mm ((5/8"x3") each weighing 0.23 kg - 16 nos

16 mm dia x 50mm ((5/8"x2") each weighing 0.19kg - 24 Nos

12 mm dia x 65mm ((1/2"x2 1/2") each weighing 0.115 kg

GI Washers 3mm thick of 18mm inner dia each weighing 0.011Kg, suitable for 16mm (5/8") threaded bolt - 200 nos

GI Washers 3mm thick of 14mm inner dia each weighing 0.0063Kg, suitable for 12 mm (1/2") threaded bolt - 6 nos

Danger plate 11KV

Aluminium Tape

DTR FENCING WITH welded Mesh Fencing made of GI Rod 6-Gauge vertical spacing 150mm horizontal spacing 100mm. The length of the roll shall be 15 Mtrs and height of the roll shall be 2.44 Mtrs.

G. I Pipe 50mm (2") 3 Mtrs (10') Length for Fencing Frame & Post

G. I Pipe 25mm (1") , 3 Mtr (10') Length for Fencing Gate Frame

(A-3) Supply of Materials for Construction of 11/0.4 kV, 63KVA Distribution Transformer (Copper/Aluminium Wound) IS:1180 (part I) 2014 Amendment 4, conforming to BIS efficiency Level-2, table 3 Technical Specifications.

GI Steel Tubular Pole SP-35(9.5M)

63 KVA, 11/0.4 KV,3-Ph,CRGO Core, 50 Hz, Oil Type,Transformer (Copper/Aluminium Wound) with Off Circuit Tap Changer, as per IS:1180 (part I) 2014 Amendment 4, conforming to BIS efficiency Level-2, table 3 Technical Specifications.

GI Channel 100x50x5 mm, 2.2 M Length weighing approx 9.60Kg/Mtr -7 nos

GI Angle 50X50X6 mm weighing, 2.2 Mtrs weighing approx 4.5 Kg/Mtr for LT hor Gap/Kit Kat/DTR Metering Box

11 KV Lightning arrestor, (9KV, 5KA, 1Ph) Outdoor, Gapless Polymer Lightning/Surge Arrestor Distribution Type/Class complete with insulating base, terminal connectors.

11KV, 400A, 3-ph, Gang Switch (Rocking Type Air Break Isolator) along with support insulators operating mechanism, Base Channel, down GI Pipe, terminal connectors and other accessories complete.

11 KV Drop Out fuse of rated current 100 A/ 200A/400A, 3Ph complete with fuse carrier assembly, fuse base & tube and mounting arrangement as per IS:9385 (Part-I to III).

DT Earthing

Copper Plate 2ft x2 ft, 3mm thick (weighing 11Kg each) for DT Neutral and Body - 2 nos

Copper Plate 1'x1', 3 mm thick (weighing 3Kg each) for LA -1No

Copper wire 5 SWG for Neutral - 12 Mtrs (weighing 0.204Kg per mtr)

Copper wire 5 SWG for Body - 12 Mtrs (weighing 0.204Kg per mtr)

Copper wire 5 SWG for LA - 20 Mtrs (weighing 0.204Kg per mtr)

Charcoal - (20kg/bag)

salt - 50Kg

2" (25mm) GI Pipe 3 mtr (for water recharge/alternate electrode)

ACSR WEASEL Conductor 6/2.59mm + 1/2.59 mm.

11kV Pin Polymer Insulator with GI Pin (24mm) with nuts and washers

11 kV Polymer Disc insulator B&S (70KN)

H/W fittings for 11KV Polymer Disc Insulator (B&S) type 70KN tension type with DE Clamp (2 bolts)

Tension clamp for ACSR Weasel

PG Clamp for Weasel

LT XLPE Single Core Aluminium Conductor Armoured Power Cable (for DT terminal to LT Bus Bar and LT Bus bar to feeder Pole)

i). 95 Sqmm (AL) ( DT Terminal to LT Bus)

ii) 70 Sqmm (AL) (for Bus to line 1 CKt)

iii). 25 Sqmm (AL) (for Neutral)

Copper Tubular Terminal ends/Lugs heavy duty (for DTs only)

ii) 95 Sqmm

ii) 70 Sqmm

iii) 25 Sqmm

Pole Double Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole

dia - 90 mm (Top Section ) weighing 1.4 kg per pair

dia - 140 mm (Bottom Section) weighing 1.96 kg per pair

Pole Single Clamp of G.I flat 50x6 mm suitable for GI SP 35 ST Pole

dia - 90 mm (Top section) weighing 0.7 kg each

dia - 115 mm (Middle section ) weighing 0.84 kg each

dia - 140 mm (Bottom Section) weighing 0.98 kg each

HT stay set with GI Rod of 19mm dia and 1.6 Mtr Length,Bow,Anchor Plate, guy insulator etc complete set

G.I Stay wire , 7/10 SWG, 14Mtr per stay set (weighing 0.460 kg per mtr)

GI Nuts (heavy) & Bolts (full thread) of following sizes

16 mm dia x 200mm ((5/8"x8") each weighing 0.43 kg

16 mm dia x 100mm ((5/8"x4") each weighing 0.269 kg

16 mm dia x 75mm ((5/8"x3") each weighing 0.23 kg

16 mm dia x 50mm ((5/8"x2") each weighing 0.19kg

12 mm dia x 65mm ((1/2"x2 1/2") each weighing 0.115 kg

GI Washers 3mm thick of 18mm inner dia each weighing 0.011Kg, suitable for 16mm (5/8") threaded bolt

GI Washers 3mm thick of 14mm inner dia each weighing 0.0063Kg, suitable for 12 mm (1/2") threaded bolt

Danger plate 11KV

Aluminium Tape

DTR FENCING WITH welded Mesh Fencing made of GI Rod 6-Gauge vertical spacing 150mm horizontal spacing 100mm. The length of the roll shall be 15 Mtrs and height of the roll shall be 2.44 Mtrs.

G. I Pipe 50mm (2") 3 Mtrs (10') Length for Fencing Frame & Post

G. I Pipe 25mm (1") , 3 Mtr (10') Length for Fencing Gate Frame

(A-4) Supply of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-70 Sq.mm on SP-11 Pole

GI Steel tubular pole SP-11

Pole Double Clamp 90mm dia (Top Section) made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles

Pole Single Clamp 90mm dia (Top Section) made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles

Cable ABC 1.1 kV XLPE with insulated messenger with one Streelight Cond. 3CX 70Sqmm (213A) + 1CX 50 Sqmm (Insulated Messenger/Neutral) + 1CX 25 Sqmm (Street light).

Cable Tie

Anchor clamp wedge type LT ABC as per NFC standard

Suspension Clamp ABC as per NFC standard

Eye Hook/Eye Bolt

Insulating Piercing Connector IPC EP95 for Streetlighting as per NFC Std.

Insulating Piercing Connector IPC P2X95 FOR DB CHARGING as per NFC Std.

Insulating Piercing Connector IPC P3X95 for ABC to ABC TEE connection as per NFC Std.

Cable end caps for ABC cables

ASA Distribution box for 140A, 1Ph. 10 Connectors with Spring Loaded Busbar System

Steel Strap for Installing DB size 20 mm X 1 m long

Buckles for steel Strap for DB Fixing

Insulated Waterproof bimetallic lug for Transformer Connections (Set contains 5 nos. Lugs as per Cable) as per NFC Std.

Insulated Crimping type Midspan Joint (Set contains 5 nos. Ferrules as per Cable) as per NFC Std.

GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt

LT stay set with GI Rod of 16mm dia and 1.6 Mtr Length,Bow,Anchor Plate, guy insulator etc complete set

G.I Stay wire , 7/12 SWG, 10Mtr per stay set (weighing 0.300 kg per mtr)

( A-5 ) Supply of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-50 Sq.mm on SP-11 Pole

GI Steel tubular pole SP-11

Pole Double Clamp 90mm dia (Top Section) made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles

Pole Single Clamp 90mm dia (Top Section) made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles

Cable ABC 1.1 kV XLPE with insulated messenger with one Streelight Cond. 3CX 50Sqmm (213A) + 1CX 35 Sqmm (Insulated Messenger/Neutral) + 1CX 16 Sqmm (Street light).

Cable Tie

Anchor clamp wedge type LT ABC as per NFC standard

Suspension Clamp ABC as per NFC standard

Eye Hook/Eye Bolt

Insulating Piercing Connector IPC EP95 for Streetlighting as per NFC Std.

Insulating Piercing Connector IPC P2X95 FOR DB CHARGING as per NFC Std.

Insulating Piercing Connector IPC P3X95 for ABC to ABC TEE connection as per NFC Std.

Cable end caps for ABC cables

ASA Distribution box for 140A, 1Ph. 10 Connectors with Spring Loaded Busbar System

Steel Strap for Installing DB size 20 mm X 1 m long

Buckles for steel Strap for DB Fixing

Insulated Waterproof bimetallic lug for Transformer Connections (Set contains 5 nos. Lugs as per Cable) as per NFC Std.

Insulated Crimping type Midspan Joint (Set contains 5 nos. Ferrules as per Cable) as per NFC Std.

GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt

LT stay set with GI Rod of 16mm dia and 1.6 Mtr Length,Bow,Anchor Plate, guy insulator etc complete set

G.I Stay wire , 7/12 SWG, 10Mtr per stay set (weighing 0.300 kg per mtr)

B. 11 KV RECONDUCTORING

(B-1) Supply of Materials for 11kV Reconductoring with 11KV MVCC 30 Sq. mm (10 M GI STP SP-45 Pole)

GI Pole SP-45

GI Channel Cross Arm (100x50x6x2200) mm

GI Angle Cross Arm (50x50x6) mm for cross bracing

11 KV Polymeric Pin Insulator

11 KV Polymeric Tension Insulator, 90 KN with clamps, nut and bolts

11 KV Tension Insulator hardware suitable for 70 sqmm covered conductor with clamps, nut & bolts

GI Pole Clamp 50x6 mm

1Cx30 Sqmm AL59 ACS - Weasel

HT Stay Set

HT Guy Insulator

GI Stay Wire, 7/10 SWG

HT Danger Plate

12 KV Lightning Arrestor, 9 KA

GI Nuts and Bolts(Assorted) with GI Washer

CI Earth Pipe 1.8 Mtr.

11 KV Wedge connector for bare to CC connection

IPC (for connecting 70 sqmm CC to CC)

GI Wire 6 SWG for earthing

11 PVC Insulated Cable Ties(Top) for 11 KV Polymeric Insulator

11 KV Termination kit suitable for 70 sqmm CC

11 KV GOAB 400 A

C. CABILING WORKS (LT bare to L T ABC replacement)

(C-1) Supply of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-70 Sq.mm on SP-11 Pole

GI Steel tubular pole SP-11

Pole Double Clamp 90mm dia (Top Section) made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles

Pole Single Clamp 90mm dia (Top Section) made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles

Cable ABC 1.1 kV XLPE with insulated messenger with one Streelight Cond. 3CX 70Sqmm (213A) + 1CX 50 Sqmm (Insulated Messenger/Neutral) + 1CX 16 Sqmm (Street light).

Cable Tie

Anchor clamp wedge type LT ABC as per NFC standard

Suspension Clamp ABC as per NFC standard

Eye Hook/Eye Bolt

Insulating Piercing Connector IPC EP95 for Streetlighting as per NFC Std.

Insulating Piercing Connector IPC P2X95 FOR DB CHARGING as per NFC Std.

Insulating Piercing Connector IPC P3X95 for ABC to ABC TEE connection as per NFC Std.

Cable end caps for ABC cables

ASA Distribution box for 140A, 1Ph. 10 Connectors with Spring Loaded Busbar System

Steel Strap for Installing DB size 20 mm X 1 m long

Buckles for steel Strap for DB Fixing

Insulated Waterproof bimetallic lug for Transformer Connections (Set contains 5 nos. Lugs as per Cable) as per NFC Std.

Insulated Crimping type Midspan Joint (Set contains 5 nos. Ferrules as per Cable) as per NFC Std.

GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt

LT stay set with GI Rod of 16mm dia and 1.6 Mtr Length,Bow,Anchor Plate, guy insulator etc complete set

G.I Stay wire , 7/12 SWG, 10Mtr per stay set (weighing 0.300 kg per mtr)

(C-2) Supply of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-50 Sq.mm on SP-11 Pole

GI Steel tubular pole SP-11

Pole Double Clamp 90mm dia (Top Section) made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles

Pole Single Clamp 90mm dia (Top Section) made of G.I flat 50x6 mm, suitable for SP 11 GI ST Poles

Cable ABC 1.1 kV XLPE with insulated messenger with one Streelight Cond. 3CX 50Sqmm (213A) + 1CX 25 Sqmm (Insulated Messenger/Neutral) + 1CX 16 Sqmm (Street light).

Cable Tie

Anchor clamp wedge type LT ABC as per NFC standard

Suspension Clamp ABC as per NFC standard

Eye Hook/Eye Bolt

Insulating Piercing Connector IPC EP95 for Streetlighting as per NFC Std.

Insulating Piercing Connector IPC P2X95 FOR DB CHARGING as per NFC Std.

Insulating Piercing Connector IPC P3X95 for ABC to ABC TEE connection as per NFC Std.

Cable end caps for ABC cables

ASA Distribution box for 140A, 1Ph. 10 Connectors with Spring Loaded Busbar System

Steel Strap for Installing DB size 20 mm X 1 m long

Buckles for steel Strap for DB Fixing

Insulated Waterproof bimetallic lug for Transformer Connections (Set contains 5 nos. Lugs as per Cable) as per NFC Std.

Insulated Crimping type Midspan Joint (Set contains 5 nos. Ferrules as per Cable) as per NFC Std.

GI Washers 3mm thick of 16mm (5/8") inner dia each weighing 0.011Kg, suitable for 16mm (5/8") thread bolt

LT stay set with GI Rod of 16mm dia and 1.6 Mtr Length,Bow,Anchor Plate, guy insulator etc complete set

G.I Stay wire , 7/12 SWG, 10Mtr per stay set (weighing 0.300 kg per mtr)

Description of Work / Item(s)

Amount

A. REPLACEMENT OF LENGTHY LT NETWORK WITH HT

(A-1) Erection, Installation, Commissioning & Testing of Materials for 11 kV Line with Weasel conductor (9.5 M GI STP SP-35 Pole)

Detail Survey

Tree cutting along the line including trimmimg, looping, branching etc as required

Erection of poles including excavation of earth; fitting of channels, angles, Hardware fittings, insulators, GI earth pipes etc.

Stringing of conductors

Erection of stay wires

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

PCC 1:3:6 Grouting of Stay (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

(A-2) Erection, Installation, Commissioning & Testing of Materials for Construction of 11/0.4 kV, 100KVA Distribution Transformer (Copper/Aluminium Wound) IS:1180 (part I) 2014 Amendment 4, conforming to BIS efficiency Level-2, table 3 Technical Specifications.

Erection of poles including excavation of earth; fitting of channels, angles, Hardware fittings, insulators, etc.

Erection, Installation, testing and commsissioning of 11/.4KV, 100 KVA Distribution Tranformers including Cables, LA, Gang Switch and DO Fuse alongwith all required accessories

Sub-Station Earthing; Earthing for DT and LA alongwith all required accessories

Erection of stay Set

Fencing of Sub-Station with welded Mesh Fencing including GI pipe as frame and post.

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

PCC 1:3:6 Grouting of Stay (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

(A-3) Erection, Installation, Commissioning & Testing of Materials for Construction of 11/0.4 kV, 63KVA Distribution Transformer (Copper/Aluminium Wound) IS:1180 (part I) 2014 Amendment 4, conforming to BIS efficiency Level-2, table 3 Technical Specifications.

Erection of poles including excavation of earth; fitting of channels, angles, Hardware fittings, insulators, etc.

Erection, Installation, testing and commsissioning of 11/.4KV, 100 KVA Distribution Tranformers including Cables, LA, Gang Switch and DO Fuse alongwith all required accessories

Sub-Station Earthing; Earthing for DT and LA alongwith all required accessories

Erection of stay Set

Fencing of Sub-Station with welded Mesh Fencing including GI pipe as frame and post.

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

PCC 1:3:6 Grouting of Stay (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

(A-4) Erection, Installation, Commissioning & Testing of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-70 Sq.mm on SP-11 Pole

Erection of poles including excavation of earth; fitting of Insulators & Accessories, Hardware fittings, etc.

Stringing of Cables ABC & Installation of all required accessories

Installation of Eye Hook/Eye Bolt, Insulating Piercing Connectors for Street Light, DB Charging and ABC to ABC TEE Connection

Installation of Anchor & Suspension Clamp

Installation of ASA Distribution box and Accessories

Installation of Pole clamp

Installation of Insulated Waterproof bimetallic lug Insulated Crimping type Midspan Joint

Erection of stay Set

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

PCC 1:3:6 Grouting of Stay (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

( A-5 ) Erection, Installation, Commissioning & Testing of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-50 Sq.mm on SP-11 Pole

Erection of poles including excavation of earth; fitting of Insulators & Accessories, Hardware fittings, etc.

Stringing of Cables ABC & Installation of all required accessories

Installation of Eye Hook/Eye Bolt, Insulating Piercing Connectors for Street Light, DB Charging and ABC to ABC TEE Connection

Installation of Anchor & Suspension Clamp

Installation of ASA Distribution box and Accessories

Installation of Pole clamp

Installation of Insulated Waterproof bimetallic lug Insulated Crimping type Midspan Joint

Erection of stay Set

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

PCC 1:3:6 Grouting of Stay (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

B. 11 KV RECONDUCTORING

(C-1) Erection, Installation, Commissioning & Testing of Materials for 11kV Reconductoring with 11KV MVCC 30 Sq. mm (10 M GI STP SP-45 Pole)

Erection of poles including excavation of earth; fitting of channels, angles, Hardware fittings, insulators, Clamp,GI earth pipes, anti climbine device etc.

Stringing of conductors and installation of all required accessories

Installation of LA & GOAB

Erection of stay Sets

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

PCC 1:3:6 Grouting of Stay (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

C. CABILING WORKS (LT bare to LT ABC replacement )

(C-1) Erection, Installation, Commissioning & Testing of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-70 Sq.mm on SP-11 Pole

Erection of poles including excavation of earth; fitting of Insulators & Accessories, Hardware fittings, etc.

Stringing of Cables ABC & Installation of all required accessories

Installation of Eye Hook/Eye Bolt, Insulating Piercing Connectors for Street Light, DB Charging and ABC to ABC TEE Connection

Installation of Anchor & Suspension Clamp

Installation of ASA Distribution box and Accessories

Installation of Pole clamp

Installation of Insulated Waterproof bimetallic lug Insulated Crimping type Midspan Joint

Erection of stay Set

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

PCC 1:3:6 Grouting of Stay (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

(C-2) Erection, Installation, Commissioning & Testing of Materials for Construction of 3 Ph, 5 Wire LT Line AB Cable-50 Sq.mm on SP-11 Pole

Erection of poles including excavation of earth; fitting of Insulators & Accessories, Hardware fittings, etc.

Stringing of Cables ABC & Installation of all required accessories

Installation of Eye Hook/Eye Bolt, Insulating Piercing Connectors for Street Light, DB Charging and ABC to ABC TEE Connection

Installation of Anchor & Suspension Clamp

Installation of ASA Distribution box and Accessories

Installation of Pole clamp

Installation of Insulated Waterproof bimetallic lug Insulated Crimping type Midspan Joint

Erection of stay Set

PCC 1:3:6 Grouting of Poles (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

PCC 1:3:6 Grouting of Stay (1.5ftx1.5ftx4 ft) per pole - 0.25 Cum)

Description of Work / Item(s)

Amount

Taxes Applicable on Supply and Erection, Installation & Commissioning of Materials

Total GST on Supply of Materials (BoQ1)

Total GST on Erection, Installation & Commissioning (BoQ2)

Description of Work / Item(s)

Amount

TOTAL SCHEDULE NO. 1

Ex-works supply of materials (BoQ1)

TOTAL SCHEDULE NO. 2

Erection, Installation & Commissioning (BoQ2)

TOTAL SCHEDULE NO. 3

Taxes (BoQ3)

M/s T G Enterprise

M/s T G Enterprise

M/s T G Enterprise

M/s T G Enterprise